A label-free and enzyme-free fluorescent aptasensor for sensitive detection of acetamiprid based on AT-rich dsDNA-templated copper nanoparticles

Novel electrochemiluminescence aptasensor based on AuNPs-ABEI encapsulated TiO2 nanorod for the detection of acetamiprid residues in vegetables

Gold nanoparticles (AuNPs)@N-(4-aminobutyl)-N-ethylisoluminol (ABEI)@Titanium dioxide nanorods (TiO2NRs) were used as sensing materials to produce a unique encapsulated nanostructure aptasensor for the detection of acetamiprid residues in this work. ABEI, an analog of luminol, was extensively used as an electrochemiluminescence (ECL) reagent. The ECL mechanism of ABEI- hydrogen peroxide (H2O2) system had connections to a number of oxygen-centered free radicals. TiO2NRs improved ECL response with high electron transfer and a specific surface area. AuNPs were easy to biolabel and could catalyze H2O2 to enhance ECL signal. AuNPs were wrapped around TiO2NRs by utilizing the reduction property of ABEI to form wrapped modified nanomaterials. The sulfhydryl-modified aptamer bound to the nanomaterial by forming gold-sulfur (Au-S) bonds. The aptamer selectively bound to its target with the addition of acetamiprid, which caused a considerable decrease in ECL intensity and enabled quantitative detection of acetamiprid. The aptasensor showed good stability, repeatability and specificity with a broad detection range (1×10-2-1×103 nM) and a lower limit of detection (3 pM) for acetamiprid residues in vegetables. Overall, this aptasensor presents a simple and highly sensitive method for ECL detecting acetamiprid, with potential applications in vegetable safety monitoring.

Developments in food neonicotinoids detection: novel recognition strategies, advanced chemical sensing techniques, and recent applications

Neonicotinoid insecticides (NEOs) are a new class of neurotoxic pesticides primarily used for pest control on fruits and vegetables, cereals, and other crops after organophosphorus pesticides (OPPs), carbamate pesticides (CBPs), and pyrethroid pesticides. However, chronic abuse and illegal use have led to the contamination of food and water sources as well as damage to ecological and environmental systems. Long-term exposure to NEOs may pose potential risks to animals (especially bees) and even human health. Consequently, it is necessary to develop effective, robust, and rapid methods for NEOs detection. Specific recognition-based chemical sensing has been regarded as one of the most promising detection tools for NEOs due to their excellent selectivity, sensitivity, and robust interference resistance. In this review, we introduce the novel recognition strategies-enabled chemical sensing in food neonicotinoids detection in the past years (2017-2023). The properties and advantages of molecular imprinting recognition (MIR), host-guest recognition (HGR), electron-catalyzed recognition (ECR), immune recognition (IR), aptamer recognition (AR), and enzyme inhibition recognition (EIR) in the development of NEOs sensing platforms are discussed in detail. Recent applications of chemical sensing platforms in various food products, including fruits and vegetables, cereals, teas, honey, aquatic products, and others are highlighted. In addition, the future trends of applying chemical sensing with specific recognition strategies for NEOs analysis are discussed.

Portable multichannel detection instrument based on time-resolved fluorescence immunochromatographic test strip for on-site detecting pesticide residues in vegetables

In this work, a portable multichannel detection instrument based on time-resolved fluorescence immunochromatographic test strip (TRFIS) was proposed for on-site detecting pesticide residues in vegetables. Its hardware consisted of a silicon photodiode and excitation light source array, a mainboard of the lower machine with STMicroelectronics 32 (STM32) and a linear stepping motor. While detecting, cardboard with 6-channel TRFIS was pulled into the cassette by the stepping motor. The peak area of the test (T) line and control (C) line of each TRFIS was sampled and calculated by software, then the concentration of the detected pesticide was obtained according to the ratio of the T to C value. This instrument could sample 6-channel TRFIS within 30 s simultaneously, and it exhibited excellent accuracy with a 2.5% average coefficient of variation for each channel (n = 12). In addition, the TRFIS was constructed by using europium oxide time-resolved fluorescent microspheres to label the monoclonal antibody against acetamiprid and form a fluorescent probe, which was fixed on the binding pad. The TRFIS was used for the detection of acetamiprid in celery cabbage, cauliflower and baby cabbage. This instrument was used to complete the qualitative and quantitative analysis of the TRFIS, so as to enhance the practical application of the detection method. This TRFIS possessed excellent linearity ranging from 0.25 mg kg-1 to 1.75 mg kg-1 for the detection of acetamiprid, and the limit of detection were 0.056-0.074 mg kg-1 in the different vegetable matrix. The platform combines the accuracy and portability of traditional test strips with the highly sensitive and efficient fluorescence intensity recognition function of detection equipment, which shows a great application prospect of multi-channel rapid detection of small molecule pollutants in the field.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Developing a DNA logic gate nanosensing platform for the detection of acetamiprid

This paper reports a novel fluorescence and colorimetric dual-signal-output DNA aptamer based sensor for the detection of acetamiprid residue. Acetamiprid is a new systemic broad-spectrum insecticide with high insecticidal efficiency that is widely used worldwide, but there is a risk of adverse neurological reactions in humans and animals. The dual-mode output principle designed in this paper, consisting of a fluorescence signal and colorimetric signal, is based on the relevant reaction of the special domain of a G-quadruplex, bidding farewell to a classical single-signal output, with a target-recognition cycle used to complete signal amplification through a hybridization chain reaction. Upgraded detection sensitivity and the qualitative and semi-quantitative detection of acetamiprid are achieved based on the fluorescence signal output and visual discrimination observations during colorimetric experiments. This model was applied to the determination of acetamiprid residue in fruits and vegetables. The dual-detection platform further reduced systematic error, with a detection limit of 27.7 pM. When applied in a comparative detection study using three different pesticides, the system shows excellent discrimination specificity and it performs well in actual sample detection and has a fast response time. Designing DNA logic gates that operate in the presence of targets and molecular-switch-based detection platforms also involves the intersection of biology and computational modeling, providing new ideas for biological platforms.

Irradiation-Induced Synthesis of Ag/ZnO Nanostructures as Surface-Enhanced Raman Scattering Sensors for Sensitive Detection of the Pesticide Acetamiprid

Detecting pesticides using techniques that involve simple fabrication methods and conducting the detection at very low levels are challenging. Herein, we report the detection of acetamiprid at the quadrillionth level using surface-enhanced Raman scattering (SERS). The SERS chip comprises Ag nanoparticles deposited on a tetrapod structure of ZnO coated onto indium tin oxide glass (denoted as Ag@ZnO-ITO). Controlled Ag decoration of ZnO occurs via irradiation-induced synthesis. The morphology of the surface plays a significant role in achieving an enhanced SERS performance for acetamiprid detection. 4,4'-Dipyridyl (DPY) is used to investigate synthesis conditions for the chip, leading to an optimal irradiation time of 60 min. Furthermore, the enhancement factor for acetamiprid on Ag@ZnO-ITO is higher than 10⁷. These results demonstrate that SERS sensors have the potential for practical use in acetamiprid detection.

Advanced screening and tailoring strategies of pesticide aptamer for constructing biosensor

The rapid development of aptamers has helped address the challenges presented by the wide existed pesticides contaminations. Screening of aptamers with excellent performance is a prerequisite for successfully constructing biosensors, while further tailoring of aptamers with enhanced activity greatly improved the assay performance. Firstly, this paper reviewed the advanced screening strategies for pesticides aptamers, including immobilization screening that preserves the native structures of targets, non-immobilized screening based on nanomaterials, capillary electrophoresis-systematic evolution of ligands by exponential enrichment (CE-SELEX), virtual screening in silico, high-throughput selection, and rational secondary library generation methods, which contributed significantly to improve the success rate of screening, reduce the screening time, and ensure aptamer binding affinity. Secondly, the precise tailoring strategies for pesticides aptamers were modularly elaborated, containing deletion, splitting, elongation, and fusion, which provided various advantages like cost-efficiency, enhanced binding affinity, and new derived functional motifs. Thirdly, the developed aptamer-based biosensors (aptasensors) for pesticide detection were systematically reviewed according to the different signal output modes. Finally, the challenges and future perspectives of pesticide detection are discussed comprehensively.

A gold nanoparticle-based visual aptasensor for rapid detection of acetamiprid residues in agricultural products using a smartphone

Based on the colorimetric analysis of gold nanoparticles and a smartphone readable strategy, a stable, sensitive, and visual method was established for rapid detection of acetamiprid residues in agricultural products. By optimizing the key parameters, the detection process only took 40 minutes with good specificity. The acetamiprid aptamer can help AuNPs to resist salt-induced aggregation. Conversely, in the presence of acetamiprid, the anti-protection is weakened and the AuNPs aggregated with the color change of the solution. The photographs of the solution are recorded by the smartphone and analyzed through image processing. In the range from 25 to 300 μM the method can realize a quantitative analysis of acetamiprid, and the detection limit is about 3.81 μM. Excellent recoveries are taken in samples of cucumber, cabbage, and river water, ranging from 96.78% to 129.95%. These results show no significant difference from the results obtained by the microplate reader. What's more, the method employs a smartphone to read without the assistance of professional equipment, which greatly reduces the cost of detection, and shows a promising application prospect for on-site rapid detection of acetamiprid.

Based on the colorimetric analysis of gold nanoparticles and a smartphone readable strategy, a stable, sensitive, and visual method was established for rapid detection of acetamiprid residues in agricultural products.

A biosensor based on interchain reactions for the detection of acetamipirid and the construction of basics logic gates OR and AND

An enzyme-free and label-free fluorescent DNA aptasensor was constructed with computer assistance based on thermodynamic deviation driving interchain reactions. In this work, in the presence of target acetamiprid, the released trigger strand C-apt could open hairpin Hp1, which in turn triggered the strand displacement reaction and catalyzed the self-assembly of hairpins Hp1 and Hp2, so that the guanine base rich stem in Hp2 was opened. In the presence of K+ and NMM, the G-rich moiety could form a G-quadruplex and emit strong fluorescence at a specific excitation wavelength. The proposed strategy enables sensitive detection of acetamiprid at concentrations as low as 54.3 pM. Most importantly, computer-assisted analysis of the thermodynamic properties of nucleic acid strands and simulation of the reaction process and conditions of the proposed model before conducting biological experiments theoretically proves this strategy feasible and may simplify subsequent biological experiments. In addition, basic molecular logic gates, including OR and AND, were constructed based on this detection principle, and simulation tests and biological experiments were performed. The final results show that this strategy can not only have some applications in the field of food safety and environmental monitoring, but also provide a certain way for the development of molecular logic computing.

Ultrasensitive and practical chemiluminescence sensing pesticide residue acetamiprid in agricultural products and environment: Combination of synergistically coupled co-amplifying signal and smart interface engineering

Practical detection of single-component pesticide residue at ultra-low concentrations in agricultural products and environment is very important for assessment of environmental risks and protection of human health. Herein, a practical and highly sensitive chemiluminescence (CL) sensing acetamiprid in agricultural products and environmental media was constructed based on the synergistic co-catalysis of graphene oxide (GO)/gold nanoparticles (AuNPs) nanocomposites for luminol CL reaction and the smart interface engineering. ss-DNA could inhibit co-catalysis of GO/AuNPs for luminol CL reaction. Once acetamiprid was added, aptamer conformation changed in dimension and synergistically catalytic amplification signal of GO/AuNPs was restored significantly. The limit of detection was 8.9 pM. High sensitivity could be due to strong signal amplification from synergistic catalysis of GO/AuNPs for CL reaction and perfect regulation of composite interface by DNA dimension. Moreover, the used GO/AuNPs could be stably stored for six months, which was superior to previously reported AuNPs (only half a month). The analysis exhibited excellent selectivity for acetamiprid. The detection results for real samples confirmed reliability in practical application. This analysis is an extremely useful method for monitoring pesticide residues in environment and agricultural products. Synergetic co-catalysis of GO/AuNPs and ingenious interface engineering provide important ideas for other biosensors.

A silver@gold nanoparticle tetrahedron biosensor for multiple pesticides detection based on surface-enhanced Raman scattering

The detection of multiple pesticides in food and environment is of great importance for human health and safety. In this study, the DNA backbone structure and Ag@Au nanoparticles (NPs) to construct a nano-tetrahedron with the help of the surface-enhanced Raman scattering (SERS) effect by controlling the formation of SERS hotspots and subsequently realized the simultaneous detection of multiple pesticides. The DNA aptamers corresponding to the three pesticides of profenofos, acetamiprid and carbendazim were embedded into the three edges of the DNA tetrahedral skeleton, and the tetrahedral corners were connected to modify the Ag@Au NPs with different Raman signaling molecules. When aptamers recognize the related pesticides, the DNA backbone is deformed. Then Ag@Au NPs approach to each other with SERS hotspots formed and the intensity of the Raman signal increased, realizing the detection of the pesticide content. The biosensor constructed from the SERS substrate with higher sensitivity and lower detection limit (profenofos: 0.0021 ng mL^-1; acetamiprid: 0.0046 ng mL^-1; carbendazim: 0.0061 ng mL^-1). The practicability of this proposed method was verified by adding the recovery rate detection and the accuracy of the method was examined by the analysis of the HPLC-MS method. The proposed SERS biosensor could distinguish and detect three pesticides in food and environmental samples with high sensitivity and low detection limit that can be used in practical applications.

Aptamer Recognition-Driven Homogeneous Electrochemical Strategy for Simultaneous Analysis of Multiple Pesticides without Interference of Color and Fluorescence

Credible and simultaneous determination of multiple pesticides is highly desirable for guaranteeing food safety. However, the current methods are limited to significant interference of color and fluorescence or electrode's modification and mainly focus on the analysis of a single pesticide. Herein, we proposed a novel aptamer-based homogeneous electrochemical system for highly sensitive and simultaneous analysis of multiple pesticides based on target pesticide-switched exonuclease III (Exo III)-assisted signal amplification. The recognition of hairpin probes by target pesticides impels the production of pesticide-DNA complexes, which hybridize with electroactive dye-labeled DNA to form double-stranded DNA, subsequently initiating an Exo III-assisted digestion reaction to generate abundant electroactive dye-tagged mononucleotides. In comparison with pesticide deficiency, two higher differential pulse voltammetry (DPV) currents are measured, which rely on the amount of target pesticides. Therefore, simultaneous analysis of two pesticides is realized with limits of detection of 0.0048 and 0.0089 nM, respectively, comparable or superior to those of known methods that focused on a single pesticide. Moreover, the proposed system is successfully employed to simultaneously evaluate the residual level of acetamiprid and profenofos in Brassica chinensis and thus will find more useful applications for pesticide-related food safety.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

Double-enzymes-mediated Fe2+/Fe3+ conversion as magnetic relaxation switch for pesticide residues sensing

It is a great challenge to develop a newly rapid and accurate detection method for pesticide residues. In this work, based on acetylcholinesterase (AChE) and choline oxidase (CHO), a double-enzymes-mediated Fe²⁺/Fe³⁺ conversion as magnetic relaxation switch was explored for the measurement of acetamiprid residue. In the double-enzymes reactions, acetylcholine chloride (ACh) can be catalyzed to produce choline by AChE, which is successively hydrolyzed to betaine and hydrogen peroxide (H₂O₂) by CHO. According to the enzyme inhibition principle, AChE activity will be inactivated in the presence of acetamiprid, thus leading to the less production of H₂O₂. Wherein, Fe²⁺, ACh, AChE and CHO were optimized as the reaction substrates. In the reaction system, acetamiprid can be reflected by the transverse relaxation time (T₂) that related with H₂O₂ mediated Fe²⁺ variations, which was further developed as an enzyme cascade amplification method. The detection linear range is 0.01∼1000 μg mL^-1 (R² = 0.99), and the limit of detection (LOD) is 2.66 ng mL^-1 (S/N = 3, n = 3), behaving a 335-fold improvement in LOD than that of traditional enzyme inhibition method (0.89 μg mL^-1). This method can realize "one-step mixing" detection of acetamiprid, which makes it a promising analytical tool for monitoring pesticide residue in complicated samples.

Novel Au-tetrahedral aptamer nanostructure for the electrochemiluminescence detection of acetamiprid

In this work, an ultrasensitive and selective electrochemiluminescence (ECL) aptasensor with Au-tetrahedral aptamer nanostructure (Au-TAN) for acetamiprid detection was developed, which employed luminescence property of luminol and hydrogen peroxide (H₂O₂) as a co-reactant to apply the prepared Au-TAN to the luminescence systems. Au-TAN was prepared to modify an electrode surface via an Au-S bond to form a stable tetrahedral nanostructure. Fixed on the surface of the working electrode, Au-TAN could not only enhance the function of the aptamer but also boost the sensing performance. At the same time, Au nanoparticles (AuNPs) of the Au-TAN could also catalyze H₂O₂, thereby enhancing the luminescence performance of this aptasensor. The pH of the buffer solution, the concentration of H₂O₂ and the concentration of Au-TAN were optimized. Under the optimal conditions, the aptasensor had a detection limit of 0.0576 pM (S/N = 3), which was lower than those of other aptasensors for acetamiprid detection. Moreover, the weak alkaline environment explored in the experiment could expand its application range. Above all, the proposed method presented a high accuracy and sensitivity.

Label-free hairpin-like aptamer and EIS-based practical, biostable sensor for acetamiprid detection

Acetamiprid (ACE) is a kind of broad-spectrum pesticide that has potential health risk to human beings. Aptamers (Ap-DNA (1)) have a great potential as analytical tools for pesticide detection. In this work, a label-free electrochemical sensing assay for ACE determination is presented by electrochemical impedance spectroscopy (EIS). And the specific binding model between ACE and Ap-DNA (1) was further investigated for the first time. Circular dichroism (CD) spectroscopy and EIS demonstrated that the single strand AP-DNA (1) first formed a loosely secondary structure in Tris-HClO₄ (20 mM, pH = 7.4), and then transformed into a more stable hairpin-like structure when incubated in binding buffer (B-buffer). The formed stem-loop bulge provides the specific capturing sites for ACE, forming ACE/AP-DNA (1) complex, and induced the R_CT (charge transfer resistance) increase between the solution-based redox probe [Fe(CN)₆]^3−/4− and the electrode surface. The change of ΔR_CT (charge transfer resistance change, ΔR_CT = R_CT(after)-R_CT(before)) is positively related to the ACE level. As a result, the AP-DNA (1) biosensor showed a high sensitivity with the ACE concentration range spanning from 5 nM to 200 mM and a detection limit of 1 nM. The impedimetric AP-DNA (1) sensor also showed good selectivity to ACE over other selected pesticides and exhbited excellent performance in environmental water and orange juice samples analysis, with spiked recoveries in the range of 85.8% to 93.4% in lake water and 83.7% to 89.4% in orange juice. With good performance characteristics of practicality, sensitivity and selectivity, the AP-DNA (1) sensor holds a promising application for the on-site ACE detection.

A syringe-aided apta-nanosensing method for colorimetric determination of acetamiprid

A syringe-aided apta-nanosensing method is reported for the colorimetric determination of acetamiprid. The method employs double-stranded (ds) DNA-conjugated gold nanoparticle@magnetic agarose beads, i.e., dsDNA-AuNP@MABs as peroxidase-mimicking composite probes, in which the aptamer is indirectly attached to the AuNP surface through its hybridization with complementary DNA (cDNA). Upon contact with the acetamiprid target, the probes can give perceptible color change due to the possible conformation switch from dsDNA's brush-like to cDNA's 'pancake' regime. An "air-spaced pumping" procedure using a syringe equipped with ring magnets as the operation platform was proposed to facilitate the magnetic separation of the sensing probes. Therefore, the analytical steps can be easily accomplished in a syringe, including probe loading, acetamiprid capture and magnetic separation from crude samples, chromogenic reagent loading and colorimetric visualization. Acetamiprid concentration down to 3.3 ppb can be easily identified by the naked eye. The final solution also can be transferred for quantitative measurement. Under spectrometer, the ratio of the absorbance at 652 nm in the presence and absence of acetamiprid (A/A₀) is linearly related to the acetamiprid concentration in the 0.4-4.5 ppb range. The limit of detection is calculated to be 0.24 ppb. Moreover, satisfactory recoveries ranging from 90.90 to 91.82% with relative standard deviations of ≤2.96% were obtained in analyzing real spiked samples.

Selective determination of non-organophosphorus insecticide using DNA aptamer-based single-use biosensors

In the present study, we developed a disposable aptamer-based biosensor for rapid, sensitive, and reliable detection of acetamiprid (ACE). To improve the sensitivity of the aptasensor, poly-5-amino-2-mercapto-1,3,4-thiadiazole [P(AMT)] and gold nanoparticles (AuNPs) were progressively electrodeposited on the screen-printed electrode (SPE) surface by using cyclic voltammetry (CV) technique. For the determination of ACE, thiol-modified primary aptamer (Apt1) was selected by using the SELEX method and immobilized on the surface of the P(AMT) and AuNPs-modified SPE (SPE/P(AMT)/AuNPs) via AuS bonding. Then, the surface-bound aptamer was incubated with ACE for 45 Min. After that, the biotin-labeled aptamer 2 (Apt2) was interacted with the ACE, then the enzyme-labeled step was performed. In this step, alkaline phosphatase (ALP) was bound to the surface through the interaction between Apt2 labeled with biotin and streptavidin (strep)-ALP conjugate. The determination of ACE was achieved by measuring the oxidation signal of α-naphthol, which is formed on the electrode surface through the interaction of ALP with α-naphthyl phosphate. The working range of the developed aptasensor was determined as 5 × 10^-12 -5 × 10^-10  mol L^-1 with a low limit of detection (1.5 pmol L^-1 ). It was also found that the proposed aptasensor possessed great advantages such as low cost, good selectivity, and good reproducibility.

Exonuclease III-assisted signal amplification strategy for sensitive fluorescence detection of polynucleotide kinase based on poly(thymine)-templated copper nanoparticles

A sensitive and label-free fluorometric method has been developed for the determination of polynucleotide kinase (PNK) activity, by employing exonuclease III (Exo III)-assisted cyclic signal amplification and poly(thymine)-templated copper nanoparticles (polyT-CuNPs). In the presence of PNK, cDNA with 5'-hydroxyl termini was phosphorylated and then hybridized with tDNA to form the cDNA/tDNA duplex, which subsequently triggered the λ exonuclease cleavage reaction, eventually resulting in the release of tDNA. The released tDNA could unfold the hairpin structure of HP DNA to generate partially complementary duplex (tDNA/HP DNA), wherein the HP DNA possessed T-rich sequences (T30) and tDNA recognition sequence. With the help of Exo III digestion, the tDNA was able to initiate the cycle for the generation of T-rich sequences, the template for the formation of fluorescent CuNPs. Conversely, the cDNA could not be cleaved by λ exonuclease without PNK and individual HP DNA could not be hydrolyzed by Exo III. The T-rich sequence was caged in HP DNA, resulting in a weak fluorescence signal. Under optimized conditions, the fluorescence intensity was linearly correlated to a concentration range of 0.001 to 1 U mL-1 with a low detection limit of 2 × 10-4 U mL-1. Considering the intriguing analytical performance, this approach could be explored to screen T4 PNK inhibitors and hold promising applications in drug discovery and disease therapy.

Novel electrochemical aptasensor with dual signal amplification strategy for detection of acetamiprid

In this work, a novel dual signal amplification strategy for aptasensor employing reduced graphene with silver nanoparticles and prussian blue-gold nanocomposites was developed for detection of acetamiprid. To improve the sensitivity of aptasensors, reduced graphene oxide-silver nanoparticles (rGo-AgNPs) were modified on a bare glassy carbon electrode surface, which provided a large specific surface area for subsequent material immobilization and amplified current signal. The electrical signal output and sensitivity of the aptasensor was significantly improved after the immobilization of prussian blue-gold nanoparticles (PB-AuNPs) as a catalyst for the redox reaction. The analysis experiment exhibited that it had super-high sensitivity with a detection limit of 0.30 pM (S/N = 3), which met the requirements of the vast majority of daily leaf vegetable testing. Under optimized conditions, the proposed aptasensor showed a wide linear detection range from 1 pM to 1 μM. This aptasensor also had good stability and high selectivity for acetamiprid detection without an interfering effect of some other pesticides. The proposed aptasensor displayed good recovery rates in real samples, which proposed a new method for constructing electrochemical sensors and provided a novel tool for rapid, sensitive analysis of pesticides with low cost.

Dual amplification in a fluorometric acetamiprid assay by using an aptamer, G-quadruplex/hemin DNAzyme, and graphene quantum dots functionalized with D-penicillamine and histidine

D-penicillamine and histidine-functionalized graphene quantum dot (DPA-GQD-His) was synthesized and applied in a fluorometric method for determination of acetamiprid using a G-quadruplex DNAzyme. At first DNA probe (probe 1) consists of a target-specific aptamer with two arms of DNA segments. Probe 1 was hybridized with DNA probe 2 composed of a single DNA sequence with two split G-rich DNA sequences. This leads to the formation of a triplex-to-G-quadruplex (TPGQ). Next, acetamiprid was hybridized with the aptamer in the TPGQ to release free DNA probe 2. The released probe 2, in the presence of of K⁺, undergoes a structural change into a stem-loop structure (by self-complementary hybridization and Hoogsteen hydrogen bonding) that bears a G-quadruplex structure. This is followed by conjugation with hemin to form the G-quadruplex/hemin DNAzyme. The DNAzyme catalyzes the oxidation of o-phenylenediamine by H₂O₂ to produce a yellow fluorescent product with excitation/emission maxima at 420/560 nm. The oxidation product interacts with DPA-GQD-His to achieve a rapid energy transfer between DPA-GQD-His and oxidation product. This increases the fluorescence of the oxidation product and quenches the fluorescence of DPA-GQD-His. DPA-GQD-His also improves the catalytic activity of DNAzyme towards oxidation of ophenylenediamine oxidization and enhances fluorometric response to acetamiprid. The assay works in the 1.0 fM to 1.0 nM acetamiprid concentration range and has a 0.38 fM detection limit. It was successfully applied to the determination of acetamiprid in tea. Graphical abstractThe study reported one double amplification strategy for ultrasensitive fluorescence detection of acetamiprid in tea with D-penicillamine and histidine-functionalized graphene quantum dots and G-quadruplex/heminDNAzyme. The analtyical method exhibits ultra high sensitivity, selectivity and rapidity of fluorescence response to acetamiprid.

Cryogenic Sample Processing with Liquid Nitrogen for Effective and Efficient Monitoring of Pesticide Residues in Foods and Feeds

With the monitoring of hundreds of pesticides in food and feed, the comminution step is equally crucial as any other to achieve valid results. However, sample processing is often underestimated in its importance and practical difficulty to produce consistent test portions for analysis. The scientific literature is rife with descriptions of microextraction methods, but ironically, sample comminution is often ignored or dismissed as being prosaic, despite it being the foundation upon which the viability of such techniques relies. Cryogenic sample processing using dry ice (-78 °C) is generally accepted in practice, but studies have not shown it to yield representative test portions of <1 g. Remarkably, liquid nitrogen has rarely been used as a cryogenic agent in pesticide residue analysis, presumably as a result of access, cost, and safety concerns. However, real-world implementation of blending unfrozen bulk food portions with liquid nitrogen (-196 °C) using common food processing devices has demonstrated this approach to be safe, simple, fast, and cost-effective and yield high-quality results for various commodities, including increased stability of labile or volatile analytes. For example, analysis of dithiocarbamates as carbon disulfide has shown a significant increase of thiram recoveries (up to 95%) using liquid nitrogen during sample comminution. This perspective is intended to allay concerns among working laboratories about the practical use of liquid nitrogen for improved sample processing in the routine monitoring of pesticide residues in foods and feeds, which also gives promise for feasible test sample size reduction in high-throughput miniaturized methods.