Spectrographic sensors for uranyl detection in the environment

Insights into enhanced immobilization of uranyl carbonate from seawater by Fe-doped MXene

Extracting uranium from seawater not only reduces radioactive contamination in seawater but also provides a source of uranium energy. However, due to the low concentration of uranium in seawater and the high salinity of seawater, extraction of uranium from seawater is challenging. In this work, we demonstrated a simple strategy to synthesize Fe-doped MXene (Fe@Ti3C2Tx) via a hydrothermal method and applied for uranium enrichment in seawater. The Fe@Ti3C2Tx exhibited excellent adsorption performance in high salinity environments. The removal capacity of Fe@Ti3C2Tx was determined to be 526.6 mg/g for UO2(CO3)22- at 328 K with quick reaction equilibrium (∼ 30 min). Kinetic and thermodynamic analyses of UO2(CO3)22- elimination process on Fe@Ti3C2Tx surface revealed it to be a spontaneous and endothermic single-phase elimination process. FT-IR and XPS analyses further indicated that the removal mechanism of UO2(CO3)22- by Fe@Ti3C2Tx was surface complexation. Our study suggests that Fe@Ti3C2Tx can provide a feasible solution for uranium enrichment in seawater.

Heavy Metal-Induced Assembly of DNA Network Biosensor from Double-Loop Hairpin Probes for Ultrasensitive Detection of UO22+ in Water and Soil Samples

The uranyl ion (UO22+) is the most stable form of uranium, which exhibits high toxicity and bioavailability posing a severe risk to human health. The construction of ultrasensitive, reliable, and robust sensing techniques for UO22+ detection in water and soil samples remains a challenge. Herein, a DNA network biosensor was fabricated for UO22+ detection using DNAzyme as the heavy metal recognition element and double-loop hairpin probes as DNA assembly materials. UO22+-activated specific cleavage of the DNAzyme will liberate the triggered DNA fragment, which can be utilized to launch a double-loop hairpin probe assembly among Hab, Hbc, and Hca. Through multiple cyclic cross-hybridization reactions, hexagonal DNA duplex nanostructures (n[Hab•Hbc•Hca]) were formed. This DNA network sensing system generates a high fluorescence response for UO22+ monitoring. The biosensor is ultrasensitive, with a detection limit of 2 pM. This sensing system also displays an excellent selectivity and robustness, enabling the DNA network biosensor to work even in complex water and soil samples with excellent accuracy and reliability. With the advantages of enzyme-free operation, outstanding specificity, and high sensitivity, our proposed DNA network biosensor provides a reliable, simple, and robust method for trace levels of UO22+ detection in environmental samples.

Magnetic MOF Substrates for the Rapid and Sensitive Surface-Enhanced Raman Scattering Detection of Uranyl

With the widespread use of uranium in the nuclear industry, achieving rapid and sensitive detection of uranium contaminants is critical for reducing environmental pollution. Surface-enhanced Raman scattering (SERS), with its high sensitivity and unique fingerprint properties, has been used for the analysis of uranyl. However, the weak affinity of Au for uranyl remains a challenge in the development of spherical Au-based SERS substrates. The metal-organic framework (MOF) material ZIF-8 exhibits excellent adsorption capacity for uranyl and could overcome this limitation. In this study, ZIF-8 porous structures were modified on a magnetic SERS substrate, Fe3O4@SiO2@Au (FA), for the rapid and sensitive detection and analysis of the uranyl species. Uranyl was adsorbed by ZIF-8, allowing ready access to the hot spots in the interstices of Au nanoparticles (AuNPs). Symmetrically stretched vibrating bonds of O═U═O were detected at 829 cm-1 as the characteristic peak of uranyl by surface plasmon resonance between the AuNPs. The ZIF-8 coating had minimal influence on target detection as the detection limit for 4-MPY was only half an order of magnitude lower than before modification. The enhancement factor for uranyl reached 106. The substrate showed excellent sensing performance in a neutral or alkaline environment. It was used to detect uranyl in tap water and river water; rapid separation of the species from the water samples was achieved using an external magnet to extract radioactive waste. The proposed substrate offers a route for monitoring and detecting uranyl contamination and an approach for achieving rapid on-site detection, providing a promising application for environmental contaminant detection.

Design and fabrication of a sensitive electrochemical sensor for uranyl ion monitoring in natural waters based on poly (brilliant cresyl blue)

New insights are proposed into enhancing detection of uranyl ions (UO₂²⁺) by electropolymerization brilliant cresyl blue-modified glassy carbon electrode (PBCB/GCE). The mercury-free PBCB/GCE sensor was applied to determine UO₂²⁺ in water samples by differential pulse adsorptive stripping voltammetry (DPAdSV). The unique combination of the PBCB/GCE and DPAdSV significantly improves sensitivity due to the polymer of high electroactive area and fast electron transfer rate. The DPAdSV current using a 3 mm diameter PBCB/GCE was proportional to the UO₂²⁺ concentration in the range 2.0-90.0 μg·L^-1 (- 0.113 V vs. SCE) with a detection limit of 0.650 μg·L^-1, RSD = 3.1% (n = 10), and 4.5% reproducibility. In addition, the sensitivity for UO₂²⁺ determination was further improved at using an 1 mm diameter PBCB/GCE, which enhances the efficiency of UO₂²⁺ deposition due to its higher current density. The 1 mm diameter PBCB/GCE based on DPAdSV technique could be used to determine uranyl ions in the concentration range 0.20-2.0 μg·L^-1 (- 0.113 V vs. SCE) with a detection limit of 0.067 μg·L^-1, RSD = 5.7 % (n = 10) and 5.4% reproducibility. Hence, the PBCB/GCE is a suitable candidate to substitute the mercury electrode. Graphical abstract.

Synthesis of Metal–Organic Frameworks Quantum Dots Composites as Sensors for Endocrine-Disrupting Chemicals

Hazardous chemical compounds such as endocrine-disrupting chemicals (EDCs) are widespread and part of the materials we use daily. Among these compounds, bisphenol A (BPA) is the most common endocrine-disrupting chemical and is prevalent due to the chemical raw materials used to manufacture thermoplastic polymers, rigid foams, and industrial coatings. General exposure to endocrine-disrupting chemicals constitutes a serious health hazard, especially to reproductive systems, and can lead to transgenerational diseases in adults due to exposure to these chemicals over several years. Thus, it is necessary to develop sensors for early detection of endocrine-disrupting chemicals. In recent years, the use of metal–organic frameworks (MOFs) as sensors for EDCs has been explored due to their distinctive characteristics, such as wide surface area, outstanding chemical fastness, structural tuneability, gas storage, molecular separation, proton conductivity, and catalyst activity, among others which can be modified to sense hazardous environmental pollutants such as EDCs. In order to improve the versatility of MOFs as sensors, semiconductor quantum dots have been introduced into the MOF pores to form metal–organic frameworks/quantum dots composites. These composites possess a large optical absorption coefficient, low toxicity, direct bandgap, formidable sensing capacity, high resistance to change under light and tunable visual qualities by varying the size and compositions, which make them useful for applications as sensors for probing of dangerous and risky environmental contaminants such as EDCs and more. In this review, we explore various synthetic strategies of (MOFs), quantum dots (QDs), and metal–organic framework quantum dots composites (MOFs@QDs) as efficient compounds for the sensing of ecological pollutants, contaminants, and toxicants such as EDCs. We also summarize various compounds or materials used in the detection of BPA as well as the sensing ability and capability of MOFs, QDs, and MOFs@QDs composites that can be used as sensors for EDCs and BPA.

Recent Advances on DNAzyme-Based Biosensors for Detection of Uranyl

Nuclear facilities are widely used in fields such as national defense, industry, scientific research, and medicine, which play a huge role in military and civilian use. However, in the process of widespread application of nuclear technology, uranium and its compounds with high carcinogenic and biologically toxic cause a lot of environmental problems, such as pollutions of water, atmosphere, soil, or ecosystem. Bioensors with sensitivity and specificity for the detection of uranium are highly demand. Nucleic acid enzymes (DNAzyme) with merits of high sensitivity and selectivity for targets as excellent molecular recognition elements are commonly used for uranium sensor development. In this perspective review, we summarize DNAzyme-based biosensors for the quantitative detection of uranyl ions by integrating with diverse signal outputting strategies, such as fluorescent, colorimetry, surface-enhanced Raman scattering, and electrochemistry. Different design methods, limit of detection, and practical applications are fully discussed. Finally, the challenges, potential solutions, and future prospects of such DNAzyme-based sensors are also presented.

A Multifunctional Porous Uranyl Phosphonate Framework for Cyclic Utilization: Salvages, Uranyl Leaking Prevention, and Fluorescent Sensing

The material for managing and monitoring waste made from the waste itself is an excellent example of cyclic utilization, which could reduce issues and be more sustainable. A three-dimensional porous uranyl phosphonate MOF (UPF-105) was synthesized via a hydrothermal method. UPF-105 is stable in aqueous solution with pH in the range of 1-11 and maintains crystallinity below 215 °C. The uncoordinated phosphonate groups in the channels act as functional anchors to selectively capture uranyl ions, with a maximum uranium adsorption capacity of 170.23 mg g^-1. The fluorescence of UPF-105 makes it a good candidate for a uranyl ion sensor in uranium-contaminated solutions with concentrations in the range of 5-90 ppm.

Hydrophobic core formation and secondary structure elements in uranyl(VI)-binding peptides

Cyclic peptides as well as a modified EF-hand motif of calmodulin have been newly designed to achieve high affinity towards uranyl(VI). Cyclic peptides may be engineered to bind uranyl(VI) to its backbone under acidic conditions, which may enhance its selectivity. For the modified EF-hand motif of calmodulin, strong electrostatic interactions between uranyl(VI) and negatively charged side chains play an important role in achieving high affinity; however, it is also essential to have a secondary structure element and formation of hydrophobic cores in the metal-bound state of the peptide.

Application of carbon dots and their composite materials for the detection and removal of radioactive ions: A review

Radioactive ions with high-heat release or long half-life could cause long-term influence on environment and they might enter the food chain to damage human body for their toxicity and radioactivity. It is of great importance to develop methods and materials to detect and remove radioactive ions. Carbon dots and their composite materials has been applied widely in many fields due to their plentiful raw materials, facile synthesis and functional process, unique optical property and abundant functional groups. This comprehensive review focuses on the preparation of CDs and composite materials for the detection and adsorption of radioactive ions. Firstly, the recent-developed synthetic methods for CDs were summarized briefly, including hydrothermal/solvothermal, microwave, electrochemistry, microplasma, chemical oxidation methods, focusing on the influence of CDs properties. Secondly, the synthetic methods for CDs composite materials were classified to four categories and summarized generally. Thirdly, the application of CDs for radioactive ions detection and adsorption were explored and concluded including uranium, iodine, europium, strontium, samarium et al. Finally, the detection and adsorption mechanism for radioactive ions were searched and the perspective and outlook of CDs for detection and adsorption radioactive ions have been proposed based on our understanding.

Facile synthesis of Ag@C@Ag hybrid nanoparticles as SERS substrate

Ag@C core-shell nanoparticles (NPs) were first prepared by a low-temperature heating-stirring method and subsequently modified with polyethyleneimine (PEI) at different concentrations. Finally, Ag@C@Ag hybrid NPs were prepared by a simple self-assembly procedure, and 24-nm Ag NPs were attached onto the surface of the initially fabricated PEI-modified Ag@C NPs via interaction between the NH₂ groups of PEI and Ag. The results demonstrated that rhodamine 6G (R6G) could be detected at a concentration as low as 10^-10 M using the Ag@C@Ag NPs as a substrate. To further understand the signal enhancement mechanism, finite-difference time-domain (FDTD) simulations were performed to calculate the electromagnetic field distributions and illustrate the generated Raman hot spots. The FDTD indicated that this enhancement was attributed to the surface plasmon resonance effects of the core Ag NPs in the Ag@C NPs, hot spots between the Ag@C NPs, and external assembly of the 24-nm Ag NPs, as well as between the massive outlayer 24-nm Ag NPs themselves. These fabricated materials were further applied for the detection of folic acid as an actual sample. The outstanding performance of the Ag@C@Ag NPs can be attributed to both the excellent properties of this hybrid substrate and the absorption capability of the carbon layer. Thus, this Ag@C@Ag NP material demonstrates excellent and stable optical properties, and can be used as a surface-enhanced Raman scattering (SERS) substrate in the field of ultrasensitive spectral analysis. Graphical abstract Ag@C@Ag hybrid nanoparticles are prepared by a simple self-assembly method. Then the synthesized Ag@C@Ag hybrid nanoparticles are used as SERS substrate for folic acid detection. To further understand the signal enhancement mechanism, finite-difference time-domain simulations are performed to calculate the electromagnetic field distributions and illustrate the generated SERS hot spots.

An ultrasensitive ratiometric fluorescent probe for the detection of Hg2+ and its application in cell and zebrafish

Mercury is a highly toxic metal element, and the accumulation of mercury in the human body can cause great harm, including but not limited to brain damage, kidney damage and behavioral disorders. Therefore, an effective way to detect mercury ions in the environment is urgently needed. In this study, a novel fluorescent probe (CP-Hg) was synthesized with coumarin as the fluorophore and propanethiol as the recognition receptor. The probe was characterized with high sensitivity (detection limit is approximately 0.5 nM) and selectivity. Note that the probe can react with mercury ions with a distinct color change. In addition, it has been proved to have low toxicity and successfully applied to detect mercury in water samples, macrophages and zebrafish model.

Specific Recognition of Uranyl Ion Employing a Functionalized Nanochannel Platform for Dealing with Radioactive Contamination

Radioactive contamination is a highly concerning global environmental issue along with the development of the nuclear industry. On account of sophisticated operations and high cost of instrument detection methods, numerous efforts have been focused on rapid and simple detection of pollution elements and uranium is the most common one. It is an enormous challenge to push the limit of determination as low as possible while carrying out ultrasensitive detection. Here, we report an intelligent platform based on functionalized solid nanochannels to monitor ultratrace uranyl ions. The platform has a detection limit of 1 fM, which is far below the value that traditional instrumental methods can reach. What is more, the system also exhibits uranyl removal property. The mesenchymal stem cells cultivated in media containing uranyl can achieve excellent viability in the presence of the membranes. This work provides a new choice for handling global radioactive contamination of water.