Enhanced electrochemiluminescence by ZnO nanowires for taurine determination

Identification of taurine biomarker in human biofluids using plasmonic patterns of silver nanostructure

Taurine is now widely used as a new biomarker for cardiovascular and neurodegenerative diseases. This study discusses the importance of accurately determining taurine biomarker levels in various tissues and fluids for the early diagnosis of important pathologies and diseases. Current methods for taurine analysis face challenges such as low sensitivity, lack of selectivity, and complex procedures. Therefore, an efficient analytical method/technique is urgently needed by clinicians. A new paper-based photochemical method using triangular silver nanoparticles (TA-AgNPs) as optical nanoprobes was developed to detect taurine in human blood plasma and urine samples. This method involves a chemical reaction between taurine and TA-AgNPs, leading to a color change at pH 4.8, which is detected using a paper-based colorimetry (PCD) assay. The reaction is further confirmed by UV-visible spectrophotometry as the interaction between taurine and TA-AgNPs causes a significant change in the absorption spectrum, enabling the rapid and reliable measurement of this important biomarker with a detection limit of less than 0.2 μM to 20 mM. The method has been successfully applied to bioanalyzing taurine in human body fluids. Additionally, it requires optimized single-drop paper/parafilm-based colorimetric devices (OD-PCDs) for in situ and on-demand taurine analysis. This study represents the first use of TA-AgNPs for the specific and sensitive detection of taurine in real samples. The sensor design allows for the direct quantification of biomarkers in biological samples without the need for derivatization procedures or sample preparation. The simplicity and portability of OD-PCDs make them promising for tracking and monitoring. This method is expected to contribute to improving environmental health and occupational safety and represents a significant advancement in colorimetric analysis for the sensitive and selective detection of taurine, potentially providing a platform for the identification of taurine and other biomarkers.

ZnO nanostructures: A promising frontier in immunosensor development

This review addresses the design of immunosensors, which employ ZnO nanostructures. Various methods of modifying ZnO nanostructures with antibodies or antigens are discussed, including covalent and non-covalent approaches and cross-linking techniques. Immunosensors based on different properties of ZnO nanomaterials are described and compared. This article provides a comprehensive review of electrochemical immunosensors based on ZnO nanostructures and various detection techniques, including cyclic voltammetry (CV), differential pulse voltammetry (DPV), photoelectrochemical (PEC) detection, electrochemical impedance spectroscopy (EIS), and other electrochemical methods. In addition, this review article examines the application of optical detection techniques, including photoluminescence (PL) and electrochemiluminescence (ECL), in the development of immunosensors based on ZnO nanostructures.

Study of an Ultrasensitive Label-Free Electrochemiluminescent Immunosensor Fabricated with a Composite Electrode for Detecting the Glutamate Decarboxylase Antibody

Antibody testing for the glutamic acid decarboxylase 65 antibody (GADA) is widely used as a golden standard for autoimmune diabetes diagnosis, while current methods for antibody testing are not sensitive enough for clinical usage. Here, a label-free electrochemiluminescent (ECL) immunosensor for detecting GADA in autoimmune diabetes is fabricated and investigated. In the designed immunosensor, a composite film including the multiwalled carbon nanotubes (MWCNTs), zinc oxide (ZnO), and Au nanoparticles (AuNPs) was prepared through nanofabrication processes to improve the performance of sensor. The MWCNTs, which can provide a larger specific surface area, ZnO as a good photocatalytic material, and AuNPs that can enhance the ECL signal of luminol and immobilize the GAD65 antigen were applied to prefunctionalize indium tin oxide (ITO) glass based on a nanofabrication process. The GADA concentration was detected using the ECL immunosensor after incubating with GAD65 antigen-coated prefunctionalized ITO glass. After a direct immunoreaction, it is found that the degree of decreased ECL intensity has a good linear regression toward the logarithm of the GADA concentration in the range of 0.01 to 50 ng mL^-1 with a detection limit down to 10 pg mL^-1. Human serum samples positive or negative for GADA all nicely fell in the expected area. The fabricated immunosensor with excellent sensitivity, specificity, and stability has potential capability for clinical usage in GADA detection.

Encapsulation and antibacterial studies of goji berry and garlic extract in the biodegradable chitosan

As known, the chitosan is a biodegradable biopolymer with antibacterial properties, therefore it is used in the fields of pharmacy, medical, wastewater treatment, biotechnology, cosmetics, textiles, and agriculture. Apart from these, the chitosan has an important place in the food industry with its widespread use. In this research article, the chitosan were encapsulated with the taurine and garlic extracts by the spray dryer. The CSA and CSB compounds synthesized as final products were analyzed by Fourier transformed infrared spectroscopy (FTIR) and High Performance Liquid Chromatography (HPLC). The effect of the encapsulation process on the molecular weight of the polymer structure was investigated using the cryoscopy method. The compound CSA represents 1/2 encapsulation of chitosan with taurine and increased garlic extracts, respectively, while CSB represents 1/1 encapsulation of chitosan with increased taurine and fixed garlic extracts. The % antioxidant activity of the final products was determined by DDPH method. The inhibition zone and surface activity proporties of the CSA and CSB were carried out against Listeria monocytogenes, Staphylococcus aureus, E. coli, and Salmonella bacteria. The results obtained as a result of the analyzes were evaluated, and optimum values were determined for use in food packaging.

A portable electrochemiluminescence aptasensor for β-lactoglobulin detection

Cow’s milk allergy is one of the most common food allergies in children with a prevalence of around 2.5%. Milk contains several allergens; the main ones are caseins and β-lactoglobulin (β-LG). At regulatory level, β-LG is not explicitly named, but milk is included in the list of substances or products causing allergies or intolerances. Hence, the presence of β-LG can be a useful marker for determining the presence of milk in food. In this work, we present an aptasensor based on electrochemiluminescence (ECL) for the quantification of β-LG in real food matrices displaying integrated advantages consisting of high specificity, good sensitivity, portability, and cost effectiveness. The performance and applicability of this sensor were tested by analyzing a sample of skimmed milk and an oat-based drink proposed as a vegetable substitute for milk of animal origin. We obtained a linear correlation between the intensity of the signal and the concentration of β-LG standard solutions (y = x * 0.00653 + 1.038, R² = 0.99). The limit of detection (LOD) and the limit of quantification (LOQ) were found to be 1.36 and 4.55 μg L⁻¹, respectively.

Electrophoretic determination of taurine

An electrophoretic method (on-line coupled capillary isotachophoresis and capillary zone electrophoresis) with conductometric detection for the determination of free taurine in selected food and feed is described. Taurine is converted to isethionic acid by van Slyke method. Under optimized conditions (leading electrolyte: 5 mM HCl, 10 mM glycylglycine, and 0.05% 2-hydroxyethyl cellulose solution, pH 3.2; terminating electrolyte: 10 mM citric acid; background electrolyte: 50 mM acetic acid, 20 mM glycylglycine, and 0.1% 2-hydroxyethyl cellulose solution, pH 3.7), isethionic acid is separated from other sample components in anionic mode and detected using a conductimeter within 15 minutes. The performance method characteristics, such as linearity (25 - 1250 ng/mL), accuracy (99 ± 9%), repeatability (3.9%), reproducibility (4.3%), limits of detection (3 ng/mL) and quantification (10 ng/mL) were evaluated. By analysing 20 food and pet food samples the method was proved suitable for routine analysis. High sensitivity and selectivity, short analysis time and low costs are significant features of the presented method.

Electrochemiluminescence Biosensors Using Screen-Printed Electrodes

Electrogenerated chemiluminescence (also called electrochemiluminescence (ECL)) has become a great focus of attention in different fields of analysis, mainly as a consequence of the potential remarkably high sensitivity and wide dynamic range. In the particular case of sensing applications, ECL biosensor unites the benefits of the high selectivity of biological recognition elements and the high sensitivity of ECL analysis methods. Hence, it is a powerful analytical device for sensitive detection of different analytes of interest in medical prognosis and diagnosis, food control and environment. These wide range of applications are increased by the introduction of screen-printed electrodes (SPEs). Disposable SPE-based biosensors cover the need to perform in-situ measurements with portable devices quickly and accurately. In this review, we sum up the latest biosensing applications and current progress on ECL bioanalysis combined with disposable SPEs in the field of bio affinity ECL sensors including immunosensors, DNA analysis and catalytic ECL sensors. Furthermore, the integration of nanomaterials with particular physical and chemical properties in the ECL biosensing systems has improved tremendously their sensitivity and overall performance, being one of the most appropriates research fields for the development of highly sensitive ECL biosensor devices.