Preparation of 3D assembly of mono layered molybdenum disulfide nanotubules for rapid screening of carbamate pesticide diethofencarb

Emerging carbonate anion intercalated- ZnCr-layered double hydroxide/vanadium carbide nanocomposite: Sustainable design strategies based on disposal electrochemical sensor for diethofencarb fungicide monitoring

Diethofencarb (DFC) is widely used in agriculture to fight against plant fungal attacks and enhance food crop production. On the other hand, the National food safety standard has set the overall maximum residual limit (MRL) of DFC to be 1 mg/kg. Hence it becomes essential to limit their usage, and it is vital to quantify the amount of DFC present in real-life samples to safeguard the health and environmental well-being. Here, we introduce a simple hydrothermal procedure for preparing vanadium carbide (VC) anchored by ZnCr-LDH. The sustainably designed electrochemical sensor for the detection of DFC portrayed high electro-active surface area, conductivity, rapid-electron transport ratio, and high ion diffusion parameters. The obtained structural and morphological information confirms the enriched electrochemical activity of the ZnCr-LDH/VC/SPCE towards DFC. The ZnCr-LDH/VC/SPCE electrode has displayed exceptional characteristics with DPV resulting in a vast linear response (0.01-228 μM), and lower LOD (2 nM) with high sensitivity. Real-sample analysis was carried out to demonstrate the specificity of the electrode with an acceptable recovery in both water (±98.75-99.70%) and tomato (±98.00-99.75%) samples.

Current electroanalytical approaches in the carbamates and dithiocarbamates determination

Pesticides are a suitable tool for controlling plagues and disease vectors. However, their inappropriate use allows for contamination of the environment, soil, water, and foods. Carbamates and dithiocarbamates pesticides present accumulative effects in the human body resulting in hormonal, neurological and reproductive disorders, and some are still suspected or proven to give carcinogenic or mutagenic effects. This review provides a current electroanalytical approach in the carbamates and dithiocarbamates determination, showing the use of voltammetric techniques such as amperometry, cyclic and linear scan, differential pulse, and square wave voltammetry, indicating their advantages, disadvantages, and perspectives in electroanalytical detection of carbamates and dithiocarbamates in natural water and foods. Also are reported the different materials used in the preparation of working electrodes since their choice has an important impact on the success of the analytical applications, resulting in suitable sensitivity, selectivity, stability, and robustness.

Integration of Bismuth sulfide/functionalized halloysite nanotube composite: An electrochemical tool for diethofencarb analysis

Diethofencarb (DFC) is a fungicide used in agricultural fields and it's overe use makes a negative impact in the real-time environment. Here in this work, a semi-conductive urchin like Bismuth sulfide (Bi₂S₃) anchored with tubular structure functionalized halloysite nanotube (F-HNT) was hydrothermally synthesized and used for the electrochemical detection of DFC. Various analytical and microscopic techniques were used to analyze the structure, crystalline nature, and purity of the as-prepared F-HNT@Bi₂S₃. Moreover, the cyclic voltammetry technique was used to analyze the electrochemical studies of the F-HNT@Bi₂S₃ modified glassy carbon electrode (GCE). A high synergetic relationship between the Bi₂S₃ and F-HNT provides a large surface area and better detection of DFC. The amperometry i-t technique result shows that the prepared composite exhibits a wide linear range of 0.0053-526.62 μg L^-1, a low detection limit of 0.0032 μg L^-1, and very good stability over 2000 s. Notably, our proposed sensor can determine the DFC spiked tomato and water samples with a high recovery range and proven the viability for real-time analysis. Finally, all the above-mentioned study results prove that the F-HNT@Bi₂S₃ could be used as an electrochemical probe for the detection of DFC.

Mercury ion-engineering Au plasmonics on MoS2 layers for absorption-shifted optical sensors

Semiconducting MoS₂ layers offer the electrons, reducing conjugated Au(I) to Au atoms, and sebsequently serve as desirable substrates for supporting the interfacial growths of gold nanostructures. Au-covering MoS₂ heterostructures perform morphology-varied optical characteristics, and the surface engineering of MoS₂ involved by Hg²⁺ ions results in the differential growths of nanostructures and morphological diversities. Naked-eye colorimetric responses to mercury ions, with a low limit of detection of 1.27 nM, are achieved based on the in situ grown heterostructures.

Using Post-graphene 2D Materials to Detect and Remove Pesticides: Recent Advances and Future Recommendations

Detection and removal of pesticides have become increasingly imperative as the widespread production and use of pesticides severely contaminate soil and groundwater and cause serious problems to non-target species such as human and animals. Recently, new two-dimensional materials beyond graphene (e.g., transition metal dichalcogenides, layered double hydroxides), called post-graphene two-dimensional materials (pg-2DMs), have exhibited promising potentials in detecting and removing pesticides due to their unique physiochemical attributes such as high photocatalytic activity and large specific surface area. This review summarizes the recent advances of utilizing pg-2DMs to detect, degrade and adsorb pesticides (e.g., thiobencarb, methyl parathion, paraquat). The current gaps and future prospects of this field are discussed as well.

2D Ti3C2Tx flakes prepared by in-situ HF etchant for simultaneous screening of carbamate pesticides

Present work reports preparation of colloidal single/few layer Ti₃C₂T_x MXene flakes using minimally intensive layer delamination (MILD) method for rapid electroanalytical screening of carbamate pesticides. Lithium fluoride salt and hydrochloric acid (7.5 M LiF/9M HCl) was used to produce in-situ generated HF as etchant to remove Al successfully from Ti₃AlC₂ MAX phase. Unlike the clay method (5 M LiF/6M HCl), this methodology simplified Ti₃C₂T_x synthesis protocol resulting in Li⁺ ions intercalated Ti₃C₂T_x which was delaminated without further sonication. The delaminated Ti₃C₂T_x flakes were found to be single/few layered sheets with mostly -OH and -O terminated surface groups. The characteristic 002 peak observed in X-ray diffraction (XRD) at 2θ = 6.4° with interplaner distance of 1.1137 nm suggested broadening of the peak attributed to the presence of Li⁺ ions between Ti₃C₂T_x flakes. Delaminated Ti₃C₂T_x flakes were utilized as working electrode which demonstrated simultaneous and selective detection of carbamate pesticides methiocarb and diethofencarb by voltammetry. The oxidation peaks of the two pesticides were well separated by a potential difference of 0.35 V in 0.5 M H₂SO₄ and DPV detection limits were calculated as 0.19 μg mL^-1 and 0.46 μg mL^-1 for methiocarb and diethofencarb respectively. Ti₃C₂T_x flakes as electrochemical sensor exhibited long term stability and acceptable recoveries in real sample for environmental applications.

Synergizing Functional Nanomaterials with Aptamers Based on Electrochemical Strategies for Pesticide Detection: Current Status and Perspectives

Owing to the high toxicity and large-scale use of pesticides, it is imperative to develop selective, sensitive, portable, and convenient sensors for rapid monitoring of pesticide. Therefore, the electrochemical detection platform offers a promising analytical approach since it is easy to operate, economical, efficient, and user-friendly. Meanwhile, with advances in functional nanomaterials and aptamer selection technologies, numerous sensitivity-enhancement techniques alongside a widespread range of smart nanomaterials have been merged to construct novel aptamer probes to use in the biosensing field. Hence, this study intends to highlight recent development and promising applications on the functional nanomaterials with aptamers for pesticides detection based on electrochemical strategies. We also reviewed the current novel aptamer-functionalized microdevices for the portability of pesticides sensors. Furthermore, the major challenges and future prospects in this field are also discussed to provide ideas for further research.

A novel electrochemical platform based on mesoporous silica/titania and gold nanoparticles for simultaneous determination of norepinephrine and dopamine

An amorphous and mesoporous silica/titania (SiTi) material was synthesized by sol-gel method and its surface was modified with gold nanoparticles (AuNP) previously stabilized in a chitosan solution. The presence of small AuNP, with diameter lower than 10 nm was confirmed by transmission electron microscopy (TEM) and UV-Vis spectroscopy. Carbon paste electrodes were prepared to test the electrochemical properties by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in [Fe(CN)₆]^3-/4- solution probe whereby the material silica-titania/gold nanoparticles (SiTi/AuNP) showed a huge improvement in the redox peak current and low charge transfer resistance. This electrode presented a good response for both norepinephrine and dopamine by means of square wave voltammetry (SWV) measurements; great sensitivity for both analytes, in an extensive linear range, was obtained. The limits of detection were 0.35 μmol L^-1 and 0.57 μmol L^-1 for norepinephrine and dopamine, respectively. Additionally, this electrode showed high selectivity for both analytes and it was applied in the simultaneous determination of norepinephrine and dopamine. The sensor was also tested in simulated biological fluids presenting a good recovery. The SWV electrochemical response of norepinephrine was also investigated in the presence of possible interferers such as uric acid, ascorbic acid and glucose and there was no significant interference. The prepared electrode also exhibits good reproducibility for norepinephrine detection, with relative standard deviation of 5.19%.

Sensors Applied for the Detection of Pesticides and Heavy Metals in Freshwaters

Water is essential for every life living on the planet. However, we are facing a more serious situation such as water pollution since the industrial revolution. Fortunately, many efforts have been done to alleviate/restore water quality in freshwaters. Numerous sensors have been developed to monitor the dynamic change of water quality for ecological, early warning, and protection reasons. In the present review, we briefly introduced the pollution status of two major pollutants, i.e., pesticides and heavy metals, in freshwaters worldwide. Then, we collected data on the sensors applied to detect the two categories of pollutants in freshwaters. Special focuses were given on the sensitivity of sensors indicated by the limit of detection (LOD), sensor types, and applied waterbodies. Our results showed that most of the sensors can be applied for stream and river water. The average LOD was72.53±12.69 ng/ml (n=180) for all pesticides, which is significantly higher than that for heavy metals (65.36±47.51 ng/ml,n=117). However, the LODs of a considerable part of pesticides and heavy metal sensors were higher than the criterion maximum concentration for aquatic life or the maximum contaminant limit concentration for drinking water. For pesticide sensors, the average LODs did not differ among insecticides (63.83±17.42 ng/ml,n=87), herbicides (98.06±23.39 ng/ml,n=71), and fungicides (24.60±14.41 ng/ml,n=22). The LODs that differed among sensor types with biosensors had the highest sensitivity, while electrochemical optical and biooptical sensors showed the lowest sensitivity. The sensitivity of heavy metal sensors varied among heavy metals and sensor types. Most of the sensors were targeted on lead, cadmium, mercury, and copper using electrochemical methods. These results imply that future development of pesticides and heavy metal sensors should (1) enhance the sensitivity to meet the requirements for the protection of aquatic ecosystems and human health and (2) cover more diverse pesticides and heavy metals especially those toxic pollutants that are widely used and frequently been detected in freshwaters (e.g., glyphosate, fungicides, zinc, chromium, and arsenic).

Nickel oxide decorated MoS2nanosheet-based non-enzymatic sensor for the selective detection of glucose

Understanding blood glucose levels in our body can be a key part in identifying and diagnosing prediabetes. Herein, nickel oxide (NiO) decorated molybdenum disulfide (MoS₂) nanosheets have been synthesized via a hydrothermal process to develop a non-enzymatic sensor for the detection of glucose. The surface morphology of the NiO/MoS₂ nanocomposite was comprehensively investigated by field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS) and Brunauer–Emmett–Teller (BET) analysis. The electro-catalytic activity of the as-prepared NiO/MoS₂ nanocomposite towards glucose oxidation was investigated by cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and amperometry in 0.1 M NaOH. The NiO/MoS₂ nanocomposite-based sensor showed outstanding electrocatalytic activity for the direct electro-oxidation of glucose due to it having more catalytic active sites, good conductivity, excellent electron transport and high specific surface area. Meanwhile, the NiO/MoS₂ modified glassy carbon electrode (GCE) showed a linear range of glucose detection from 0.01 to 10 mM by amperometry at 0.55 V. The effect of other common interferent molecules on the electrode response was also tested using alanine, l-cysteine, fructose, hydrogen peroxide, lactose, uric acid, dopamine and ascorbic acid. These molecules did not interfere in the detection of glucose. Moreover, this NiO/MoS₂/GCE sensor offered rapid response (2 s) and a wide linear range with a detection limit of 1.62 μM for glucose. The reproducibility, repeatability and stability of the sensor were also evaluated. The real application of the sensor was tested in a blood serum sample in the absence and presence of spiked glucose and its recovery values (96.1 to 99.8%) indicated that this method can be successfully applied to detect glucose in real samples.

This study reported that NiO/MoS₂ based nanocomposite can be used as an electrocatalytic material to detect glucose with high selectivity in a blood serum.