CdS:Mn-sensitized 2D/2D heterostructured g-C3N4-MoS2 with excellent photoelectrochemical performance for ultrasensitive immunosensing platform

Two-Dimensional Layered Heterojunctions for Photoelectrocatalysis

Two-dimensional (2D) layered nanomaterial heterostructures, arising from the combination of 2D materials with other low-dimensional species, feature a large surface area to volume ratio, which provides a high density of active sites for catalytic applications and for (photo)electrocatalysis (PEC). Meanwhile, their electronic band structure and high electrical conductivity enable efficient charge transfer (CT) between the active material and the substrate, which is essential for catalytic activity. In recent years, researchers have demonstrated the potential of a range of 2D material interfaces, such as graphene, graphitic carbon nitride (g-C3N4), metal chalcogenides (MCs), and MXenes, for (photo)electrocatalytic applications. For instance, MCs such as MoS2 and WS2 have shown excellent catalytic activity for hydrogen evolution, while graphene and MXenes have been used for the reduction of carbon dioxide to higher value chemicals. However, despite their great potential, there are still major challenges that need to be addressed to fully realize the potential of 2D materials for PEC. For example, their stability under harsh reaction conditions, as well as their scalability for large-scale production are important factors to be considered. Generating heterojunctions (HJs) by combining 2D layered structures with other nanomaterials is a promising method to improve the photoelectrocatalytic properties of the former. In this review, we inspect thoroughly the recent literature, to demonstrate the significant potential that arises from utilizing 2D layered heterostructures in PEC processes across a broad spectrum of applications, from energy conversion and storage to environmental remediation. With the ongoing research and development, it is likely that the potential of these materials will be fully expressed in the near future.

Electrolyte-Controlled Photoelectrochemical Photocurrent Switching Effect in High-Performance Self-Powered Broadband Photoelectrochemical-Type Photodetectors Based on MnPS3 Nanosheets

Photoelectric devices are extensively applied in optical logic systems, light communication, optical imaging, and so on. However, traditional photoelectric devices can only generate unidirectional photocurrent, which hinders the simplification and multifunctionality of devices. Recently, it has become a new research focus to achieve controllable reversal of the output photocurrent direction (bipolar current) in a photoelectric system. Considering that the device with bipolar current adds a reverse current operating state compared to traditional devices, the former is more suitable for developing new multifunctional photoelectric devices. Due to the existence of electrolytes, photoelectrochemical (PEC) systems contain chemical processes such as ion diffusion and migration and electrochemical reactions, which are unable to occur in solid-state transistor devices, and the effect of electrolyte pH on the performance of PEC systems is usually ignored. We prepared a MnPS3-based PEC-type photodetector and reversed photocurrents by adjusting the pH of electrolytes, i.e., the electrolyte-controlled photoelectrochemical photocurrent switching (PEPS) effect. We clarified the effect of pH values on the direction of photocurrent from the perspectives of electrolyte energy level rearrangement splitting and the kinetic theory of the semiconductor electrode. This work not only contributes to a deeper understanding of carrier transport in PEC processes but also inspires the development of advanced multifunctional photoelectric devices.

Two-Dimensional Graphitic Carbon Nitride (g-C3N4) Nanosheets and Their Derivatives for Diagnosis and Detection Applications

The early diagnosis of certain fatal diseases is vital for preventing severe consequences and contributes to a more effective treatment. Despite numerous conventional methods to realize this goal, employing nanobiosensors is a novel approach that provides a fast and precise detection. Recently, nanomaterials have been widely applied as biosensors with distinctive features. Graphite phase carbon nitride (g-C3N4) is a two-dimensional (2D) carbon-based nanostructure that has received attention in biosensing. Biocompatibility, biodegradability, semiconductivity, high photoluminescence yield, low-cost synthesis, easy production process, antimicrobial activity, and high stability are prominent properties that have rendered g-C3N4 a promising candidate to be used in electrochemical, optical, and other kinds of biosensors. This review presents the g-C3N4 unique features, synthesis methods, and g-C3N4-based nanomaterials. In addition, recent relevant studies on using g-C3N4 in biosensors in regard to improving treatment pathways are reviewed.

Zero-Biased Photoelectrochemical Detection of Cardiac Biomarker Myoglobin Based on CdSeS/ZnS Quantum Dots and Barium Titanate Perovskite

Cardiovascular diseases are considered one of the leading causes of premature mortality of patients worldwide. Therefore, rapid diagnosis of these diseases is crucial to ensure the patient's survival. During a heart attack or severe muscle damage, myoglobin is rapidly released in the body to constitute itself as a precise biomarker of acute myocardial infarction. Thus, we described the photoelectrochemical immunosensor development to detect myoglobin. It was based on fluorine-doped tin oxide modified with CdSeS/ZnSe quantum dots and barium titanate (BTO), designated as CdSeS/ZnSQDS/BTO. It was characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), and amperometry. The anodic photocurrent at the potential of 0 V (vs. Ag/AgCl) and pH 7.4 was found linearly related to the myoglobin (Mb) concentration from 0.01 to 1000 ng mL^-1. Furthermore, the immunosensor showed an average recovery rate of 95.7-110.7% for the determination of myoglobin.

Nanotechnology for cardiovascular diseases

Cardiovascular diseases have become the major killers in today's world, among which coronary artery diseases (CADs) make the greatest contributions to morbidity and mortality. Although state-of-the-art technologies have increased our knowledge of the cardiovascular system, the current diagnosis and treatment modalities for CADs still have limitations. As an emerging cross-disciplinary approach, nanotechnology has shown great potential for clinical use. In this review, recent advances in nanotechnology in the diagnosis of CADs will first be elucidated. Both the sensitivity and specificity of biosensors for biomarker detection and molecular imaging strategies, such as magnetic resonance imaging, optical imaging, nuclear scintigraphy, and multimodal imaging strategies, have been greatly increased with the assistance of nanomaterials. Second, various nanomaterials, such as liposomes, polymers (PLGA), inorganic nanoparticles (AuNPs, MnO2, etc.), natural nanoparticles (HDL, HA), and biomimetic nanoparticles (cell-membrane coating) will be discussed as engineered as drug (chemicals, proteins, peptides, and nucleic acids) carriers targeting pathological sites based on their optimal physicochemical properties and surface modification potential. Finally, some of these nanomaterials themselves are regarded as pharmaceuticals for the treatment of atherosclerosis because of their intrinsic antioxidative/anti-inflammatory and photoelectric/photothermal characteristics in a complex plaque microenvironment. In summary, novel nanotechnology-based research in the process of clinical transformation could continue to expand the horizon of nanoscale technologies in the diagnosis and therapy of CADs in the foreseeable future.

Electroanalytical point-of-care detection of gold standard and emerging cardiac biomarkers for stratification and monitoring in intensive care medicine - a review

Determination of specific cardiac biomarkers (CBs) during the diagnosis and management of adverse cardiovascular events such as acute myocardial infarction (AMI) has become commonplace in emergency department (ED), cardiology and many other ward settings. Cardiac troponins (cTnT and cTnI) and natriuretic peptides (BNP and NT-pro-BNP) are the preferred biomarkers in clinical practice for the diagnostic workup of AMI, acute coronary syndrome (ACS) and other types of myocardial ischaemia and heart failure (HF), while the roles and possible clinical applications of several other potential biomarkers continue to be evaluated and are the subject of several comprehensive reviews. The requirement for rapid, repeated testing of a small number of CBs in ED and cardiology patients has led to the development of point-of-care (PoC) technology to circumvent the need for remote and lengthy testing procedures in the hospital pathology laboratories. Electroanalytical sensing platforms have the potential to meet these requirements. This review aims firstly to reflect on the potential benefits of rapid CB testing in critically ill patients, a very distinct cohort of patients with deranged baseline levels of CBs. We summarise their source and clinical relevance and are the first to report the required analytical ranges for such technology to be of value in this patient cohort. Secondly, we review the current electrochemical approaches, including its sub-variants such as photoelectrochemical and electrochemiluminescence, for the determination  of important CBs highlighting the various strategies used, namely the use of micro- and nanomaterials, to maximise the sensitivities and selectivities of such approaches. Finally, we consider the challenges that must be overcome to allow for the commercialisation of this technology and transition into intensive care medicine.

Sandwich-type photoelectrochemical immunosensor for procalcitonin detection based on Mn2+ doped CdS sensitized Bi2WO6 and signal amplification of NaYF4:Yb, Tm upconversion nanomaterial

In this paper, we constructed a sandwich-type photoelectrochemical (PEC) immunosensor for the quantitative detection of procalcitonin (PCT) based on the sensitization of Mn²⁺ doped CdS (CdS:Mn) nanocomposites to Bi₂WO₆ and the signal amplification effect of an upconversion material NaYF₄:Yb,Tm. Bi₂WO₆ was synthesized with a three-dimensional flowered structure. CdS:Mn reduced the recombination of photogenerated carriers, and significantly improved photocurrent response. Lanthanide-doped upconversion nanomaterials were used as the label of secondary antibody. NaYF₄:Yb,Tm have two functions, not only connected with the secondary antibody, but also can further amplify the photocurrent response. The proposed immunosensor for detecting PCT provided a desired linear range of 0.5 pg mL^-1-100 ng mL^-1 and a detection limit of 0.13 pg mL^-1 under optimal experimental conditions. Besides, the PEC immunosensor demonstrated good reproducibility, specificity and stability. The results of determination of PCT in real human serum samples were satisfactory. Thus, the immunosensor may be applied in the clinical diagnosis of PCT and other biomarkers.

A Novel Photoelectrochemical Aptamer Sensor Based on CdTe Quantum Dots Enhancement and Exonuclease I-Assisted Signal Amplification for Listeria monocytogenes Detection

To achieve the rapid detection of Listeria monocytogenes, this study used aptamers for the original identification and built a photoelectrochemical aptamer sensor using exonuclease-assisted amplification. Tungsten trioxide (WO3) was used as a photosensitive material, was modified with gold nanoparticles to immobilize complementary DNA, and amplified the signal by means of the sensitization effect of CdTe quantum dots and the shearing effect of Exonuclease I (Exo I) to achieve high-sensitivity detection. This strategy had a detection limit of 45 CFU/mL in the concentration range of 1.3 × 101-1.3 × 107 CFU/mL. The construction strategy provides a new way to detect Listeria monocytogenes.

Construction of strontium phosphate/graphitic-carbon nitride: A flexible and disposable strip for acetaminophen detection

A facile technique has been used to synthesize the strontium phosphate interlinked with graphitic carbon nitride nanosheets (SrP/g-CN NSs) nanocomposite for highly selective detection of acetaminophen (AP). The formation of SrP/g-CN NSs nanocomposite is evidenced by several spectroscopic and analytical methods. It was demonstrated that the SrP/g-CN NSs modified screen-printed carbon electrode (SPCE) exhibits excellent catalytic performance with low peak potential towards AP detection than those of pristine SrP-, g-CN NSs-, and bare- SPCEs. The outstanding electrochemical performance can be attributed to the robust synergistic effect between SrP and g-CN NSs. Likewise, g-CN NSs possess a porous multilayer network, which provides a large surface area, fast charge transferability, electrical conductivity, and numerous active sites. Under the optimal conditions, the fabricated sensor could detect AP with a linear relationship range from 0.01 to 370 µM, and the detection limit is calculated to be as low as 2.0 nM. The proposed sensor is successfully used to determine AP in water samples with satisfactory results.

A label-free photoelectrochemical immunosensor for carcinoembryonic antigen detection based on a g-C3N4/CdSe nanocomposite

Herein, a label-free photoelectrochemical immunosensor based on a g-C3N4/CdSe nanocomposite was established and applied to detect carcinoembryonic antigen (CEA). The prepared nanocomposite materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), ultraviolet-visible absorption spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS), fourier transform infrared spectrometer (FT-IR) and photoluminescence spectroscopy (PL). The results indicate that g-C3N4/CdSe nanocomposite materials were successfully synthesized. In a typical assembly process, the immunosensor was constructed by modifying a fluorine-doped tin oxide (FTO) electrode with poly dimethyl diallyl ammonium chloride (PDDA), the g-C3N4/CdSe nanocomposite, the anti-carcinoembryonic antigen antibody (Ab) and the blocking agent bovine serum albumin (BSA) successively. In the presence of CEA, the photocurrent signal of the prepared immunosensor decreased significantly. Accordingly, under the optimal conditions, a label-free photoelectrochemical immunosensor was established, and it exhibited excellent selectivity and repeatability for CEA detection. The detection limit was 0.21 ng mL-1, and the range was 10 ng mL-1-100 μg mL-1. Simultaneously, the immunosensor also provides a likely sensing device for detecting other protein targets, which is of great significance for early clinical diagnosis.

Platinum (II)-doped graphitic carbon nitride with enhanced peroxidase-like activity for detection of glucose and H2O2

A platinum (II)-doped graphitic carbon nitride (Pt²⁺@g-C₃N₄) nanozyme was prepared in this work. Compared to g-C₃N₄, Pt²⁺@g-C₃N₄ shows enhanced peroxidase-like activity. According to DFT calculations and ESR measurements, the Pt on the surface of g-C₃N₄ accelerates the decomposition of H₂O₂ into OH and consequently accelerates TMB oxidation. Furthermore, as a proof of concept, the obtained Pt²⁺_2.30@g-C₃N₄ was applied in the detection of glucose with an LOD of 0.01 mM. The reproducibility and precision tests of the glucose detection method based on Pt²⁺_2.30@g-C₃N₄ show that this method is reliable and feasible for the detection of glucose.