Sorbent and solvent co-enhanced direct analysis in real time-mass spectrometry for high-throughput determination of trace pollutants in water

Online coupling of matrix solid-phase dispersion to direct analysis in real time mass spectrometry for high-throughput analysis of regulated chemicals in consumer products

The current work is the first study on online coupling of matrix solid-phase dispersion (MSPD) to direct analysis in real time mass spectrometry (DART-MS) bridging with solid-phase analytical derivatization (SPAD) based on a graphene oxide nanosheets (GONs)-coated cotton swab. Proof-of-concept demonstrations were explored for high-throughput analysis of a diversity of regulated chemicals in consumer products such as textiles, toys, and cosmetics. On-demand sorbent combinations were blended with samples, packed into MSPD columns, and mounted on a homemade 3D-printed rack module for automated sample feeding. To achieve good synergy between MSPD and DART-MS, a cotton swab with a conical tip deposited with GONs was attached to the bottom of the MSPD column. The swabs serve as a solid-phase microextraction probe for convenient enrichment of the eluted analytes from MSPD, thermal desorption of the enriched analytes by DART, and sensitive detection by a hybrid quadrupole-Orbitrap mass spectrometer. Furthermore, the utility of an on-swab SPAD strategy was demonstrated for the detection of formaldehyde by use of the derivatizing reagent of dansyl hydrazine, contributing to improved ionization efficiency without compromising the overall coherence of the analytical workflow. The MSPD-DART-MS methodology was systematically optimized and validated, obtaining acceptable recovery (71.7-110.3%), repeatability (11.8-19.3%), and sensitivity (limits of detection and quantitation in the ranges of 6.2-19.5 and 23.7-75.9 μg/kg) for 32 target analytes. The developed protocol streamlined sample extraction, clean-up, desorption, ionization, and detection, highlighting the appealing potential for high-throughput analysis of samples with complex matrices.

Influence of host-guest interactions on analytical performance of direct analysis in real-time mass spectrometry

To systematically study the influence of host-guest interactions on the analytical performance of direct analysis in real time mass spectrometry (DART-MS), the interactions between cyclodextrins (CDs) and different Sudan dyes were investigated. The results showed that the host-guest interaction between CDs and Sudan dyes did not affect qualitative analysis of the target compounds, but led to a lower signal intensity for Sudan dyes, thus affecting quantitative analysis of the target compounds. The stronger the host-guest interaction, the weaker the signal intensity of target compound on DART-MS. The results also show that both in solution and in solid-phase microextraction (SPME), the addition of organic solvents can weaken the host-guest interaction between CDs and Sudan dyes, thus improving the signal intensity in DART-MS. In SPME, adding organic solvents has a certain practical value and can improve the efficiency of Sudan dye analysis. This study suggests that appropriate sample pretreatment is needed to weaken noncovalent interactions prior to DART-MS analysis to obtain more accurate quantitative results. The data provide some insight into the effects of other noncovalent interactions on the efficiency of DART-MS as an analytical tool, as well as the potential to study intermolecular interactions with DART-MS.

Plasma-based ambient mass spectrometry: Recent progress and applications

Ambient mass spectrometry (AMS) has grown as a group of advanced analytical techniques that allow for the direct sampling and ionization of the analytes in different statuses from their native environment without or with minimum sample pretreatments. As a significant category of AMS, plasma-based AMS has gained a lot of attention due to its features that allow rapid, real-time, high-throughput, in vivo, and in situ analysis in various fields, including bioanalysis, pharmaceuticals, forensics, food safety, and mass spectrometry imaging. Tens of new methods have been developed since the introduction of the first plasma-based AMS technique direct analysis in real-time. This review first provides a comprehensive overview of the established plasma-based AMS techniques from their ion source configurations, mechanisms, and developments. Then, the progress of the representative applications in various scientific fields in the past 4 years (January 2017 to January 2021) has been summarized. Finally, we discuss the current challenges and propose the future directions of plasma-based AMS from our perspective.

Ambient Ionization Mass Spectrometry: Application and Prospective

Mass spectrometry (MS) is a formidable analytical tool for the analysis of non-polar to polar compounds individually and/or from mixtures, providing information on the molecular weights and chemical structures of the analytes. During the last more than one-decade, ambient ionization mass spectrometry (AIMS) has developed quickly, producing a wide range of platforms and proving scientific improvements in a variety of domains, from biological imaging to quick quality control. These methods have made it possible to detect target analytes in real time without sample preparation in an open environment, and they can be connected to any MS system with an atmospheric pressure interface. They also have the ability to analyze explosives, illicit drugs, disease diagnostics, drugs in biological samples, adulterants in food and agricultural products, reaction progress, and environmental monitoring. The development of novel ambient ionization techniques, such as probe electrospray ionization, paper spray ionization, and fiber spray ionization, employed even at picolitre to femtolitre solution levels to provide femtogram to attogram levels of the target analytes. The special characteristic of this ambient ion source, which has been extensively used, is the noninvasive property of PESI of examination of biological real samples. The results in the current review supports the idea that AIMS has emerged as a pioneer in MS-based approaches and that methods will continue to be developed along with improvements to existing ones in the near future.

Natural Deep Eutectic Solvent-Based Dispersive Liquid-Liquid Microextraction Coupled with Direct Analysis in Real Time Mass Spectrometry: A Green Temperature-Mediated Analytical Strategy

Green analytical chemistry (GAC) represents a rapidly growing research field that aims at developing novel analytical approaches with minimal consumption of hazardous reagents and solvents. The current study reports on a GAC methodology exploiting the unique physicochemical properties of natural deep eutectic solvents (NADESs), a supposedly environmentally friendly class of solvents. Based on a temperature-mediated strategy, the NADESs were manipulated to undergo multiple phase transitions for favorable functionality and performance. As proof-of-concept demonstrations, both hydrophobic and hydrophilic NADESs were prepared for the extraction and analysis of eight phthalate esters in aqueous samples (food simulants) and three aflatoxins in oily samples (edible oils), respectively. NADES-based dispersive liquid-liquid microextraction (DLLME) was employed to achieve high-efficiency sample pretreatment. Afterward, the NADESs were transformed from liquids into solids by tuning the peripheral temperature for a convenient phase separation from the sample matrices. The solidified NADES extracts were melted and vaporized at elevated temperatures by transmission-mode direct analysis in real time (DART) for further quadrupole-Orbitrap high-resolution mass spectrometry (Q-Orbitrap HRMS) analysis. The developed protocol was validated, achieving good repeatability with relative standard deviations (RSDs) of less than 9% and satisfactory sensitivity with limits of detection (LODs) and quantitation (LOQs) ranging from 0.1 to 0.8 and 0.2 to 2.0 μg/kg, respectively. The greenness of the analytical methodology was assessed with the calculated scores of 0.66 and 0.57 for the hydrophobic and hydrophilic NADES-based protocols, respectively. The method was applied to marketed samples, highlighting the great potential for green chemical analysis.

Rapid Analysis of Trace Phthalates by Spray-Inlet Microwave Plasma Torch Ionization-Tandem Mass Spectrometry in Commercial Perfumes

BACKGROUND

The less volatile fraction of perfumes can be easily contaminated by phthalates esters (PAEs) which are endocrine-disrupting chemicals during the production, bottling and transportation processes. It is necessary to establish an innovative and rapid method to determine the trace PAEs in commercial perfumes.

OBJECTIVE

Hence, self-built spray-inlet microwave plasma torch ionization coupled with a quadrupole time-of-flight tandem mass spectrometer (QTOF-MS) was developed for direct analysis of PAEs in perfumes with no sample pretreatment.

METHODS

Perfumes were sprayed to the MPT's flame directly by sampling pump in 10 µL/min and the ions produced by MPT were introduced into QTOF-MS, the MPT worked at 2450 MHz and 40 W in the 800 ml/min flow rate of argon.

RESULTS

For the developed method, excellent linearities were obtained and the correlation coefficient of Di-n-pentyl Phthalate was 0.9799 and the rest were larger than 0.99. The LODs and LOQs were obtained in the ranges of 1.452-18.96 ng/g and 4.839-63.19 ng/g, respectively. The spiked recoveries of PAEs were in the range of 100.1-105.2% with satisfied intra-day RSDs and inter-day RSDs ranging from 1.51-4.34% and 3.45-5.65%, respectively. PAEs in commercial perfumes were successfully detected by spray-inlet MPT-MS2 with low concentrations from 0.036-1.352 µg/g.

CONCLUSIONS

The method is a promising tool in field analysis of PAEs in cosmetic solutions where rapid qualitative and quantitative analysis in needed.

HIGHLIGHTS

The method was satisfactorily applied to the analysis of commercial perfume samples within 30 s, and earned merits such as simplicity, sensitivity, environmental friendliness and ease operation.

Rapid fingerprint analysis for herbal polysaccharides using direct analysis in real-time ionization mass spectrometry

RATIONALE

Herbal polysaccharides have various potential medicinal values. Development of reliable analytical method for the fingerprint analysis of polysaccharides is critical for their quality assessment, origin identification, and authenticity evaluation.

METHODS

Mechanochemical extraction (MCE) was used to extract polysaccharide components from different herbal species. Intact polysaccharides were then directly analyzed by direct analysis in real-time mass spectrometry (DART-MS). Standard addition method with isotope-labeled internal standard was used to quantify polysaccharide amounts directly from liquid extract. Multivariate data analysis was further conducted for species classification.

RESULTS

The intact and large polysaccharides were decomposed into small fragment ions less than m/z 350 instantaneously using DART ion source. Different polysaccharides showed distinguished fingerprint DART-MS spectra using both individual and mixed herbal species. The liquid supernatant from MCE was validated to be used as direct sample for DART-MS analysis. Quantitation was successfully achieved for polysaccharide contents in Dendrobium officinale from different locations.

CONCLUSIONS

A rapid fingerprint protocol in combination of MCE and DART-MS for herbal polysaccharides was developed. The whole process could be accomplished within a few minutes, from raw materials to final spectra, without requirements of pre-digestion and additional sample purification.

Development of a new atmospheric pressure plasmaspray ionization for ambient mass spectrometry

A new atmospheric pressure ionization method, plasmaspray ionization, termed as PSI, was developed to be an alternative ambient ion source for mass spectrometry. It comprises a plasma jet device and a sample spray part. While the nonthermal plasma jet strikes the surface of stainless steel tube out of the spray capillary, the sprayed sample will be ionized with the assistant of auxiliary gas. Although PSI is a little bit more complex than electrospray ionization (ESI) in instrument, it shows both better linearity and higher sensitivity for organic compounds. For protein samples, it presents wider distributions of multiply charged ions and higher mass resolution without sacrificing any sensitivity. For the mechanism of PSI, the charge build-up process on the tip of capillary should play a key role for the ion formation, and the stimulated pulsed voltage on the flow tube will promote the ion aggregation speed until the charge density is high enough. PSI source contains the features of plasma ionization and ESI and can be considered as a novel combo bridging these techniques. These results reflect that this method of PSI can be applied and further developed as a versatile new ion source for a wild range of organic and biological samples.

Applications of ambient ionization mass spectrometry in 2020: An annual review

Recent developments in mass spectrometry (MS) analyses have seen a concerted effort to reduce the complexity of analytical workflows through the simplification (or removal) of sample preparation and the shortening of run-to-run analysis times. Ambient ionization mass spectrometry (AIMS) is an exemplar MS-based technology that has swiftly developed into a popular and powerful tool in analytical science. This increase in interest and demonstrable applications is down to its capacity to enable the rapid analysis of a diverse range of samples, typically in their native state or following a minimalistic sample preparation approach. The field of AIMS is constantly improving and expanding, with developments of powerful and novel techniques, improvements to existing instrumentation, and exciting new applications added with each year that passes. This annual review provides an overview of applications of AIMS techniques over the past year (2020), with a particular focus on the application of AIMS in a number of key fields of research including biomedical sciences, forensics and security, food sciences, the environment, and chemical synthesis. Novel ambient ionization techniques are introduced, including picolitre pressure-probe electrospray ionization and fiber spray ionization, in addition to modifications and improvements to existing techniques such as hand-held devices for ease of use, and USB-powered ion sources for on-site analysis. In all, the information provided in this review supports the view that AIMS has become a leading approach in MS-based analyses and that improvements to existing methods, alongside the development of novel approaches, will continue across the foreseeable future.