Development and validation of a method for multielement analysis of apatite by total-reflection X-ray fluorescence spectrometry

Exploring the analytical potential of total reflection X-ray fluorescence (TXRF) combined with partial least square (PLS) for simple determination of ash content in various coal types

Ash content, as a crucial indicator of coal quality, its rapid and accurate determination is pivotal to improve the energy utilization of coal and reduce environmental pollution. Traditional spectroscopic methods face significant challenges in acquiring accurate information from coal samples due to the notorious matrix effects arising from their complex composition, vast molecular structure, and diverse coal types. In this study, the feasibility of total reflection X-ray fluorescence (TXRF) combined with partial least squares (PLS) for the determination of coal ash was firstly investigated based on the TXRF being unaffected by matrix effects. Firstly, coal samples were prepared as suspensions, and the effects of sample particle size and different dispersants on the results of TXRF analyses were evaluated. The accuracy and applicability of the chosen sample preparation strategies were further validated using inductively coupled plasma mass spectrometry (ICP-MS) and two certified reference materials (CRMs). Subsequently, based on the analysis of 19 coal samples, the impact of three different predictive variables on the performance of the PLS model was investigated: (a) TXRF full spectrum normalized by the net intensity of the internal standard; (b) net intensity of characteristic peaks for 12 elements (Al, Si, K, Ca, Ti, Fe, Cr, Mn, Cu, Ni, and Sr) normalized by the net intensity of the internal standard; (c) concentrations of the aforementioned 12 elements. The results demonstrate that the PLS model constructed usingthe TXRF full spectrum normalized by the net intensity of the internal standard exhibits the best predictive capabilities, with the determination coefficient of calibration set (R2) and mean square error (MSE) of the prediction set reaching 0.9736 and 0.99 %, respectively. Moreover, the measurement accuracy of this model was six times greater than that obtained with traditional X-ray fluorescence (XRF). Presented analytical results display the possibilities of combining TXRF with PLS for coal quality evaluation.

Total Reflection X-ray Fluorescence Spectrometry: A Comprehensive Review of Critical Components, Analytical Benefits and Practical Applications

Total reflection X-ray fluorescence spectrometry (TXRF) is a pivotal technique in modern atomic spectroscopy, distinguished by its capability for multi-element simultaneous determination, a wide dynamic concentration range, samples do not require acid digestion. Additionally, TXRF exhibits negligible matrix effects when samples are prepared as thin films. Based on these unique features, recent research efforts have increasingly employed laboratory-built TXRF systems for the determination of major and trace elements in various samples. Given the diverse and intricate nature of TXRF systems components, this paper provides an overview of critical components that constitute these systems, compares the influence of various parameters on analytical performance, and offers recommendations for component selection. Additionally, recent applications of laboratory-built TXRF in fields such as environmental monitoring, nuclear energy, and food safety are discussed, with a focus on sample preparation, analyzed elements, and quantitative analysis are presented together with analytical parameters such as detection limits and recoveries. By introducing the instrument components and their practical applications, this paper aims to guide researchers in the construction and optimization of TXRF systems, thereby promoting the advancement of TXRF in future research and practical applications.

Synthesis and Application of a New Polymer with Imprinted Ions for the Preconcentration of Uranium in Natural Water Samples and Determination by Digital Imaging

This work proposes the synthesis of a new polymer with imprinted ions (IIP) for the pre-concentration of uranium in natural waters using digital imaging as a detection technique. The polymer was synthesized using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP) for complex formation, ethylene glycol dimethacrylate (EGDMA) as a crosslinking reagent, methacrylic acid (AMA) as functional monomer, and 2,2'-azobisisobutyronitrile as a radical initiator. The IIP was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy (FTIR). Uranium determination was performed using digital imaging (ID), and some experimental conditions (sample pH, eluent concentration, and sampling flow rate) were optimized using a two-level full factorial design and Doelhert response surface methodology. Thus, using the optimized conditions, the system allowed the determination of uranium with detection and quantification limits of 2.55 and 8.51 µg L^-1, respectively, and a pre-concentration factor of 8.2. All parameters were determined using a 25 mL sample volume. The precision expressed as relative deviation (RSD%) was 3.5% for a solution with a concentration of 50 µg L^-1. Given this, the proposed method was used for the determination of uranium in four samples of natural waters collected in the city of Caetité, Bahia, Brazil. The concentrations obtained ranged from 35 to 75.4 μg L^-1. The accuracy was evaluated by the addition/recovery test, and the values found ranged between 91 and 109%.

X-ray fluorescence spectrometry for environmental analysis: Basic principles, instrumentation, applications and recent trends

In recent years, the conceptual advancement on green analytical chemistry (GAC) has moved in parallel with efforts to incorporate new screening or quantitative low-cost analytical tools to solve analytical problems. In this sense, the role of solid state techniques that allow the non-invasive analysis (or with a minimum sample treatment) of solid samples cannot be neglected. This review describes the basic principles, instrumentation and advances in the application of X-ray fluorescence instrumentation to the environmental sciences research topics, published between 2006 and 2020. Obviously, and because of the enormous number of works that can be found in the literature, it is not possible to exhaustively cover all published articles and the diversity of topics related to the environment in which a solid state technique like XRF has been applied successfully. It is a question of making a compilation of the instrumentation in use, the significant advances in XRF spectrometry and sample treatment strategies to highlight the potential of its implementation for environmental assessment.

Multielement analysis of continental and lacustrine ferromanganese nodules by WDXRF, TXRF, and ICP-MS methods. Intercomparison study and accuracy assessment

Specific elemental and mineral composition of lacustrine and continental nodules differ substantially from silicate sedimentary rock, oceanic nodules, and crusts. The examination of this rock type requires study of the applicability of analytical methods to get accurate data on the elemental composition due to the lack of matrix-matched certified reference materials. In this study, multielement analysis of continental and lacustrine ferromanganese nodules was performed using various analytical methods. Samples were prepared as fused glasses and pressed pellets for wavelength-dispersive X-ray fluorescence, suspensions for total reflection X-ray fluorescence, and solutions after fusion for inductively coupled plasma mass spectrometry measurements. An intercomparison test was carried out to study the results using several analytical methods.