Selective determination of Cr(Ⅵ) and non-chromatographic speciation analysis of inorganic chromium by chemical vapor generation-inductively coupled plasma mass spectrometry

Construction of Stable 2D Cationic Breathing Ni-MOF for Cr(VI) Trapping and Electrochemical Sensing

Pollution of surface water by heavy metal hexavalent chromium ions poses a serious threat to human health; herein, a two-dimensional (2D) cationic breathing Ni-MOF with free nitrate ions between the layers was designed and synthesized according to the characteristics of hexavalent chromium ions, {[Ni(L)2](NO3)2·5H2O}n (L = 1,3,5-tris[4-(imidazol-1-yl)phenyl]benzene). The flexible layer spacing of the 2D breathing Ni-MOF allows the exchange of NO3- by CrO42- without destroying the original structure. Electrostatic and hydrogen bonding interactions between CrO42- and Ni-MOF facilitate its exchange with NO3-. Moreover, CrO42- exhibits a higher binding energy with Ni-MOF compared to NO3-, and the hydrophobic channels of Ni-MOF favor CrO42- trapping due to its lower hydration energy. Consequently, Ni-MOF demonstrates both effective sorption and electrochemical sensing of Cr(VI), achieving a sensitivity of 2.091 μA μM-1 and a detection limit of 0.07 μM.

Ultrasensitive determination of selenium in water and food samples by ICP-MS: UiO-66-NH2 for preconcentration and direct slurry hydride generation

BACKGROUND

Selenium is an indispensable microelement for humans and food is the main source of selenium intake. As one of the best techniques for the determination of selenium, inductive coupling plasma-mass spectrometry (ICP-MS) features some unique advantages, such as wide linear range and high sensitivity. Nevertheless, it still remains a challenge to achieve the accurate and high sensitivity determination of ultra-trace selenium in food samples by ICP-MS owning to the high first ionization energy of selenium and interferences from sample matrices as well as isobaric interferences.

RESULTS

In this work, UiO-66-NH2 (metal organic framework, MOF) was fast synthesized by microwave method and employed for the preconcentration of ultra-trace selenium with an adsorption efficiency of nearly 100%. The selenium-adsorbed MOF was collected by filtration, and then simply converted to slurry for in situ hydride generation (HG) for sensitive detection of selenium by ICP-MS. Various factors affecting the adsorption of selenium by the MOF (including pH, adsorption time, and amount of MOF) together with main parameters of hydride generation (including concentrations of HCl and NaBH4) were carefully evaluated. Experimental results show that effective matrix separation can greatly reduce interference, with an excellent detection limit of 1 ng/L. The practicability and accuracy of this method were successfully confirmed by the determination of trace selenium in several food samples.

SIGNIFICANCE

UiO-66-NH2 (MOF) was used as an effective adsorbent for the preconcentration of selenium prior to direct slurry sampling HG-ICP-MS determination. Direct slurry sampling avoided additional elution procedures and was conducive to eliminating matrix and isobaric interferences. High sensitivity and anti-interference determination were achieved for determination of ultra-trace Se in complex food samples.

Using Multistage Energy Barrier of Heterojunctions in Improving Cr(VI) Detection

Detecting heavy metals in seawater is challenging due to the high salinity and complex composition, which cause strong interference. To address this issue, we propose using a multistage energy barrier as an electrochemical driver to generate electrochemical responses that can resist interference. The Ni-based heterojunction foams with different types of barriers were fabricated to detect Cr(VI), and the effects of the energy barriers on the electrochemical response were studied. The single-stage barrier can effectively drive the electrochemical response, and the multistage barrier is even more powerful in improving sensing performance. A prototype Ni/NiO/CeO2/Au/PANI foam with multistage barriers achieved a high sensitivity and recovery rate (93.63-104.79%) in detecting seawater while resisting interference. The use of multistage barriers as a driver to resist electrochemical interference is a promising approach.

Chemical vapor generation of tungsten for atomic spectrometric determination: Homogeneous sensitizer and mechanism study

BACKGROUND

Inductively coupled plasma-mass spectrometry (ICP-MS) is one of the most powerful instrumental techniques for the determination of tungsten for its low detection limit and wide linear range, while it remains challenging since the analytical performance can be affected by complicated sample matrix. Chemical vapor generation (CVG) harbors the potential to be an alternative to conventional solution nebulization for sample introduction to reduce matrix effect. However, the CVG of tungsten was low in efficiency. It is clear that green and homogeneous enhancement for CVG of tungsten is desired and the mechanism is worth in-depth investigation.

RESULTS

Two green and homogeneous enhancement systems for CVG of tungsten were studied, including photochemical vapor generation (PVG) and hydride generation (HG) with sensitizers, Fe3+ and DDTC, respectively. Under optimal conditions, the limits of detection (LODs) were 0.02 μg L-1 for the PVG and 0.003 μg L-1 for the HG, respectively. For PVG, the Fe3+/Fe2+ cycling, free radical species, gaseous product, and the chemical speciation evolution of W in the PVG process were studied in detail. Photo-Fenton effect, generated reductive radical ·CO2-, gaseous product Fe(CO)5, and the mixed valence of W5+/W6+ in the PVG process were found to be crucial for the enhancement. As for HG, the complexation between W(VI) and DDTC might be conducive to the enhanced HG efficiency.

SIGNIFICANCE

This work not only in-depth expands the element scope of CVG, but also investigates the enhancement mechanisms experimentally, which might render a deep insight into the CVG processes and foreshadow new guidelines for screening green and efficient homogeneous sensitizers for CVGs of more elements in the future.

A novel separation and preconcentration methodology based on direct immersion dual-drop microextraction for speciation of inorganic chromium in environmental water samples

In this study, for the first time, a novel separation and preconcentration method of direct immersion dual-drop microextraction (DIDDME) was proposed for the species of inorganic chromium (Cr(III) and Cr(VI)) followed by graphite furnace atomic absorption spectrometry detection. The methodology is based on that two organic drops hold on the needle tips of microsyringes were concurrently immersed in a stirred sample solution. Each drop contains a chelating reagent, which can react with a specific species under the same pH value. Therefore, Cr(III) and Cr(VI) can be selectively extracted into different drops. This procedure did not require tedious and complicated pre-oxidation/pre-reduction and centrifugation/filtration operations, which may lead to the risk of sample contamination and analysis errors. Main parameters influencing separation, preconcentration and identification of the target species were investigated. An enrichment factor of 400-fold was obtained for Cr(III) and Cr(VI). Under the optimized conditions, detection limits for this method were 1.1 ng L^-1 and 1.4 ng L^-1 for Cr(III) and Cr(VI) with relative standard deviations of 5.1 and 6.3%, respectively. This procedure was applied for the separation, preconcentration and determination of Cr(III) and Cr(VI) in environmental water samples and certified reference materials with satisfactory results. Recoveries of spiked experiments ranged from 86.0 to 112%.

Solid-Phase Pyrolysis Synthesis of Highly Fluorescent Nitrogen/Sulfur Codoped Graphene Quantum Dots for Selective and Sensitive Diversity Detection of Cr(VI)

In this study, a simple one-step solid-phase pyrolysis synthesis procedure was employed to prepare N and S codoped highly fluorescent graphene quantum dots (N/S-GQDs). The as-synthesized quantum dot showed λ_excitation-dependent blue fluorescence (FL) emission with a relative quantum yield of about 22% and displayed good biocompatibility, high water dispersibility, and excellent stability under extreme conditions (i.e., ionic strength, pH, and temperature). The potential applicability of the as-synthesized quantum dot was tested by employing solution- and paper-based FL detection modes for Cr(VI) detection. The proposed solution- and paper-based FL sensors showed lower limit of detection (LOD) values of 0.01 and 0.4 μM, respectively. The as-constructed paper- and solution-based FL sensors proved the feasibility of sensitive, cost-effective, and on-site detection of Cr(VI).

Removal of Chromium(VI) by Nanoscale Zero-Valent Iron Supported on Melamine Carbon Foam

The overuse of chromium (Cr) has significantly negatively impacted human life and environmental sustainability. Recently, the employment of nano zero-valent iron (nZVI) for Cr(VI) removal is becoming an emerging approach. In this study, carbonized melamine foam-supported nZVI composites, prepared by a simple impregnation–carbonization–reduction method, were assessed for efficient Cr(VI) removal. The prepared composites were characterized by XPS, SEM, TEM, BET and XRD. Batch experiments at different conditions revealed that the amount of iron added, the temperature of carbonization and the initial Cr(VI) concentration were critical factors. Fe@MF-12.5-800 exhibited the highest removal efficiency of 99% Cr(VI) (10 mg/L) at neutral pH among the carbonized melamine foam-supported nZVI composites. Its iron particles were effectively soldered onto the carbonaceous surfaces within the pore networks. Moreover, Fe@MF-12.5-800 demonstrated remarkable stability (60%, 7 days) in an open environment compared with nZVI particles.

Highly dispersed and stable nano zero-valent iron doped electrospun carbon nanofiber composite for aqueous hexavalent chromium removal

In this work, a nZVI doped electrospun carbon nanofiber (nZVI-CNF) composite was prepared and applied for aqueous hexavalent chromium (Cr(vi)) removal. Firstly, FeCl₃/PAN nanofibers were prepared by a simple electrospinning method; Then, nZVI-CNFs were obtained by carbonization of FeCl₃/PAN nanofibers at 800 °C. The surface morphology and internal structure of nZVI-CNFs were characterized by SEM and TEM, showing that the uniformly dispersed nZVI particles were well integrated into the carbon layer structure. The Cr(vi) removal efficiency of nZVI-CNFs was 91.5% with a Cr(vi) concentration of 10 mg L⁻¹ and the mechanism was further studied by XRD and XPS. Meanwhile, the nZVI-CNFs exhibited good stability over a wide range of pH values from 4–8 and a long time placement stability. Furthermore, nZVI-CNFs can be used as a filter membrane for continuous treatment of wastewater, suggesting great potential for practical application.

Improving the dispersion and stability of nano zero-valent iron (nZVI) is very important for its practical application.

A Stable 2D Zr(IV)-Based Metal-Organic Framework (USTS-7) for Selective Sensing of Cr2O72- in Aqueous Solution

A novel 2D porous Zr(IV)-based metal-organic framework (USTS-7) was assembled from 2,5-bis[2-(methylthio)ethylthio]terephthalic acid and ZrCl₄. USTS-7 retains its stability in water, strong acid, and base; moreover, it is highly luminescent and displays a remarkable selective sensing property toward Cr₂O₇^2- in aqueous solution with a very low detection limit.