Foldable paper-based analytical device for membraneless gas-separation and determination of iodate based on fluorescence quenching of gold nanoclusters

Accuracy improvement via novel ratiometry design in distance-based microfluidic paper based analytical device: instrument-free point of care testing

Developing accurate, precise, instrument-free, and point-of-need microfluidic paper-based devices is highly significant in clinical diagnosis and biomedical analysis. In the present work, a ratiometric distance-based microfluidic paper-based analytical device (R-DB-μPAD), along with a three-dimensional (3D) multifunctional connector (spacer), was designed to improve the accuracy and detection resolution analyses. Specifically, the novel R-DB-μPAD was used for the accurate and precise detection of ascorbic acid (AA) as a model analyte. In this design, two channels were fabricated as detection zones, with a 3D spacer located between the sampling and detection zones to improve the detection resolution by preventing the reagents mixing from overspreading between these zones. Two probes for AA were used: Fe³⁺ and 1,10-phenanthroline were deposited in the first channel, and oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB) was added to the second channel. Accuracy improvement of this ratiometry-based design was achieved by enhancing the linearity range and reducing the volume dependency of the output signal. Moreover, the 3D connector improved the detection resolution by eliminating the systematic errors. Under the optimal conditions, the ratio of the distances of the color bands in the two channels was used to construct an analytical calibration curve in the range from 0.05 to 1.2 mM, with a limit of detection of 16 μM. The proposed R-DB-μPAD combined with the connector was successfully used for the detection of AA in orange juice and vitamin C tablets with satisfactory accuracy and precision. This work opens the door for multiplex analysis of various analytes in different matrices.

Analyte-triggered cascade signal amplification strategy for highly sensitive detection of iodate in table salt with dual-readout signals

A novel and highly sensitive upconversion fluorescence and colorimetric dual readout iodate (IO₃^-) nanosensor system was constructed by using both the outstanding optical performance of NaYF₄:Yb, Tm upconversion nanoparticles (UCNPs) and the analyte-triggered cascade signal amplification (CSA) technique. The construction of the sensing system consisted of three processes. First, IO₃^- oxidized o-phenylenediamine (OPD) to diaminophenazine (OPDox), while IO₃^- was reduced to I₂. Second, the generated I₂ can further oxidize OPD to OPDox. This mechanism has been verified by ¹H NMR spectra titration analysis and HRMS measurement, which effectively improves the selectivity and sensitivity of the measurement of IO₃^-. Third, the generated OPDox can effectively quench the fluorescence of UCNPs via the inner filter effect (IFE), realize analyte-triggered CSA, and allow quantitative determination of IO₃^-. Under the optimized conditions, the fluorescence quenching efficiency showed a good linear relationship to IO₃^- concentration in the range of 0.06-100 μM, and the detection limit reached 0.026 μM (3RSD/slope). Moreover, this method was applied to detect IO₃^- in table salt samples, yielding satisfactory determination results with excellent recoveries (95.5-105%) and high precision (RSD <5.5%). These results suggest that the dual-readout sensing strategy with well-defined response mechanisms has promising application prospects in physiological and pathological studies.

The recognition of aristolochic acid I based on fluorescence quenching of bovine serum albumin-stabilized gold nanoclusters

Aristolochic acid I (AAI) is one of the nephrotoxic derivatives present in genera Aristolochia and Asarum. Although some detection strategies for monitoring AAI have been reported, the application of these methods is limited because they involve tedious preparation and require professional operation. In this work, bovine serum albumin (BSA) has been introduced as a reducing agent and stabilizing agent to synthesize gold nanoclusters with strong red fluorescence for the rapid and effective detection of AAI. Under excitation at 328 nm, the fluorescence intensity at the maximum emission wavelength of the bovine serum albumin-stabilized gold nanoclusters (BSA-AuNCs) decreased with the addition of AAI, and the degree of quenching showed a linear relationship with the concentration of AAI from 0.1-12.8 μg mL^-1. The obtained BSA-AuNCs were stable, and quenching in the presence of AAI could be achieved within 10 seconds. Here, we have focused on the application of these gold nanoclusters as an optical sensing material for AAI in rat urine samples, including a discussion on the detection mechanism. The detection result of the fluorescent probe was consistent with that of the HPLC method. In view of this reality, the reported protein-AuNCs sensing platform can serve as a convenient detection strategy in toxicological analyses.

Dispersive liquid-liquid microextraction and diffuse reflectance-Fourier transform infrared spectroscopy for iodate determination in food grade salt and food samples

A novel method based on diffused reflectance Fourier-transform infrared spectroscopy (DRS-FTIR) was employed for iodate determination in food grade salt and food products. The method attained sensitivity that was comparable to or better than that in most of the contemporary spectrophotometric methods. This was realized through a combination of azo dye formation and dispersive liquid-liquid microextraction of dye when a 37-fold enrichment was obtained. FT-IR enabled integrating alternative target peak, and freedom in sample solvent composition relative to UV-visible spectrophotometry where the solvent polarity, pH, and presence of ions may affect the spectral properties of the measurable coloured species. Food samples containing iodide or covalently bonded iodine were oxidized with alkaline permanganate for mineralization and iodate formation. Optimization of both reaction conditions was carried out by means of response surface methodology. The method had a linear range 0.04-10 mg kg^-1 iodate and limit of detection of 4.4 µg kg^-1.

Enhancement of the Detection Performance of Paper-Based Analytical Devices by Nanomaterials

Paper-based analytical devices (PADs), including lateral flow assays (LFAs), dipstick assays and microfluidic PADs (μPADs), have a great impact on the healthcare realm and environmental monitoring. This is especially evident in developing countries because PADs-based point-of-care testing (POCT) enables to rapidly determine various (bio)chemical analytes in a miniaturized, cost-effective and user-friendly manner. Low sensitivity and poor specificity are the main bottlenecks associated with PADs, which limit the entry of PADs into the real-life applications. The application of nanomaterials in PADs is showing great improvement in their detection performance in terms of sensitivity, selectivity and accuracy since the nanomaterials have unique physicochemical properties. In this review, the research progress on the nanomaterial-based PADs is summarized by highlighting representative recent publications. We mainly focus on the detection principles, the sensing mechanisms of how they work and applications in disease diagnosis, environmental monitoring and food safety management. In addition, the limitations and challenges associated with the development of nanomaterial-based PADs are discussed, and further directions in this research field are proposed.

Recent Advances and Applications in Paper-Based Devices for Point-of-Care Testing

Point-of-care testing (POCT), as a portable and user-friendly technology, can obtain accurate test results immediately at the sampling point. Nowadays, microfluidic paper-based analysis devices (μPads) have attracted the eye of the public and accelerated the development of POCT. A variety of detection methods are combined with μPads to realize precise, rapid and sensitive POCT. This article mainly introduced the development of electrochemistry and optical detection methods on μPads for POCT and their applications on disease analysis, environmental monitoring and food control in the past 5 years. Finally, the challenges and future development prospects of μPads for POCT were discussed.

Fully Inkjet Printing Preparation of a Carbon Dots Multichannel Microfluidic Paper-Based Sensor and Its Application in Food Additive Detection

Microfluidic paper-based sensors as a new type of microsample detection technology are widely used in medical diagnosis, environmental monitoring, and food safety testing. Inkjet printing has the advantages of simplicity, speed, flexibility, high resolution, low cost, and efficient mass production and has become one of the most cutting-edge technologies in the manufacture of paper-based sensors. In this work, a fully inkjet printing preparation method was proposed for paper-based sensors, which can achieve high-precision, multichannel, and visual fluorescence detection. Three kinds of fluorescent carbon dots (CDs; r-CDs, b-CDs, and y-CDs) were fabricated into inkjet ink by adding a suitable ratio of solvent, PEG, and surfactant FS3100 to control its viscosity, surface tension, and other influencing factors, obtaining the best-visualized fluorescence response on paper. To optimize the full inkjet printing process of the paper-based sensor, we studied the influence of factors such as the hydrophobic material AKD formula, postprocessing conditions, and the structure of the hydrophilic and hydrophobic channels on the paper-based detection accuracy, and it was found that proper AKD concentration, curing time, and temperature can make AKD fully react with paper-based surface groups and produce more hydrophobic groups on the surface and inside of the filter paper, which can form paper-based microfluidic sensors with clear boundaries and fast transmission speed at low cost and high efficiency. The fabricated sensor is used for the fluorometric determination of vitamin C (AA), NO₂^-, and sunset yellow (SY) at the same time, and the limits of visual detection by eyes are 6 mmol/L (NO₂^-), 60 μmol/L (SY), and 40 mmol/L (AA). The mechanism of inkjet printing is investigated in detail, which is simple, reliable, and easy to realize mass production and can realize highly sensitive, on-site, and visual detection for food additives.

Nanomaterial-Integrated Cellulose Platforms for Optical Sensing of Trace Metals and Anionic Species in the Environment

The development of disposable sensors that can be easily adapted to every analytical problem is currently a hot topic that is revolutionizing many areas of science and technology. The need for decentralized analytical measurements at real time is increasing for solving problems in areas such as environment pollution, medical diagnostic, food quality assurance, etc., requiring fast action. Despite some current limitations of these devices, such as insufficient detection capability at (ultra)trace level and risk of interferent effects due to matrix, they allow low-cost analysis, portability, low sample consumption, and fast response. In the last years, development of paper-based analytical devices has undergone a dramatic increase for on-site detection of toxic metal ions and other pollutants. Along with the great availability of cellulose substrates, the immobilization of receptors providing enhanced recognition ability, such as a variety of nanomaterials, has driven the design of novel sensing approaches. This review is aimed at describing and discussing the different possibilities arisen with the use of different nanoreceptors (e.g., plasmonic nanoparticles, quantum dots, carbon-based fluorescent nanoparticles, etc.) immobilized onto cellulose-based substrates for trace element detection, their advantages and shortcomings.