Determination of multi-class polyaromatic compounds in sediments by a simple modified matrix solid phase dispersive extraction

Hexafluorobutanol primary alcohol ethoxylate-based supramolecular solvent formation and their application in direct microextraction of malachite green and crystal violet from lake sediments

A new type of hexafluorobutanol (HFB) primary alcohol ethoxylate (AEO)-based supramolecular solvent (SUPRAS) with density higher than water was prepared for the first time. HFB acted as AEO micelle-forming agent and density-regulating agent for SUPRAS formation. The prepared SUPARS was applied as extraction solvent for vortex-assisted direct microextraction of malachite green (MG) and crystal violet (CV) from lake sediment followed by high-performance liquid chromatographic determination. In the present work, SUPRASs prepared from AEO with different carbon chains as the amphiphiles and various coacervation agents were investigated. SUPARS formed from MOA-3 and HFB provided better extraction efficiency in comparison with other SUPRASs. Parameters influencing the extraction recovery of target analytes including the type and volume of AEO, volume of HFB, and vortex time were investigated and optimized. Under optimized conditions, linearity in the range of 2.0-400 μg g-1 for MG and 2.0-500 μg g-1 for CV with a correlation coefficient higher than 0.9947 was obtained. Limits of detection of 0.5 μg g-1 and relative standard deviations in the range of 0.9-5.8% were obtained. Compared to conventional extraction techniques for analysis of analytes in solid samples, the proposed method reduced sample usage and eliminated a primary extraction process by using a toxic organic solvent. The proposed method is simple, fast, and green and can be used for the analysis of target analytes in solid samples.

A multi-site recognition molecularly imprinted solid-phase microextraction fiber for selective enrichment of three cross-class environmental endocrine disruptors

Molecularly imprinted solid-phase microextraction fibers with multi-site recognition were prepared for the simultaneous enrichment of three cross-class environmental endocrine disruptors (EEDs) in environmental water. The surface morphology of the multi-site recognition molecularly imprinted fibers was characterized using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, and surface area and pore size analyzer. Under optimal extraction conditions, the molecularly imprinted fibers showed higher extraction capacity to bisphenol F, diethyl phthalate, and methyl paraben than non-imprinted polymer fibers and commercial fibers. Compared with commercial solid-phase microextraction fibers, the multi-site recognition molecularly imprinted fibers showed superior extraction performance at different concentrations of analytes. The selectivity study confirmed that the multi-site recognition molecularly imprinted solid-phase microextraction fibers were highly selective not only for specific template molecules but also for bisphenols, parabens, and phthalates. Furthermore, the method achieved a limit of detection of 0.003-0.02 μg L^-1 for the three cross-class EEDs in environmental water samples with recoveries ranging from 75.76% to 112.69% and relative standard deviations below 11.46%. Thus, the novel MIP fibers with multi-site recognition prepared in this work have provided a promising approach in the field of specific adsorption and a strategy for the simultaneous and sensitive monitoring of multiple cross-class trace EEDs.

Direct thermal desorption-gas chromatography-tandem mass spectrometry versus microwave assisted extraction and GC-MS for the simultaneous analysis of polyaromatic hydrocarbons (PAHs, PCBs) from sediments

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) are regulated contaminants usually investigated in sediments. Conventional approaches often use GC-MS to analyse them with a preliminary extraction step which can be solvent- and time-consuming. Here two extraction methodologies were optimized using experimental designs, and compared: microwave assisted extraction (MAE) and thermal desorption (TD); the latter was rarely used for sediments analyses. Several factors that may influence extraction recoveries were studied including matrix parameters (mass, organic matter (OM) content) and processing parameters. A definitive screening design DSD was performed to screen the 6 most influencing factors and model the extraction recoveries using TD. Whatever the OM content, a minimum sediment mass (5 mg) was better for an optimal extraction, with a minimum temperature rate (15 °C min^-1), a maximum final temperature (350 °C) associated with a minimum hold time (5 min), and a maximum vent flow (150 mL min^-1) between the TD unit and the cryogenic trap. Thereafter matrix effects were evaluated using standard addition, and quality assurance and control were implemented for comparing MAE and TD. TD-GC-MS/MS sensitivity was higher than MAE-GC-MS with detection limits in the range 5-1160 pg and 20-125 pg for PAHs and PCBs, respectively. When considering the appropriate strategy for quantification, TD was also reliable for sediments analysis. Although MAE was less sensitive to matrix effects, TD could significantly improve the analytical process, due to direct coupling with GC-MS/MS and complete automation. Moreover, TD offered possible higher spatial resolution than MAE, particularly for sediment cores analysis, due to the 1000-times lower sample size. At last, TD-GC-MS/MS appeared as a greener analytical procedure.

Hydrophilic-interaction-based magnetically assisted matrix solid-phase dispersion extraction of carbadox and olaquindox in feeds

BACKGROUND

Carbadox and olaquindox have been banned from feeds since 1998 by the EU because of their mutagenic, photoallergic, and carcinogenic effects. Unfortunately, owing to their outstanding effect, they are frequently abused or misused in animal husbandry. There is an urgent need to develop a sensitive and reliable method for monitoring these drugs in animal feeds.

RESULTS

This work reported a new method of hydrophilic-interaction-based magnetically assisted matrix solid-phase dispersion (MMSPD) extraction coupled with reversed-phase liquid chromatography-mass spectrometry for simultaneous determination of carbadox and olaquindox in animal feeds. 3-Trimethoxysilylpropyl methacrylate (γ-MAPS)-modified attapulgite (ATP) was crosslinked with γ-MAPS-modified iron(II,III) oxide (Fe₃ O₄ ), 1-vinyl-3-(butyl-4-sulfonate) imidazolium (VBSIm), acrylamide (AM), and N,N'-methylene-bis(acrylamide) (MBA) to synthesize ATP@Fe₃ O₄ @poly(VBSIm-AM-MBA) particles. The resultant particles were characterized by scanning electron microscopy, energy dispersive spectrometer, transmission electron microscopy, vibrating sample magnetometer, and Fourier transform infrared spectroscopy. Crosslinking of ATP into the magnetic particles has significantly increased the adsorption capacity of the particles. Under optimum conditions, the limits of detection (S/N = 3) were 0.3 μg kg^-1 and 0.9 μg kg^-1 for carbadox and olaquindox respectively. The intra-day and inter-day recoveries of the spiked targets in feed samples were in the range 83.5-98.3% with relative standard deviations of 1.0-8.3%.

CONCLUSION

With a simplified procedure and a low amount of sample, the proposed hydrophilic-interaction-based MMSPD method is not only useful for the determination of carbadox and olaquindox in feeds but also holds great promise for the analysis of other polar targets in solid or semisolid matrices. © 2021 Society of Chemical Industry.

Advances in pretreatment and analysis methods of aromatic hydrocarbons in soil

Benzene compounds that are prevalent in the soil as organic pollutants mainly include BTEX (benzene, toluene, ethylbenzene, and three xylene isomers) and PAHs (polycyclic aromatic hydrocarbons). These pose a severe threat to many aspects of human health. Therefore, the accurate measurement of BTEX and PAHs concentrations in the soil is of great importance. The samples for analysis of BTEX and PAHs need to be suitable for the various detection methods after pretreatment, which include Soxhlet extraction, ultrasonic extraction, solid-phase microextraction, supercritical extraction, and needle trap. The detection techniques mainly consist of gas chromatography (GC), mass spectrometry (MS), and online sensors, and provide comprehensive information on contaminants in the soil. Their performance is evaluated in terms of sensitivity, selectivity, and recovery. Recently, there has been rapid progress in the pretreatment and analysis methods for the quantitative and qualitative analyses of BTEX and PAHs. Therefore, it is necessary to produce a timely and in-depth review of the emerging pretreatment and analysis methods, which is unfortunately absent from the recent literature. In this work, state-of-art extraction techniques and analytical methods have been summarized for the determination of BTEX and PAHs in soil, with a particular focus on the potential and limitations of the respective methods for different aromatic hydrocarbons. Accordingly, the paper will describe the basic methodological knowledge, as well as the recent advancement of pretreatment and analysis methods for samples containing BTEX and PAHs.

Boron nitride nanosheet-assisted matrix solid-phase dispersion microextraction of alkaloids from lotus plumule by high-performance liquid chromatography coupled with ultraviolet detection and ion mobility quadrupole time-of-flight mass spectrometry

A boron nitride nanosheet (BNNS)-assisted matrix solid-phase dispersion method was established to microextract alkaloids from medicinal plants. The target compounds were identified by high-performance liquid chromatography coupled with ultraviolet detection and ion mobility quadrupole time-of-flight mass spectrometry. During the experimental process, several important parameters, including the type of dispersant, the amount of dispersant, the grinding time, and the type of elution solvent, were optimized. Finally, the BNNSs were chosen as the best dispersant, and their microcosmic morphologies were identified by scanning electron microscopy and transmission electron microscopy. Because of the special property of BNNSs, the cost of this experiment was greatly reduced, especially in elution volume, sample amount (50 mg), and extraction time (2 min). Under the best conditions, 50 mg of sample powder was dispersed with 50 mg of BNNSs, the grinding time was 120 s, the mixed powder was eluted with 200 μL of methanol, and good linearity (r²  > 0.9993) and satisfactory recoveries (80-100%) were obtained. The inter- and intraday precisions were acceptable, with RSDs lower than 2.01 and 4.84%, respectively. The limits of detection ranged from 2.54 to 15.00 ng/mL, and the limits of quantitation were 8.47 to 50.00 ng/mL. The proposed method was successfully applied for the determination of liensinine, isoliensinine, and neferine in lotus plumule.