Schiff base network-1 incorporated monolithic column for in-tube solid phase microextraction of antiepileptic drugs in human plasma

Preparation of a β-cyclodextrin grafted magnetic biochar for efficient extraction of four antiepileptic drugs in plasma samples

Simultaneous monitoring of plasma concentration levels of multiple antiepileptic drugs (AEDs) is essential for dose adjustment in comprehensive epilepsy treatment, necessitating a sensitive technique for accurate extraction and determination of AEDs. Herein, a magnetic solid-phase extraction (MSPE) technique on the basis of modified biochar (BC) is investigated to extract four AEDs from plasma, in conjunction with high performance liquid chromatography. BC derived from Zizyphus jujuba seed shells was activated by phosphoric acid (PBC) and magnetized via coprecipitation to produce MPBC. The MPBCCD obtained after modification with β-cyclodextrin (CD) was characterized and evaluated for adsorption. It exhibited fast adsorption kinetics based on second-order kinetics and satisfactory adsorption capacity for AEDs. Then it was employed as the MSPE adsorbent and the influencing parameters were optimized. The enrichment factor was 18.75. The validation analysis revealed a favorable linearity that ranged from 0.04 to 20 μg·mL-1 along with a low limit of detection of 6.85 to 10.19 ng·mL-1. The recovery of the AEDs ranged from 78.7 to 109.2 %, with relative standard deviations below 6.7 %. Using quantum chemistry theory calculations and experimental results analysis, the adsorption mechanism was investigated. It disclosed that the suggested strategy built upon MPBCCD was appropriate for the assessment of AEDs in plasma and expanded the usage of BC as the environmentally favorable matrix for the analysis of biological samples.

Recent advance on microextraction sampling technologies for bioanalysis

The contents of target substances in biological samples are usually at low concentration levels, and the matrix of biological samples is usually complex. Sample preparation is considered a very critical step in bioanalysis. At present, the utilization of microextraction sampling technology has gained considerable prevalence in the realm of biological analysis. The key developments in this field focus on the efficient microextraction media and the miniaturization and automation of adaptable sample preparation methods currently. In this review, the recent progress on the microextraction sampling technologies for bioanalysis has been introduced from point of view of the preparation of microextraction media and the microextraction sampling strategies. The advance on the microextraction media was reviewed in detail, mainly including the aptamer-functionalized materials, molecularly imprinted polymers, carbon-based materials, metal-organic frameworks, covalent organic frameworks, etc. The advance on the microextraction sampling technologies was summarized mainly based on in-vivo sampling, in-vitro sampling and microdialysis technologies. Moreover, the current challenges and perspective on the future trends of microextraction sampling technologies for bioanalysis were briefly discussed.

Recent advances in the use of SPME for drug analysis in clinical, toxicological, and forensic medicine studies

Solid-phase microextraction (SPME) has gained attention as a simple, fast, and non-exhaustive extraction technique, as its unique features enable its use for the extraction of many classes of drugs from biological matrices. This sample-preparation approach consolidates sampling and sample preparation into a single step, in addition to providing analyte preconcentration and sample clean-up. These features have helped SPME become an integral part of several analytical protocols for monitoring drug concentrations in human matrices in clinical, toxicological, and forensic medicine studies. Over the years, researchers have continued to develop the SPME technique, resulting in the introduction of novel sorbents and geometries, which have resulted in improved extraction efficiencies. This review summarizes developments and applications of SPME published between 2016 and 2022, specifically in relation to the analysis of central nervous system drugs, drugs used to treat cardiovascular disorders and bacterial infections, and drugs used in immunosuppressive and anticancer therapies.

Separation and purification of glycosides from medicinal plants based on strong polar separation medium with online closed-loop mode

Natural glycosides widely distributed in medicinal plants are valuable sources of therapeutic agents, showing various pharmacological effects. The separation and purification of natural glycosides are meaningful for their pharmacological research, which face with great challenges due to the complex of medicinal plants samples. In this work, two kinds of functional monolithic separation mediums A and S were fabricated and fully applied in the online extraction, separation and purification of active glycoside components from medicinal plants with a simple-procedure closed-loop mode. Chrysophanol glucoside and physcion glucoside were detected and separated from Rhei Radix et Rhizoma using separation medium A as a solid-phase extraction adsorbent. Rhapontin was isolated and purified from Rheum hotaoense C. Y. Cheng et Kao using separation medium S as the stationary phase of high-performance liquid chromatography. Compared to the reported literatures, high yield of 5.68, 1.20 and 4.76 mg g-1 of these three products were obtained with high purity. These two online closed-loop mode methods were carried out using high-performance liquid chromatography system, in which the sample injection, isolation and purification procedures are all online mode, and reduced loss compared to offline extraction and purification procedures, thus achieving high recovery and high purity.

Methacrylate bonded covalent organic framework monolithic column online coupling with high-performance liquid chromatography for analysis of trace estrogens in food

Covalent organic frameworks (COFs) are a burgeoning class of crystalline porous materials with unique properties and have been considered as a promising functional extraction medium in sample pretreatment. In this study, a new methacrylate-bonded COF (TpTh-MA) was well designed and synthesized via the aldehyde-amine condensation reaction, and the TpTh-MA was incorporated into poly (ethylene dimethacrylate) porous monolith by a facile polymerization reaction inside capillary to prepare a novel TpTh-MA monolithic column. The fabricated TpTh-MA monolithic column was characterized with scanning electron microscope, Fourier transform infrared spectrometer, X-ray diffraction, and N₂ adsorption-desorption experiments. Then, the homogeneous porous structure, good permeability and high mechanical stability of TpTh-MA monolithic column was used as separation and enrichment media of capillary microextraction, which was coupled with high-performance liquid chromatography fluorescence detection for online enrichment and analysis of trace estrogens. The main experimental parameters influencing the extraction efficiency were systematically investigated. The adsorption mechanism for three estrogens was also explored and discussed based on hydrophobic effect, π-π affinity and hydrogen bonding interaction, which contributed to its strong recognition affinity to target compounds. The enrichment factors of the TpTh-MA monolithic column micro extraction method for the three estrogens were 107-114, indicating a significant preconcentration ability. Under optimal conditions, a new online analysis method was developed and exhibited good sensitivity and wide linearity range of 0.25-100.0 µg·L^-1 with a coefficient of determination (R²) higher than 0.9990 and a low limit of detection with 0.05-0.07 µg·L^-1. The method was successfully applied for online analysis of three estrogens of milk and shrimp samples and the recoveries obtained from spiking experiments were in range of 81.4-113% and 77.9-111%, with the relative standard deviations of 2.6-7.9% and 2.1-8.3% (n = 5), respectively. The results revealed the great potential for the application of the COFs-bonded monolithic column in the field of sample pretreatment.

Functionalized monolithic columns: Recent advancements and their applications for high-efficiency separation and enrichment in food and medicine

The chromatographic column is the core of a high-performance liquid chromatography (HPLC) system, and must have excellent separation efficiency and selectivity. Therefore, functional modification materials for monolithic columns have been rapidly developed. This study is a systematic review of the recently reported functionalized monolithic columns. In particular, the study reviews the types of functional monomers under different modification conditions, as well as the separation and detection techniques combined with chromatography, and their development prospects. In addition, the applications of functionalized monolithic columns in food analysis, biomedicine, and the analysis of active ingredient of Chinese herbal medicines in recent years are also discussed. Also reviewed are the functionalized monolithic columns for qualitative and quantitative analysis. It provided a reference for further development and application of organic polymer monolithic columns.

Magnetic porous cellulose surface-imprinted polymers synthetized with assistance of deep eutectic solvent for specific recognition and purification of bisphenols

Magnetic porous cellulose molecularly imprinted polymers-based bisphenols have been developed using Fe₃O₄ as the magnetic material, a deep eutectic solvent as the assisted solvent, and N-isopropylacrylamide as the functional monomer. The resulting magnetic porous cellulose molecularly imprinted polymers were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometry, thermal gravimetric analysis, and Brunauer-Emmett-Teller analysis. Moreover, the adsorption properties of the magnetic porous cellulose molecularly imprinted polymers toward bisphenol A, bisphenol F, and bisphenol AF were investigated using static, dynamic, and selective adsorption experiments. The introduction of porous cellulose materials significantly improves the capabilities of the material. The adsorption capacity, mass transfer efficiency, and selectivity of the magnetic porous cellulose molecularly imprinted polymers toward bisphenol A were 5.9, 4.0, and 4.4 times those of traditional molecularly imprinted polymers. Moreover, the adsorption stability of the magnetic porous cellulose molecularly imprinted polymers was investigated under different temperature and pH conditions. The adsorption characteristics of the magnetic porous cellulose molecularly imprinted polymers toward the target molecules were investigated using adsorption isotherm, kinetic, and thermodynamic models. Hydrogen bonding is the main interaction formed between the magnetic porous cellulose molecularly imprinted polymers and the target molecules. Magnetic porous cellulose molecularly imprinted polymers have great application value with excellent stability and reusability. Finally, the combination of the magnetic porous cellulose molecularly imprinted polymers and high-performance liquid chromatography or ultra-performance liquid chromatography-mass spectrometry was successfully used for the purification and detection of bisphenols in milk (1.349 ng/mL bisphenol F and 3.014 ng/mL bisphenol AF), canned fruits (1129 ng/mL bisphenol A, 10.11 ng/mL bisphenol F, and 91.87 ng/mL bisphenol AF), and fish (11.91 ng/mL bisphenol AF) samples. Furthermore, the magnetic porous cellulose molecularly imprinted polymer method is more selective, sensitive, and accurate than the traditional precipitation method.

Combination of pipette tip solid phase extraction and high performance liquid chromatography for determination of plant growth regulators in food samples based on the electrospun covalent organic framework/polyacrylonitrile nanofiber as highly efficient sorbent

Facile and sensitive determination of plant growth regulators (PGRs) in food samples is important but still remains great challenge. Herein, a pipette tip solid phase extraction (PT-SPE) method was developed for fast and sensitively detecting PGRs. The PT-SPE adsorbent was prepared by integrating a novel covalent organic framework (COF) of schiff base network 3 (SNW-3) and polyacrylonitrile (PAN) through electrospinning. The SNW-3 can easily adsorb PGRs with high special affinity through electrovalent bands between the ammonium ions of SNW-3 and the carboxy groups of PGRs. The polymer of PAN acts as scaffold material for SNW-3, which can lower seepage pressure hence accelerates adsorption/desorption kinetics. By combination with HPLC-DAD, a satisfactory method was successfully developed for simultaneous determination of ten PGRs in watermelon. Good analytical performances were achieved with this proposed method, including good linearity (5-500 ng/mL) with high correlation coefficients (R ≥ 0.9981), low limits of detection (S/N = 3, 0.24-3.19 ng/mL) and limits of quantification (S/N = 10, 1.65-5.72 ng/mL), satisfactory precision (intra-day RSDs ≤ 2.7%, inter-day RSDs ≤ 3.7%), and high accuracy (recovery: 82.8-113.0%). The method developed in this study shows high potential for design of high target-affinity adsorbents for food sample preparing.

pH-induced homogeneous liquid-liquid microextraction method based on new switchable deep eutectic solvent for the extraction of three antiepileptic drugs from breast milk

Aim: A pH-induced homogeneous liquid-liquid microextraction (HLLME) using a new switchable deep eutectic solvent has been used for the extraction of three antiepileptic drugs from breast milk samples. Methodology: This method is based on phase separation by changing pH. An ammonia solution and a phosphocholine chloride: hexanoic acid: p-aminophenol deep eutectic solvents were used as the phase separation agent and extraction solvent, respectively. Results: Significant factors were studied and the detection limits and enrichment factors were in the ranges of 0.009-0.19 ng ml^-1 and 182-212 for the analytes, respectively. Also, linear ranges were wide (0.63-500 ng ml^-1) and the method precision was acceptable. Conclusion: The introduced method was successfully applied for the determination of the analyte concentrations in breast milk samples.