Detection of cancer cells in whole blood using a dynamic deformable microfilter and a nucleic acid aptamer

Efficient detection of single circulating tumor cell in blood using Raman mapping based on Aptamer-SERS bio-probe coupled with micropore membrane filtration

Rapid and accurate detection of rare circulating tumor cells (CTCs) in human blood still remains a challenge. We present a surface enhanced Raman spectroscopy (SERS) method based on aptamer-SERS bio-probe recognition coupled with micropore membrane filtration capture for the detection of CTCs at single cell level. The parylene micropore membrane with optimized micropore size installed on a filtration holder could capture bio-probe labeled CTCs by gravity in less than 10 s, and only with very less white blood cells (WBCs) residual. In order to facilitate the synthesis of the aptamer-SERS bio-probe, ethyl acetate dehydration method was established. The bio-probe can be rapidly synthesized within 2 h by binding SH-aptamer to 4- mercaptobenzoic acid (4-MBA) modified AuNPs with the help of ethyl acetate. The SERS bio-probe with selected specific aptamer could distinguish single human non-small cell lung cancer A549 cells from residual WBCs on membrane efficiently and reliably based on their Raman signal intensity difference at 1075 cm-1. Through the filter membrane coupled with aptamer-SERS bio-probe system, even 20 A549 cells in blood solution simulating CTCs sample can be detected, which the recovery rate and recognition rate are more than 90%. This method is rapid, reliable and cost-effective, which indicates a good prospect in clinical application for CTCs detection.

Trapping metastatic cancer cells with mechanical ratchet arrays

Current treatments for cancer, such as chemotherapy, radiotherapy, immunotherapy, and surgery, have positive results but are generally ineffective against metastatic tumors. Treatment effectiveness can be improved by employing bioengineered cancer traps, typically utilizing chemoattractant-loaded materials, to attract infiltrating cancer cells preventing their uncontrolled spread and potentially enabling eradication. However, the encapsulated chemical compounds can have adverse effects on other cells causing unwanted responses, and the generated gradients can evolve unpredictably. Here, we report the development of a cancer trap based on mechanical ratchet structures to capture metastatic cells. The traps use an array of asymmetric local features to mechanically attract cancer cells and direct their migration for prolonged periods. The trapping efficiency was found to be greater than isotropic or inverse anisotropic ratchet structures on either disseminating cancer cells and tumor spheroids. Importantly, the traps exhibited a reduced effectiveness when targeting non-metastatic and non-tumorigenic cells, underscoring their particular suitability for capturing highly invasive cancer cells. Overall, this original approach may have therapeutic implications for fighting cancer, and may also be used to control cell motility for other biological processes. STATEMENT OF SIGNIFICANCE: Current cancer treatments have limitations in treating metastatic tumors, where cancer cells can invade distant organs. Biomaterials loaded with chemoattractants can be implanted to attract and capture metastatic cells preventing uncontrolled spread. However, encapsulated chemical compounds can have adverse effects on other cells, and gradients can evolve unpredictably. This paper presents an original concept of "cancer traps" based on using mechanical ratchet-based structures to capture metastatic cancer cells, with greater trapping efficiency and stability than previously studied methods. This innovative approach has significant potential clinical implications for fighting cancer, particularly in treating metastatic tumors. Additionally, it could be applied to control cell motility for other biological processes, opening new possibilities for biomedicine and tissue engineering.

Highly sensitive and specific resonance Rayleigh scattering detection of esophageal cancer cells via dual-aptamer target binding strategy

The modification of EGFR aptamer (Apt 1) and HER2 aptamer (Apt 2) with gold nanoparticles (AuNPs) is reported to obtain probe I (Apt 1-AuNPs) and probe II (Apt 2-AuNPs). Taking Eca109, KYSE510, and KYSE150 cells as models, the sandwich scattering system of probe I-cell-probe II was formed by the recognition of tumor markers by the aptamer modified probe, and the resonance Rayleigh scattering (RRS) spectra were investigated. The results showed that the scattering system can be used to quantitatively detect the Eca109 cell lines in the range 5.0×10 to 5.0×10⁵ cells·mL^-1 with a detection limit of 15 cells· mL^-1.The system can also detect the KYSE510 cell lines in a linear range of 5.0×10 to 5.0×10⁵ cells·mL^-1 with a detection limit of 18 cells·mL^-1 and the KYSE150 cell lines in a linear range of 3.0×10 to 5.0×10⁵ cells·mL^-1 with a detection limit of 12 cells·mL^-1. To demonstrate the potential application of the RRS method for real sample analysis, cells were spiked into blank serum samples at concentrations from 1.0×10² to 1.0×10⁵ cells·mL^-1. The recovery was between 97.0% and 102.3%, and the RSD was between 1.1% and 4.9%, confirming the feasibility of the proposed method for ESCC cell determination.

Microfluidic-Assisted CTC Isolation and In Situ Monitoring Using Smart Magnetic Microgels

Capturing rare disease-associated biomarkers from body fluids can offer an early-stage diagnosis of different cancers. Circulating tumor cells (CTCs) are one of the major cancer biomarkers that provide insightful information about the cancer metastasis prognosis and disease progression. The most common clinical solutions for quantifying CTCs rely on the immunomagnetic separation of cells in whole blood. Microfluidic systems that perform magnetic particle separation have reported promising outcomes in this context, however, most of them suffer from limited efficiency due to the low magnetic force generated which is insufficient to trap cells in a defined position within microchannels. In this work, a novel method for making soft micromagnet patterns with optimized geometry and magnetic material is introduced. This technology is integrated into a bilayer microfluidic chip to localize an external magnetic field, consequently enhancing the capture efficiency (CE) of cancer cells labeled with the magnetic nano/hybrid microgels that are developed in the previous work. A combined numerical-experimental strategy is implemented to design the microfluidic device and optimize the capturing efficiency and to maximize the throughput. The proposed design enables high CE and purity of target cells and real-time time on-chip monitoring of their behavior. The strategy introduced in this paper offers a simple and low-cost yet robust opportunity for early-stage diagnosis and monitoring of cancer-associated biomarkers.

Toward Personalized Nanomedicine: The Critical Evaluation of Micro and Nanodevices for Cancer Biomarker Analysis in Liquid Biopsy

Liquid biopsy for the analysis of circulating cancer biomarkers (CBs) is a major advancement toward the early detection of cancer. In comparison to tissue biopsy techniques, liquid biopsy is relatively painless, offering multiple sampling opportunities across easily accessible bodily fluids such as blood, urine, and saliva. Liquid biopsy is also relatively inexpensive and simple, avoiding the requirement for specialized laboratory equipment or trained medical staff. Major advances in the field of liquid biopsy are attributed largely to developments in nanotechnology and microfabrication that enables the creation of highly precise chip-based platforms. These devices can overcome detection limitations of an individual biomarker by detecting multiple markers simultaneously on the same chip, or by featuring integrated and combined target separation techniques. In this review, the major advances in the field of portable and semi-portable micro, nano, and multiplexed platforms for CB detection for the early diagnosis of cancer are highlighted. A comparative discussion is also provided, noting merits and drawbacks of the platforms, especially in terms of portability. Finally, key challenges toward device portability and possible solutions, as well as discussing the future direction of the field are highlighted.

A New Method for Abrin Detection Based on the Interaction between Target Molecules and Fluorescently Labeled Aptamers on Magnetic Microspheres

A quantitative structure-activity relationship (QSAR) model for the structure and affinity of abrin aptamers was established. A higher affinity abrin aptamer based on the established QSAR model was screened by site-directed mutagenesis. The fluorescence quenching effect between magnetic microspheres and fluorescent molecules was studied for the first time. A new method for abrin detection based on the interaction between target molecules and fluorescently labeled aptamers on magnetic microspheres was developed, with the detection limit of 5 ng mL^-1. This method can overcome the influence of complex environmental interferents in abrin detection and can meet the analysis requirements for simulated samples such as water, soil, and food.