Determination of Fe(Ⅲ) ion and cellular bioimaging based on a novel photoluminescent silicon nanoparticles

Investigation of silicon doped carbon dots/Carboxymethyl cellulose gel platform with tunable afterglow and dynamic multistage anticounterfeiting

The remarkable optical properties of carbon dots, particularly their tunable room-temperature phosphorescence, have garnered significant interest. However, challenges such as aggregation propensity and complex phosphorescence control via energy level manipulation during synthesis persist. Addressing these issues, we present a facile gel platform for tunable afterglow materials. This involves chemically cross-linking biomass-derived silicon-doped carbon dots with carboxymethylcellulose and incorporating non-precious metal salts (BaCl2, CaCl2, MgCl2, ZnCl2, ZnBr2, ZnSO4) to enhance phosphorescence. Metal salts boost intersystem crossing via spin-orbit coupling, elevating triplet state transitions and activating phosphorescence. Chemical bonding and salt-induced coordination/electrostatic interactions establish confinement effects, suppressing non-radiative transitions. Diverse salt-gel interactions yield gels with tunable phosphorescence lifetimes (9.48 ms to 32.13-492.39 ms), corresponding to afterglow durations ranging from 3.20 to 11.86 s. With its broad tunability and high recognition, this gel material exhibits promising potential for dynamic multilevel anti-counterfeiting applications.

Luminescent Silicon Nanocrystals as Metal Ion Sensors

At relatively low concentrations in aqueous solution, Fe3+, Fe2+, Cu2+, and Ni2+ quench the photoluminescence (PL) of the undecenoic acid-capped silicon (Si) nanocrystals. The PL could be restored by adding a chelating agent, such as ethylenediaminetetraacetic acid (EDTA), to remove the ions. Fe3+ and Cu2+ also significantly increase the PL lifetime. Other metal ions, including Cd2+, Mn2+, Pb2+, Zn2+, In3+, K+, and Ca2+, had no effect on the Si nanocrystal PL. The limits of detection (LODs) for Fe3+ and Cu2+ of 370 and 150 nM, respectively, are low enough for metal ion sensing applications.

Silicon-Doped Carbon Dots Crosslinked Carboxymethyl Cellulose Gel: Detection and Adsorption of Fe3

The excessive emission of iron will pollute the environment and harm human health, so the fluorescence detection and adsorption of Fe3+ are of great significance. In the field of water treatment, cellulose-based gels have attracted wide attention due to their excellent properties and environmental friendliness. If carbon dots are used as a crosslinking agent to form a gel with cellulose, it can not only improve mechanical properties but also show good biocompatibility, reactivity, and fluorescence properties. In this study, silicon-doped carbon dots/carboxymethyl cellulose gel (DCG) was successfully prepared by chemically crosslinking biomass-derived silicon-doped carbon dots with carboxymethyl cellulose. The abundant crosslinking points endow the gel with excellent mechanical properties, with a compressive strength reaching 294 kPa. In the experiment on adsorbing Fe3+, the theoretical adsorption capacity reached 125.30 mg/g. The introduction of silicon-doped carbon dots confers the gel with excellent fluorescence properties and a good selective response to Fe3+. It exhibits a good linear relationship within the concentration range of 0-100 mg/L, with a detection limit of 0.6595 mg/L. DCG appears to be a good application prospect in the adsorption and detection of Fe3+.

Facile synthesis of yellow-green fluorescent silicon nanoparticles and their application in detection of nitrophenol isomers

A clear formation mechanism is essential for the controllable synthesis of nanomaterials with different optical properties, which is also one of the challenges facing the preparation of fluorescent silicon nanomaterials. In this work, a one-step room temperature synthesis method was established to prepare yellow-green fluorescent silicon nanoparticles (SiNPs). The obtained SiNPs exhibited excellent pH stability, salt tolerance, anti-photobleaching ability and biocompatibility. Based on X-ray photoelectron spectroscopy, transmission electron microscopy, ultra high performance liquid chromatography tandem mass spectrometry and other characterization data, the formation mechanism of the SiNPs was proposed, which provided a theoretical basis and important reference for the controllable preparation of SiNPs and other fluorescent nanomaterials. In addition, the obtained SiNPs illustrated excellent sensitivity for nitrophenol isomers, the linear range of o-nitrophenol, m-nitrophenol, p-nitrophenol was 0.05-600 μM, 20-600 μM and 0.01-600 μM under the λ_ex and λ_em were set as 440 nm and 549 nm, and related limit detection was 16.7 nM, 6.7 μM and 3.3 nM, respectively. The developed SiNP-based sensor achieved satisfactory recoveries in detecting nitrophenol isomers in a river water sample, showing great promise in practical applications.

Advances in the use of nanomaterials for nucleic acid detection in point-of-care testing devices: A review

The outbreak of the coronavirus (COVID-19) has heightened awareness of the importance of quick and easy testing. The convenience, speed, and timely results from point-of-care testing (POCT) in all vitro diagnostic devices has drawn the strong interest of researchers. However, there are still many challenges in the development of POCT devices, such as the pretreatment of samples, detection sensitivity, specificity, and so on. It is anticipated that the unique properties of nanomaterials, e.g., their magnetic, optical, thermal, and electrically conductive features, will address the deficiencies that currently exist in POCT devices. In this review, we mainly analyze the work processes of POCT devices, especially in nucleic acid detection, and summarize how novel nanomaterials used in various aspects of POCT products can improve performance, with the ultimate aims of offering new ideas for the application of nanomaterials and the overall development of POCT devices.

Two-photon-excited tumor cell fluorescence targeted imaging based on transferrin-functionalized silicon nanoparticles

Transferrin-functionalized silicon nanoparticles (Trf-SiNPs) were fabricated and utilized for targeted fluorescence imaging in tumor cells. Silicon nanoparticles (SiNPs) was firstly synthesized by microwave irradiation method, and then coupled with transferrin in the presence of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). The structural informations of Trf-SiNPs were measured by transmission electron microscope and Fourier transform infrared spectrometer. The optical properties of Trf-SiNPs were characterized by ultraviolet absorption spectrum, fluorescence emission spectrum, fluorescence quantum yield, fluorescence lifetime, photo-stability, and so on. MTT assay evidenced the low toxicity of Trf-SiNPs. Finally, Trf-SiNPs were successfully applied in HeLa cells and HepG2 cells for targeted fluorescence imaging under single-photon excitation and two-photon excitation.

Fabrication of Pt-Loaded Catalysts Supported on the Functionalized Pyrolytic Activated Carbon Derived from Waste Tires for the High Performance Dehydrogenation of Methylcyclohexane and Hydrogen Production

The pyrolytic activated carbon derived from waste tires (PTC) was functionalized to fabricate the high performance of Pt-based catalysts in the dehydrogenation of methylcyclohexane and hydrogen production. Structural characterizations evidenced that the modification partially influenced the surface area, the pore structure, and the oxygen-containing functional groups of the supports. The techniques of CO pulse, transmission electron microscopy, and hydrogen temperature-programmed reduction were utilized to investigate the dispersion degrees and particle sizes of the active component Pt, and its interaction with the various functionalized supports, respectively. The results manifested that Pt particles loaded on the functionalized PTC-S had the largest dispersion degree and the smallest size among those loaded on PTC and other functionalized PTC (i.e., PTC-K and PTC-NH). Finally, the Pt-based catalysts were successfully applied in the dehydrogenation reaction of methylcyclohexane to yield hydrogen. The results revealed that the Pt catalyst over the functional PTC-S support exhibited a more excellent conversion of methylcyclohexane (84.3%) and a higher hydrogen evolution rate (991.5 mmol/gPt/min) than the other resulting Pt-based catalysts.

"Switch-Off-On" Detection of Fe3+ and F- Ions Based on Fluorescence Silicon Nanoparticles and Their Application to Food Samples

An approach to the detection of F⁻ ions in food samples was developed based on a “switch-off-on” fluorescence probe of silicon nanoparticles (SiNPs). The fluorescence of the synthetic SiNPs was gradually quenched in the presence of Fe³⁺ ion and slightly recovered with the addition of F⁻ ion owing to the formation of a stable and colorless ferric fluoride. The fluorescence recovery exhibited a good linear relationship (R² = 0.9992) as the concentration of F⁻ ion increased from 0 to 100 μmol·L⁻¹. The detection limit of the established method of F⁻ ion was 0.05 μmol·L⁻¹. The recovery experiments confirmed the accuracy and reliability of the proposed method. The ultraviolet–visible spectra, fluorescence decays, and zeta potentials evidenced the fluorescence quenching mechanism involving the electron transfer between the SiNPs and Fe³⁺ ion, while the fluorescence recovery resulted from the formation of ferric fluoride. Finally, SiNPs were successfully applied to detect F⁻ ions in tap water, Antarctic krill, and Antarctic krill powder.