A hydrolytically stable amide polar stationary phase for hydrophilic interaction chromatography

Mixed-mode chromatographic performance using nicotinic acid-functionalized chito-oligosaccharide-bonded Ti/Si hybrid monolithic capillary columns

This article describes the fabrication of porous nicotinic acid-functionalized chito-oligosaccharide-bonded titania/silica hybrid monoliths (TiO2/SiO2@ChO-N) through a co-gelation sol-gel process. A capillary monolith with a well-defined and homogeneous structure was obtained by controlling the hydrolysis speed of titanium alkoxides in a sol mixture by using glycerol and acetylacetone. As a result of the functionalization with chito-oligosaccharides (ChO)-modified nicotinic acid, the obtained stationary phase provides superior physiochemical properties, such as a cationic hydrophilic surface, porosity, and mechanical strength. Scanning electron microscope and attenuated total reflectance-infrared spectroscopy were used to characterize the functionalized monolithic columns. The produced capillary columns showed high chromatographic performance with acceptable selectivity for charged analytes as well as organic polar compounds such as nucleic bases, nucleosides, carbamate pesticides, and strobilurin fungicides. The obtained results also indicated that the functionalized ChO's amino, amide, hydroxyl, and pyridinium ring moieties served as hydrophilic electrostatic traps for charged substances, in addition to stroing π-π interaction with the carbamate pesticides and strobilurin fungicides analytes via hydrogen bonding.

A lysine and amide functionalized polymer-based polar stationary phase for hydrophilic interaction chromatography

A novel polymer-based polar stationary phase for hydrophilic interaction chromatography (HILIC) is described. It was obtained by grafting lysine and acrylamide onto poly (glycidyl methacrylate-divinylbenzene) (GMA-DVB) microspheres via ring-opening reaction of epoxy groups and free radical polymerization with pendant double bonds of the microspheres. Multiple types of polar groups including zwitterionic (carboxylate and amine), amide and diol onto the microspheres make them highly hydrophilic. It showed typical HILIC character and good separation performance towards model polar analytes. Negligible bleed level under gradient elution mode (up to 50% fraction of water) was observed. It also exhibited specific separation selectivity to ionic analytes and simultaneous separation of anions and cations could be achieved in ideal electrostatic selectivity elution order, e.g. I-< NO3- Collapse

Key Words

• Bleed
• Glycidyl methacrylate
• Hydrophilic interaction chromatography
• Polymer
• Zwitterionic stationary phase

Collapse

MESH Headings

• Amides
• Lysine
• Acrylamide
• Amines
• Chromatography

Collapse

Grants Collapse

Affiliation(s)

Ziteng Yu Engineering Research Center of Pharmaceutical Process Chemistry, Shanghai Frontiers Science Center of Optogenetic Techniques for Cell Metabolism, School of Pharmacy, East China University of Science and Technology, Shanghai 200237, China
Zongying Li Engineering Research Center of Pharmaceutical Process Chemistry, Shanghai Frontiers Science Center of Optogenetic Techniques for Cell Metabolism, School of Pharmacy, East China University of Science and Technology, Shanghai 200237, China.
Feifang Zhang Engineering Research Center of Pharmaceutical Process Chemistry, Shanghai Frontiers Science Center of Optogenetic Techniques for Cell Metabolism, School of Pharmacy, East China University of Science and Technology, Shanghai 200237, China
Bingcheng Yang Engineering Research Center of Pharmaceutical Process Chemistry, Shanghai Frontiers Science Center of Optogenetic Techniques for Cell Metabolism, School of Pharmacy, East China University of Science and Technology, Shanghai 200237, China.

Collapse

Application of chromatography in purification and structural analysis of natural polysaccharides: A review

Polysaccharides are widely distributed in natural sources from monocytic microorganisms to higher animals, and are found in a variety of biological activities in recent decades. Natural polysaccharides have the characteristics of large molecular weight, diverse composition, and complex structure, so their purification and structural analysis are difficult issues in research. Chromatography as a powerful separation technique, plays an irreplaceable role in the separation and structural analysis of natural polysaccharides, especially in the purification of polysaccharides, the separation of hydrolysates, and the analysis of monosaccharide composition. The separation mechanisms and application of different chromatographic methods in the studies of polysaccharides were summarized in this review. Moreover, the advantages and drawbacks of various chromatography methods were discussed as well.

Factors affecting mixed-mode retention properties of cation-exchange stationary phases

Cation-exchange stationary phases were characterized in different chromatographic modes (HILIC, RPLC, IC) and applied to the separation of non-charged hydrophobic and hydrophilic analytes. The set of columns under investigation included both commercially available cation-exchangers and self-prepared PS/DVB-based columns, the latter consisting of adjustable amounts of carboxylic and sulfonic acid functional groups. The influence of cation-exchange site and polymer substrate on the multimodal properties of cation-exchangers was identified using selectivity parameters, polymer imaging and excess adsorption isotherms. Introducing weakly acidic cation-exchange functional groups to the unmodified PS/DVB-substrate effectively reduced hydrophobic interactions, whilst a low degree of sulfonation (0.09 to 0.27% w/w sulphur) mainly influenced electrostatic interactions. Silica substrate was found to be another important factor for inducing hydrophilic interactions. The presented results demonstrate that cation-exchange resins are suitable for mixed-mode applications and offer versatile selectivity.

A Compendium of the Principal Stationary Phases Used in Hydrophilic Interaction Chromatography: Where Have We Arrived?

Hydrophilic interaction liquid chromatography (HILIC) today is a well-known and largely applied technique to analyse polar compounds such as pharmaceuticals, metabolites, proteins, peptides, amino acids, oligonucleotides, and carbohydrates. Due to the large number of stationary phases employed for HILIC applications, this review aims to help the reader in choosing a proper stationary phase, which often represents the critical point for the success of a separation. A great offer is present for achiral applications in contrast to the chiral phases developed for HILIC enantioseparations. In the last case, up-to-date solutions are presented.

A hyperbranched polyglycerol-functionalized polymer polar stationary phase

A polymer polar stationary phase functionalized with hyperbranched polyglycerol for hydrophilic interaction chromatography (HILIC) is described. It is prepared via surface-initiated ring-opening polymerization of hyperbranched polyglycerol onto hydrolzed poly(glycidyl methacrylate-divinylbenzene) microspheres. The capacity of the functional groups can be maniputed by repeating hyperbranch layers. The phase showed typical HILIC character with good separation performance towards tested polar analytes. It also exhibited wider pH tolerance range (e.g. at least 2 to 12) and as well negligible bleed level under gradient elution mode (even to 50% fraction of water).

Investigation of hydrophilic interaction liquid chromatography coupled with charged aerosol detector for the analysis of tromethamine

Tromethamine (TMM), often encountered in a final drug product, exhibits interesting chemical properties as a counter ion, buffer, or active ingredient. European and US pharmacopeias propose titration against hydrogen chloride for TMM assays. However, this method can be a hindrance when using drugs containing low concentrations of TMM in complex buffered formulations. Due to the lack of chromophores and the high hydrophilicity of TMM, we performed a simple and reliable hydrophilic interaction chromatography coupled with a charged aerosol detector (HILIC-CAD) separation approach as an alternative for TMM analysis. An amide stationary phase and a mobile phase consisting of a binary mixture of acetonitrile and 10 mM ammonium formate, pH 3 (80/20, V/V) were used. As the CAD response deeply depends on parameters such as stationary phases and pH buffer, we investigated their impact and explored the optimal signal conditions. Including TMM analogs such as tris(hydroxymethyl) nitromethane and 2-amino-2-ethyl-1,3-propanediol allowed us to select these parameters appropriately. The effects of the evaporation temperature, flow rate, and power function value (PFV) on the CAD signal response were also studied and optimized. The method was validated according to the ICH Q2 R1 guidelines. A linear response (mean R² > 0.997) covering the range for low TMM concentrations (170-520 μg/mL) was achieved. Satisfactory intra-day and inter-day precisions were obtained with RSDs lower than 1.9% and 2.8%, respectively. The trueness ranged from 99.6% to 101.2%, and the LOD was found to be 1.1 μg/mL. The HILIC-CAD method has been applied to a sterile TMM solution for injection.

A Survey of Polar Stationary Phases for Hydrophilic Interaction Chromatography and Recent Progress in Understanding Retention and Selectivity

Various polar stationary phases have become available for hydrophilic interaction chromatography (HILIC) and help drive continuous applications in biomedical, environmental and pharmaceutical areas in the past decade. Although the stationary phases for HILIC have been reviewed previously, it is an appropriate time to take another look at the progresses during the past five years. The current review provides an overview of the polar stationary phases commercially available for HILIC applications in an effort to assist scientists in selecting suitable columns. New types of stationary phase that were published in literature in the past five years are summarized and discussed. The trend in stationary phase research and development is also highlighted. Of particular interest is the experimental evidence for direct interactions of polar analytes with the ligands of the stationary phases under HILIC conditions. In addition, two different approaches have been developed to delineate the relative significance of the partitioning and adsorption mechanisms in HILIC, representing an important advancement in our understanding of the retention mechanisms in HILIC.