A disposable dual-signal enantioselective electrochemical sensor based on stereogenic porous chiral carbon nanotubes hydrogel

Constructing a novel humidity sensor using acrylic acid/bagasse cellulose porous hydrogel combining graphene oxide and citral for antibacterial and intelligent fruit preservation

A novel hydrogel humidity sensor was developed using acrylic acid/bagasse cellulose (AA/BC) porous hydrogel triggered by cold plasma (CP) combining graphene oxide (GO) and embedding citral for antibacterial and intelligent fruit preservation. Results showed that both GO and citral were loaded in AA/BC and had strong hydrogen bond interaction with hydrogel. Acrylic acid/bagasse cellulose/graphene oxide (AA/BC/GO) showed the highest humidity response when the compound concentration of GO was 1.0 mg/mL and the test frequency was 1 kHz, and exhibited high electrical conductivity (-2.6 mS/cm). In addition, in continuous and cyclic relative humidity (RH) tests, the response time of AA/BC/GO from 33.70 % RH to 75.30 % RH was about 177.4 s and the recovery time was about 150.6 s, with excellent sensitivity and durability. The sensors also revealed remarkable antibacterial properties against Escherichia coli and Staphylococcus aureus, among which acrylic acid/bagasse cellulose/graphene oxide-citral (AA/BC/GO-C) was the most prominent, and could extend the shelf life of mangoes for about 8 days. By intuitively judging the appearances and total color difference (TCD) of the hydrogel sensors, it could play the role of intelligent preservation by connecting their water absorption and the release of citral. Therefore, this work provided innovative strategies for the application of hydrogel sensors in food preservation.

Monitoring levamisole in food and the environment with high selectivity using an electrochemical chiral sensor comprising an MOF and molecularly imprinted polymer

We used an enhanced recognition strategy to fabricate a novel levamisole-detecting chiral electrochemical sensor featuring a metal-organic framework (MOF) combined with a molecularly imprinted polymer (MIP). We first synthesised a Cu/Zn-[benzene-1,3,5-tricarboxylic acid] (Cu/Zn-BTC) MOF as the molecular immobilisation and signal-amplifying unit, and then prepared the MIP (molecular recognition unit) using levamisole as the template on a glassy carbon electrode modified with Cu/Zn-BTC. We obtained a composite chiral sensor with enhanced recognition capability for levamisole after template removal. Using the templated sites as the switch and K3[Fe(CN)6]/K4[Fe(CN)6] as a probe, we established a new method for detecting levamisole in meat products and water bodies. The linear detection range and detection limit of our chiral sensor are 5 to 6000 × 10-11 mol/L and 1.65 × 10-12 mol/L, respectively. Moreover, the sensor exhibited 93.8-109.0% recovery in the detection of levamisole in chicken and other real samples.

A signal amplification for Trp isomers electrochemical recognition based on PEDOT:PSS and CS/PAA multilayers

In this work, enhanced tryptophan (Trp) isomers recognition was successfully demonstrated on (CS/PAA)3.5@PEDOT:PSS/GCE, a multilayer chiral sensor with good stability and reproducibility. The (CS/PAA)n multilayers chiral interface was first fabricated via alternating self-assembly of chiral chitosan (CS) and achiral polyacrylic acid (PAA). Conductive PEDOT:PSS was then compounded with (CS/PAA)n multilayers to obtain the chiral sensor for the electrochemical recognition of Trp isomers. The structure of the sensor and its chirality properties for Trp isomers were characterized by fourier transform infrared spectroscopy (FT-IR)，scanning electron microscopy (SEM) and electrochemical methods. The SEM images showed uniform distribution of PEDOT:PSS in the multilayer films, which changed the internal structure of the (CS/PAA)3.5. Consequently, (CS/PAA)3.5@PEDOT:PSS multilayers rendered more chiral centers in addition to improved good conductivity, which significantly amplified the oxidation peak current ratio of D-Trp to L-Trp (ID/IL) up to 6.71 at 25 °C. In addition, a linear relationship was observed between the peak current and Trp enantiomer concentration in the range of 0.002-0.15 mM, and the detection limits of D-Trp and L-Trp were 0.33 and 0.67 μM, respectively. More importantly, the percentage of D-Trp in non-racemic Trp enantiomers mixture solutions were successfully determined on the chiral interface, showing its effectiveness and promising potential in practical applications.

Chiral Materials: Progress, Applications, and Prospects

Chirality is a universal phenomenon in molecular and biological systems, denoting an asymmetric configurational property where an object cannot be superimposed onto its mirror image by any kind of translation or rotation, which is ubiquitous on the scale from neutrinos to spiral galaxies. Chirality plays a very important role in the life system. Many biological molecules in the life body show chirality, such as the "codebook" of the earth's biological diversity-DNA, nucleic acid, etc. Intriguingly, living organisms hierarchically consist of homochiral building blocks, for example, l-amino acids and d-sugars with unknown reason. When molecules with chirality interact with these chiral factors, only one conformation favors the positive development of life, that is, the chiral host environment can only selectively interact with chiral molecules of one of the conformations. The differences in chiral interactions are often manifested by chiral recognition, mutual matching, and interactions with chiral molecules, which means that the stereoselectivity of chiral molecules can produce changes in pharmacodynamics and pathology. Here, the latest investigations are summarized including the construction and applications of chiral materials based on natural small molecules as chiral source, natural biomacromolecules as chiral sources, and the material synthesized by design as a chiral source.

Temperature and pressure sensitive ionic conductive triple-network hydrogel for high-durability dual signal sensors

In this work, the fabrication of strengthened triple network hydrogels was successfully achieved based on in-situ polymerization of polyacrylamide by combining both chemical and physical cross-linking methods. The ion conductive phase of lithium chloride (LiCl) and solvent in the hydrogel were regulated through soaking solution. The pressure and temperature sensing behavior and durability of the hydrogel were investigated. The hydrogel containing 1 mol/L LiCl and 30 %v/v glycerol displayed a pressure sensitivity of 4.16 kPa^-1 and a temperature sensitivity of 2.04 %/^oC ranging from 20 to 50 °C. The durability results reveal that the hydrogel could maintain water retention rate of 69 % after 20 days of ageing. The presence of LiCl disrupted the interactions among water molecules and made it possible for the hydrogel to respond to changes in environment humidity. The dual signal testing revealed that the delay of temperature response over time (about 100 s) is much different from the rapidity of pressure response (in 0.5 s). This leads to the obvious separation of the temperature-pressure dual signal output. The assembled hydrogel sensor was further applied to monitor human motion and skin temperature. The signals can be distinguished by different resistance variation values and curve shapes in the typical temperature-pressure dual signal performance of human breathing. This demonstrates that this ion conductive hydrogel has the potential for application in flexible sensors and human-machine interfaces.

Chiral MOFs encapsulated by polymers with poly-metallic coordination as chiral biosensors

Chiral materials have drawn the widespread attention for their its chiral recognition ability. The design and synthesis of chiral material are of importance owing to the unpredictability in controlling chirality during the synthesis process. To circumvent problems, a chiral MOF (D-His-ZIF-8) was synthesized by ligand exchange of 2-methylimidazole (Hmim) on ZIF-8 by D-histidine (D-His), which can be treated as chiral host to distinguish amino acid enantiomers. The obtained D-His-ZIF-8 can provide chiral nanochannels for amino acid guests. Meanwhile, polynary transition-metal ion (Co²⁺ and Fe³⁺) coordinating with polydopamine (PDA) wrapped on the surface of D-His-ZIF-8 can increase the active sites. The electrochemical chiral recognition behavior showed that D-His-ZIF-8@CoFe-PDA exhibited good recognition of the tryptophan enantiomer (L/D-Trp) (working potential of -0.2 V vs. Hg/HgCl₂). The LOD and LOQ of L-Trp were 0.066 mM and 0.22 mM, respectively, while the LOD and LOQ of D-Trp were 0.15 mM and 0.50 mM, respectively. Finally, the usefulness of D-His-ZIF-8@CoFe-PDA/GCE was evaluated with a recovery of 94.4-103%. The analysis of real  samples shows that D-His-ZIF-8@CoFe-PDA/GCE is a feasible sensing platform for the detection of L-Trp and D-Trp.

A novel room-temperature formaldehyde gas sensor based on walnut-like WO3 modification on Ni–graphene composites

Ternary composite with great modulation of electron transfers has attracted a lot of attention from the field of high-performance room-temperature (RT) gas sensing. Herein, walnut-like WO3-Ni–graphene ternary composites were successfully synthesized by the hydrothermal method for formaldehyde (HCHO) sensing at RT. The structural and morphological analyses were carried out by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). SEM and TEM studies confirmed that walnut-like WO3 nanostructures with an average size of 53 ± 23 nm were functionalized. The Raman and XPS results revealed that, due to the deformation of the O-W-O lattice, surface oxygen vacancies Ov and surface-adsorbed oxygen species Oc were present. The gas-sensing measurement shows that the response of the WO3-Ni-Gr composite (86.8%) was higher than that of the Ni-Gr composite (22.7%) for 500 ppm HCHO at RT. Gas-sensing enhancement can be attributed to a p-n heterojunction formation between WO3 and Ni-Gr, Oc, spill-over effect of Ni decoration, and a special walnut-like structure. Moreover, long term stability (%R = 61.41 ± 1.66) for 30 days and high selectivity in the presence of other gases against HCHO suggested that the proposed sensor could be an ideal candidate for future commercial HCHO-sensing in a real environment.

Separation of ofloxacin enantiomers by CE with fluorescence detection using DNA oligonucleotides as chiral selectors

This study used CE with fluorescence detection- and partial-filling mode-based method for chiral separation of ofloxacin. The DNA oligonucleotides with different base sequences were studied as potential chiral selectors including DNA tetrahedron, G-quadruplex, and G-riched double-strand DNA. Under the optimized conditions, all the DNA chiral selectors exhibited excellent chiral separation capabilities with a resolution higher than 1.5. The electrophoretic behavior of the ofloxacin enantiomer might result from the intermediate conjugate with different stabilities between chiral selectors and analytes by a combination of the hydrogen bond and spatial recognition structure. Moreover, satisfactory repeatability regarding run-to-run and interday repeatability was obtained, and all the RSD values of migration times and resolutions were below 4% (n = 6). Conclusively, both spatial structure and arrangement of the G bases potentiated the chiral separation capability of DNA for ofloxacin enantiomer. This work offered a stepping stone for enantioseparation using DNA as chiral selectors. This article is protected by copyright. All rights reserved.

The fabrication of a highly electroactive chiral-interface self-assembled Cu(ii)-coordinated binary-polysaccharide composite for the differential pulse voltammetry (DPV) detection of tryptophan isomers

It is of significance to fabricate excellently performing chiral carbon nanocomposites for chiral electrochemical detection applications.