Cr speciation analysis based on electrokinetic sample pretreatment with a paper based analytical device

Tailoring Acid Free-Paper based Analytical Devices (Af-PADs) via radiation assisted modification of cellulose paper

A novel green fabrication approach is being proposed based on radiation assisted modification of Whatman filter paper 1 (WFP) for development of Acid Free-Paper based Analytical Devices (Af-PADs). Af-PADs exude immense potential as handy tools for on-site detection of toxic pollutants such as, Cr(VI), boron, etc., which have established detection protocols involving acid mediated colorimetric reactions that necessitate external acid addition. The proposed Af-PAD fabrication protocol asserts its novelty through elimination of external acid addition step, making the detection process safer and simpler. To achieve this, poly(acrylic acid) (PAA) was grafted onto WFP via a single step, room temperature process of gamma radiation induced simultaneous irradiation grafting, introducing acidic -COOH groups in the paper thereon. Grafting parameters namely, absorbed dose and concentrations of monomer, homopolymer inhibitor and acid were optimized. The -COOH groups incorporated in PAA-grafted-WFP (PAA-g-WFP) provide localized acidic conditions for colorimetric reactions between pollutants and their sensing agents, anchored on the PAA-g-WFP. Af-PADs loaded with 1,5-diphenylcarbazide (DPC) have been ably demonstrated for visual detection and quantitative estimation of Cr(VI) in water samples using RGB image analysis, with LOD value of 1.2 mg.L^-1 and a measurement range comparable to that of commercially available PADs based Cr(VI) visual detection kits.

Immobilization of diphenylcarbazide on paper-based analytical devices for the pre-concentration and detection of chromium VI in water samples

A novel approach using a smartphone for the detection of Cr (VI) has been developed. In this context, two different platforms were designed for the detection of Cr (VI). The first one was synthesized via a crosslinking reaction of chitosan with 1,5-Diphenylcarbazide (DPC-CS). The obtained material was integrated into a paper to develop a new paper-based analytical device (DPC-CS-PAD). The DPC-CS-PAD exhibited high specificity toward Cr (VI). The second platform (DPC-Nylon PAD) was prepared by covalent immobilization of DPC onto a Nylon paper and then its analytical performances regarding Cr (VI) extraction and detection were evaluated. DPC-CS-PAD presented a linear range of 0.1-5 ppm with detection and quantification limits of about 0.04 and 0.12 ppm, respectively. The DPC-Nylon-PAD exhibited a linear response of 0.1-2.5 ppm with detection and quantification limits of 0.06 and 0.2 ppm, respectively. Furthermore, the developed platforms were effectively applied for testing the effect of the loading solution volume for trace Cr (IV) detection. For the DPC-CS material, a volume of 20 mL allowed the detection of 4 ppb of Cr (VI). In the case of DPC-Nylon-PAD, the loading volume of 1 mL permitted the detection of the critical concentration of Cr (VI) in water.

A novel separation and preconcentration methodology based on direct immersion dual-drop microextraction for speciation of inorganic chromium in environmental water samples

In this study, for the first time, a novel separation and preconcentration method of direct immersion dual-drop microextraction (DIDDME) was proposed for the species of inorganic chromium (Cr(III) and Cr(VI)) followed by graphite furnace atomic absorption spectrometry detection. The methodology is based on that two organic drops hold on the needle tips of microsyringes were concurrently immersed in a stirred sample solution. Each drop contains a chelating reagent, which can react with a specific species under the same pH value. Therefore, Cr(III) and Cr(VI) can be selectively extracted into different drops. This procedure did not require tedious and complicated pre-oxidation/pre-reduction and centrifugation/filtration operations, which may lead to the risk of sample contamination and analysis errors. Main parameters influencing separation, preconcentration and identification of the target species were investigated. An enrichment factor of 400-fold was obtained for Cr(III) and Cr(VI). Under the optimized conditions, detection limits for this method were 1.1 ng L^-1 and 1.4 ng L^-1 for Cr(III) and Cr(VI) with relative standard deviations of 5.1 and 6.3%, respectively. This procedure was applied for the separation, preconcentration and determination of Cr(III) and Cr(VI) in environmental water samples and certified reference materials with satisfactory results. Recoveries of spiked experiments ranged from 86.0 to 112%.