PEGylation of boronate-affinity-oriented surface imprinting magnetic nanoparticles with improved performance

Fabricating Ultrathin Imprinting Layer for Fast Capture of Valsartan via a Metal Affinity-Oriented Surface Imprinting Method

Rapid separation and enrichment of targets in biological matrixes are of significant interest in multiple life sciences disciplines. Molecularly imprinted polymers (MIPs) have vital applications in extraction and sample cleanup owing to their excellent specificity and selectivity. However, the low mass transfer rate, caused by the heterogeneity of imprinted cavities in polymer networks and strong driving forces, significantly limits its application in high-throughput analysis. Herein, one novel metal affinity-oriented surface imprinting method was proposed to fabricate an MIP with an ultrathin imprinting layer. MIPs were prepared by immobilized template molecules on magnetic nanoparticles (NPs) with metal ions as bridges via coordination, and then polymerization was done. Under the optimized conditions, the thickness of the imprinting layer was merely 1 nm, and the adsorption toward VAL well matched the Langmuir model. Moreover, it took just 5 min to achieve adsorption equilibrium significantly faster than other reported MIPs toward VAL. Adsorption capacity still can reach 25.3 mg/g ascribed to the high imprinting efficiency of the method (the imprinting factor was as high as 5). All evidence proved that recognition sites were all external cavities and were evenly distributed on the surface of the NPs. The obtained MIP NPs exhibited excellent selectivity and specificity toward VAL, with good dispersibility and stability. Coupled with high-performance liquid chromatography, it was successfully used as a dispersed solid phase extraction material to determine VAL in serum. Average recoveries are over 90.0% with relative standard deviations less than 2.14% at three spiked levels (n = 3). All evidence testified that the MIPs fabricated with the proposed method showed a fast trans mass rate and a large rebinding capacity. The method can potentially use high-throughput separation and enrichment of target molecules in batch samples to meet practical applications.

Facial on-line enrichment of glycoproteins by capillary electrophoresis with boronate-functionalized poly(glycidyl methacrylate) microparticles coated column

A facial and rapid method for glycoproteins enrichment by capillary electrophoresis was developed. The 3-aminophenylboronic acid-functionalized poly(glycidyl methacrylate) microparticles (PGMA@APBA) were attached to the capillary inlet (length of ∼1.5 cm) by electrostatic self-assemble action to prepare a partially coated capillary column. The process is simple and reversible, allowing for easy renewal of the PGMA@APBA coating when its enrichment efficiency decreases. By utilizing the coated column, glycoproteins can be enriched within 2 min. The column exhibits a specific enrichment for glycoproteins and can be consecutively used for approximately 60 runs. The relative standard deviations (RSDs) of peak area of run-to-run (n = 5) and batch-to-batch (n = 3) were 1.5 % and 1.0%, respectively. The method was successfully applied to enrich glycoproteins from 1 × 1012-fold diluted real egg white sample, indicating its practical applicability.

Synthesis of micron-sized magnetic agarose beads chelated with nickel ions towards the affinity-based separation of histidine-tagged/rich proteins

Developing high-performance magnetic particles for the effective separation and purification of target proteins has become an important topic in the area of biomedical research. In this work, a simple and novel strategy was proposed for fabricating magnetic Fe3O4@agarose-iminodiacetic acid-Ni microspheres (MAIN), which can efficiently and selectively isolate histidine-tagged/rich proteins (His-proteins). Based on the thermoreversible sol-gel transition of agarose, basic magnetic agarose microspheres were prepared through the inverse emulsion method, in which the emulsion contained agarose and amine-modified Fe3O4 nanoparticles. The size of the emulsion was controlled by the emulsification of a high-speed shear machine, which improved the specific surface area of MAIN. Subsequently, the amine-modified Fe3O4 nanoparticles were covalently crosslinked with agarose through epichlorohydrin, which could avoid leakage of the magnetic source during use and increase the stability of MAIN. The microsized MAIN exhibited a clearly visible spherical core-shell structure with a diameter range from 3.4 μm to 9.8 μm, and excellent suspension ability in aqueous solution. The maximum adsorption capacity of MAIN for histidine-rich bovine hemoglobin was 1069.2 mg g-1 at 35 °C, which was higher than those of commercialized and most reported magnetic agarose microspheres/nanoparticles. The MAIN showed excellent adsorption ability and selectivity toward His-proteins in a mixture of histidine-rich bovine serum albumin (BSA) and histidine-poor lysozyme (LYZ). When the amount of LYZ was 5-fold higher than that of BSA, the recovery of BSA reached 75.0%. To prove its practicability, MAIN was successfully employed for the enrichment of histidine-tagged RSV-F0 from the cell culture medium supernatant. According to the optimized conditions, MAIN could enrich approximately 0.1 mg of RSV-F0 from 1 mL of complex biological sample. Therefore, we believe that the novel MAIN could be applicable for efficient separation and purification of His-proteins from complex biological systems.

Electrochemical detection of glycoproteins using boronic acid-modified metal-organic frameworks as dual-functional signal reporters

The sensitive analysis of glycoproteins is of great importance for early diagnosis and prognosis of diseases. In this work, a sandwich-type electrochemical aptasensor was developed for the detection of glycoproteins using 4-formylphenylboric acid (FPBA)-modified Cu-based metal-organic frameworks (FPBA-Cu-MOFs) as dual-functional signal probes. The target captured by the aptamer-modified electrode allowed the attachment of FPBA-Cu-MOFs based on the interaction between boronic acid and glycan on glycoproteins. Large numbers of Cu2+ ions in FPBA-Cu-MOFs produced an amplified signal for the direct voltammetric detection of glycoproteins. The electrochemical aptasensor showed a detection limit as low as 6.5 pg mL-1 for prostate specific antigen detection. The method obviates the use of antibody and enzymes for molecular recognition and signal output. The dual-functional MOFs can be extended to the design of other biosensors for the determination of diol-containing biomolecules in clinical diagnosis.

Linking peptide-oriented surface imprinting magnetic nanoparticle with carbon nanotube-based fluorescence signal output device for ultrasensitive detection of glycoprotein

Determination of trace glycoprotein has important guiding significance in clinical diagnosis and is usually achieved by immunoaffinity. However, immunoaffinity possesses inherent drawbacks, such as poor probability of high-quality antibodies, instability of biological reagents, and harmfulness of chemical labels to the body. Herein, we propose an innovative method of peptide-oriented surface imprinting to fabricate artificial antibody for recognition of glycoprotein. By integrating peptide-oriented surface imprinting and PEGylation, an innovative hydrophilic peptide-oriented surface imprinting magnetic nanoparticle (HPIMN) was successfully fabricated with human epidermal growth factor receptor-2 (HER2) as a model glycoprotein template. In addition, we further prepared a novel boronic acid-modified/fluorescein isothiocyanate-loaded/polyethylene glycol-covered carbon nanotube (BFPCN) as fluorescence signal output device, which was loaded with numerous fluorescent molecules could specifically label the cis-diol of glycoprotein at physiological pH via boronate-affinity interaction. To prove the practicability, we proposed a HPIMN-BFPCN strategy, in which the HPIMN first selectively captured the HER2 due to the molecular imprinted recognition and then the BFPCN specific labeled the exposed cis-diol of HER2 based on the boronate-affinity reaction. The HPIMN-BFPCN strategy exhibited ultrahigh sensitivity with limit of detection of 14 fg mL^-1 and was successfully used in the determination of HER2 in spiked sample with recovery and relative standard deviation in the range of 99.0%-103.0% and 3.1%-5.6%, respectively. Therefore, we believe that the novel peptide-oriented surface imprinting has great potential to become an universal strategy for fabrication of recognition units for other protein biomarkers, and the synergy sandwich assay could become a powerful tool in prognosis evaluation and clinical diagnosis of glycoprotein-related diseases.

Construction of PEGylated boronate-affinity-oriented imprinting magnetic nanoparticles for ultrasensitive detection of ellagic acid from beverages

Molecularly imprinted polymers (MIPs) can exhibit antibody-level affinity for target molecules. However, the nonspecific adsorption of non-imprinted regions for non-target molecules limits the application range of MIPs. Herein, we fabricated PEGylated boronate-affinity-oriented ellagic acid-imprinting magnetic nanoparticles (PBEMN), which first integrated boronate-affinity-oriented surface imprinting and sequential PEGylation for small molecule-imprinted MIPs. The resultant PBEMN possess higher adsorption capacity and faster adsorption rate for template ellagic acid (EA) molecules than the non-PEGylated control. To prove the excellent performance, the PBEMN were linked with hydrophilic boronic acid-modified/fluorescein isothiocyanate-loaded graphene oxide (BFGO), because BFGO could selectively label cis-diol-containing substances by boronate-affinity and output ultrasensitive fluorescent signals. Based on a dual boronate-affinity synergy, the PBEMN first selectively captured EA molecules by boronate-affinity-oriented molecular imprinted recognition, and then the EA molecules were further labeled with BFGO through boronate-affinity. The PBEMN linked BFGO (PBPF) strategy provided ultrahigh sensitivity for EA molecules with a limit of detection of 39.1 fg mL^-1, resulting from the low nonspecific adsorption of PBEMN and the ultrasensitive fluorescence signal of BFGO. Lastly, the PBPF strategy was successfully employed in the determination of EA concentration in a spiked beverage sample with recovery and relative standard deviation in the range of 96.5 to 104.2% and 3.8 to 5.1%, respectively. This work demonstrates that the integration of boronate-affinity-oriented surface imprinting and sequential PEGylation may be a universal tool for improving the performance of MIPs.