Covalent organic framework-based solid phase microextraction coupled with electrospray ionization mass spectrometry for sensitive screening and quantitative evaluation of carbamazepine and its metabolite in mice

Thiol-yne click post-synthesis of phenylboronic acid-functionalized magnetic cyclodextrin microporous organic network for selective and efficient extraction of antiepileptic drugs

Owing to their incomplete digestion in the human body and inadequate removal by sewage treatment plants, antiepileptic drugs (AEDs) accumulate in water bodies, potentially affecting the exposed humans and aquatic organisms. Therefore, sensitive and reliable detection methods must be urgently developed for monitoring trace AEDs in environmental water samples. Herein, a novel phenylboronic acid-functionalized magnetic cyclodextrin microporous organic network (Fe3O4@CD-MON-PBA) was designed and synthesized via the thiol-yne click post-modification strategy for selective and efficient magnetic solid-phase extraction (MSPE) of trace AEDs from complex sample matrices through the specific B-N coordination, π-π, hydrogen bonding, electrostatic, and host-guest interactions. Fe3O4@CD-MON-PBA exhibited a large surface area (118.5 m2 g-1), rapid magnetic responsiveness (38.6 emu g-1, 15 s), good stability and reusability (at least 8 times), and abundant binding sites for AEDs. Under optimal extraction conditions, the proposed Fe3O4@CD-MON-PBA-MSPE-HPLC-UV method exhibited a wide linear range (0.5-1000 μg L-1), low limits of detection (0.1-0.5 μg L-1) and quantitation (0.3-2 μg L-1), good anti-interference ability, and large enrichment factors (92.2-104.3 to 92.3-98.0) for four typical AEDs. This work confirmed the feasibility of the thiol-yne click post-synthesis strategy for constructing novel and efficient multifunctional magnetic CD-MONs for sample pretreatment and elucidated the significance of B-N coordination between PBA and N-containing AEDs.

Synthesis of a cysteine functional covalent organic framework via facile click reaction for the efficient solid phase extraction of substituted p-phenylenediamine-derived quinones

N,N'-Substituted p-phenylenediamine quinones (PPD-Qs) are the emerging toxicant, which transform from the rubber tire antioxidant N,N'-substituted p-phenylenediamines (PPDs). Because of their potential toxic and widespread occurrence in the environment, PPD-Qs have received great attention. However, efficiently extracting PPD-Qs from complex samples is still a challenge. Herein, a cysteine functional covalent organic framework (Cys-COF) designed according to the "donor-acceptor" sites of hydrogen bonding of PPD-Qs was synthesized via click reaction and then used as solid-phase extraction (SPE) adsorbent. Cys-COF can form the seven-member ring adsorption structure with PPD-Qs via hydrogen bonding. The adsorption mechanism was tentatively revealed by density functional theory (DFT). After optimizing the Cys-COF-SPE parameters, PPD-Qs were efficiently extracted from water, soil, sediment, and fish, followed by detection using ultra-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The Cys-COF-SPE-UHPLC-MS/MS method exhibited ideal linearity (R2 ≥ 0.9932), high relative recoveries (80.4-111 %), and low limits of detection (0.0001-0.0013 ng mL-1). In addition, the bioconcentration kinetics in goldfish provides a feasible platform to investigate the toxicity and accumulated ability of PPD-Qs.

Layer-by-layer fabrication of covalent organic frameworks on stainless steel needles as solid-phase microextraction probe coupled with electrospray ionization mass spectrometry for enrichment and determination of tyrosine kinase inhibitors in biosamples

Sunitinib, N-desmethyl imatinib, dasatinib, imatinib, and bosutinib are tyrosine kinase inhibitors (TKIs) that are commonly employed in the treatment of a multitude of cancers. However, the inappropriate concentrations of TKIs can result in ineffective treatment or the emergence of multiple adverse effects. Consequently, the development of a rapid and sensitive analytical method for TKIs is of paramount importance for the safe administration of drugs. In this work, solid-phase microextraction (SPME) probe combined with an electrospray ionization mass spectrometry (ESI-MS) coupling platform was constructed for rapid and sensitive determination of TKIs. The covalent organic frameworks (COFs) coated SPME probe was made of 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) and 2,5-dibutoxyterephthalaldehyde (DBTA) by in-situ layer-by-layer chemical bonding synthesis strategy. The TAPT-DBTA-SPME probe exhibited several advantageous properties which rendered it suitable for the enrichment of TKIs. Under the optimal conditions, the developed analytical method demonstrated a broad linear range (0.05-500.00 µg/L), a low limit of detection (0.02 µg/L) and a high enrichment factor (51-203) for TKIs. The developed analytical method was successfully applied to a pharmacokinetic study of TKIs in mouse plasma and tissue matrix, demonstrating that the proposed analytical method has promise for clinical applications and metabolic monitoring.

Rapid and sensitive determination of legacy and emerging per- and poly-fluoroalkyl substances with solid-phase microextraction probe coupled with mass spectrometry

This study was designed to develop a rapid and sensitive method for quantifying legacy and emerging per- and polyfluoroalkyl substances (PFASs) in environmental samples with solid-phase microextraction (SPME) coupled with mass spectrometry (MS). An innovative SPME probe was fabricated via in situ polymerization, and the probe coating was optimized with response surface methodology to maximize the fluorine-fluorine interactions and electrostatic properties and ensure high selectivity for the target PFASs with enrichment factors of 48-491. The coupled SPME and MS provided a rapid and sensitive method for analyses of PFASs, with excellent linearity (r ≥ 0.9962) over the concentration range 0.001-1 μg/L and remarkably low detection limits of 0.1-13.0 ng/L. This method was used to analyze trace PFASs in tap water, river water, and wastewater samples and proved to be a simple and efficient analytical method for selective enrichment and detection of contaminants in the environment.

In situ fabrication of covalent organic frameworks on solid-phase microextraction probes coupled with electrospray ionization mass spectrometry for enrichment and determination of androgens in biosamples

Solid-phase microextraction (SPME) coupled with electrospray ionization mass spectrometry (ESI-MS) was developed for rapid and sensitive determination of endogenous androgens. The SPME probe is coated with covalent organic frameworks (COFs) synthesized by reacting 1,3,5-tri(4-aminophenyl)benzene (TPB) with 2,5-dioctyloxybenzaldehyde (C8PDA). This COFs-SPME probe offers several advantages, including enhanced extraction efficiency and stability. The analytical method exhibited wide linearity (0.1-100.0 µg L-1), low limits of detection (0.03-0.07 µg L-1), high enrichment factors (37-154), and satisfactory relative standard deviations (RSDs) for both within one probe (4.0-14.8%) and between different probes (3.4-12.7%). These remarkable performance characteristics highlight the reliability and precision of the COFs-SPME-ESI-MS method. The developed method was successfully applied to detect five kinds of endogenous androgens in female serum samples, indicating that the developed analytical method has great potential for application in preliminary clinical diagnosis.

Greenness assessment of microextraction techniques in therapeutic drug monitoring

Aim: In this study, we evaluated the greenness and whiteness scores for microextraction techniques used in therapeutic drug monitoring. Additionally, the cons and pros of each evaluated method and their impacts on the provided scores are also discussed. Materials & methods: The Analytical Greenness Sample Preparation metric tool and white analytical chemistry principles are used for related published works (2007-2023). Results & conclusion: This study provided valuable insights for developing methods based on microextraction techniques with a balance in greenness and whiteness areas. Some methods based on a specific technique recorded higher scores, making them suitable candidates as green analytical approaches, and some others achieved high scores both in green and white areas with a satisfactory balance between principles.

Recent progress of covalent organic frameworks as attractive materials for solid-phase microextraction: A review

Solid-phase microextraction (SPME) is a green, environmentally friendly, and efficient technique for sample pre-treatment. Covalent organic frameworks (COFs), a class of porous materials formed by covalent bonds, have gained prominence owing to their remarkable attributes, including large specific surface area, tunable pore size, and robust thermal/chemical stability. These characteristics have made COFs highly appealing as potential coatings for SPME fiber over the past decades. In this review, various methods used to prepare SPME coatings based on COFs are presented. These methods encompass physical adhesion, sol-gel processes, in situ growth, and chemical cross-linking strategies. In addition, the applications of COF-based SPME coating fibers for the preconcentration of various targets in environmental, food, and biological samples are summarized. Moreover, not only their advantages but also the challenges they pose in practical applications are highlighted. By shedding light on these aspects, this review aims to contribute to the continued development and utilization of COF materials in the field of sample pretreatment.

Hierarchical covalent organic framework hollow nanofibers-bonded stainless steel fiber for efficient solid phase microextraction

The solid phase microextraction (SPME) technique has been widely applied in the detection of trace compounds in food, environment, and medicine due to its advantages of easy quantification, simple operation, and greenness. Herein, a templating strategy with SiO2 nanofibers (SiO2 NFs) is reported to synthesize hierarchical covalent organic framework hollow nanofibers (COF HNFs)-coated stainless steel fiber for SPME application with dramatically enhanced enrichment performance for trace analytes. The construction of hierarchical porosity inside the microextraction coatings can not only increase the specific surface area of COF extraction materials for obtaining more abundant adsorption sites but also greatly improve the accessibility of internal COF micropores. Moreover, the thicknesses of the microextraction COF coatings can be facilely tailored by adjusting the amount of SiO2 NFs pre-assembled on the SPME fibers. On the headspace solid phase microextraction (HS-SPME) of antimicrobial residues, the developed COF TpBD-Me2 HNFs-12 fibers achieve enrichment factors of 2026 and 1823 for thymol and carvacrol respectively, which are significantly higher than those obtained from the counterpart COF TpBD-Me2-bonded fiber (8.5-8.2 times) and commercial CAR/PDMS fiber (3.3-4.4 times). Furthermore, the developed method was demonstrated to have wide linearity (0.1-50 μg L-1), low limits of detection (0.010 μg L-1), good thermal stability and excellent reusability (>60 recycles), demonstrating great application potential in the extraction of trace organic pollutants. The strategy developed in this work is applicable to preparing a variety of topological COF (e.g., TpBD, TpPa-1) HNFs-bonded fibers.

Nylon 6-cellulose composite hosted in a hypodermic needle: Biofluid extraction and analysis by ambient mass spectrometry in a single device

This study proposes a hypodermic needle (HN) as a sorbent holder and an electrospray (ESI) emitter, thus combining extraction and analysis in a single device. A novel nylon 6-cellulose (N6-Cel) composite sorbent is proposed to extract methadone from oral fluid samples. The cellulosic substrate provides the composite with high porosity, permitting the flow-through of the sample, while the polyamide contributes to the extraction of the analyte. The low price of the devices (considering the holder and the sorbent) contributes to the affordability of the method, and their small size allows easy transportation, opening the door to on-site extractions. Under the optimum conditions, the analyte can be determined by high-resolution ambient ionization mass spectrometry at a limit of detection (LOD) as low as 0.3 μg/L and precision (expressed as relative standard deviation, RSD) better than 9.3%. The trueness, expressed as relative recovery (RR), ranged from 90% to 109%. As high-resolution mass spectrometers are not available in many laboratories, the method was also adapted to low-resolution spectrometers. In this sense, the direct infusion of the eluates in a triple quadrupole-mass spectrometry provided an LOD of 2.2 μg/L. The RSD was better than 5.3%, and the RR ranged from 96% to 121%.

Facile synthesis of spherical covalent organic frameworks for enrichment and quantification of aryl organophosphate esters in mouse serum and tissues

Here, an imine-linked-based spherical covalent organic framework (COF) was prepared at room temperature. The as-synthesized spherical COF served as an adsorbent in dispersive solid-phase extraction (dSPE), by its virtue of great surface area (1542.68 m2 /g), regular distribution of pore size (2.95 nm), and excellent stability. Therefore, a simple and high-efficiency dispersive solid phase extraction method based on a spherical COF coupled with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established to determine aryl organophosphate esters in biological samples. This approach displayed favorable linearity in the range of 10.0-1000.0 ng/L (r > 0.9989), a high signal enhancement factor (58.8-181.8 folds) with low limits of detection (0.3-3.3 ng/L). Moreover, it could effectively eliminate complex matrix interference to accurately extract seven aryl organophosphate esters from mouse serum and tissue samples with spiked recoveries of 82.0%-117.4%. The as-synthesized spherical COF has been successfully applied in sample preparation. The dSPE-HPLC-MS/MS method based on a spherical COF has potential application to study the pollutants' metabolism in vivo.

Advanced porous organic materials for sample preparation in pharmaceutical analysis

The development of novel sample preparation media plays a crucial role in pharmaceutical analysis. To facilitate the extraction and enrichment of pharmaceutical molecules in complex samples, various functionalized materials have been developed and prepared as adsorbents. Recently, some functionalized porous organic materials have become adsorbents for pharmaceutical analysis due to their unique properties of adsorption and recognition. These advanced porous organic materials, combined with consequent analytical techniques, have been successfully used for pharmaceutical analysis in complex samples such as environmental and biological samples. This review encapsulates the progress of advanced porous materials for pharmaceutical analysis including pesticides, antibiotics, chiral drugs, and other compounds in the past decade. In addition, we also address the limitations and future trends of these porous organic materials in pharmaceutical analysis.

Spatio-Temporal Analysis of Anesthetics in Mice by Solid-Phase Microextraction: Dielectric Barrier Discharge Ionization Mass Spectrometry

Local anesthetics, drugs that only affect a restricted area of the body, are widely used in daily clinical practice. Less studied but equally important is the distribution of local anesthetics inside organisms. Here, we present a rapid in situ testing method of drug distribution in various organs. The temporal and spatial distribution of anesthetics in mice was measured by solid-phase microextraction (SPME), thermal desorption (TD), and dielectric barrier discharge ionization (DBDI) atmospheric pressure mass spectrometry. A coated SPME probe using a tungsten wire as the support covered with a carbonaceous material was prepared by a simple, low-cost flame method. An in-line structure of the inlet allows TD and DBDI to share the same capillary tube, which greatly improves the transmission efficiency. Nine kinds of anesthetics, such as lidocaine and dyclonine, were detected, and the limit of detection was determined to be as low as 13 pg/mL. In addition, the time-dependent distribution of drugs in mice organs was studied. We also found that macromolecules in organisms do not noticeably interfere with the detection. This method is convenient and efficient because it does not require tissue homogenates and allows direct in situ detection. Compared with the conventional analytical methods, this method is simple and rapid, works in situ, and allows microscale analysis of trace analytes in biological organisms with high sensitivity.

Development of Magnetic Molecularly Imprinted Polymer Coupled Nanospray Ion Source for Analysis of Cephalosporin Antibiotics in Food Samples

A magnetic molecularly imprinted polymer (MMIP) coupled nanospray ion source was developed for analysis of cephalosporin antibiotics in food samples. MIP coated Fe₃O₄ nanospheres were prepared for magnetic solid-phase extraction (MSPE) of the antibiotics in the extract of samples and then integrated into the nanospray capillary for further desorption and mass spectrometry analysis. The developed device combines the advantages of high extraction efficiency of MSPE, unique selectivity of MIPs, and fast analysis speed of ambient ionization mass spectrometry (AIMS). Five cephalosporin antibiotics in milk, egg, and beef samples were analyzed using the developed methods. High sensitivities with limits of detection (LODs) from 0.3 to 0.5 μg kg^-1 were achieved for cephalosporin antibiotics in milk, egg, and beef samples, respectively. Good linearity, determination coefficient values (R² > 0.992), and precision (RSD < 15%) with recoveries ranging from 72.6% to 115.5% were obtained using the spiked milk, egg, and beef sample matrices.

Facile synthesis of triazine-based porous organic polymer for the extraction and determination of nitrofuran metabolites residues from meat samples with ultra-high performance liquid chromatography-quadrupole time of flight mass spectrometry

In this work, a novel triazine-based porous organic polymers, TAPT-BPDD, was firstly synthesized by a facile method at room temperature. After characterized by FT-IR, FE-SEM, XRPD, TGA, and nitrogen-sorption experiments, TAPT-BPDD was applied as solid-phase extraction (SPE) adsorbent for the extraction of four trace nitrofuran metabolites (NFMs) from meat samples. The key parameters including the adsorbent dosage, sample pH, type and volume of eluents, type of washing solvents were evaluated in the extraction process. Combined with ultra-high performance liquid chromatography-quadrupole time of flight mass spectrometry (UHPLC-QTOF-MS/MS) analysis, good linear relationship (1-50 µg·kg^-1, R²>0.9925) and low limits of detection (LODs, 0.05-0.56 µg·kg^-1) were obtained under the optimal conditions. When spiked at different level, the recoveries were in the range of 72.7-111.6%. The adsorption isothermal model and extraction selectivity of TAPT-BPDD were also studied in detail. The results showed that TAPT-BPDD was a kind of promising SPE adsorbent for the enrichment of organics in food samples.

In-situ growth of covalent organic framework on stainless steel needles as solid-phase microextraction probe coupled with electrospray ionization mass spectrometry for rapid and sensitive determination of tricyclic antidepressants in biosamples

Tricyclic antidepressants (TCAs) including amitriptyline (AT), doxepin (DOX) and nortriptyline (NT) are the first-line drugs for the clinical treatment of depression; however, monitoring TCA concentrations in biological fluids and tissues is necessary to improve therapeutic effect and determine the cause of death in patients. It is of great significance to develop a rapid and sensitive method for real-time monitoring of TCAs in various biosamples. In this work, we fabricated a novel covalent organic framework (COF) based solid-phase microextraction (SPME) probe by an in-situ step-by-step strategy, which was obtained by sequentially modifying 1,3,5-tri (4-aminophenyl) benzene (TPB) and 2, 5-divinylbenzaldehyde (DVA) on the surface of polydopamine layer. The TPB-DVA-COF-SPME probe possessed high specific surface area (1244 m²·g ^- 1), regular pores (3.23 nm), good hydrophobicity and stability, resulting in efficient enrichment for TCAs. Furthermore, the combination of TPB-DVA-COF-SPME probe and ambient electrospray ionization mass spectrometry system (ESI/MS) was firstly proposed for rapid and sensitive determination of TCAs in biosamples. As a result, the developed method exhibited low limits of detection (LODs) (0.1-0.5 μg∙L ^- 1), high enrichment factors (39-218), and low relative standard deviations (RSDs) for one probe (1.2-3.8%) and probe-to-probe (2.0-3.7%). Benefiting from these outstanding performance, TPB-DVA-COF-SPME probe was further successfully applied to biosamples (i.e., serum, liver, kidney, and brain) with excellent reusability, indicating the promising applicability of the TPB-DVA-COF-SPME-ESI/MS as a powerful tool for drug monitoring.

Three-dimensional hydroxylated covalent organic frameworks for solid phase extraction of glucocorticoids in environmental water samples

It is challenging to achieve the highly sensitive detection of glucocorticoids at ultratrace levels because of the abundant hydrophilic groups in their molecules and the complexity of environmental water sample matrices. Here, a highly crystalline three-dimensional hydroxylated covalent organic frameworks (denoted by COF-301) with tetra(4-anilyl)methane (TAM) and 2,5-dihydroxyterephthalaldehyde (DHTA) as building units was constructed and proposed as adsorbent for solid phase extraction (SPE) of glucocorticoids. Theoretical studies were conducted to elucidate the potential adsorption mechanism of glucocorticoids on the COF-301. The COF-301 based SPE combined with liquid chromatography-tandem mass spectrometry provides a promising approach for the preconcentration and determination of glucocorticoids residue in water samples. Good linearity with a correlation coefficient exceeding 0.9988, low limits of detection ranging from 0.024 to 0.075 ng L^-1 and relative standard deviations below 6.68% were achieved. The proposed method was successfully applied to analyze glucocorticoids residue in actual water samples, demonstrating the prospects of this method for the determination of trace glucocorticoids.

Hydroxyl-riched covalent organic framework for solid-phase microextraction of flavonoids aglycones or their metabolites in mice's plasma: Luteolin and quercetagetin as examples

Herein, a hydroxyl‑riched covalent organic framework (named COF-DES-1) was synthesized using 1,3,5-tris(4-aminophenyl)benzene and 2,5-dihydroxyterephthalaldehyde as building blocks and employed as a coating of solid-phase microextraction (SPME) fiber. Ascribed to the advantages (e.g. suitable pore size and rich functional group characteristics) of coating, the SPME fiber showed good adsorption capacities to flavonoids aglycones including luteolin and quercetagetin, and the maximum adsorption capacities for them were 145.31 µg and 84.75 µg, respectively. Due to the size exclusion property of COF-DES-1, SPME fiber showed good protein exclusion effects on seven selected proteins with high exclusion efficiencies (>93%). Accordingly, an attractive strategy of the combination of COF-DES-1 based SPME fiber and HPLC-MS/MS was proposed for the extraction and determination of luteolin, quercetagetin or their metabolites. The results revealed that the fiber can be effectively applied to extract luteolin and its metabolites, and quercetagetin from mice's palsma. Compared with the traditional protein precipitation methods, the extraction effects of SPME fiber based extraction method were much better, indicating the promising applicability of the fiber for the enrichment of flavonoids aglycones or their metabolites in biological samples.

Recent applications of organic molecule-based framework porous materials in solid-phase microextraction for pharmaceutical analysis

Sample preparation is an indispensable part of detection of complex samples in pharmaceutical analysis. Solid-phase microextraction (SPME) has obtained a lot of attention due to its advantages of time saving, less solvent and easily automation. A variety of functional materials are used as sorbents in SPME to carry out selective and high extraction. This review centers around the recent applications of organic molecule-based framework porous materials, such as metal organic frameworks (MOFs) and covalent organic frameworks (COFs), as SPME coating materials mainly focus on pharmaceutical analysis in food, environment, and biological samples. Four representative extraction devices are introduced, including on-fiber SPME, in-tube SPME, thin film SPME, stir bar SPME. The application prospect of other organic porous materials as sorbents for pharmaceutical analysis are also discussed, such as hyper crosslinked polymers (HCPs) and conjugated microporous polymers (CMPs). The progresses and discusses are provided to offer references for further research focusing on application and development of organic molecule-based framework porous materials in the field of SPME.

The direct immersion solid phase microextraction coupled with the LC–MS method for ex vivo determination of selected date-rape drugs in the human blood samples

Nowadays, solid phase microextraction is developing rapidly. The use of this extraction technique allowed for the reduction of toxic solvents usage, easy automatization, and integration with other techniques. In this study, the use of DI-SPME/LC–MS to determine selected date-rape drugs (benzodiazepines, ketamine, and cocaine) is presented. The determined values of validation parameters: limits of detection (LOD = 0.6–4.9 ng cm−3), and quantification (LOQ = 25 or 50 ng cm−3), intra-day and inter-day precision (CV = 0.87–10.7% and 4.96–16.1%, respectively), recovery (RE = 94.6–106.7%) and matrix effect (81.7–116.5%) indicated that the tested method could be used to determine the concentration of date-rape drugs in blood samples. The evaluation of the method according to the principles of White Analytical Chemistry showed that the DI-SPME/LC–MS method was characterized by satisfactory analytical quality, greenness, and economical use. The use of this method met the requirements of Green Chemistry. The significant advantages of this method were the quick analytical procedure, partial automation of the extraction stages, high sensitivity, lower sample, and reagent consumption.

Graphical abstract