Use of slow atomization ramp in high resolution continuum source graphite furnace atomic absorption spectrometry for the simultaneous determination of Cd and Ni in slurry powdered chocolate samples

A portable solid sampling visualization nano-sensor for soil Cd based on "three-phase transforming" technique

Direct analysis of solid samples is always challenging for ionic sensors due to solidified elemental presence and matrix interference. In this work, a "three-phase transforming" technique was first established to make solid sampling elemental sensors and visual detection possible in the future. For Cd transforming from soil samples, a metal ceramic heater (MCH) electrothermal vaporizer (ETV) coupled with a dielectric barrier discharge quartz trap (DBD-QT) was first utilized to fulfill the solid sampling and preconcentration of Cd in soil; for on-site analysis, a colorimetric sensor based on the trithiocyanuric acid (TMT) functionalized gold nanoparticles (AuNPs) was chosen as a chromogenic analysis model. The portable and miniature ETV-DBD apparatus directly introduced Cd from soil and then captured Cd, consuming only <130 W and 4.5 kg weight; finally, only 200 μL water was injected as eluent to dissolve Cd for the following colorimetric detection. Herein, the Cd analyte underwent a "three-phase transforming" from solid (Cd compounds in soil), to aerosol (vaporization and transportation), to solid (Cd oxides trapped on quartz surface) and to liquid (Cd2+ in eluate). Under optimized conditions, the method limit of detection (LOD) reached 0.04 mg/kg Cd (50 mg sample), fulfilling fast monitoring of Cd contamination in soil, with <20 % relative standard deviations (RSDs). The analysis time was <10 min excluding sample digestion and acid application, as well as the interference of Pb2+ on the AuNPs sensor can be eliminated via the "three-phase transforming" process, proving an excellent anti-interference for solid analysis. This "three-phase transforming" processing technique coupled with colorimetric sensor holds a great potential for direct and on-site analysis in solid samples without complicated handling, providing a fantastic methodology for the application of ionic sensors and making solid sampling elemental sensor and visual detection possible.

Rapid and Portable Detection of Hg and Cd in Grain Samples Based on Novel Catalytic Pyrolysis Composite Trap Coupled with Miniature Atomic Absorption Spectrometry

As toxic metals, Hg and Cd are a concern for food safety and human health; their rapid and portable analysis is still a challenge. A portable and rapid Hg-Cd analyzer constructed from a metal-ceramic heater (MCH)-based electrothermal vaporizer (ETV), an on-line catalytic pyrolysis furnace (CPF), a composite Pt/Ni trap, and a homemade miniature atomic absorption spectrometer (AAS) was proposed for grain analysis in this work. To enhance sensitivity, a new folded light path was designed for simultaneous Hg and Cd analysis using charge coupled device (CCD) in AAS. To eliminate the grain matrix interference, a catalytic pyrolysis furnace with aluminum oxide fillers was utilized to couple with a composite Pt/Ni trap. The method limits of detection (LODs) were 1.1 μg/kg and 0.3 μg/kg for Hg and Cd using a 20 mg grain sample, fulfilling the real sample analysis to monitor the grain contamination quickly; linearity R² > 0.995 was reached only using standard solution calibration, indicating the sample was free of grain matrix interference. The favorable analytical accuracy and precision were validated by analyzing real and certified reference material (CRM) grains with recoveries of 97-103% and 96-111% for Hg and Cd, respectively. The total analysis time was less than 5 min without sample digestion or use of any chemicals, and the instrumental size and power consumption were <14 kg and 270 W, respectively. Compared with other rapid methods, this newly designed Hg-Cd analyzer is proven to be simple, portable, and robust and is, thus, suitable to quickly monitor Hg and Cd contamination in the field to protect grain and food safety.

Fast Detection of Cadmium in Chocolate by Solid Sampling Electrothermal Vaporization Atomic Absorption Spectrometry and Its Application on Dietary Exposure Risk Assessment

In this work, a rapid detection method using solid sampling electrothermal vaporization atomic absorption spectrometry (SS-ETV-AAS) was established for cadmium in chocolate. The instrumental system includes a solid sampling ETV unit, a catalytic pyrolysis furnace, an AAS detector, and a gas supply system with only an air pump and a hydrogen generator. Herein, MgO material with 1.0−1.5 mm particle size was first employed to replace the kaolin filler previously used to further shorten the peak width and to thereby improve the sensitivity. With 350 mL/min of air, a chocolate sample was heated for 25 s from 435 to 464 °C to remove water and organic matrices; then, after supplying 240 mL/min hydrogen and turning down air to 120 mL/min, a N2/H2 mixture gas was formed to accelerate Cd vaporization from chocolate residue under 465 to 765 °C. Under the optimized conditions, the detection limit (LOD) was obviously lowered to 70 pg/g (vs. previous 150 pg/g) with R2 > 0.999; the relative standard deviations (RSD) of repeated measurements for real chocolate samples ranged from 1.5% to 6.4%, indicating a favorable precision; and the Cd recoveries were in the range of 93−107%, proving a satisfied accuracy. Thus, the total analysis time is less than 3 min without the sample digestion process. Thereafter, 78 chocolate samples with different brands from 9 producing countries in China market were collected and measured by this proposed method. Based on the measured Cd concentrations, a dietary exposure assessment was performed for Chinese residents, and the target hazard quotient (THQ) values are all less than 1, proving no significant health risk from intaking chocolate cadmium for Chinese residents.