A SERS/electrochemical dual-signal readout immunosensor using highly-ordered Au/Ag bimetallic cavity array as the substrate for simultaneous detection of three β-adrenergic agonists

Eu(III) functionalized ZnMOF based efficient dual-emission sensor integrated with self-calibrating logic gate for intelligent detection of epinephrine

The rapid detection of epinephrine (EPI) in serum holds immense importance in the early disease diagnosis and regular monitoring. On the basis of the coordination post-synthetic modification (PSM) strategy, a Eu3+ functionalized ZnMOF (Eu3+@ZnMOF) was fabricated by anchoring the Eu3+ ions within the microchannels of ZnMOF as secondary luminescent centers. Benefiting from two independent luminescent centers, the prepared Eu3+@ZnMOF shows great potential as a multi-signal self-calibrating luminescent sensor in visually and efficiently detecting serum EPI levels, with high reliability, fast response time, excellentrecycleability, and low detection limits of 17.8 ng/mL. Additionally, an intelligent sensing system was designed in accurately and reliably detecting serum EPI levels, based on the designed self-calibrating logic gates. Furthermore, the possible sensing mechanisms were elucidated through theoretical calculations as well as spectral overlaps. This work provides an effective and promising strategy for developing MOFs-based self-calibrating intelligent sensing platforms to detect bioactive molecules in bodily fluids.

Application of Surface-Enhanced Raman Spectroscopy Combined with Immunoassay for the Detection of Adrenoceptor Agonists

Rapid, sensitive, and accurate detection of adrenoceptor agonists is a significant research topic in the fields of food safety and public health. Immunoassays are among the most widely used methods for detecting adrenoceptor agonists. In recent years, surface-enhanced Raman spectroscopy combined with immunoassay (SERS-IA) has become an effective technique for improving detection sensitivity. This review focuses on the innovation of Raman reporter molecules and substrate materials for the SERS-IA of adrenoceptor agonists. In addition, it also investigates the challenges involved in potentially applying SERS-IA in the detection of adrenoceptor agonists. Overall, this review provides insight into the design and application of SERS-IA for the detection of adrenoceptor agonists, which is critical for animal-derived food safety and public health.

Comparison of immunoassay and LC-tandem mass spectrometry analyses of ractopamine in hog oral fluid

The accurate detection of ractopamine in food animals is crucial for marketing since some entities require animals or animal carcasses to be free of ractopamine residues. Field-based ractopamine screening tests that are rapid, sensitive, and capable of high-throughput are highly desirable to ensure that inadvertent exposure to ractopamine did not occur in animals marketed as animals that have not been fed ractopamine. An immunochemically based lateral flow assay was used to analyze oral fluids from hogs never exposed to ractopamine and from hogs that were presumed positives and results were confirmed using an enhanced sensitivity LC-MSMS method. We found that an immunochemically based lateral flow system having a working range of 2.5 to 15 ng mL-1 worked well as a screening assay with 1.7% false positive results in freshly collected hog oral fluids. Using ractopamine glucuronide standards and LC-MSMS, we determined that the false positive results were not due to the presence of ractopamine glucuronide metabolites in oral fluids.

A sandwich amperometric immunosensor for the detection of fowl adenovirus group I based on bimetallic Pt/Ag nanoparticle-functionalized multiwalled carbon nanotubes

An enzyme-free sandwich amperometric immunosensor based on bimetallic Pt/Ag nanoparticle (Pt/AgNPs)-functionalized chitosan (Chi)-modified multiwalled carbon nanotubes (MWCNTs) as dual signal amplifiers and Chi-modified MWCNTs (MWCNTs-Chi) as substrate materials was developed for ultrasensitive detection of fowl adenovirus group I (FAdV-I). MWCNTs have a large specific surface area, and many accessible active sites were formed after modification with Chi. Hence, MWCNTs-Chi, as a substrate material for modifying glassy carbon electrodes (GCEs), could immobilize more antibodies (fowl adenovirus group I-monoclonal antibody, FAdV-I/MAb). Multiple Pt/AgNPs were attached to the surface of MWCNTs-Chi to generate MWCNTs-Chi-Pt/AgNPs with high catalytic ability for the reaction of H2O2 and modified active sites for fowl adenovirus group I-polyclonal antibody (FAdV-I/PAb) binding. Amperometric i-t measurements were employed to characterize the recognizability of FAdV-I. Under optimal conditions, and the developed immunosensor exhibited a wide linear range (100.93 EID50 mL-1 to 103.43 EID50 mL-1), a low detection limit (100.67 EID50 mL-1) and good selectivity, reproducibility and stability. This immunosensor can be used in clinical sample detection.

Advance in Detection Technique of Lean Meat Powder Residues in Meat Using SERS: A Review

Food that contains lean meat powder (LMP) can cause human health issues, such as nausea, headaches, and even death for consumers. Traditional methods for detecting LMP residues in meat are often time-consuming and complex and lack sensitivity. This article provides a review of the research progress on the use of surface-enhanced Raman spectroscopy (SERS) technology for detecting residues of LMP in meat. The review also discusses several applications of SERS technology for detecting residues of LMP in meat, including the enhanced detection of LMP residues in meat based on single metal nanoparticles, combining metal nanoparticles with adsorbent materials, combining metal nanoparticles with immunizing and other chemicals, and combining the SERS technology with related techniques. As SERS technology continues to develop and improve, it is expected to become an even more widely used and effective tool for detecting residues of LMP in meat.

Design, Fabrication, and Applications of SERS Substrates for Food Safety Detection: Review

Sustainable and safe food is an important issue worldwide, and it depends on cost-effective analysis tools with good sensitivity and reality. However, traditional standard chemical methods of food safety detection, such as high-performance liquid chromatography (HPLC), gas chromatography (GC), and tandem mass spectrometry (MS), have the disadvantages of high cost and long testing time. Those disadvantages have prevented people from obtaining sufficient risk information to confirm the safety of their products. In addition, food safety testing, such as the bioassay method, often results in false positives or false negatives due to little rigor preprocessing of samples. So far, food safety analysis currently relies on the enzyme-linked immunosorbent assay (ELISA), polymerase chain reaction (PCR), HPLC, GC, UV-visible spectrophotometry, and MS, all of which require significant time to train qualified food safety testing laboratory operators. These factors have hindered the development of rapid food safety monitoring systems, especially in remote areas or areas with a relative lack of testing resources. Surface-enhanced Raman spectroscopy (SERS) has emerged as one of the tools of choice for food safety testing that can overcome these dilemmas over the past decades. SERS offers advantages over chromatographic mass spectrometry analysis due to its portability, non-destructive nature, and lower cost implications. However, as it currently stands, Raman spectroscopy is a supplemental tool in chemical analysis, reinforcing and enhancing the completeness and coverage of the food safety analysis system. SERS combines portability with non-destructive and cheaper detection costs to gain an advantage over chromatographic mass spectrometry analysis. SERS has encountered many challenges in moving toward regulatory applications in food safety, such as quantitative accuracy, poor reproducibility, and instability of large molecule detection. As a result, the reality of SERS, as a screening tool for regulatory announcements worldwide, is still uncommon. In this review article, we have compiled the current designs and fabrications of SERS substrates for food safety detection to unify all the requirements and the opportunities to overcome these challenges. This review is expected to improve the interest in the sensing field of SERS and facilitate the SERS applications in food safety detection in the future.

Magnetic polyphosphazene@Au particles as substrates for multiple-detection of immunoproteins by surface-enhanced Raman spectroscopy

Au coated magnetic polyphosphazene (MPCTP) composite particles (MPCTP@Au) were fabricated with sensitive SERS activity. The MPCTP particles were generated by coating polyphosphazene on Fe₃O₄ nanoparticles through precipitation polycondensation of hexachlorocyclotriphosphazene and phloroglucinol. MPCTP@Au composite particles were obtained by deposition of Au nanoparticles on MPCTP by the reduction of HAuCl₄. The size and the thickness of the Au shell can be controlled by varying the amount of HAuCl₄. The magnetic core endowed the composite particles with good magnetic responsiveness, which allowed the analyte to be enriched and separated from the complex matrix, and significantly simplifying the sample pretreatment procedure. The SERS activity of MPCTP@Au composite particles were evaluated by DTNB as model Raman reporter, and the limits of detection (LOD) of DTNB was 10^-8 mol/L. A high efficient SERS immunoassay system based on the MPCTP@Au substrates for the detection of immunoproteins was developed. Human IgG and rabbit IgG were quantitatively determinated simultaneously by this immunoassay system. The quantitative determination of the immunoglobulin G (IgG) was achieved and the LOD of human IgG, rabbit IgG and the mixture of human IgG and rabbit IgG were as low as 10 fg/mL, 100 pg/mL and 1 ng/mL, respectively. The results showed that the MPCTP@Au composite particles have broad application prospects as high performance SERS active substrates for immunoprotein analysis.