ZIF-8 labelled a new electrochemical aptasensor based on PEI-PrGO/AuNWs for DON detection

High sensitive Ratiometric fluorescent Aptasensor with AIE properties for Deoxynivalenol (DON) detection

An emerging fluorescent ratiometric aptasensor based on gold nanoclusters (AuNCs) with aggregation-induced emission (AIE) properties was prepared and studied for deoxynivalenol (DON) detection. The ratiometric aptasensor used red fluorescent AuNCs620 labelled with DON aptamer (Apt-AuNCs620) as an indicator and green fluorescent AuNCs519 modified by complementary DNA (cDNA) and magnetic beads (MBs) as internal reference, namely MBs-cDNA-AuNCs519. Under the optimal conditions, the aptasensor exhibited two good linear ranges of 0.1-50 and 50-5000 pg/mL for DON detection with coefficient of determination (R2) of 0.9937 and 0.9928, respectively, and the low detection limit (LOD) of 4.09 pg/mL was achieved. Furthermore, this aptasensor was feasible to detect DON in positive wheat samples, and the results were in line with those from HPLC and ELISA, thus providing a promising route to detect DON with high sensitivity in cereals, even for other mycotoxins by replacing the suitable aptamer and cDNA.

Determination of deoxynivalenol (DON) by a label-free electrochemical immunosensor based on NiFe PBA nanozymes

Deoxynivalenol (DON) contamination in food products significantly threatens human health, necessitating a reliable and sensitive detection method. This study aims to develop a simple, low-cost, and effective electrochemical immunoassay method for detecting DON based on the nickel‑iron bimetallic Prussian blue analog (NiFe PBA). The NiFe PBA nanozymes with high peroxidase-like activity were synthesized using an environmentally friendly chemical precipitation method. In the presence of hydrogen peroxide (H2O2), the current change of thionine oxidation initiated by NiFe PBA nanozymes can be exploited to diagnose DON. Under optimal conditions, the proposed method achieved quantitative detection of DON in the range of 10-107 pg mL-1 with a detection limit of 4.5 pg mL-1 (S/N = 3), demonstrating excellent selectivity, reproducibility, and stability. In addition, the DON immunosensor provides satisfactory results for the detection in real samples, demonstrating the feasibility of the proposed sensor in detecting of DON in such products.

A Surface-Enhanced Raman Spectroscopy-Based Aptasensor for the Detection of Deoxynivalenol and T-2 Mycotoxins

The quality of food is one of the emergent points worldwide. Many microorganisms produce toxins that are harmful for human and animal health. In particular, mycotoxins from Fusarium fungi are strictly controlled in cereals. Simple and robust biosensors are necessary for 'in field' control of the crops and processed products. Nucleic acid-based sensors (aptasensors) offer a new era of point-of-care devices with excellent stability and limits of detection for a variety of analytes. Here we report the development of a surface-enhanced Raman spectroscopy (SERS)-based aptasensor for the detection of T-2 and deoxynivalenol in wheat grains. The aptasensor was able to detect as low as 0.17% of pathogen fungi in the wheat grains. The portable devices, inexpensive SERS substrate, and short analysis time encourage further implementation of the aptasensors outside of highly equipped laboratories.

A sensitive aptasensor mediated by gold nanoparticles/metal organic framework lattice for detection of Pb2+ ion in marine products

Herein, an enzyme-free fluorescent aptasensor was introduced for the ultrasensitive quantification of lead (Pb2+) ion as a hazardous pollutant of the environment and foodstuffs. A nanocomposite of zeolitic imidazolate frameworks-8 and gold nanoparticles (ZIF-8@AuNPs) was utilized as an efficient quencher of the fluorescence intensity of carboxyfluorescein (FAM) signal reporter. The establishment of a hybrid structure between attached aptamer on ZIF-8@AuNPs nanocomposite, and its FAM-tagged complementary (CP) strand decreased the fluorescence response. The preferential binding between the aptamer and Pb2+ released CP strands, which retrieved the fluorescence signal. The aptasensor could assess Pb2+ in the linear concentration range of 1 pM-1 nM with a detection limit (LOD) of 0.24 pM. Besides, it could quantify Pb2+ in various samples, including fish, shrimp, tap water, milk, and serum samples. The developed aptasensor with the superiorities of easiness, cost-effectiveness, easy-to-operate, and rapidness is promising for controlling marine foodstuff safety.

Innovations in Biosensor Technologies for Healthcare Diagnostics and Therapeutic Drug Monitoring: Applications, Recent Progress, and Future Research Challenges

This comprehensive review delves into the forefront of biosensor technologies and their critical roles in disease biomarker detection and therapeutic drug monitoring. It provides an in-depth analysis of various biosensor types and applications, including enzymatic sensors, immunosensors, and DNA sensors, elucidating their mechanisms and specific healthcare applications. The review highlights recent innovations such as integrating nanotechnology, developing wearable devices, and trends in miniaturisation, showcasing their transformative potential in healthcare. In addition, it addresses significant sensitivity, specificity, reproducibility, and data security challenges, proposing strategic solutions to overcome these obstacles. It is envisaged that it will inform strategic decision-making, drive technological innovation, and enhance global healthcare outcomes by synthesising multidisciplinary insights.

Ultrasensitive Electrochemiluminescence Biosensing Platform Based on Polymer Dots with Aggregation-Induced Emission for Dual-Biotoxin Assay

Multitarget assay has always been a hot topic in electrochemiluminescence (ECL) methods. Herein, a "on-off-on" ECL aptasensor was developed for the ultrasensitive and sequential detection of possible biological warfare agents, deoxynivalenol (DON) and abrin (ABR). As a luminophore, polymer dots (Pdots) with aggregation-induced emission exhibit high ECL efficiency in the aptasensor, i.e., the signal "on" state. The DON assays mainly depend on ECL quenching due to the efficient quenching effect between ferrocene-H2-ferrocene (Fc-H2-Fc) and Pdots, i.e., the signal "off" state. When the aptasensor is incubated with the oligonucleotide sequence S2 to replace Fc-H2-Fc, obvious ECL recovery occurs, i.e., the signal "on" state, which can be used to sequentially detect ABR. The limit of detection (LOD) for DON is 0.73 fg·mL-1 in the range of 5.0 to 50 ng·mL-1; and the LOD for ABR is ∼0.38 pg·mL-1 in the range of 1.25 pg·mL-1 to 1.25 μg·mL-1. The as-designed ECL aptasensor exhibits good stability and reproducibility, high specificity, and favorable practicality. Therefore, this work provides a new approach for assays of DON and ABR in food safety and can be used as a model to design an ultrasensitive ECL biosensor for multitarget detection.

State-of-the-art electrochemical biosensors based on covalent organic frameworks and their hybrid materials

As the development of global population and industry civilization, the accurate and sensitive detection of intended analytes is becoming an important and great challenge in the field of environmental, medical, and public safety. Recently, electrochemical biosensors have been constructed and used in sensing fields, such as antibiotics, pesticides, specific markers of cancer, and so on. Functional materials have been designed and prepared to enhance detection performance. Among all reported materials, covalent organic frameworks (COFs) are emerging as porous crystalline materials to construct electrochemical biosensors, because COFs have many unique advantages, including large surface area, high stability, atom-level designability, and diversity, to achieve a far better sensing performance. In this comprehensive review, we not only summarize state-of-the-art electrochemical biosensors based on COFs and their hybrid materials but also highlight and discuss some typical examples in detail. We finally provide the challenge and future perspective of COFs-based electrochemical biosensors.