An ‘off–on’ fluorescent chemosensor of selectivity to Cr3+ and its application to MCF-7 cells

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

A novel fluorescent "Off-On" probe based on phenanthro[9,10-d]imidazole conjugated polymers (PIPF) for Cr3+ detection with high selectivity and sensitivity

Trivalent chromium (Cr3+) causes serious environmental pollution, degradation of the quality of edible agricultural products and human diseases. A novel phenanthro[9,10-d]imidazole-derived conjugated polymers (PIPF) was obtained from 4-(5,10-dibromo-1H-phenanthro[9,10-d]imidazol-2-yl)phenol and diethyl 4,4'-(2,7-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9H-fluorene-9,9-diyl)dibutyrate by Suzuki polymerization reaction, which was reasonably demonstrated by 1H NMR spectroscopy, infrared spectroscopy and quantum chemical calculations. The PIPF exhibits a "turn-on" fluorescence response to Cr3+ in DMSO/H2O (98:2, v/v) with naked-eye detection. The limit of detection for Cr3+ was calculated to be 0.073 μM with a linear range of 3-9 μM. The possible mechanism of the PIPF-based Cr3+ fluorescence "turn-on" sensor is due to the inhibition of the PET process by the coordination of Cr3+ to the hexaalkyl ester carbon chain of PIPF (RCOO-). The high sensitivity, good selectivity, and utility of this sensor indicated that PIPF-based "turn-on" fluorescence sensor is a potential fluorescence application for measuring Cr3+ in environmental samples.

A rhodamine based fluorescent and colorimetric chemosensor for the detection of Cr3+ ions and its utility in a molecular logic gate

A new rhodamine based fluorescent and colorimetric chemosensor S1 was synthesized for the selective recognition of Cr3+, a trivalent metal ion. The interaction of S1 toward different metal ions has been studied via fluorescence and UV-visible spectroscopy. The studies revealed that the fluorescence and colorimetric changes of chemosensor S1 are prominent for Cr3+ over other competitive metal ions. Moreover, the chemosensor S1 exhibits 1 : 1 complex formation with Cr3+ as apparent from the Job's plot and the Benesi-Hildebrand (B-H) plot. Density functional theory (DFT) studies also revealed that the Cr3+ ion is coordinated to three atoms of S1, which validates the formation of a complex between S1 and Cr3+. The limit of detection (LOD) of chemosensor S1 for Cr3+ was 0.21 μM. Furthermore, to explore the recyclability of S1, ethylenediaminetetraacetic acid (EDTA) was added to the S1-Cr3+ solution. On the addition of EDTA to the solution of S1-Cr3+, the reversibility of the complex was observed, and a colorimetric variation was also observed on the addition of Cr3+ and EDTA to S1 which mimics the "INHIBIT "molecular logic gate. Chemosensor S1 also demonstrated practical utility through detection of Cr3+ in the solid state.

A potent multifunctional Ag/Co-polyvinylpyrrolidone nanocomposite for enhanced detection of Cr(III) from environmental samples and its photocatalytic and antibacterial applications

Trivalent chromium (Cr(III)) is considered to exhibit hormesis (bi-phasic dose-response) property, where low dose be beneficial and high dose shows toxic effect. The present work describe the development of a bimetallic Ag/Co-polyvinylpyrrolidone nanocomposite (Ag/Co-PVP NPs) probe to detect and quantify Cr(III) ions from aqueous samples. The hydrodynamic size and zeta potential of the particle was determined to be 29 ± 1.3 nm and -37.19 ± 2.4 mV respectively. The interaction of Cr(III) with Ag/Co-PVP probe showed drastic change in colour of NPs from dark brown to pale yellow, with corresponding blue shift, tapering width and increased peak intensity. The probe showed high specificity towards Cr(III) among the tested metal ions. A linearity was observed between various dilutions of Cr(III) ions (10 to 50 nM) and the absorbance of Ag/Co-PVP NPs at 428 nm with R² value of 0.998. The minimum detectable limit of Cr(III) was calculated to be 0.6 nM. The influence of salinity, temperature and pH on detection was studied. The probe was found to detect Cr(III) at acidic pH effectively. Competitive metal ions did not interfere the detection of Cr(III). The water sample collected from Noyyal river was taken to estimate Cr(III) by using the prepared probe to ensure practical applicability. The sample contains 9.3 nM of Cr(III) that was cross verified with AAS analysis. Hence, it is understood that the reported probe can be used to detect Cr(III) selectively with high accuracy from aqueous samples. In addition, the particles also exhibited excellent photocatalytic activity under visible light. Ag/Co-PVP nanocomposites exhibited excellent antibacterial activity against both gram +ve (B. subtilis) and gram -ve (E. coli) bacteria.

Potentially toxic elements and environmentally-related pollutants recognition using colorimetric and ratiometric fluorescent probes

A safer detection or sensing of toxic pollutants is one among several environmental contamination issues, across the globe. The ever-increasing industrial practices and controlled or uncontrolled release of toxic pollutants from various industrial sectors is a key source of this environmental problem. Significant research efforts have been or being made to tackle this problematic issue to fulfill the growing needs of the modern world. Despite many useful aspects, heavy metals are posing noteworthy toxicological concerns and human-health related issues at various levels of the ecosystem. In this context, notable efforts from various regulatory authorities, the increase in the concentration of these toxic heavy metals in the environment is of serious concern, so real-time monitoring is urgently required. Herein, we reviewed fluorescent sensor based models and their potentialities to address the detection fate of hazardous pollutants including chromium, manganese, cobalt, nickel, copper, and zinc as model elements. The novel aspects of turn-on/off fluorescent sensors have also been discussed from a state of the art viewpoint. In summary, comprehensive literature regarding fluorescent sensor based models and their potentialities to detect various types of toxic pollutants is reviewed.

Exploration of solvent responsive Cr3+-Schiff base conjugates formonitoring Cr3+ ions and organophosphates: Fabrication of spot-testingdevices

Herein, we report 2-((2-hydroxybenzylidene)hydrazono)(phenyl)methyl)-5-methoxyphenol (SB) synthesized by Schiff base condensation and characterized by spectroscopic techniques, elemental analysis and X-ray crystallography. In solution phase, it interacts with Cr³⁺ ions and exhibits a prominent fluorimetric switch due to the formation of SB·Cr³⁺ conjugate. The dual behavior of SB·Cr³⁺ conjugates i.e. self-aggregation in high water fraction (f_w > 50%) and dissolution in low water fraction (f_w < 50%) proves this conjugation excellent tool for monitoring Cr³⁺ ions. The SB·Cr³⁺ conjugate in methanol-water (70:30 v/v) allows quantification of Cr³⁺ ions with limit of detection 0.44 μM and its self-aggregation in high water fraction facilitates extraction of Cr³⁺ ions with 95% extraction efficiency. Although SB interacts with Zn²⁺ ions which causes inference in the determination of Cr³⁺ ions however the interferent can be easily masked with SCN^- ions. Besides, the SB·Cr³⁺ conjugates are also able to quantify organophosphate neurotoxins; i.e. diethyl chlorophosphate (with LOD 4.1 nM) and diethyl cyanophosphonate (with LOD 3.3 nM) from aqueous solutions. Moreover, SB and SB·Cr³⁺ conjugates can be coated on solid surfaces to fabricate portable devices for the on-spot detection of targets from real samples. Hence, the conjugation of Schiff base and Cr³⁺ ions can be explored for the recognition, quantification and extraction of Cr³⁺ ions and detection of organophosphates.

Luminescent Zn(II) Coordination Polymers for Highly Selective Sensing of Cr(III) and Cr(VI) in Water

Three photoluminescent zinc coordination polymers (CPs), {[Zn₂(tpeb)₂(2,5-tdc)(2,5-Htdc)₂]·2H₂O}_n (1), {[Zn₂(tpeb)₂(1,4-ndc)(1,4-Hndc)₂]·2.6H₂O}_n (2), and {[Zn₂(tpeb)₂(2,3-ndc)₂]·H₂O}_n (3) (tpeb = 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene, 2,5-tdc = 2,5-thiophenedicarboxylic acid, 1,4-ndc = 1,4-naphthalenedicarboxylic acid, and 2,3-ndc = 2,3-naphthalenedicarboxylic acid) were prepared from reactions of Zn(NO₃)₂·6H₂O with tpeb and 2,5-H₂tdc, 1,4-H₂ndc, or 2,3-H₂ndc under solvothermal conditions. Compound 1 has a two-dimensional (2D) grid-like network formed from bridging 1D [Zn(tpeb)]_n chains via 2,5-tdc dianions. 2 and 3 possess similar one-dimensional (1D) double-chain structures derived from bridging the [Zn(tpeb)]_n chains via pairs of 1,4-ndc or 2,3-ndc ligands. The solid-state, visible emission by 1-3 was quenched by Cr³⁺, CrO₄^2-, and Cr₂O₇^2- ions in water with detection limits by the most responsive complex 3 of 0.88 ppb for Cr³⁺ and 2.623 ppb for Cr₂O₇^2- (pH = 3) or 1.734 ppb for CrO₄^2- (pH = 12). These values are well below the permissible limits set by the USEPA and European Union and the lowest so far reported for any bi/trifunctional CPs sensors. The mechanism of Cr³⁺ luminescence quenching involves irreversible coordination to free pyridyl sites in the CP framework, while the Cr⁶⁺ quenching involves reversible overlap of the absorption bands of the analytes with those of the excitation and/or emission bands for 3.

Dimethyl yellow-based colorimetric chemosensors for “naked eye” detection of Cr3+ in aqueous media via test papers

New dimethyl yellow-based dipodal receptors as colorimetric probes were designed and synthesised for selectively sensing Cr³⁺ in a “naked eye” output manner via test papers.

Bodipy/dipyridylamino-based “turn-on” fluorescent chemosensor for trivalent chromium cations: characterization and photophysical properties

{{3,5-Bis[4,4-difluoro,8-(2,6-diethyl,1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene)]}}phenyl-N,N-di(pyridin-2-yl)benzamide (Bodipy-DPy) was designed as an efficient fluorescent chemosensor for Cr(iii).

Fluorescent, MRI, and colorimetric chemical sensors for the first-row d-block metal ions

Transition metals (d-blocks) are recognized as playing critical roles in biology, and they most often act as cofactors in diverse enzymes; however, improper regulation of transition metal stores is also connected to serious disorders. Therefore, the monitoring and imaging of transition metals are significant for biological research as well as clinical diagnosis. In this article, efforts have been made to review the chemical sensors that have been developed for the detection of the first-row d-block metals (except Cu and Zn): Cr, Mn, Fe, Co, and Ni. We focus on the development of fluorescent sensors (fall into three classes: "turn-off", "turn-on", and ratiometric), colorimetric sensors, and responsive MRI contrast agents for these transition metals (242 references). Future work will be likely to fill in the blanks: (1) sensors for Sc, Ti, and V; (2) MRI sensors for Cr, Mn, Co, Ni; (3) ratiometric fluorescent sensors for Cr(6+), Mn(2+), and Ni(2+), explore new ways of sensing Fe(3+) or Cr(3+) without the proton interference, as well as extend applications of MRI sensors to living systems.

A Novel Fluorescent Sensor for Fe3+ and Cr3+ based on a calix[4]arene bearing two coumarin units

A novel turn-on fluorescent sensor based on a calix[4]arene with two coumarin units as fluorophores and iminogroups as ionophores on the upper rim has been synthesised. Its recognition properties towards heavy and transition metal ions have been studied by UV-Vis and fluorescence spectrometry. The compound showed an enhanced fluorescent intensity in the presence of Fe3+ or Cr3+ ion, a high selectivity to Fe3+ or Cr3+ ions and a complexation ratio towards Fe3+ or Cr3+ of 1:1. The association constant for Fe3+ was 5.37×105 M−1 and for Cr3+ was 9.18×105 M−1.