An efficient synthesis of 2H-indazoles via reductive cyclization of 2-nitrobenzylamines induced by low-valent titanium reagent

Innovative cascade reaction for 2H-indazole derivative synthesis

In the realm of synthetic organic chemistry, by using a one-pot sequential combination of MCR, it is possible to manufacture chemical commodities (fine chemicals, agrochemicals, and pharmaceutical substances) that enhance our quality of life while generating less waste materials and increasing economic advantages. With this motivation, using a "one-pot" method with multiple components, we present a relatively simple way to make stereoselective substitute 2H-indazole analogues for this study. Firstly, functionalised 3-bromo-4-((methylthio)methyl) derivatives were produced using DMSO as both a carbon source and a solvent, in conjunction with TMSOTf as the Lewis acid promoter. These derivatives were then utilised in the synthesis of 2-H-indazole derivatives with an up to 80% yield using t-Bu3PHBF4 as the ligand and Cs2CO3 as the base, in the presence of a Pd catalyst at 100°C in an airtight tube. The phenyl ring is endowed with an electron-releasing group situated at position C-6, which efficiently synthesises several 2-H-indazol derivatives with cost-efficient and noteworthy yields by using this method. A comparative analysis of a number of halogen derivatives was also undertaken, using a variety of solvents that were classified according to their halogen group. To confirm the structures of the synthesised target compounds, spectrometric analysis (1H NMR, 13C NMR, and LCMS) was performed.

A review on synthetic strategy, molecular pharmacology of indazole derivatives, and their future perspective

With different nitrogen-containing heterocyclic moieties, Indazoles earn one of the places among the top investigated molecules in medicinal research. Indazole, an important fused aromatic heterocyclic system containing benzene and pyrazole ring with a chemical formula of C₇ H₆ N₂ , is also called benzopyrazole. Indazoles consist of three tautomeric forms in which 1H-tautomers (indazoles) and 2H-tautomers (isoindazoles) exist in all phases. The tautomerism in indazoles greatly influences synthesis, reactivity, physical and even the biological properties of indazoles. The thermodynamic internal energy calculation of these tautomers points view 1H-indazole as the predominant and stable form over 2H-indazole. The natural source of indazole is limited and exists in alkaloidal nature (i.e., nigellidine, nigeglanine, nigellicine, etc.) found from Nigella plants. Some of the FDA-approved drugs like Axitinib, Entrectinib, Niraparib, Benzydamine, and Granisetron are being used to treat renal cell cancer, non-small cell lung cancer (NSCLC), epithelial ovarian cancer, chronic inflammation, chemotherapy-induced nausea, vomiting, and many more uses. Besides all these advantages regarding its biological activity, the main issue about indazoles is the less abundance in plant sources, and their synthetic derivatives also often face problems with low yield. In this review article, we discuss its chemistry, tautomerism along with their effects, different schematics for the synthesis of indazole derivatives, and their different biological activities.

Direct Formation of 2-Substituted 2H-Indazoles by a Pd-Catalyzed Reaction between 2-Halobenzyl Halides and Arylhydrazines

A direct and operationally simple method for the regioselective synthesis of 2-aryl-substituted 2H-indazoles is reported. The Pd-catalyzed reaction between easily available 2-bromobenzyl bromides and arylhydrazines employing Cs₂CO₃ as the base and t-Bu₃PHBF₄ as the ligand in DMSO at 120 °C in a sealed tube delivers the 2-substituted-2H-indazoles in a single synthetic step with yields up to 79%. The new method is based on a regioselective intermolecular N-benzylation followed by intramolecular N-arylation and oxidation.

An Operationally Simple and Efficient Synthesis of 7-Benzylidene-substitutedphenyl- 3,3a,4,5,6,7-hexahydro-2H-indazole by Grinding Method

BACKGROUND

An eco-friendly, operationally simple and efficient reaction is shown between various 2,6-bis-(substituted-benzylidene)-cyclohexanones and differently substituted hydrazine in the presence of acetic acid.

METHODS

The reaction between various 2,6-bis-(substituted-benzylidene)-cyclohexanones and differently substituted hydrazine in the presence of acetic acid afforded 7-Benzylidene-substituted-phenyl-3,3a,4,5,6,7- hexahydro-2H-indazole in 74 to 92 % yield in short reaction time using the grindstone technique.

RESULTS AND DISCUSSION

The notable advantages of this method include mild synthetic conditions, weak acid catalysis, and non-hazardous solvent which make this method environmentally safer.

CONCLUSION

In conclusion, we have developed an efficient, simple and eco-friendly method for the synthesis of 7-Benzylidene-substituted-phenyl-3,3a,4,5,6,7-hexahydro-2H-indazole by grinding technique. The notable benefits of this method are waste minimization, no organic solvent required, simple procedure, easy work-up, and clean reaction profile.

Room-Temperature, Metal-Free, and One-Pot Preparation of 2H-Indazoles through a Mills Reaction and Cyclization Sequence

The Mills reaction and cyclization of readily available 2-aminobenzyl alcohols and nitrosobenzenes using thionyl bromide provided 2H-indazoles in up to 88 % yields. In the metal-free process, acetic acid played a crucial role for the both Mills reaction and cyclization. A brominated 2H-indazole could also be obtained through the one-pot sequence.

Copper nanoparticles supported on charcoal mediated one-pot three-component synthesis of N-substituted-2H-indazoles via consecutive condensation C–N and N–N bond formation

An efficient and straightforward protocol for direct synthesis of 2H-indazoles is achieved from consecutive condensation of 2-halobenzaldehydes, primary amines, and sodium azide catalyzed by heterogeneous copper nanoparticles on charcoal (Cu/C) is achieved. The recoverable heterogeneous copper nanoparticles on charcoal (Cu/C) catalyst exhibited an impressive activity for the title reaction without any additives (expensive ligands, etc.). A series of structurally diverse 2H-indazoles were prepared in good to excellent yields from easily accessible starting materials by employing this protocol.

Access to 2-substituted-2H-indazoles via a copper-catalyzed regioselective cross-coupling reaction

A CuCl catalyzed C-N cross-coupling reaction using commercially available 1H-indazoles with diaryliodonium salts is described. The methodology features ample structural versatility, affording 2-substituted-2H-indazole in good yields and complete N(2)-regiocontrol. Furthermore, the utility of the reaction was demonstrated in the synthesis of a known estrogen receptor β agonist. Mechanistic studies using density functional theory calculations suggested that the complete regioselectivity can be attributed to the only weak base TfO^- in our system which could not deprotonate indazoles, and the catalyst oxidation process would be the rate-determining step.

A General One-Pot Synthesis of 2H-Indazoles Using an Organophosphorus-Silane System

A simple and direct approach for the regioselective construction of the privileged 2H-indazole scaffold is described. The developed one-pot strategy involves phospholene-mediated N-N bond formation to access 2H-indazoles. The amount of organophosphorus reagent was minimized by recycling the phospholene oxide with organosilane reductants. Starting from functionalized 2-nitrobenzaldehydes and primary amines, a mild reductive cyclization, involving the use of commercially available phospholene oxide and silanes, delivered a wide variety of substituted 2H-indazoles in good to excellent yields.

Regioselective Synthesis of Pyranone-Fused Indazoles via Reductive Cyclization and Alkyne Insertion

A novel and efficient method for the one-pot synthesis of 2 H-indazole from readily available building blocks is reported. The reaction of 2-nitrobenzylamines with zinc and ammonium formate underwent partial reduction to nitroso-benzylamine followed by an intramolecular cyclization to afford 2 H-indazole via N-N bond formation. The carboxylic acid moiety of indazole was proceeded to regioselective alkyne insertion under ruthenium catalysis to form pyranone-fused indazoles. The regioselectivity is influenced by the weak coordination of indazole ring nitrogen to the metal center.

A Biphilic Phosphetane Catalyzes N-N Bond-Forming Cadogan Heterocyclization via PIII/PV═O Redox Cycling

A small-ring phosphacycle, 1,2,2,3,4,4-hexamethylphosphetane, is found to catalyze deoxygenative N-N bond-forming Cadogan heterocyclization of o-nitrobenzaldimines, o-nitroazobenzenes, and related substrates in the presence of hydrosilane terminal reductant. The reaction provides a chemoselective catalytic synthesis of 2H-indazoles, 2H-benzotriazoles, and related fused heterocyclic systems with good functional group compatibility. On the basis of both stoichiometric and catalytic mechanistic experiments, the reaction is proposed to proceed via catalytic P^III/P^V═O cycling, where DFT modeling suggests a turnover-limiting (3+1) cheletropic addition between the phosphetane catalyst and nitroarene substrate. Strain/distortion analysis of the (3+1) transition structure highlights the controlling role of frontier orbital effects underpinning the catalytic performance of the phosphetane.

Sn(ii)-Mediated facile approach for the synthesis of 2-aryl-2H-indazole-3-phosphonates and their anticancer activities

The efficient synthesis of 2-aryl-2H-indazole-3-phosphonates has been achieved successfully via a SnCl₂·2H₂O mediated one-pot method.

Organophosphorus-mediated N-N bond formation: facile access to 3-amino-2H-indazoles

A convenient and efficient strategy has been devised to access 3-amino-2H-indazole derivatives in two steps from readily available starting materials. The conversion of 2-nitrobenzonitriles to substituted benzamidines followed by an organophosphorus-mediated reductive cyclization and a subsequent N-N bond formation afforded 3-amino-2H-indazoles in good to excellent yields.

Synthesis of indazole motifs and their medicinal importance: an overview

Indazoles is an important class of heterocyclic compounds having a wide range of biological and pharmaceutical applications. There is enormous potential in the synthesis of novel heterocyclic systems to be used as building blocks for the next generation of pharmaceuticals as anti-bacterial, anti-depressant and anti-inflammatory. Fused aromatic 1H and 2H-indazoles are well recognized for anti-hypertensive and anti-cancer properties. The present review focuses on novel routes of their synthesis and various biological activities.

Identification of pyrrolo[2,3-g]indazoles as new Pim kinase inhibitors

The synthesis and Pim kinase inhibition potency of a new series of pyrrolo[2,3-g]indazole derivatives is described. The results obtained in this preliminary structure-activity relationship study pointed out that sub-micromolar Pim-1 and Pim-3 inhibitory potencies could be obtained in this series, more particularly for compounds 10 and 20, showing that pyrrolo[2,3-g]indazole scaffold could be used for the development of new potent Pim kinase inhibitors. Molecular modeling experiments were also performed to study the binding mode of these compounds in Pim-3 ATP-binding pocket.