CO 2 -expanded bio-based liquids as novel solvents for enantioselective biocatalysis

Application of Biobased Solvents in Asymmetric Catalysis

The necessity of more sustainable conditions that follow the twelve principles of Green Chemistry have pushed researchers to the development of novel reagents, catalysts and solvents for greener asymmetric methodologies. Solvents are in general a fundamental part for developing organic processes, as well as for the separation and purification of the reaction products. By this reason, in the last years, the application of the so-called green solvents has emerged as a useful alternative to the classical organic solvents. These solvents must present some properties, such as a low vapor pressure and toxicity, high boiling point and biodegradability, and must be obtained from renewable sources. In the present revision, the recent application of these biobased solvents in the synthesis of optically active compounds employing different catalytic methodologies, including biocatalysis, organocatalysis and metal catalysis, will be analyzed to provide a novel tool for carrying out more ecofriendly organic processes.

Integrated and Metal Free Synthesis of Dimethyl Carbonate and Glycidol from Glycerol Derived 1,3-Dichloro-2-propanol via CO2 Capture

Dimethyl carbonate (DMC) and glycidol are considered industrially important chemical entities and there is a great benefit if these moieties can be synthesized from biomass-derived feedstocks such as glycerol or its derivatives. In this report, both DMC and glycidol were synthesized in an integrated process from glycerol derived 1,3-dichloro-2-propanol and CO2 through a metal-free reaction approach and at mild reaction conditions. Initially, the chlorinated cyclic carbonate, i.e., 3-chloro-1,2-propylenecarbonate was synthesized using the equivalent interaction of organic superbase 1,8-diazabicyclo [5.4.0] undec-7-ene (DBU) and 1,3-dichloro-2-propanol with CO2 at room temperature. Further, DMC and glycidol were synthesized by the base-catalyzed transesterification of 3-chloro-1,2-propylenecarbonate using DBU in methanol. The synthesis of 3-chloro-1,2-propylenecarbonate was performed in different solvents such as dimethyl sulfoxide (DMSO) and 2-methyltetrahydrofuran (2-Me-THF). In this case, 2-Me-THF further facilitated an easy separation of the product where a 97% recovery of the 3-chloro-1,2-propylenecarbonate was obtained compared to 63% with DMSO. The use of DBU as the base in the transformation of 3-chloro-1,2-propylenecarbonate further facilitates the conversion of the 3-chloro-1,2 propandiol that forms in situ during the transesterification process. Hence, in this synthetic approach, DBU not only eased the CO2 capture and served as a base catalyst in the transesterification process, but it also performed as a reservoir for chloride ions, which further facilitates the synthesis of 3-chloro-1,2-propylenecarbonate and glycidol in the overall process. The separation of the reaction components proceeded through the solvent extraction technique where a 93 and 89% recovery of the DMC and glycidol, respectively, were obtained. The DBU superbase was recovered from its chlorinated salt, [DBUH][Cl], via a neutralization technique. The progress of the reactions as well as the purity of the recovered chemical species was confirmed by means of the NMR analysis technique. Hence, a single base, as well as a renewable solvent comprising an integrated process approach was carried out under mild reaction conditions where CO2 sequestration along with industrially important chemicals such as dimethyl carbonate and glycidol were synthesized.

Performing under pressure: esterification activity of dry fermented solids in subcritical and supercritical CO2

OBJECTIVE

Lipases are often used in immobilized form, but commercial immobilized lipases are costly. An alternative is to produce lipases in solid-state fermentation, dry the solids and then use the "dry fermented solids" (DFS) directly. We produced DFS by growing Burkholderia contaminans on a mixture of sugarcane bagasse and sunflower seed meal and used the DFS to esterify oleic acid with ethanol in subcritical and supercritical CO₂ at 40 °C.

RESULTS

Compared to a control without CO₂ at atmospheric pressure, subcritical CO₂ at 30 bar improved esterification activity 1.2-fold. Higher pressures, including supercritical pressures up to 150 bar, reduced activity to less than 80% of the control. At 30 bar, the esterification activity was improved a further 1.8-fold with the addition of 9% water (i.e. 9 g water per 100 g oleic acid) to the reaction medium.

CONCLUSION

A subcritical CO₂ atmosphere, with the addition of a small amount of water, improved the esterification activity of DFS containing lipases of Burkholderia contaminans.

Biocatalyzed Redox Processes Employing Green Reaction Media

The application of biocatalysts to perform reductive/oxidative chemical processes has attracted great interest in recent years, due to their environmentally friendly conditions combined with high selectivities. In some circumstances, the aqueous buffer medium normally employed in biocatalytic procedures is not the best option to develop these processes, due to solubility and/or inhibition issues, requiring biocatalyzed redox procedures to circumvent these drawbacks, by developing novel green non-conventional media, including the use of biobased solvents, reactions conducted in neat conditions and the application of neoteric solvents such as deep eutectic solvents.

Impact and relevance of alcohol dehydrogenase enantioselectivities on biotechnological applications

Alcohol dehydrogenases (ADHs) catalyze the reversible reduction of a carbonyl group to its corresponding alcohol. ADHs are widely employed for organic synthesis due to their lack of harm to the environment, broad substrate acceptance, and high enantioselectivity. This review focuses on the impact and relevance of ADH enantioselectivities on their biotechnological application. Stereoselective ADHs are beneficial to reduce challenging ketones such as ketones owning two bulky substituents or similar-sized substituents to the carbonyl carbon. Meanwhile, in cascade reactions, non-stereoselective ADHs can be utilized for the quantitative oxidation of racemic alcohol to ketone and dynamic kinetic resolution.

Chemical Composition, Antioxidant, and Antimicrobial Activities of Vetiveria zizanioides (L.) Nash Essential Oil Extracted by Carbon Dioxide Expanded Ethanol

In the present study, the composition of essential oil isolated from the roots of Vetiveria zizanioides (L.) Nash, harvested in China, was studied, along with the bioactivities. A green novel method using an eco-friendly solvent, CO₂-pressurized ethanol, or carbon dioxide expanded ethanol (CXE) was employed to isolate the essential oil from the root of Vetiveria zizanioides (L.) Nash with the purpose of replacing the traditional method and supercritical fluid extraction (SFE). After investigating the major operating factors of CXE, the optimal conditions were obtained as follows: 8.4 MPa, 50 °C, 5 mL/min ethanol, and 0.22 mole fraction of CO₂, presenting an extraction oil that ranged from 5.12% to 7.42%, higher than that of hydrodistillation (HD) or indirect vapor distillation (IVD). The Gas Chromatography-Mass Spectrometry (GC-MS) analysis showed that three major components, including valerenol (18.48%), valerenal (10.21%), and β-Cadinene (6.23%), are found in CXE oil, while a total of 23 components were identified, 48 components less than using conventional hydrodistillation. Furthermore, the antimicrobial activities of root oils were evaluated by the microdilution method, which showed that CXE oil exhibited an ability against Gram-positive bacteria, especially Staphylococcus aureus, approximately equivalent to traditional samples. Additionally, the DPPH free radical scavenging assay demonstrated that the antioxidant abilities of root oils were sorted in the descending order: IVD > HD > CXE > SFE. In conclusion, after a comprehensive comparison with the conventional methods, the CXE-related technique might be a promising green manufacturing pattern for the production of quality vetiver oil, due to the modification of ethanol by the variable addition of non-polar compressible CO₂, ultimately resulting in a prominent dissolving capability for the extraction of vetiver solutes.

Novozym 435: the “perfect” lipase immobilized biocatalyst?

Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes with its advantages and drawbacks.

Synthetically useful variants of industrial lipases from Burkholderia cepacia and Pseudomonas fluorescens

Industrial enzymes lipase PS (LPS) and lipase AK (LAK), which originate from Burkholderia cepacia and Pseudomonas fluorescens, respectively, are synthetically useful biocatalysts. To strengthen their catalytic performances, we introduced two mutations into hot spots of the active sites (residues 287 and 290). The LPS_L287F/I290A double mutant showed high catalytic activity and enantioselectivity for poor substrates for which the wild-type enzyme showed very low activity. The LAK_V287F/I290A double mutant was also an excellent biocatalyst with expanded substrate scope, which was comparable to the LPS_L287F/I290A double mutant. Thermodynamic parameters were determined to address the origin of the high enantioselectivity of the double mutant. The ΔΔH^‡ term, but not the ΔΔS^‡ term, was predominant, which suggests that the enantioselectivity is driven by a differential energy associated with intermolecular interactions around Phe287 and Ala290. A remarkable solvent effect was observed, giving a bell-shaped profile between the E values and the log P or ε values of solvents with the highest E value in i-Pr₂O. This suggests that an organic solvent with appropriate hydrophobicity and polarity provides the double mutant with some flexibility that is essential for excellent catalytic performance.