A novel naphthalimide–glutathione chemosensor for fluorescent detection of Fe3+ and Hg2+ in aqueous medium and its application

Synthesis of organic-solvent-soluble cellulose and preparation of fluorescent polyurethanes for the detection and removal of Hg+ ions

Modifying cellulose to obtain materials with favorable processing properties and functions is highly significant, especially, for the detection and removal of heavy metal ions. In this study, fluorescent cellulose-based polyurethane (PU) films containing naphthalimide fluorophore were synthesized and could use for the convenient detection and removal of Hg+ ions. Firstly, the microcrystalline cellulose was treated with SOCl2 to convert some -OH groups into -Cl. Simultaneously, a naphthalimide derivative (NAN) with -NH- groups was synthesized. Subsequently, a fluorescent cellulose-based probe (Cel-NAN) was prepared by utilizing the substitution reaction between -Cl on cellulose and -NH- on NAN. Finally, two cellulose-based fluorescent PU films (Cel-NAN-PU1 and Cel-NAN-PU2) were successfully synthesized by reacting the unreacted -OH groups on Cel-NAN with PEG-1000 and HDI/IPDI. These as-prepared PU films could serve as portable fluorescence test papers to Hg+ ions in aqueous solutions. Upon contact with Hg+ ions, the fluorescence was quenched, acting as a "turn-off" probe. Simultaneously, these films could serve as adsorbents for the removal of Hg+ ions from aqueous systems. Cel-NAN-PU1 film exhibited a removal efficiency over 80 % and an adsorption capacity of 8.4 mg·cm-2 for Hg+. These cellulose-based fluorescent PU films possess promising potential in the field of mercury pollution control.

A reasonably constructed fluorescent chemosensor based on the dicyanoisophorone skeleton for the discriminative sensing of Fe3+ and Hg2+ as well as imaging in HeLa cells and zebrafish

In this study, a new fluorescent sensor dicyanoisophorone Rhodanine-3-acetic acid (DCI-RDA) (DCI-RDA) has been developed by employing a DCI-based push–pull dye as the fluorophore and RDA as the recognition moiety for the simultaneous sensing of Fe³⁺ and Hg²⁺ with a large Stokes Shift (162 nm), high selectivity and sensitivity, and low LOD (1.468 μM for Fe³⁺ and 0.305 μM for Hg²⁺). In particular, DCI-RDA has a short response time (30 s). The Job's plot method in combination with ¹H NMR titration and theoretical calculations was used to determine the stoichiometry of both DCI-RDA-Fe³⁺/Hg²⁺ complexes to be 1 : 1. Moreover, DCI-RDA is applied as a fluorescent probe for imaging in HeLa cells and zebrafish, indicating that it can be potentially applied for Fe³⁺/Hg²⁺ sensing in the field of biology.

A new fluorescent sensor dicyanoisophorone rhodanine-3-acetic acid has been developed by employing a DCI-based push–pull dye as the fluorophore and RDA as the recognition moiety for the simultaneous sensing of Fe³⁺ and Hg²⁺.

Aggregation-induced emission (AIE) from poly(1,4-dihydropyridine)s synthesized by Hantzsch polymerization and their specific detection of Fe2+ ions

As an important metal element widely existing in nature and the human body, the simple and specific detection of Fe2+ ions has always been of interest.

Experimental and theoretical study of novel aminobenzamide–aminonaphthalimide fluorescent dyads with a FRET mechanism

In this work, both experimental and theoretical methods were used to study the photophysical and metal ion binding properties of a series of new aminobenzamide–aminonaphthalimide (2ABZ–ANAPIM) fluorescent dyads. The 2-aminobenzamide (2ABZ) and 6-aminonaphthalimide (ANAPIM) fluorophores were linked through alkyl chains (C₂ to C₆) to obtain four fluorescent dyads. These dyads present a highly efficient (0.61 to 0.98) Förster Resonant Energy Transfer (FRET) from the 2ABZ to the ANAPIM due to the 2ABZ emission and ANAPIM excitation band overlap and the configurational stacking of both aromatic systems which allows the energy transfer. These dyads interact with Cu²⁺ and Hg²⁺ metal ions in solution inhibiting the FRET mechanism by the cooperative coordination of both 2ABZ and ANAPIM moieties. Both experimental and theoretical results are consistent and describe clearly the photophysical and coordination properties of these new dyads.

The aminobenzamide–aminonaphthalimide fluorescent dyads allow the determination of Cu²⁺ and Hg²⁺ metal ion concentration from Förster Resonant Energy Transfer measurements.

A novel fluorometric chemosensor based on imidazo[4,5-b]phenazine-2-thione for ultrasensitive detection and separation of Hg2+ in aqueous solution

We synthesized and developed 1,3-dihydro-2H-imidazo[4,5-b]phenazine-2-thione as a ratiometric chemosensor for Hg2+ recognition in a DMSO/H2O (v/v = 9:1) binary solution. We rationally introduced the phenazine imidazole group as the fluorophore and the thione moiety as the recognition site to bind Hg2+. Interestingly, the chemosensor showed an ultrasensitive response to Hg2+, and the lowest limit of detection was 0.167 nM. In addition, it can also separate Hg2+ from aqueous solutions with excellent ingestion capacity, with an adsorption ratio of up to 96%. Furthermore, ion test strips based on chemosensors were fabricated for convenient and efficient detection of Hg2+.

Novel Amino-pillar[5]arene as a Fluorescent Probe for Highly Selective Detection of Au3+ Ions

A novel fluorescent probe, amino-pillar[5]arene (APA), was prepared via a green, effective, and convenient synthetic method, which was characterized by nuclear magnetic resonance (NMR), infrared (IR), and high-resolution mass spectrometry. The fluorescence sensing behavior of the APA probe toward 22 metal ions in aqueous solutions were studied by fluorescence spectroscopy. The results showed that APA could be used as a selective fluorescent probe for the specificity detection of Au3+ ions. Moreover, the detection characteristics were investigated by fluorescence spectral titration, pH effect, fluorescence competitive experiments, Job's plot analysis, 1H NMR, and IR. The results indicated that detection of Au3+ ions by the APA probe could be achieved in the range of pH 1-13.5 and that other coexisting metal ions did not cause any marked interference. The titration analysis results indicated that the fluorescence intensity decreased as the concentration of Au3+ ions increased, with an excellent correlation (R 2 = 0.9942). The detection limit was as low as 7.59 × 10-8 mol·L-1, and the binding ratio of the APA probe with Au3+ ions was 2:1. Therefore, the APA probe has potential applications for detecting Au3+ ions in the environment and in living organisms.

A benzothiazole-rhodol based luminophor: ESIPT-induced AIE and an application for detecting Fe2+ ion

Herein, we designed and synthesized a luminophor, Rh-F, which is an intergrant of rhodol and 2-hydroxy benzothiazole by introducing a benzothiazole unit onto the ortho-position of the phenolic hydroxy of rhodol. Rh-F exhibited excellent fluorescence properties such as a large Stokes shift (>180 nm) and the synergistic effect of aggregation-induced emission (AIE) and an excited state intramolecular proton transfer (ESIPT) feature. The AIE/ESIPT mechanism was thoroughly explored using X-ray single-crystal structures and photophysical determinations. Furthermore, Rh-F showed a sensitive fluorescence response to Fe²⁺ with low detection limits of 115.2 nM and high selectivity. Studies of its sensing mechanism indicated that the Fe²⁺-induced blue-green fluorescence-quenched at 525 nm originates from an irreversible Fe²⁺ chelate with the oxygen atom of the hydroxyl group and the N atom of the benzothiazole moiety. This blocked the ESIPT process of Rh-F which resulted in the quenching of the fluorescence sensor for Rh-F.

Interaction of graphene oxide with bovine serum albumin: A fluorescence quenching study

Fluorescence quenching was used to elucidate the binding interaction mechanism between bovine serum albumin (BSA) and graphene oxide (GO). By analyzing the values of Stern-Volmer quenching constant (K_SV) and binding constant (K_A) which were affected by temperature, we supposed that the quenching process between GO and BSA was mainly determined by static quenching, combined with dynamic quenching. The study of thermodynamics showed that the values of enthalpy change (∆H), entropy change (∆S) and Free Energy (∆G) were all negative, which implied that the weak interaction of the molecular between BSA and GO was Van der Waals interaction or hydrogen bond, and the quenching process was exothermic and spontaneous. The red shift in the synchronous fluorescence spectra suggested that the conformation of tryptophan was changed in the presence of GO. According to Förster's non-radiative energy transfer theory, the distance r between BSA (donor) and GO (acceptor) was calculated and indicated the occurrence of energy transfer from BSA to GO had high probability. The AFM observation and Raman spectroscopy revealed that the interaction between BSA and GO has occurred. Compared with other literatures, the explosion of surface topography about BSA and GO was paid more attention on in this study.