What to sacrifice? Fusions of cofactor regenerating enzymes with Baeyer-Villiger monooxygenases and alcohol dehydrogenases for self-sufficient redox biocatalysis

Combination of Enzymes and Deep Eutectic Solvents as Powerful Toolbox for Organic Synthesis

During the last decade, a wide spectrum of applications and advantages in the use of deep eutectic solvents for promoting organic reactions has been well established among the scientific community. Among these synthetic methodologies, in recent years, various examples of biocatalyzed processes have been reported, making use of eutectic mixtures as reaction media, as an improvement in terms of selectivity and sustainability. This review aims to show the newly reported protocols in the field, subdivided by reaction class as a 'toolbox' guide for organic synthesis.

Expression and Characterization of Monomeric Recombinant Isocitrate Dehydrogenases from Corynebacterium glutamicum and Azotobacter vinelandii for NADPH Regeneration

The enzymatic transformation of various chemicals, especially using NADPH-dependent hydroxylase, into more soluble and/or high value-added products has steadily garnered increasing attention. However, the industrial application of these NADPH-dependent hydroxylases has been limited due to the high cost of the cofactor NADPH. As an alternative, enzymatic NADPH-regeneration systems have been developed and are frequently used in various fields. Here, we expressed and compared two recombinant isocitrate dehydrogenases (IDHs) from Corynebacterium glutamicum and Azotobacter vinelandii in Escherichia coli. Both enzymes were hyper-expressed in the soluble fraction of E. coli and were single-step purified to apparent homogeneity with yields of more than 850 mg/L. These enzymes also functioned well when paired with NADPH consumption systems. Specifically, NADPH was regenerated from NADP+ when an NADPH-consuming cytochrome P450 BM3 from Bacillus megaterium was incorporated. Therefore, both enzymes could be used as alternatives to the commonly used regeneration system for NADPH. These enzymes also have promising potential as genetic fusion partners with NADPH-dependent enzymes due to the monomeric nature of their quaternary structure, thereby resulting in self-sufficient biocatalysts via NADPH regeneration in a single polypeptide with NADPH-dependent activity.

Design of fusion enzymes for biocatalytic applications in aqueous and non-aqueous media

Biocatalytic cascades play a fundamental role in sustainable chemical synthesis. Fusion enzymes are one of the powerful toolboxes to enable the tailored combination of multiple enzymes for efficient cooperative cascades. Especially, this approach offers a substantial potential for the practical application of cofactor-dependent oxidoreductases by forming cofactor self-sufficient cascades. Adequate cofactor recycling while keeping the oxidized/reduced cofactor in a confined microenvironment benefits from the fusion fashion and makes the use of oxidoreductases in harsh non-aqueous media practical. In this mini-review, we have summarized the application of various fusion enzymes in aqueous and non-aqueous media with a focus on the discussion of linker design within oxidoreductases. The design and properties of the reported linkers have been reviewed in detail. Besides, the substrate loadings in these studies have been listed to showcase one of the key limitations (low solubility of hydrophobic substrates) of aqueous biocatalysis when it comes to efficiency and economic feasibility. Therefore, a straightforward strategy of applying non-aqueous media has been briefly discussed while the potential of using the fusion oxidoreductase of interest in organic media was highlighted.

Design and biocatalytic applications of genetically fused multifunctional enzymes

Fusion proteins, understood as those created by joining two or more genes that originally encoded independent proteins, have numerous applications in biotechnology, from analytical methods to metabolic engineering. The use of fusion enzymes in biocatalysis may be even more interesting due to the physical connection of enzymes catalyzing successive reactions into covalently linked complexes. The proximity of the active sites of two enzymes in multi-enzyme complexes can make a significant contribution to the catalytic efficiency of the reaction. However, the physical proximity of the active sites does not guarantee this result. Other aspects, such as the nature and length of the linker used for the fusion or the order in which the enzymes are fused, must be considered and optimized to achieve the expected increase in catalytic efficiency. In this review, we will relate the new advances in the design, creation, and use of fused enzymes with those achieved in biocatalysis over the past 20 years. Thus, we will discuss some examples of genetically fused enzymes and their application in carbon‑carbon bond formation and oxidative reactions, generation of chiral amines, synthesis of carbohydrates, biodegradation of plant biomass and plastics, and in the preparation of other high-value products.

Design of Artificial Enzymes Bearing Several Active Centers: New Trends, Opportunities and Problems

Harnessing enzymes which possess several catalytic activities is a topic where intense research has been carried out, mainly coupled with the development of cascade reactions. This review tries to cover the different possibilities to reach this goal: enzymes with promiscuous activities, fusion enzymes, enzymes + metal catalysts (including metal nanoparticles or site-directed attached organometallic catalyst), enzymes bearing non-canonical amino acids + metal catalysts, design of enzymes bearing a second biological but artificial active center (plurizymes) by coupling enzyme modelling and directed mutagenesis and plurizymes that have been site directed modified in both or in just one active center with an irreversible inhibitor attached to an organometallic catalyst. Some examples of cascade reactions catalyzed by the enzymes bearing several catalytic activities are also described. Finally, some foreseen problems of the use of these multi-activity enzymes are described (mainly related to the balance of the catalytic activities, necessary in many instances, or the different operational stabilities of the different catalytic activities). The design of new multi-activity enzymes (e.g., plurizymes or modified plurizymes) seems to be a topic with unarguable interest, as this may link biological and non-biological activities to establish new combo-catalysis routes.

Protein scaffolds: A tool for multi-enzyme assembly

The synthesis of complex molecules using multiple enzymes simultaneously in one reaction vessel has rapidly emerged as a new frontier in the field of bioprocess technology. However, operating different enzymes together in a single vessel limits their operational performance which needs to be addressed. With this respect, scaffolding proteins play an immense role in bringing different enzymes together in a specific manner. The scaffolding improves the catalytic performance, enzyme stability and provides an optimal micro-environment for biochemical reactions. This review describes the components of protein scaffolds, different ways of constructing a protein scaffold-based multi-enzyme complex, and their effects on enzyme kinetics. Moreover, different conjugation strategies viz; dockerin-cohesin interaction, SpyTag-SpyCatcher system, peptide linker-based ligation, affibody, and sortase-mediated ligation are discussed in detail. Various analytical and characterization tools that have enabled the development of these scaffolding strategies are also reviewed. Such mega-enzyme complexes promise wider applications in the field of biotechnology and bioengineering.

Genetic fusion of P450 BM3 and formate dehydrogenase towards self-sufficient biocatalysts with enhanced activity

Fusion of multiple enzymes to multifunctional constructs has been recognized as a viable strategy to improve enzymatic properties at various levels such as stability, activity and handling. In this study, the genes coding for cytochrome P450 BM3 from B. megaterium and formate dehydrogenase from Pseudomonas sp. were fused to enable both substrate oxidation catalyzed by P450 BM3 and continuous cofactor regeneration by formate dehydrogenase within one construct. The order of the genes in the fusion as well as the linkers that bridge the enzymes were varied. The resulting constructs were compared to individual enzymes regarding substrate conversion, stability and kinetic parameters to examine whether fusion led to any substantial improvements of enzymatic properties. Most noticeably, an activity increase of up to threefold was observed for the fusion constructs with various substrates which were partly attributed to the increased diflavin reductase activity of the P450 BM3. We suggest that P450 BM3 undergoes conformational changes upon fusion which resulted in altered properties, however, no NADPH channeling was detected for the fusion constructs.

Use of Flavin-Containing Monooxygenases for Conversion of Trimethylamine in Salmon Protein Hydrolysates

Enzyme-based conversion of marine biomass to high-quality peptide ingredients leaves a distinct smell of “fish” caused by the presence of trimethylamine, which limits their economic potential. We suggest an enzymatic solution for converting trimethylamine to the odorless trimethylamine N-oxide as a novel strategy to improve the smell quality of marine protein hydrolysates. Following a systematic investigation of 45 putative bacterial trimethylamine monooxygenases from several phyla, we expand the repertoire of known active trimethylamine monooxygenases. As a proof-of-concept, we demonstrate that three of these enzymes oxidized trimethylamine in an industry-relevant salmon protein hydrolysate. Our results add new oxidoreductases to the industrial biocatalytic toolbox and provide a new point of departure for enzyme process developments in marine biorefineries.

Enzymatic processing of fish by-products for recovery of peptides (hydrolysates) is a promising technology to reach food grade ingredients of high nutritional quality. Despite this, their bitter taste and “fish” odor block implementation in food products and limit their economic potential. Trimethylamine (TMA) is a known contributor to malodor in fish. Current strategies to mask or remove the odor either are not effective or give rise to undesirable side effects. As an alternative approach to remediate TMA, we propose a novel enzymatic strategy to convert TMA into the odorless trimethylamine N-oxide (TMAO) using TMA monooxygenases (Tmms). We identified a diverse set of bacterial Tmms using a sequence similarity network. Purified, recombinant enzymes were assessed for their biocatalytic capacity by monitoring NADPH consumption and TMAO generation. Selected Tmms were subjected to biochemical characterization and investigated for their ability to oxidize TMA in an industry-relevant substrate. From the 45 bacterial Tmm candidates investigated, eight enzymes from four different taxa were selected for their high activity toward TMA. The three most active enzymes were shown to vary in temperature optimum, with the highest being 45°C. Enzymatic activity dropped at high temperatures, likely due to structural unfolding. The enzymes were all active from pH 6.0 to 8.5, with functional stability being lowest around the optimal pH. All three Tmms, given sufficient NADPH cofactor, were found to generate TMAO in the TMA-rich salmon protein hydrolysate. The Tmms serve as unique starting points for engineering and should be useful for guiding process development for marine biorefineries.

IMPORTANCE Enzyme-based conversion of marine biomass to high-quality peptide ingredients leaves a distinct smell of “fish” caused by the presence of trimethylamine, which limits their economic potential. We suggest an enzymatic solution for converting trimethylamine to the odorless trimethylamine N-oxide as a novel strategy to improve the smell quality of marine protein hydrolysates. Following a systematic investigation of 45 putative bacterial trimethylamine monooxygenases from several phyla, we expand the repertoire of known active trimethylamine monooxygenases. As a proof-of-concept, we demonstrate that three of these enzymes oxidized trimethylamine in an industry-relevant salmon protein hydrolysate. Our results add new oxidoreductases to the industrial biocatalytic toolbox and provide a new point of departure for enzyme process developments in marine biorefineries.

Optimizing the linker length for fusing an alcohol dehydrogenase with a cyclohexanone monooxygenase

The use of enzymes in organic synthesis is highly appealing due their remarkably high chemo-, regio- and enantioselectivity. Nevertheless, for biosynthetic routes to be industrially useful, the enzymes must fulfill several requirements. Particularly, in case of cofactor-dependent enzymes self-sufficient systems are highly valuable. This can be achieved by fusing enzymes with complementary cofactor dependency. Such bifunctional enzymes are also relatively easy to handle, may enhance stability, and promote product intermediate channeling. However, usually the characteristics of the linker, fusing the target enzymes, are not thoroughly evaluated. A poor linker design can lead to detrimental effects on expression levels, enzyme stability and/or enzyme performance. In this chapter, the effect of the length of a glycine-rich linker was explored for the case study of ɛ-caprolactone synthesis through an alcohol dehydrogenase-cyclohexanone monooxygenase fusion system. The procedure includes cloning of linker variants, expression analysis, determination of thermostability and effect on activity and conversion levels of 15 variants of different linker sizes. The protocols can also be used for the creation of other protein-protein fusions.

Temperature-Independent Kinetic Isotope Effects as Evidence for a Marcus-like Model of Hydride Tunneling in Phosphite Dehydrogenase

Phosphite dehydrogenase catalyzes the transfer of a hydride from phosphite to NAD⁺, producing phosphate and NADH. We have evaluated the role of hydride tunneling in a thermostable variant of this enzyme (17X-PTDH) by measuring the temperature dependence of the primary ²H kinetic isotope effects (KIEs) between 5 and 45 °C. Pre-steady-state kinetic measurements were used to demonstrate that the hydride transfer is rate-determining across this temperature range and that the observed KIEs are equal to the intrinsic isotope effect on the chemical step. The KIEs on the pre-exponential factor (A_H/A_D) and the activation energy (ΔE_a) were 1.6 ± 0.1 and 0.21 ± 0.05 kcal/mol, respectively, suggesting that 17X-PTDH facilitates extensive tunneling of both isotopes via a Marcus-like model. Site-directed mutagenesis was used to evaluate the role of an active site threonine (Thr104) found on the back face of the nicotinamide in promoting the close packing of the substrates. In mutants with reduced steric bulk at this position, values of A_H/A_D and ΔE_a fall within the range describing semiclassical "over the barrier" reactivity, suggesting that Thr104 acts as a steric backstop to promote tunneling in 17X-PTDH. Whereas hydrogen tunneling is now a widely appreciated feature of C-H activating enzymes, these observations with a P-H activating system are consistent with the proposal that tunneling is likely to be a common feature on all enzymes that catalyze hydrogen transfers.

Stabilization of cyclohexanone monooxygenase by computational and experimental library design

Enzymes often by far exceed the activity, selectivity, and sustainability achieved with chemical catalysts. One of the main reasons for the lack of biocatalysis in the chemical industry is the poor stability exhibited by many enzymes when exposed to process conditions. This dilemma is exemplified in the usually very temperature‐sensitive enzymes catalyzing the Baeyer–Villiger reaction, which display excellent stereo‐ and regioselectivity and offer a green alternative to the commonly used, explosive peracids. Here we describe a protein engineering approach applied to cyclohexanone monooxygenase from Rhodococcus sp. HI‐31, a substrate‐promiscuous enzyme that efficiently catalyzes the production of the nylon‐6 precursor ε‐caprolactone. We used a framework for rapid enzyme stabilization by computational libraries (FRESCO), which predicts protein‐stabilizing mutations. From 128 screened point mutants, approximately half had a stabilizing effect, albeit mostly to a small degree. To overcome incompatibility effects observed upon combining the best hits, an easy shuffled library design strategy was devised. The most stable and highly active mutant displayed an increase in unfolding temperature of 13°C and an approximately 33x increase in half‐life at 30°C. In contrast to the wild‐type enzyme, this thermostable 8x mutant is an attractive biocatalyst for biotechnological applications.