A chiral (S)-BINOL based fluorescent sensor for the recognition of Fe(III) and cascade discrimination of α-amino acids

Self-assembled nanovesicles based on chiral bis-H8-BINOL for Fe3+ recognition and secondary recognition of l-cysteine by 1 + 1 complex

A novel fluorescent "off" sensor, R-β-d-1, was obtained in high yield (91.2%) by using octahydronaphthol as a backbone, introducing an alkyne group at the 2-position, and linking azido-glucose via a click reaction. The sensor was analyzed by scanning electron microscopy and transmission electron microscopy and was found to be a self-assembled vesicle. AFM results showed that the fluorescence burst was extinguished by the addition of Fe3+, and the fluorescence was restored by the addition of cysteine. This is due to charge transfer within the molecular structure, resulting in the ICT effect and phototransfer of electrons (PET), as well as redshifting (from 331 nm to 351 nm) and quenching of the fluorescence. The self-assembled vesicles of the fluorescent sensor R-β-d-1 encapsulated Fe3+, but upon addition of cysteine, the vesicles of R-β-d-1-Fe3+ were also complexed with it, forming the R-β-d-1-Fe3+-l-Cys complex, at which point fluorescence gradually returned. Therefore, the fluorescence test of this probe showed that the lowest detection limit of iron ions was 1.67 × 10-7 mol L-1, and its complexation mode was in the form of 1 + 1. The novel probe formed by R-β-d-1-Fe3+ can be used for the fluorescence detection of cysteine.

13-8-13-Membered Tricyclic Ladder-Type Siloxanes Hybridized with BINOLs: Synthesis, Characterization, and Fluorescence Sensing of Fluorides

Developing fluorescent chemosensors with sensitivity and high specificity for recognizing fluorides is still challenging. Herein, four innovative compounds based on 13-8-13-membered tricyclic ladder-type siloxanes hybridized with BINOLs (abbreviated as TLS-BINOLs) were prepared through the B(C6F5)3-catalyzed Piers-Rubinsztajn reaction. The well-defined ladder-type structure of the TLS-BINOLs was determined by X-ray crystallographic analysis. Additionally, the fluorescent sensing ability of the TLS-BINOLs toward anions was studied. Our finding revealed that all four ladder-type compounds (TLS-BINOLs) exhibited high specificity in recognizing fluorides through fluoride-triggered structural decomposition. The detection limits for fluorides were determined to be 0.37, 0.35, 0.39, and 0.48 μM for the respective TLS-BINOLs. The nonemissive product induced by the fluorides was also determined using single-crystal X-ray diffraction analysis.

Chiral Binaphthol Fluorescent Materials Based on a Novel Click Reaction

Because of easy functionalization, low cost, and large-scale fabrication, pure organic fluorescent polymers are widely applied in light-emitting display, bio-fluorescence-enhanced imaging, explosive detection, and other fields. Among these applications, due to their unique optical rotation characteristics, chiral fluorescent polymer materials are part of fluorescent polymers which could be used in chiral molecular detection and separation, biological target detection, etc. In this work, we designed and synthesized the first chiral organic fluorescent polysulfate materials through sulfur fluoride exchange polymerization (new click chemistry) by asymmetric binaphthol molecular. The chiral fluorescent polysulfate were synthesized by R/S [1,1′-binaphthalene]-2,2′-diol(Binol.), propane-2,2-diylbis(4,1-phenylene) bis(sulfurofluoridate) (FO2S–BA–SO2F) and 4,4′-(propane-2,2-diyl)diphenol(BA.) through step-by-step polymerization reaction under alkali present. It was found that the local crystallization of pure bisphenol A polysulfate was broken by the asymmetric axial chiral BINOL molecule inserted in it and let the polymer into the amorphous state. Fluorescent chiral molecules are uniformly dispersed in the polymer; the 120 µm film prepared by the film scraper was transparent and had good luminescence characteristics under ultraviolet light. After fluorescence detection, the excitation wavelength is 450 nm, and the emission wavelength is 480 and 517 nm.

A Highly Selective and Sensitive Colorimetric Chemosensor for the Detection of Hydrogen Sulfide: Real-time Applications in Multiple Platforms

Calorimetric chemosensors are found to be advantageous sensing systems due to their simplicity and favorable responsive properties. Although some colorimetric probes have been reported to detect hydrogen sulfide (H₂ S), the creation of rapid, highly selective, and sensitive probes for the detection of H₂ S remains a challenging target. In this work, we established dinitrosulphonamide decorated phenanthridine, 2,4-dinitro-N-(4-(7,8,13,14-tetrahydrodibenzo[a, i]phenanthridin-5-yl)phenyl)benzenesulfonamide (PHSH), for the calorimetric detection of H₂ S. H₂ S triggered thiolysis of PHSH resulted in a marked absorption enhancement alongside a visual color change from colorless to dark yellow. The result indicated that the chemosensor showed high sensitivity and selectivity with a fast response of less than 10 s with a detection limit as low as 6.5 nM. The chemosensor reaction mechanism with H₂ S was studied by UV-vis, ¹ H NMR, mass and HPLC analysis. In addition, the chemosensor has been used for the determination of H₂ S in many real-time samples.

A novel Schiff base macrocycle based on 1,1'-binaphthyl for fluorescence recognition

A novel chiral polyimine macrocycle C-1 was designed and synthesized by the self-condensation of the dialdehyde of the chiral dinaphtho[2,1-d:1',2'-f][1,3]dioxepine derivative and o-phenylenediamine by Schiff base formation, and the corresponding polyamine macrocycle C-1H was obtained by the reduction of the polyimine macrocycle. The UV-vis and fluorescence spectral studies indicated that both C-1 and C-1H form the complex with metal ions in a 1:2 ratio. The fluorescence behaviour of C-1 upon the addition of Zn²⁺ or Cd²⁺ showed a 'turn-on' response accompanied by fluorescence enhancement at 510 nm six times for Cd²⁺ and 13 times for Zn²⁺ . In contrast, C-1H revealed a 'turn-off' response upon the addition of Co²⁺ , Ni²⁺ , and Cu²⁺ .

A sensitive and selective BINOL based ratiometric fluorescence sensor for the detection of cyanide ions

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻). The optical study revealed that BBCN exhibited unique spectral changes only with cyanide ions in the presence of other competing ions. Besides, an apparent fluorescent colour change from green to blue was observed. A clear linear relationship was observed between the fluorescence ratiometric ratio of BBCN and the concentration of CN⁻ with a reasonably low detection limit (LOD) of 189 nM (507 ppb). The optical response was due to the nucleophilic addition of CN⁻ to the dicyanovinyl group of the sensor, which compromises the probe's intramolecular charge transfer. This mechanism was well confirmed by Job's plot, ¹H-NMR and ESI-MS studies. BBCN showed immediate spectral response towards (1 second) CN⁻ and detection could be realized in a broad pH window. Furthermore, the practical utility of BBCN was studied by test paper-based analysis and the detection of CN⁻ in various water resources.

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻).

Recent advances of BINOL-based sensors for enantioselective fluorescence recognition

Enantioselective fluorescent sensors show large potential for fast, real-time, and highly sensitive measurement of the concentration and enantiomeric composition of chiral molecules. Among all of the sensors, BINOL-based sensors have been actively investigated and extensively used to carry out highly enantioselective, sensitive recognition of chiral α-hydroxycarboxylic acids, amino acids, amino acid derivatives, amino alcohols and amines. In this manuscript, the recent progress of chiral BINOL-based sensors for enantioselective fluorescence recognition of different substrates is reviewed and discussed. The structure of BINOL is tuned by introducing various groups or molecules which systematically changed its fluorescence properties and offered potential for rapid assays of chiral organic molecules. From the development of this area, we gain fresh insight into the challenges and chances of BINOL-based sensors.

Fused pyrazole-phenanthridine based dyads: synthesis, photo-physical and theoretical studies, and live cell pH imaging

The arrangement of small sized molecules with a scaffold structure plays an active role in the fields of sensors and health care. An efficient molecular design strategy for four pyrazole-phenanthridine based D-π-A luminophores, denoted as 2a, 2b, 2c and 2d was developed to investigate the effect of acid on the photo-physical properties of these dyes. Photo-physical studies of the synthesized probes showed distinct absorption and emission under various pH conditions. Theoretical calculations using density functional methods were carried out for understanding the mechanistic aspects of the proton induced fluorescence. The experimentally observed photo-physical properties correlated well with theoretical results. Moreover, probes 2 and 2a can be used to monitor the fluorescence changes in E. coli cells under different pH conditions.

Enantioselective recognition of carboxylic acids by novel fluorescent triazine-based thiazoles

Hydrogen bonding and π-π interactions take special part in the enantioselectivity task. In this regard, because of having both hydrogen acceptor and hydrogen donor groups, melamine derivatives become more of an issue for enantioselectivity. In the light of such information, triazine-based chiral, fluorescence active novel thiazole derivatives L1 and L2 were designed and synthesized from (S)-(-)-2-amino-1-butanol and (1S,2R)-(+)-2-amino-1,2-diphenylethanol. The structural establishment of these compounds was made by spectroscopic methods such as FTIR, ¹ H, and ¹³ C NMR. While the solution of these compounds in DMSO did not show any fluorescence emission, it was observed that the emission increased 44-fold for L1 and 55-fold for L2 in 95% water, similar to the aggregation-induced emission (AIE) characterized compounds. In this regard, enantioselective capabilities of these compounds against carboxylic acids were tested, and in experiments carried out at a ratio of 40/60 DMSO/H₂ O, it was determined that R-2ClMA increased the fluorescence emission of L1 chiral receptor by 2.59 times compared to S-isomer.