Molecular iodine-catalyzed one-pot synthesis of 4-substituted-1,4-dihydropyridine derivatives via Hantzsch reaction

Graphene oxide immobilized 2-morpholinoethanamine as a versatile acid-base catalyst for synthesis of some heterocyclic compounds and molecular docking study

In this study, a new heterogeneous catalyst was synthesized based on graphene oxide (GO) as a natural material. On the surface of nanosheet graphene oxide, 2-Morpholinoethanamine was immobilized using a non-toxic, green, and simple method. This resulted in the preparation of a bifunctional acid-base nanocatalyst. The synthesized composite was fully characterized using various methods, including Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS), mapping, Raman spectroscopy, X-ray diffractometry (XRD), thermogravimetric analysis (TGA), and CHN elemental analysis. The catalytic reactivity of GO-mor was investigated in the one-pot synthesis of some benzo[b]pyran, pyrano[3,2-c]chromene, and polyhydroquinoline derivatives, yielding good efficiency and short reaction times. In addition, several recent studies have shown that some derivatives of pyran, chromene, and quinoline have remarkable anti COVID activity. Particularly, COVID-19 3CLpro/Mpro is considered a potential target for the treatment of this virus. For this purpose, docking models were constructed using the corresponding crystal structures with the synthesized derivatives. Based on the docking score and similarity of the binding mode to remdesivir and elvitegravir (the only approved drugs for the treatment of COVID-19), A2, B1, and C4 were selected as promising candidates for further research.

Trimesic acid-functionalized chitosan: A novel and efficient multifunctional organocatalyst for green synthesis of polyhydroquinolines and acridinediones under mild conditions

Trimesic acid-functionalized chitosan (Cs/ECH-TMA) material was prepared through a simple procedure by using inexpensive and commercially available chitosan (Cs), epichlorohydrin (ECH) linker and trimesic acid (TMA). The obtained bio-based Cs/ECH-TMA material was characterized using energy-dispersive X-ray (EDX) and Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) analysis. The Cs/ECH-TMA material was successfully used, as a multifunctional heterogeneous and sustainable catalyst, for efficient and expeditious synthesis of medicinally important polyhydroquinoline (PHQ) and polyhydroacridinedione (PHA) scaffolds through the Hantzsch condensation in a one-pot reaction. Indeed, the heterogeneous Cs/ECH-TMA material can be considered as a synergistic multifunctional organocatalyst due to the presence of a large number of acidic active sites in its structure as well as hydrophilicity. Both PHQs and PHAs were synthesized in the presence of biodegradable heterogeneous Cs/ECH-TMA catalytic system from their corresponding substrates in EtOH under reflux conditions and high to quantitative yields. The Cs/ECH-TMA catalyst is recyclable and can be reused at least four times without significant loss of its catalytic activity.

Ultrasound-Promoted preparation and application of novel bifunctional core/shell Fe3O4@SiO2@PTS-APG as a robust catalyst in the expeditious synthesis of Hantzsch esters

In this work, D-(-)-α-phenylglycine (APG)-functionalized magnetic nanocatalyst (Fe₃O₄@SiO₂@PTS-APG) was designed and successfully prepared in order to implement the principles of green chemistry for the synthesis of polyhydroquinoline (PHQ) and 1,4-dihydropyridine (1,4-DHP) derivatives under ultrasonic irradiation in EtOH. After preparing of the nanocatalyst, its structure was confirmed by different spectroscopic methods or techniques including Fourier transform infrared (FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and thermal gravimetric analysis (TGA). The performance of Fe₃O₄@SiO₂@PTS-APG nanomaterial, as a heterogeneous catalyst for the Hantzsch condensation, was examined under ultrasonic irradiation and various conditions. The yield of products was controlled under various conditions to reach more than 84% in just 10 min, which indicates the high performance of the nanocatalyst along with the synergistic effect of ultrasonic irradiation. The structure of the products was identified by melting point as well as FTIR and ¹H NMR spectroscopic methods. The Fe₃O₄@SiO₂@PTS-APG nanocatalyst is easily prepared from commercially available, lower toxic and thermally stable precursors through a cost-effective, highly efficient and environmentally friendly procedure. The advantages of this method include simplicity of the operation, reaction under mild conditions, the use of an environmentally benign irradiation source, obtaining pure products with high efficiency in short reaction times without using a tedious path, which all of them address important green chemistry principles. Finally, a reasonable mechanism is proposed for the preparation of polyhydroquinoline (PHQ) and 1,4-dihydropyridine (1,4-DHP) derivatives in the presence of Fe₃O₄@SiO₂@PTS-APG bifunctional magnetic nanocatalyst.

Ammonium metavanadate (NH4VO3): a highly efficient and eco-friendly catalyst for one-pot synthesis of pyridines and 1,4-dihydropyridines

In this study, we reported the ammonium metavanadate (NH₄VO₃) as an efficient, cost-effective, and mild catalyst for the synthesis of substituted pyridines via a one-pot pseudo four-component reaction. Furthermore, we investigated Hantzsch 1,4-dihydropyridines (1,4-DHPs) synthesis and oxidation of 1,4-DHPs to their corresponding pyridines. The present approach offers a rapid methodology for accessing various pyridines with broad functional group tolerance and good yields using NH₄VO₃ catalyst as a green catalyst.

Synthesis, molecular docking and extensive structure activity relationship of substituted DHP derivatives: a new class of herbicides

In the present study, twenty-two derivatives of dihydropyridine (DHP) have been synthesized using the Boric acid catalyst in solventless conditions. The synthesis was confirmed by FTIR analysis, 1HNMR, and 13CNMR analysis. The quantitative structure-activity relationship for all the synthesized derivatives was performed using an artificial neural network with correlation coefficient (R²) 0.8611, mean standard error 0.19, and Comparative molecular field analysis (CoMFA) with correlation coefficient (R²) 0.713, mean standard error 0.27. The molecular docking activity of synthesized compounds was tested using "AUTODOCK VINA" against "Acetohydroxyacid synthase protein receptors (PDB code 1YHZ)" acquired from the "RCSB Protein Data Bank". Docking experiments demonstrated favorable interaction among synthesized DHP derivatives and protein receptors with significant binding energy values. These synthesized derivatives have been screened for their pre-emergence herbicidal bioassay against weed species Echinochola crus galli, and the IC50 value were calculated and activity was compared with Butachlor, significant activity was exhibited by all the derivatives. All the synthesized compounds were also screened for their post emergence herbicidal activity against Echinochola crus galli, and the activity of DHPs were compared with penoxulum. All the synthesized compounds show good to moderate activity. Thus, it is concluded that substituted DHP derivatives may be developed as potential herbicides.

Synthesis, delivery, and molecular docking of fused quinolines as inhibitor of Hepatitis A virus 3C proteinase

It is widely accepted that Hepatitis A virus (HAV) is responsible for liver failure and even death in older people and in people with other serious health issues; so, proposing new compounds with inhibitory activity can help to treated of these disease’s. In current study, a new class of quinolines is proposed with inhibitor activity of the HAV proteinase. So, in the first step, fused quinoline derivatives has been synthesized in short reaction time (12.0 min) and high efficiency yields (94%) in presence of 1-carboxymethyl-2,3-dimethylimidazolium iodide ([cmdmim]I) ionic liquid catalyst using a new method. In the following, chemical reactivity and inhibitory activity of synthesized quinolines were evaluated in density functional theory (DFT) framework and molecular docking methodologies. High global softness (0.67 eV), low HOMO_SWBNNT-LUMO_4a gap (4.78 eV), and more negative adsorption energy (− 87.9 kJ mol⁻¹) in these quinolines reveal that the 4a and 4b compounds have better delivery than other quinolines using SWBNNT as suitable carrier to target cells. Molecular docking shows that the best cavity of the HAV has − 134.2 kJ mol⁻¹ interaction energy involving bonding and non-bonding interactions. In fact, these interactions are between fused quinolines with especial geometries and sidechain flexibility amino acids residues inside the best binding site of the HAV, as hydrogen bonding, steric, and electrostatic interactions. So, these interactions imply that proposed fused quinolines have good inhibitor activity for the HAV.

Manganese-Mediated Direct Functionalization of Hantzsch Esters with Alkyl Iodides via an Aromatization-Dearomatization Strategy

We report, for the first time, manganese-mediated direct functionalization of the Hantzsch esters with readily accessible alkyl iodides through an aromatization-dearomatization strategy. Applying this protocol, a library of valuable 4-alkyl-1,4-dihydropyridines were facilely afforded in good yields. This simple and practical reaction proceeds under visible-light irradiation at room temperature and displays high functional-group compatibility. Additionally, the method is applicable for gram-scale synthesis and late-stage functionalization of complex molecules.

Mo@GAA-Fe3O4 MNPs: a highly efficient and environmentally friendly heterogeneous magnetic nanocatalyst for the synthesis of polyhydroquinoline derivatives

Polyhydroquinolines were efficiently obtained from a sequential four-component reaction between dimedone or 1,3-cyclohexandione, ethyl acetoacetate, or methyl acetoacetate as a β-ketoester, aldehydes, and ammonium acetate, under the catalysis of Mo@GAA-Fe3O4 MNPs as a green, effective, recyclable, and environmentally friendly nanocatalyst. Due to its magnetic nature the prepared catalyst can be easily separated from the reaction mixture by an external magnet and reused several times without significant changes in catalytic activity and reaction efficiency. The catalyst was characterized using energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM).

Intercepted-Knoevenagel condensation for the synthesis of unsymmetrical fused-tricyclic 4H-pyrans

4H-Pyrans (4H-Pys) and 1,4-dihydropyridines (1,4-DHPs) are important classes of heterocyclic scaffolds in medicinal chemistry. Herein, an indium(III)-catalyzed one-pot domino reaction for the synthesis of highly functionalized 4H-Pys, and a model of 1,4-DHP is reported. This alternative approach to the challenging Hantzsch 4-component reaction enables the synthesis of fused-tricyclic heterocycles, and the mechanistic studies underline the importance of an intercepted-Knoevenagel adduct to achieve higher chemoselectivity towards these types of unsymmetrical heterocycles.

MIL-101-SO3H metal–organic framework as a Brønsted acid catalyst in Hantzsch reaction: an efficient and sustainable methodology for one-pot synthesis of 1,4-dihydropyridine

A straightforward and efficient methodology for the synthesis of the medicinally important 1,4-dihydropyridines has been demonstrated using MIL-101-SO₃H metal–organic framework as a sustainable Brønsted acid catalyst.

Iodine-Catalyzed Isomerization of Dimethyl Muconate

cis,cis-Muconic acid is a platform bio-based chemical that can be upgraded to drop-in commodity and novel monomers. Among the possible drop-in products, dimethyl terephthalate can be synthesized via esterification, isomerization, Diels-Alder cycloaddition, and dehydrogenation. The isomerization of cis,cis-dimethyl muconate (ccDMM) to the trans,trans-form (ttDMM) can be catalyzed by iodine; however, studies have yet to address (i) the mechanism and reaction barriers unique to DMM, and (ii) the influence of solvent, potential for catalyst recycle, and recovery of high-purity ttDMM. To address this gap, we apply a joint computational and experimental approach to investigate iodine-catalyzed isomerization of DMM. Density functional theory calculations identified unique regiochemical considerations owing to the large number of halogen-diene coordination schemes. Both transition state theory and experiments estimate significant barrier reductions with photodissociated iodine. Solvent selection was critical for rapid kinetics, likely because of solvent complexation with iodine. Under select conditions, ttDMM yields of 95 % were achieved in <1 h with methanol, followed by high purity recovery (>98 %) with crystallization. Lastly, post-reaction iodine can be recovered and recycled with minimal loss of activity. Overall, these findings provide new insight into the mechanism and conditions necessary for DMM isomerization with iodine to advance the state-of-the-art for bio-based chemicals.