Palladium N-methylimidazolium supported complexes as efficient catalysts for the Heck reaction

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

A Computer Simulation Study of Thermal and Mechanical Properties of Poly(Ionic Liquid)s

Thermal and mechanical properties of poly(ionic liquid)s (PILs), an epoxidized ionic liquid-amine network, are studied via molecular dynamics simulations. The poly(ionic liquid)s are designed with two different ionic liquid monomers, 3-[2-(Oxiran-2-yl)ethyl]-1-{4-[(2-oxiran-2-yl)ethoxy]phenyl}imidazolium (EIM2) and 1-{4-[2-(Oxiran-2-yl)ethyl]phenyl}-3-{4-[2-(oxiran-2-yl)ethoxy]benzyl}imidazolium (EIM1), each of which is networked with tris(2-aminoethyl)amine, paired with different anions, bis(trifluoromethanesulfonyl)imide (TFSI⁻) and chloride (Cl⁻). We investigate how ionic liquid monomers with high ionic strength affect structures of the cross-linked polymer networks and their thermomechanical properties such as glass transition temperature (T_g) and elastic moduli, varying the degree of cross-linking. Strong electrostatic interactions between the cationic polymer backbone and anions build up their strong structures of which the strength depends on their molecular structures and anion size. As the anion size decreases from TFSI⁻ to Cl⁻, both T_g and elastic moduli of the PIL increase due to stronger electrostatic interactions present between their ionic moieties, making it favorable for the PIL to organize with stronger bindings. Compared to the EIM2 monomer, the EIM1 monomers and TFSI⁻ ions generate a PIL with higher T_g and elastic moduli. This attributes to the less flexible structure of the EIM1 monomer for the chain rotation, in which steric hindrance by ring moieties in the EIM1-based PIL enhances their structural rigidity. The π-π stacking structures between the rings are found to increase in EIM1-based PIL compared to the EIM2-based one, which becomes stronger with smaller Cl⁻ ion rather than TFSI⁻. The effect of the degree of the cross-linking on thermal and mechanical properties is also examined. As the degree of cross-linking decreases from 100% to 60%, T_g also decreases by a factor of 10–20%, where the difference among the given PILs becomes decreased with a lower degree of cross-linking. Both the Young’s (E) and shear (G) moduli of all the PILs decrease with degree of cross-linking, which the reduction is more significant for the PIL generated with EIM2 monomers. Transport properties of anions in PILs are also studied. Anions are almost immobilized globally with very small structural fluctuations, in which Cl⁻ presents lower diffusivity by a factor of ~2 compared to TFSI⁻ due to their stronger binding to the cationic polymer backbone.

Preparation of Metal-Immobilized Methacrylate-Based Monolithic Columns for Flow-Through Cross-Coupling Reactions

With the aim of developing efficient flow-through microreactors for high-throughput organic synthesis, in this work, microreactors were fabricated by chemically immobilizing palladium-, nickel-, iron-, and copper-based catalysts onto ligand-modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) [poly(GMA-co-EDMA)] monoliths, which were prepared inside a silicosteel tubing (10 cm long with an inner diameter of 1.0 mm) and modified with several ligands including 5-amino-1,10-phenanthroline (APHEN), iminodiacetic acid (IDA), and iminodimethyl phosphonic acid (IDP). The performance of the resulting microreactors in Suzuki-Miyaura cross-coupling reactions was evaluated, finding that the poly(GMA-co-EDMA) monolith chemically modified with 5-amino-1,10-phenanthroline as a binding site for the palladium catalyst provided an excellent flow-through performance, enabling highly efficient and rapid reactions with high product yields. Moreover, this monolithic microreactor maintained its good activity and efficiency during prolonged use.

Synthesis of Nanosheets Containing Uniformly Dispersed PdII Ions at an Aqueous/Aqueous Interface: Development of a Highly Active Nanosheet Catalyst for Mizoroki-Heck Reaction

A method was developed to synthesize a nanosheet at the interface of an aqueous layer of Pd^II ions and an aqueous layer of hydrophilic polymer bearing a metal coordination unit (HPMC). The nanosheet was synthesized through generation of an interface by the addition of an aqueous solution of Pd^II ions with a low specific gravity (1.03 g/cm³) to a dispersed aqueous solution of HPMC with a high specific gravity (1.50 g/cm³), resulting in rapid cross-linking at the interface. An electron probe microanalysis mapping image showed that the Pd^II ions were uniformly dispersed in the nanosheet. The nanosheet showed a high catalyst activity for the Mizoroki-Heck cross-coupling reaction with a turnover number (TON) and turnover frequency (TOF) greater than 3,333,333 and 138,889 h^-1, respectively. These are the greatest TON and TOF values reported for heterogeneous polymeric catalysts for the Mizoroki-Heck reaction.

Scope and limitation of propylene carbonate as a sustainable solvent in the Suzuki–Miyaura reaction

The Suzuki–Miyaura reaction is one of the most used transformations in drug research. Thus making this reaction more sustainable is of considerable current interest. Here we show that propylene carbonate (PC) can be used as a solvent for the Suzuki–Miyaura reaction. PC is one of the greenest solvents since it is synthesized under green conditions by the use of carbon dioxide in the air. All reactions proceeded well and good or excellent yields were observed for the biaryl products. Nonetheless in the case of pyridazinones, 2-hydroxypropyl- chain containing side-products were observed. Importantly, this fact allowed the isolation of several novel compounds which were generated under prominently green conditions.

The Suzuki–Miyaura reaction was carried out in propylene carbonate yielding an interesting side-product besides the biphenyl derivative.

A convenient, efficient and reusable N-heterocyclic carbene-palladium(ii) based catalyst supported on magnetite for Suzuki–Miyaura and Mizoroki–Heck cross-coupling reactions

In the present work, a new magnetic nanoparticle supported N-heterocyclic carbene-palladium(ii) (NO₂-NHC-Pd@Fe₃O₄) nanomagnetic catalyst was synthesized by a facile multistep synthesis under aerobic conditions.

Silaphenylmercuric triflate catalyzed reactions: synthesis of a solid-supported mercuric salt catalyst

Let it flow, let it flow: A procedure to generate the first solid-supported mercuric salt, silaphenylmercuric triflate, is described. Silaphenylmercuric triflate showed remarkable catalytic activity for an indole synthesis, furanoyne cyclization, arylyne cyclization, and tandem carbocyclizations. An efficient flow reaction system for indole synthesis and arylyne cyclization is also described (see figure).

Palladium Complexes of N-Heterocyclic Carbenes as Catalysts for Cross-Coupling Reactions—A Synthetic Chemist's Perspective

Palladium-catalyzed C-C and C-N bond-forming reactions are among the most versatile and powerful synthetic methods. For the last 15 years, N-heterocyclic carbenes (NHCs) have enjoyed increasing popularity as ligands in Pd-mediated cross-coupling and related transformations because of their superior performance compared to the more traditional tertiary phosphanes. The strong sigma-electron-donating ability of NHCs renders oxidative insertion even in challenging substrates facile, while their steric bulk and particular topology is responsible for fast reductive elimination. The strong Pd-NHC bonds contribute to the high stability of the active species, even at low ligand/Pd ratios and high temperatures. With a number of commercially available, stable, user-friendly, and powerful NHC-Pd precatalysts, the goal of a universal cross-coupling catalyst is within reach. This Review discusses the basics of Pd-NHC chemistry to understand the peculiarities of these catalysts and then gives a critical discussion on their application in C-C and C-N cross-coupling as well as carbopalladation reactions.

Mizoroki−Heck Coupling Using Immobilized Molecular Precatalysts: Leaching Active Species from Pd Pincers, Entrapped Pd Salts, and Pd NHC Complexes

The Mizoroki-Heck reaction is a palladium-catalyzed reaction of both practical importance and scientific significance. Two challenges currently faced by practitioners of the Heck and other palladium-catalyzed coupling reactions are (i) minimizing the costs associated with this reaction by developing high TON catalysts or facilitating catalyst recovery and (ii) elucidating the nature of the active species when using various different precatalysts. These two challenges, one practical and one fundamental, served as our motivation in our studies of immobilized molecular palladium(II) complexes as precatalysts in Mizoroki-Heck reactions. This Forum Article describes our investigations in this area, highlighting our approach to the elucidation of the active catalyst by combining kinetic and poisoning studies of several different related precatalysts, our development of new, selective catalyst poisons, and our quest for stable, recyclable supported Heck, Suzuki, and Sonogashira coupling catalysts. Under high-temperature conditions (120 degrees C), all precatalysts studied are conclusively shown to decompose, liberating soluble, active palladium(0) species that are the true catalysts. Techniques for the elucidation of the nature of the truly active Pd species are enumerated.