Organic iodine(V) compounds as terminal oxidants in iron(III) phthalocyanine catalyzed oxidation of alcohols

Charge-Transfer Spectroscopy of Bisaxially Coordinated Iron(II) Phthalocyanines through the Prism of the Lever's EL Parameters Scale, MCD Spectroscopy, and TDDFT Calculations

The position of the experimentally observed (in the UV-vis and magnetic circular dichroism (MCD) spectra) low-energy metal-to-ligand charge-transfer (MLCT) band in low-spin iron(II) phthalocyanine complexes of general formula PcFeL₂, PcFeL'L″, and [PcFeX₂]^2- (L, L', or L″ are neutral and X^- is an anionic axial ligand) was correlated with the Lever's electrochemical E_L scale values for the axial ligands. The time-dependent density functional theory (TDDFT)-predicted UV-vis spectra are in very good agreement with the experimental data for all complexes. In the majority of compounds, TDDFT predicts that the first degenerate MLCT band that correlates with the MCD A-term observed between 360 and 480 nm is dominated by an e_g (Fe, d_π) → b_1u (Pc, π*) single-electron excitation (in traditional D_4h point group notation) and agrees well with the previous assignment discussed by Stillman and co-workers[ Inorg. Chem. 1994, 33, 573-583]. The TDDFT calculations also suggest a small energy gap for b_1u/b_2u (Pc, π*) orbital splitting and closeness of the MLCT₁ e_g (Fe, d_π) → b_1u (Pc, π*) and MLCT₂ e_g (Fe, d_π) → b_2u (Pc, π*) transitions. In the case of the PcFeL₂ complexes with phosphines as the axial ligands, additional degenerate charge-transfer transitions were observed between 450 and 500 nm. These transitions are dominated by a_2u (Pc + L, π) → e_g (Pc, π*) single-electron excitations and are unique for the PcFe(PR₃)₂ complexes. The energy of the phthalocyanine-based a_2u orbital has large axial ligand dependency and is the reason for a large energy deviation for B1 a_2u (Pc + L, π) → e_g (Pc, π*) transition. The energies of the axial ligand-to-iron, axial ligand-to-phthalocyanine, iron-to-axial ligand, and phthalocyanine-to-axial ligand charge-transfer transitions were discussed on the basis of TDDFT calculations.

Application of Lever's EL Parameter Scale toward Fe(II)/Fe(III) versus Pc(2-)/Pc(1-) Oxidation Process Crossover Point in Axially Coordinated Iron(II) Phthalocyanine Complexes

The electronic structures and, particularly, the nature of the HOMO in a series of PcFeL₂, PcFeL'L″, and [PcFeX₂]^2- complexes (Pc = phthalocyaninato(2-) ligand; L = NH₃, n-BuNH₂, imidazole (Im), pyridine (Py), PMe₃, PBu₃, t-BuNC, P(OBu)₃, and DMSO; L' = CO; L″ = NH₃ or n-BuNH₂; X = NCO^-, NCS^-, CN^-, imidazolate (Im^-), or 1,2,4-triazolate(Tz^-)) were probed by electrochemical, spectroelectrochemical, and chemical oxidation as well as theoretical (density functional theory, DFT) studies. In general, energies of the metal-centered occupied orbitals in various six-coordinate iron phthalocyanine complexes correlate well with Lever Electrochemical Parameter E_L and intercross the phthalocyanine-centered a_1u orbital in several compounds with moderate-to-strong π-accepting axial ligands. In these cases, an oxidation of the phthalocyanine macrocycle (Pc(2-)/Pc(1-)) rather than the central metal ion (Fe(II)/Fe(III)) was theoretically predicted and experimentally confirmed.

Theoretical studies unveil the unusual bonding in oxygenation reactions involving cobalt(ii)-iodylarene complexes

DFT calculations reveal that the iodine of cobalt(ii)-iodylarene complexes acts as a directing group via halogen bonding interaction to substrates. A transient 3c-4e bond is formed during oxidation reactions to decrease the activation energy by electron delocalization. Dehydrogenation of dihydroantharacene proceeds via a novel concerted hydride transfer/proton transfer mechanism.

Accurate Prediction of Mössbauer Hyperfine Parameters in Bis-Axially Coordinated Iron(II) Phthalocyanines Using Density Functional Theory Calculations: A Story of a Single Orbital Revealed by Natural Bond Orbital Analysis

Density Functional Theory (DFT) calculations coupled with several exchange-correlation functionals were used for the prediction of Mössbauer hyperfine parameters of 36 bis-axially coordinated iron(II) phthalocyanine complexes with the general formulas PcFeL₂, PcFeL'L″, and [PcFeX₂]^2-, including four new compounds. Both gas-phase and PCM calculations using BPW91 and MN12L exchange-correlation functionals were found to accurately predict both Mössbauer quadrupole splittings and the correct trends in experimentally observed isomer shifts. In comparison, hybrid exchange-correlation functionals underestimated quadrupole splittings, while still accurately predicted isomer shifts. Out of ∼40 exchange-correlation functionals tested, only MN12L was found to correctly reproduce quadrupole splitting trends in the PcFeL₂ complexes coordinated with phosphorus-donor axial ligands (i.e., P(OnBu)₃ ≈ P(OEt)₃ < PMe₃ < P[(CH₂O)₂CH₂]-p-C₆H₄NO₂ < PEt₃ ≈ PnBu₃). Natural Bond Orbital (NBO) analysis was successfully used to explain the general trends in the observed quadrupole splitting for all compounds of interest. In particular, the general trends in the quadrupole splitting correlate well with the axial ligand dependent, NBO-predicted population of the 3d_z2 orbital of the Fe ion and are reflective of the hypothesis proposed by Ohya and co-workers ( Inorg. Chem., 1984, 23, 1303) on the adaptability of the phthalocyanine's π-system toward Fe-L_ax interactions. The first X-ray crystal structure of a PcFeL₂ complex with axial phosphine ligands is also reported.

Metallophthalocyanines as Catalysts in Aerobic Oxidation

The first remarkable property associated to metallophthalocyanines (MPcs) was their chemical “inertness”, which made and make them very attractive as stable and durable industrial dyes. Nevertheless, their rich redox chemistry was also explored in the last decades, making available a solid and detailed knowledge background for further studies on the suitability of MPcs as redox catalysts. An overlook of MPcs and their catalytic activity with dioxygen as oxidants will be discussed here with a special emphasis on the last decade. The mini-review begins with a short introduction to phthalocyanines, from their structure to their main features, going then through the redox chemistry of metallophthalocyanines and their catalytic activity in aerobic oxidation reactions. The most significant systems described in the literature comprise the oxidation of organosulfur compounds such as thiols and thiophenes, the functionalization of alkyl arenes, alcohols, olefins, among other substrates.

Cobalt(II), copper(II), and iron(II) tetrasulfophthalocyanines covalently supported on wool: Synthesis, characterization and catalytic activity

Functionalized wool with cobalt(II), copper(II), and iron(II) tetrasulfophthalocyanine (CoTSPc@wool, CuTSPc@wool, and FeTSPc@wool) have been synthesized and their structures characterized by flame atomic absorption spectroscopy (FAAS), FT-IR, UV-vis, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and the energy dispersive spectroscopy (EDS) analysis. The catalytic activity of the synthesized catalysts was investigated for the aerobic oxidation of alkyl arenes and alcohols to their corresponding carbonyl compounds in the absence of any co-promoter and additional oxidizing reagent. We found the best catalyst for the mentioned reactions is the CoTSPc@wool from the solvent, conversion, temperature, and reaction time point of views. The synthesized catalysts can be readily recycled and reused for several runs without significant loss of efficiency.

Reduction of (chloro)-μ-nitrido-bis[(tetra-tert-butyl-phthalocyaninato)iron(IV)] with organic N-bases

The interaction of (chloro)-[Formula: see text]-nitrido-bis[(tetra-tert-butyl-phthalocyaninato)iron(IV)] Cl(FePc)2N with organic [Formula: see text]-bases L as electron–donors (L [Formula: see text] diethylamine, imidazole, 1-methylimidazole, 2-methylimidazole) with the formation of one-electron reduced species (L)PcFe[Formula: see text]–N[Formula: see text]Fe[Formula: see text]Pc(L) was investigated in benzene at 298 K by UV-visible spectroscopy. The reaction was established to be stepwise process including fast reversible axial binding of two substrate molecules onto iron cations followed by slow one-electron metal-centered reduction. The results of IR, ESI-MS and EPR study support the formation of final product with Fe[Formula: see text]–N[Formula: see text]Fe[Formula: see text] unit and two substrate molecules in the first coordination sphere. The reaction kinetics was studied, the pre-equilibrium constants [Formula: see text] and rate constants [Formula: see text] were obtained. The [Formula: see text] and [Formula: see text] values were found to be linearly correlated with basicity of substrates p[Formula: see text]. The possibility of the transition Fe[Formula: see text] Fe[Formula: see text] is promoted by electron–donor properties of substrate combined with the presence of both electron-rich macrocycle and [Formula: see text]-backdonation Fe [Formula: see text] N[Formula: see text].

Advances in Synthetic Applications of Hypervalent Iodine Compounds

The preparation, structure, and chemistry of hypervalent iodine compounds are reviewed with emphasis on their synthetic application. Compounds of iodine possess reactivity similar to that of transition metals, but have the advantage of environmental sustainability and efficient utilization of natural resources. These compounds are widely used in organic synthesis as selective oxidants and environmentally friendly reagents. Synthetic uses of hypervalent iodine reagents in halogenation reactions, various oxidations, rearrangements, aminations, C-C bond-forming reactions, and transition metal-catalyzed reactions are summarized and discussed. Recent discovery of hypervalent catalytic systems and recyclable reagents, and the development of new enantioselective reactions using chiral hypervalent iodine compounds represent a particularly important achievement in the field of hypervalent iodine chemistry. One of the goals of this Review is to attract the attention of the scientific community as to the benefits of using hypervalent iodine compounds as an environmentally sustainable alternative to heavy metals.

Synthetic applications of pseudocyclic hypervalent iodine compounds

In this review the preparation and structural features of pseudocyclic iodine(iii) and iodine(v) derivatives are discussed, and recent developments in their synthetic applications are summarized.

Synthesis and characterization of μ-nitrido, μ-carbido and μ-oxo dimers of iron octapropylporphyrazine

The structural and electronic properties of single-atom bridged diiron macrocyclic complexes are determined by the nature of the bridge.

Oxidation of alkylaromatics to aromatic ketones catalyzed by metalloporphyrins under the special temperature control method

The aerobic oxidation of alkylaromatics to aromatic ketones catalyzed by metalloporphyrins under the special temperature control method was systematically investigated. Three novel and key points were found to have significant functions in this process, that is, the special temperature control method (initiation at higher temperature and reaction at lower temperature), the synergistic effect of the composite catalysts comprising cobalt and manganese porphyrins, and the amount of catalysts in the reaction. Subsequently, the effects of substitutes on alkylaromatics were also explored under the same conditions. Results showed that alkylaromatic conversions gradually increased from 8.5% to 54.3% with the para-substituents shifting from the electron-donating group to the electron-withdrawing group (i.e., methoxy < hydro < bromo < acyl < nitro). A possible mechanism for this reaction was also proposed.

Stability and catalytic properties of μ-oxo and μ-nitrido dimeric iron tetrasulfophthalocyanines in the oxidation of Orange II by tert-butylhydroperoxide

A study of catalytic activity of μ-nitrido- and μ-oxo-dimeric iron tetrasulfophthalocyanines in the oxidation of Orange II by tert-butylhydroperoxide in aqueous solutions has been performed. It is shown that though in one catalytic cycle activity of μ-oxo-dimer is higher, stability of this complex in oxidative conditions is poor. μ-nitrido-dimer combines relatively good catalytic activity with very high stability in the presence of tert-butylhydroperoxide. The mechanisms of oxidative decomposition of dimers and catalytic oxidation of Orange II have been proposed on the base of kinetic results. The products of catalytic processes are shown to be bio-degradable non-toxic small organic compounds.

Role of Fe(IV)-oxo intermediates in stoichiometric and catalytic oxidations mediated by iron pyridine-azamacrocycles

An iron(II) complex with a pyridine-containing 14-membered macrocyclic (PyMAC) ligand L1 (L1 = 2,7,12-trimethyl-3,7,11,17-tetra-azabicyclo[11.3.1]heptadeca-1(17),13,15-triene), 1, was prepared and characterized. Complex 1 contains low-spin iron(II) in a pseudo-octahedral geometry as determined by X-ray crystallography. Magnetic susceptibility measurements (298 K, Evans method) and Mössbauer spectroscopy (90 K, δ = 0.50(2) mm/s, ΔE(Q) = 0.78(2) mm/s) confirmed that the low-spin configuration of Fe(II) is retained in liquid and frozen acetonitrile solutions. Cyclic voltammetry revealed a reversible one-electron oxidation/reduction of the iron center in 1, with E(1/2)(Fe(III)/Fe(II)) = 0.49 V vs Fc(+)/Fc, a value very similar to the half-wave potentials of related macrocyclic complexes. Complex 1 catalyzed the epoxidation of cyclooctene and other olefins with H(2)O(2). Low-temperature stopped-flow kinetic studies demonstrated the formation of an iron(IV)-oxo intermediate in the reaction of 1 with H(2)O(2) and concomitant partial ligand oxidation. A soluble iodine(V) oxidant, isopropyl 2-iodoxybenzoate, was found to be an excellent oxygen atom donor for generating Fe(IV)-oxo intermediates for additional spectroscopic (UV-vis in CH(3)CN: λ(max) = 705 nm, ε ≈ 240 M(-1) cm(-1); Mössbauer: δ = 0.03(2) mm/s, ΔE(Q) = 2.00(2) mm/s) and kinetic studies. The electrophilic character of the (L1)Fe(IV)═O intermediate was established in rapid (k(2) = 26.5 M(-1) s(-1) for oxidation of PPh(3) at 0 °C), associative (ΔH(‡) = 53 kJ/mol, ΔS(‡) = -25 J/K mol) oxidation of substituted triarylphosphines (electron-donating substituents increased the reaction rate, with a negative value of Hammet's parameter ρ = -1.05). Similar double-mixing kinetic experiments demonstrated somewhat slower (k(2) = 0.17 M(-1) s(-1) at 0 °C), clean, second-order oxidation of cyclooctene into epoxide with preformed (L1)Fe(IV)═O that could be generated from (L1)Fe(II) and H(2)O(2) or isopropyl 2-iodoxybenzoate. Independently determined rates of ferryl(IV) formation and its subsequent reaction with cyclooctene confirmed that the Fe(IV)-oxo species, (L1)Fe(IV)═O, is a kinetically competent intermediate for cyclooctene epoxidation with H(2)O(2) at room temperature. Partial ligand oxidation of (L1)Fe(IV)═O occurs over time in oxidative media, reducing the oxidizing ability of the ferryl species; the macrocyclic nature of the ligand is retained, resulting in ferryl(IV) complexes with Schiff base PyMACs. NH-groups of the PyMAC ligand assist the oxygen atom transfer from ferryl(IV) intermediates to olefin substrates.

Organoiodine(V) reagents in organic synthesis

Organohypervalent iodine reagents have attracted significant recent interest as versatile and environmentally benign oxidants with numerous applications in organic synthesis. This Perspective summarizes synthetic applications of hypervalent iodine(V) reagents: 2-iodoxybenzoic acid (IBX), Dess-Martin periodinane (DMP), pseudocyclic iodylarenes, and their recyclable polymer-supported analogues. Recent advances in the development of new catalytic systems based on the generation of hypervalent iodine species in situ are also overviewed.

Preparation, size control, surface deposition, and catalytic reactivity of hydrophobic corrolazine nanoparticles in an aqueous environment

Nanoparticles, each consisting of one of the three molecular corrolazine (Cz) compounds, H(3)(TBP(8)Cz), Mn(III)(TBP(8)Cz), and Fe(III)(TBP(8)Cz) (TBP(8)Cz = octakis(4-tert-butylphenyl)corrolazinato), were prepared via a facile mixed-solvent technique. The corrolazine nanoparticles (MCz-NPs) were formed in H(2)O/THF (10:1) in the presence of a small amount of a polyethylene glycol derivative (TEG-ME) added as a stabilizer. This technique allows highly hydrophobic Czs to be "dissolved" in an aqueous environment as nanoparticles, which remain in solution for several months without visible precipitation. The MCz-NPs were characterized by UV-visible spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM) imaging, and shown to be spherical particles from 100-600 nm in diameter with low polydispersity indices (PDI = 0.003-0.261). Particle size is strongly dependent on Cz concentration. The H(3)Cz-NPs were adsorbed on to a modified self-assembled monolayer (SAM) surface and imaged by atomic force microscopy (AFM). Adsorption resulted in disassembly of the larger H(3)Cz-NPs to smaller H(3)Cz-NPs, whereby the resulting particle size can be controlled by the surface energy of the monolayer. The Fe(III)Cz-NPs were shown to be competent catalysts for the oxidation of cyclohexene with either PFIB or H(2)O(2) as external oxidant. The reactivity and product selectivity seen for Fe(III)Cz-NPs differs dramatically from that seen for the molecular species in organic solvents, suggesting that both the nanoparticle structure and the aqueous conditions may contribute to significant changes in the mechanism of action of the Fe(III)Cz catalyst.