An anthracene-based fluorescent chemosensor for Zn2+

Tri-armed Schiff base fluorescent sensor for the rapid recognition of Zn(II): application in live cell imaging, test strips and TLC

Various metal ions exist in nature and human beings and play limitless vital roles in both the atmosphere and biology. A fundamental and useful aspect is the qualitative and quantitative assessment of Zn(II) at concentration levels as low as parts per billion (ppb). Thus, the design and development of novel fluorescent turn-on receptors have gained significant interest because of their potential for use in live cell imaging to detect biologically relevant metal ions with high selectivity and sensitivity. The present research illustrates the design and synthesis of a novel fluorescent sensor [(1,3,5-triazine-2,4,6-triyl)tris(hydrazine-2-yl-1-ylidene)tris(methaneylylidene)]tris(2,4-di-tert-butylphenol) (THDBP) for the selective and sensitive probing of Zn(II). The sensor exhibited a fluorescence turn-on mechanism upon treatment with Zn(II) ions at λemi. 503 nm in aq. acetonitrile. The formation of a 1 : 3 complex between THDBP and Zn(II) is confirmed from the Job plot and ESI-MS spectrum. The evaluated limit of detection (LOD) and association constant (Ka) of the sensor THDBP for Zn(II) were found to be 1.03 × 10-10 M and 2.33 × 108 M-1, respectively. Further research demonstrates the practical application of the sensor for the detection of Zn(II) ions in live cells. The sensing ability of the sensor THDBP was also explored through inexpensive test strips and TLC sheets.

Synthesis of Fluorescent Pyrazoline Sensors as Versatile Tool for Zinc ion Detection: A Mini-Review

Zinc ions are one of the 2nd most abundant mineral after iron and it is important for immune system, enzymatic catalysis, DNA synthesis, and maintaining structural integrity in humans. But, monitoring the Zn levels in human body poses more challenges. This review paper investigates (paper from 2010 to 2023) the synthesis of pyrazoline derivatives by different methods, including conventional methods and green chemistry protocol. These Pyrazoline derivatives highlighted for their potential application as chemo-sensor for Zn2+ ions recognition. Pyrazoline compounds exhibit excellent sensitivity & selectivity and emitting blue-light with high quantum yields and electroluminescence, along with a superior limit of detection. These derivatives are stable bioactive molecule, with well-known diverse biological activities. This review not only gives valuable insights into the essential role of Zinc in human physiology but also provides a practical method for accurate Zinc detection in various samples. Which holds the potential for advancements in health diagnostics and environmental monitoring. Because of their significant biological application and selectivity as sensors, researchers have much more attention to prepare green environmentally-friendly pyrazoline derivatives.

Fluorescent Turn-On Sensing of Zinc(II) and Alkaline Phosphatase Activity Using a Pyridoxal-5'-Phosphate Derived Schiff Base

A novel Zn2+ ion and alkaline phosphatase (ALP) selective fluorescence turn-on sensor L was developed by reacting pyridoxal 5'-phosphate (PLP) with hydrazine. Sensor L shows significant flurescence enhancement at 476 nm due to the formation of a L-Zn2+ complex in 1:1 binding stoichiometry with the association constant of 3.1⋅104 M- 1. Using L, the concentration of Zn2+ can be detected down to 2.34 µM, and the practical utility of L was validated by quantifying Zn2+ in real water samples. Additionally, the receptor L was applied to mimic the dephosphorylation reaction catalysed by the enzyme ALP and the resulted fluorescence change was monitored to detect the ALP activity.

Improved Analytical Performance of an Amphiphilic Probe upon Protein Encapsulation: Spectroscopic Investigation along with Computational Rationalization

An easily synthesizable pyrene-based amphiphilic probe (Pybpa) has been developed, which exhibited no responses with metal ions in the pure aqueous medium despite possessing a metal ion-chelating bispicolyl unit. We believe that spontaneous aggregation of Pybpa in aqueous medium makes the ion binding unit not accessible to the metal ions. However, the sensitivity and selectivity of Pybpa toward Zn²⁺ ions drastically improve in the presence of serum albumin protein, HSA. The differences in the microenvironment inside the protein cavity, in terms of local polarity, and conformational rigidity might be attributing factors for that. The mechanistic investigations also suggest that there might be the involvement of polar amino acid residues that take part in coordination with Zn²⁺ ions. Pybpa shows no detectable spectroscopic changes with Zn²⁺ ions in aqueous medium in the absence of HSA. However, it can effectively recognize Zn²⁺ ions in the protein-bound form. Moreover, the photophysical behavior of Pybpa and its zinc complex have been investigated with DFT and docking studies. Noteworthy, such an unusual sensing aspect of Zn²⁺ exclusively in the protein-bound state and particularly in aqueous medium is truly rare and innovative.

A quinazolin-based Schiff-base chemosensor for colorimetric detection of Ni2+ and Zn2+ ions and 'turn-on' fluorometric detection of Zn2+ ion

Herein, we have reported a novel quinazolin-based Schiff base chemosensor (E)-2-benzamido-N'-(1-(pyridin-2-yl)ethylidene)benzohydrazide (L). L has been designed, synthesised and characterised by ¹H-NMR, IR spectroscopy, ESI-MS spectrometry and theoretical studies. The receptor showed appreciable colorimetric λ _max shift for both Ni²⁺ and Zn²⁺ ions and fluorometric "turn on" response in presence of only Zn²⁺ ion. The Jobs plot analysis revealed that receptor forms 2 : 1 complex with both the ions Ni²⁺ and Zn²⁺, further confirmed by ESI-MS analysis. The single crystal structure of L-Ni²⁺ complex (1) has also been determined. The colorimetric detection limits were calculated to 7.9 nM and 7.5 nM respectively for Ni²⁺ and Zn²⁺ in methanol-Tris-HCl buffer medium (10 mM, pH 7.2, 1 : 1 v/v). The chemosensor L can be applied for the recovery of contaminated water samples.

A Practical Hydrazine-Carbothioamide-Based Fluorescent Probe for the Detection of Zn2+: Applications to Paper Strip, Zebrafish and Water Samples

A practical hydrazine-carbothioamide-based fluorescent chemosensor TCC (N-(4-chlorophenyl)-2-(thiophene-2-carbonyl)hydrazine-1-carbothioamide) was applied for Zn2+ detection. TCC exhibited selective fluorescence emission for Zn2+ and did not show any interference with other metal ions. In particular, TCC was utilized for the detection of Zn2+ in paper strips, zebrafish and real water samples. TCC could detect Zn2+ down to 0.39 μM in the solution phase and 51.13 μM in zebrafish. The association ratio between TCC and Zn2+ was determined to be 2:1 by ESI-mass and Job plot. The sensing mechanism of TCC for Zn2+ was illustrated to be a chelation-enhanced fluorescence process through spectroscopic experiments and theoretical calculations.

A ratiometric triazine-based colorimetric and fluorometric sensor for the recognition of Zn2+ ions and its application in human lung cancer cells

Herein, we introduce new ratiometric 2,4,6-triamino-1,3,5-triazine-based probes (R1 and R2) having three different binding sites for three metal ion binders, which can selectively detect Zn²⁺ ions and, particularly, the probe R1 strongly interacts with the human lung cancer cell line (A549). Both the probes R1 and R2 are competently selective towards the Zn²⁺ ions with the detection limits of 1.22 × 10^-7 M and 1.13 × 10^-7 M, respectively. The changes in the structure and absorption properties of the probes are explained by density functional theory (DFT) and time dependent density functional theory (TDDFT) calculations. The absorption and fluorescence color change in the solid TLC plate makes it a brilliant Zn²⁺ sensor in a portable form.

Coumarin-based colorimetric-fluorescent sensors for the sequential detection of Zn2+ ion and phosphate anions and applications in cell imaging

Two novel coumarin based fluorescent sensors CHP and CHS have been synthesized for the sequential detection of Zn²⁺ ion and phosphate anion (PA) in DMF/HEPES buffer medium (1/5 v/v, 10 mM, pH = 7.4). On the addition of Zn²⁺ ion to the solution of CHP or CHS resulted in a pronounced fluorescence enhancement, accompanying noticeable color change (under UV or daylight), while there was hardly obvious change with other competing metal ions co-existing. The detection limits (DL) of CHP and CHS toward Zn²⁺ were separately determined as 1.03 × 10^-7 (R² = 0.9886) and 1.87 × 10^-7 (R² = 0.9902). The PET binding processes were affirmed by spectroscopic techniques, HRMS experiments and theoretical calculations. Subsequently, the CHP-Zn²⁺ or CHS-Zn²⁺ complexes showed high selectivity fluorescence quenching toward PA by snatching Zn²⁺ ion from its complex and the binding processes were reversible. DLs were calculated as 2.07 × 10^-7 M (R² = 0.9928) and 2.63 × 10^-7 M (R² = 0.9954), respectively. Furthermore, the cell imaging experiments demonstrated that the sensors were capable of detecting of Zn²⁺ and PA in vitro cells.

Evaluating the merit of a diethylamino coumarin-derived thiosemicarbazone as an intramolecular charge transfer probe: efficient Zn(ii) mediated emission swing from green to yellow

We report the synthesis and photophysical properties of a coumarin based probe (1E)-1-(1-(7-(diethylamino)-2-oxo-2H-chromen-3-yl) ethylidene) thiosemicarbazide (DIDOT). DIDOT shows a polarity dependent change in the emission maxima in the solution phase. This is explained by the increased dipole moment in the excited state by an intramolecular charge transfer (ICT) process. DIDOT can successfully detect Zn(ii) in aqueous methanol by a shift in the charge transfer emission maxima from approximately 506 to approximately 535 nm. This shift led to a change in the color of the emission from green to yellow under UV-light. The mechanism of Zn(ii) detection has been delineated using electrospray ionization-mass spectrometry (ESI-MS), Fourier-transform infrared spectroscopy (FTIR) and fluorescence time resolved studies coupled with theoretical calculations. The increment in the charge transfer in the Zn(ii) complex of DIDOT over the bare receptor as a consequence of conformational locking was determined to be the underlying cause of the cation detection phenomenon. The limit of detection and binding constant values of DIDOT towards Zn(ii) were approximately 3 × 10^-8 M and 2.35 × 10⁵ M^-1 respectively. Finally, the practical utility of DIDOT has been demonstrated by successful detection and quantification of Zn(ii) in spiked water samples.

Turn on macrocyclic chemosensor for Al3+ ion with facile synthesis and application in live cell imaging

An effort of a new Schiff base macrocyclic chemosensor, 1⁴‑methyl‑2,6,8,12,14,18‑hexaaza‑1,7,13(1,2),4,10,16(1,4)‑hexabenzenacyclooctadecaphane‑2,5,8,11,14,17‑hexaene (me1) and 1⁴,7⁴‑dimethyl‑2,6,8,12,14,18‑hexaaza‑1,7,13(1,2),4,10,16(1,4)‑hexabenzenacyclooctadecadecaphane‑2,5,8,11,14,17‑hexaene (dm2), which enables selective sensing of Al³⁺ in aqueous DMF were synthesized by a simplistic one-step condensation reaction of macrocyclic compounds. The probe me1 and dm2 characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, LC-MS spectral techniques. The compounds as mentioned above subjected to FE-SEM with EDS and elemental color mapping. On addition of Al³⁺, the fluorescent probe me1 and dm2 induces turn-on responses in both absorption and sensing spectra by a PET mechanism. The receptor me1 and dm2 serve highly selective, sensitive and turn-on detection of Al³⁺. Further, they did not interfere with other cations present in biological or environmental samples. The detection limit is found to be 3μM and 5μM. From the view of cytotoxic activity, the ability of these compounds me1 and dm2 to inhibit the growth of KB cell lines examined. The chelating functionality of compounds me1 and dm2 examined for their inhibitory properties of KB cell, live cell images. The compounds me1 and dm2 subjected to theoretical studies by DFT-B3LYP invoking the 6-31G level of theory. The energy of the HOMO and LUMO has been established.

Synthesis and application of a highly selective copper ions fluorescent probe based on the coumarin group

A highly selective copper ions fluorescent probe based on the coumarin-type Schiff base derivative 1 (probe) was produced by condensation reaction between coumarin carbohydrazide and 1H-indazole-3-carbaldehyde. The UV-vis spectroscopy showed that the maximum absorption peak of compound 1 appeared at 439nm. In the presence of Cu²⁺ ions, the maximum peak decreased remarkably compared with other physiological important metal ions and a new absorption peak at 500nm appeared. The job's plot experiments showed that complexes of 1:2 binding mode were formed in CH₃CN:HEPES (3:2, v/v) solution. Compound 1 exhibited a strong blue fluorescence. Upon addition of copper ions, the fluorescence gradually decreased and reached a plateau with the fluorescence quenching rate up to 98.73%. The detection limit for Cu²⁺ ions was estimated to 0.384ppm. Fluorescent microscopy experiments demonstrated that probe 1 had potential to be used to investigate biological processes involving Cu²⁺ ions within living cells.

Terpyridine derivatives as “turn-on” fluorescence chemosensors for the selective and sensitive detection of Zn2+ ions in solution and in live cells

A terpyridine based compound L1 was designed and synthesized as an “off–on” chemosensor for the detection of Zn²⁺.

Selective and Sensitive Fluorescein-Benzothiazole Based Fluorescent Sensor for Zn2+ Ion in Aqueous Media

An efficient fluorescent sensor based on fluorescein-benzothiazole (FB) for Zn²⁺ ion was synthesized and characterized systematically. FB exhibited selective and sensitive recognition toward Zn²⁺ in MeCN-H₂O (v/v = 2/1) over other cations due to the spirolactam ring-opening power of Zn²⁺. The complexation property of FB with Zn²⁺ ion was examined by ¹H NMR, ¹³C NMR and FTIR experiments. The stoichiometric ratio of the FB-Zn²⁺ complex was determined from a Job plot to be 1:1. The binding constant (K _a) of Zn²⁺ binding to FB was found to be 4.22 × 10⁴ M^- 1, with a detection limit of 5.64 μM. In addition, the practical utility of FB was explored in the form of test strips. Graphical Abstract.

A Schiff's base receptor for red fluorescence live cell imaging of Zn2+ ions in zebrafish embryos and naked eye detection of Ni2+ ions for bio-analytical applications

A quinoline based chemosensor for dual detection of Ni²⁺/Zn²⁺ ions and its bio-analytical applications.

A Colorimetric and Fluorescent Chemosensor for the Selective Detection of Cu2+ and Zn2+ Ions

A new bi-functional chemosensor 1 based on 3,5-dichlorosalicylaldehyde and 2-(methylthio)aniline has been synthesized. It can detect Cu²⁺ with a color change from pale yellow to dark yellow in aqueous solution. The selective mechanism of 1 for Cu²⁺ was proposed to be the enhancement of the intramolecular charge transfer (ICT) band, which was explained by theoretical calculations. The sensor 1 could be used to detect and quantify Cu²⁺ in water samples. In addition, the sensor 1 displayed "turn-on" fluorescence response only to Zn²⁺, based on an effect of chelation-enhanced fluorescence (CHEF). Therefore, 1 can serve as a 'single sensor for two different targets' with dual modes.

Understanding Stacking Interactions between an Aromatic Ring and Nucleobases in Aqueous Solution: Experimental and Theoretical Study

Stacking interactions between aromatic compounds and nucleobases are crucial in recognition of nucleotides and nucleic acids, but a comprehensive understanding of the strength and selectivity of these interactions in aqueous solution has been elusive. To this end, model complexes have been designed and analyzed by experiment and theory. For the first time, stacking free energies between five nucleobases and anthracene were determined experimentally from thermodynamic double mutant cycles. Three different experimental methods were proposed and evaluated. The dye prefers to bind nucleobases in the order (kcal/mol): G (1.3) > T (0.9) > U (0.8) > C (0.5) > A (0.3). The respective trend of interaction free energies extracted from DFT calculations correlates to that obtained experimentally. Analysis of the data suggests that stacking interactions dominate over hydrophobic effects in an aqueous solution and can be predicted with DFT calculations.

A turn-on fluorescence chemosensor based on a tripodal amine [tris(pyrrolyl-α-methyl)amine]-rhodamine conjugate for the selective detection of zinc ions

A tris(pyrrolyl-α-methyl)amine (H3tpa) and rhodamine-based conjugate (PR) served as a sensor for the selective detection of Zn²⁺and their application of imaging living cells were studied.

Fluorescence switching method for cascade detection of salicylaldehyde and zinc(II) ion using protein protected gold nanoclusters

A new fluorescence switching sensor for cascade detection of salicylaldehyde (SA) and Zinc(II) ion was developed based on bovine serum albumin protected gold nanoclusters (BSA-AuNCs). In the detection, SA interacted with amino groups of BSA-AuNCs, inducing simultaneous formation of fluorescent Schiff base and fluorescence quenching of AuNCs. Zn(II) could further strongly coordinate with the Schiff base ligands, leading to blue-shift and increase of the fluorescence from Schiff base-metal coordination complexes and simultaneous recovery of fluorescence from AuNCs. The new fluorescence switching sensor for Zn(2+) detection has advantages of simplicity, rapidity, naked-eye detection, high sensitivity and selectivity. The linear range of the method for Zn(2+) detection is from 0.1 μM to 100 μM with the limit of detection (LOD) of 29.28 nM. In practical samples, the recoveries of the samples ranged from 99.63% to 100.58%.

Multiple target chemosensor: a fluorescent sensor for Zn(ii) and Al(iii) and a chromogenic sensor for Fe(ii) and Fe(iii)

A multifunctional fluorescent and colorimetric chemosensor for Zn²⁺, Al³⁺, Fe²⁺ and Fe³⁺ was designed and synthesized.

Aminomethylpyrene-based imino-phenols as primary fluorescence switch-on sensors for Al3+ in solution and in Vero cells and their complexes as secondary recognition ensembles toward pyrophosphate

Three aminomethylpyrene-based salicyl-imines, viz.L1, L2 and L3 were designed and synthesized for Al³⁺ ion sensing.

A simple pincer-type chemosensor for reversible fluorescence turn-on detection of zinc ion at physiological pH range

A dihydrazone based pincer-type chemosensor (Y) which could detect zinc at physiological pH range with reversible fluorescence “Off–On–Off”.

A cap-type Schiff base acting as a fluorescence sensor for zinc(II) and a colorimetric sensor for iron(II), copper(II), and zinc(II) in aqueous media

A simple and low cost chemosensor is described. This sensor could simultaneously detect three biologically important metal ions through fluorogenic (Zn(2+)) and chromogenic (Fe(2+), Cu(2+), and Zn(2+)) methods in aqueous solution. The sensor could function as a "turn-on" fluorescence receptor only to Zn(2+) ions. In addition, the sensor could be successfully applied to the detection of intracellular Zn(2+). Meanwhile, the sensor displayed an obvious red color upon selective binding with Fe(2+). Therefore, the sensor could serve as a useful tool for the discrimination of Fe(2+) from Fe(3+) in aqueous media. Moreover, the sensor also showed color changes from yellow to colorless upon selective binding with Zn(2+) and Cu(2+), respectively. The detection limit of the sensor for Cu(2+) (1.5 μM) is far below the guidelines of the World Health Organization (30 μM) as the maximum allowable copper concentration in drinking water, and therefore it is capable of being a practical system for the monitoring of Cu(2+) concentrations in aqueous samples. These results provide a new approach for selectively recognizing the most important three trace elements in the human body simultaneously, for Zn(2+) by emission spectra and Fe(2+), Cu(2+), and Zn(2+) by the naked eye.

A highly selective quinoline-based fluorescent sensor for Zn(II)

A quinoline-based simple receptor (bis(2-quinolinylmethyl)benzylamine = 1) as a Zn(2+) selective fluorescent chemosensor showed a large fluorescent enhancement with a blue shift in the presence of Zn(2+) which is attributed to a chelation enhanced fluorescence (CHEF) effect with inhibition of a photoinduced electron transfer (PET) process of 1. In particular, this receptor could clearly distinguish Zn(2+) from Cd(2+). The binding mode of 1 and Zn(2+) was found to be a 1:1 and confirmed by Job plot, (1)H NMR titration and ESI-mass spectrometry analysis.

A single chemosensor for multiple analytes: fluorogenic detection of Zn2+ and OAc− ions in aqueous solution, and an application to bioimaging

A single fluorescent chemosensor 1 for multiple analytes (Zn²⁺ and OAc⁻) has been developed and it can monitor Zn²⁺ ions in living cells.