A colorimetric and ratiometric fluorescent turn-on fluoride chemodosimeter and application in live cell imaging: high selectivity via specific SiO cleavage in semi aqueous media and prompt recovery of ESIPT along with the X-ray structures

A multifunctional near-infrared fluorescent probe based on benzothiazole structure for fluoride-ion detection

Fluoride ions (F-) are one of the essential trace elements for the human body and are widely existed in nature. In this study, we present a novel fluorescent probe (YF-SZ-F) designed and synthesized for the specific detection of F-. The probe exhibits high sensitivity, excellent selectivity, and low cytotoxicity, making it a promising tool for biomedical applications. Imaging experiments conducted on zebrafish and Arabidopsis roots demonstrate the probe's remarkable cellular permeability and biocompatibility, laying a solid foundation for its potential biomedical utility. Furthermore, the probe holds potential for practical applications in environmental monitoring and public health through its capability to detect fluoride ions in water samples and via mobile phone software. This multifaceted functionality underscores the broad applicability and significance of the fluorescent probe, not only in scientific research but also in real-world scenarios, contributing to the development of more convenient and precise methods for fluoride detection.

A novel ratiometric fluorescence probe based on the FRET-ICT mechanism for detecting fluoride ions and viscosity

Fluoride ion is not only important for dental health, but also a contributing factor in a variety of diseases. At the same time, fluoride ions and cell viscosity are both important to the physiological environment of mitochondria. We developed a dual-response ratiometric fluorescent probe BDF based on Förster resonance energy transfer (FRET) and intramolecular charge transfer (ICT) mechanism for the detection of F- and viscosity. BDF has an outstanding intramolecular energy transfer efficiency of 97.7% and shows excellent performance for fluorine ion detection. In addition, when the system viscosity increases, the fluorescence emission intensity of BDF is greatly heightened, indicating the possibility of viscosity detection. Finally, based on the fluorescence properties of BDF, we used the probe to detect F- in the toothpaste sample and image exogenous fluoride ions in HeLa cells.

Colorimetric and fluorimetric chemosensor based on upper rim-functionalized calix[4]arene for selective detection of fluoride ion

A new colorimetric and fluorescent chemosensor for fluoride anion based on calix [4]arene bearing four sulfonamide-fluorenone subunits on the upper rim was conveniently synthesized. It showed a remarkable color change as well as the fluorescence quenching upon addition of F^- even in the presence of a wide range of anions in DMSO. The binding property of L with F^- was studied by a combination of various spectroscopic techniques, such as absorption and emission titration, Job's plot and ¹H NMR titration. It is anticipated that this design with functional group attached to upper rim of calix[4]arene platform can provide a new approach for the development of F^- chemosensor.

A simple colorimetric and ratiometric fluoride ion probe with large color change

Two colorimetric and ratiometric fluoride ion probes SHJ-1 and SHJ-2 based on the acylhydrazone skeleton have been developed. Among the eight anions (F-, Cl-, Br-, I-, ClO4 -, H2PO4 -, HSO4 -, CH3COO-), the present probes showed high selectivity and sensitivity toward fluoride ion detection with obvious color change. Notably, the probe SHJ-1 exhibited a red shift of 145 nm upon fluoride sensing, which is the largest value among fluoride ion probes based on acylhydrazone derivates to date. 1HNMR titration study and theoretical calculations suggested that the strong binding of the probe SHJ-1 to fluoride as well as the further deprotonation may facilitate the intramolecular charge transfer transition. These two probes are 1 : 1 complexed with fluoride ions, and the detection limits were calculated to be 1.24 μM for SHJ-1 and 15.73 μM for SHJ-2.

A 2-(benzo[d]thiazol-2-yl)phenol based on conjugated polymer: Highly selective colorimetric fluorescent chemosensor for F-depending on Si–O bond cleavage reaction

Design and synthesis of highly selective fluorine ion probes become particularly important owing to the specific role of fluorine ion in chemical and biomedical progresses. As a new-type of fluorescent material, conjugated polymers with unique photometric properties have been widely researched by scientists in the field of the fluorescence sensors. In this study, the polymer PBTPV-OSi containing benzothiazole moiety is synthesized via palladium-catalyzed Heck coupling reaction. This polymer not only exhibits good solubility in organic solvents but also shows high selectivity for fluorine ion detection in comparison to other anions. Upon addition of F− to PBTPV-OSi solution, Si–O cleavage of PBTPV-OSi leads to the fluorescence quenching of the polymer in tetrahydrofuran dramatically, and the detection limit is 8 × 10−6 mol/L. Moreover, besides detecting fluorine ion from organic phase, the probe can also effectively detect potassium fluoride from inorganic phase. More importantly, a naked-eye detectable chromogenic and fluorogenic dual response to fluorine ion (F−) can be visibly noted and the detection process of fluorine ion is relatively fast.

In Vivo Fluoride Ion Detection and Imaging in Mice Using a Designed Near-Infrared Ratiometric Fluorescent Probe Based on IR-780

A ratiometric near-infrared fluorescence probe based on IR-780 is developed and applied to fluoride anion (F^-) detection in potable water and white flour as well as fluorescence imaging in living cells and mice. The proposed probe not only displays a linear ratiometric (F₇₄₀/F₆₉₀ nm) fluorescence response but also possesses near-infrared wavelengths to F^- with a detection limit of 0.2 μM. Moreover, the designed probe displays high selectivity toward F^-, which makes it feasible for F^- detection in potable water and white flour. More importantly, applied to monitor F^- in living HepG2 cells and male BALB/c mice, the probe indicates good biocompatibility and low cytotoxicity. However, no study for F^- detection has been reported by a ratiometric NIR fluorescent probe so far. We expect that this probe with superior properties has great potential for use in F^- detection in biological systems and in vivo studies.

Excited-state intramolecular proton-transfer (ESIPT) based fluorescence sensors and imaging agents

We review recent advances in the design and application of excited-state intramolecular proton-transfer (ESIPT) based fluorescent probes. These sensors and imaging agents (probes) are important in biology, physiology, pharmacology, and environmental science.

Synthesis of novel AIEE active pyridopyrazines and their applications as chromogenic and fluorogenic probes for Hg2+ detection in aqueous media

A series of AIEE active novel pyridopyrazine derivatives showing selective and sensitive detection of Hg²⁺ in aqueous media is reported.

Synthesis of Bisimidazole Derivatives for Selective Sensing of Fluoride Ion

Rapid and efficient analysis of fluoride ion is crucial to providing key information for fluoride ion hazard assessment and pollution management. In this study, we synthesized one symmetrical structure called 1,4-bis(4,5-diphenyl-1H-imidazol-2-yl)benzene (1a) and two asymmetrical structures, namely 2-(4-(4,5-diphenyl-1H-imidazol-2-yl)phenyl)-1H-phenanthro(9,10-d)imidazole (1b) and 2-(4-(4,5-diphenyl-1H-imidazol-2-yl)phenyl)-1H-imidazo(4,5-f)(1,10)phenanthroline (1c), which served as an efficient anion sensor for fluoride ion over a wide range of other anions (Cl-, Br-, I-, NO₃-, ClO₄-, HSO₄-, BF₄-, and PF₆-) owing to imidazole group in the main backbone. The absorption intensity of compound 1a at λmax 358 nm slightly decreased; however, a new band at λmax 414 nm appeared upon the addition of fluoride ion, while no evident change occurred upon the addition of eight other anions. The photoluminescence intensity of compound 1a at λmax 426 nm was nearly quenched and fluorescence emission spectra were broadened when fluoride ion was added into dimethyl sulfoxide (DMSO) solution of compound 1a. Compared with the optical behaviors of the DMSO solution of compound 1a in the presence of Bu₄N⁺F-, compounds 1b and 1c exhibited considerable sensitivity to fluoride ion due to the increase in coplanarity. Furthermore, compared with the fluorescence emission behaviors of the DMSO solutions of compounds 1a and 1b in the presence of Bu₄N⁺F-, compound 1c exhibited the most significant sensitivity to fluoride ion due to the charge transfer enhancement. Consequently, the detection limits of compounds 1a-1c increased from 5.47 × 10-6 M to 4.21 × 10-6 M to 9.12 × 10-7 M. Furthermore, the largest red shift (75 nm) of the DMSO solution compound 1c in the presence of fluoride ion can be observed. Our results suggest that the increase in coplanarity and the introduction of electron-withdrawing groups to the imidazole backbone can improve the performance in detecting fluoride ion.

Colorimetry and phase transition characteristics in sensing fluoride anion based on hydrazide organogelators

Colorimetry and phase transition characteristics in sensing fluoride anions have been achieved based on hydrazide organogelators.

Turn-on fluorescent sensor for the detection of cyanide based on a novel dicyanovinyl phenylacetylene

A novel phenylacetylene derivative (3) was successfully synthesized via Sonogashira coupling and a Knoevenagel reaction for cyanide ion detection.

Multicolorful ratiometric-fluorescent test paper for determination of fluoride ions in environmental water

A ratiometric-fluorescent test paper for the visual detection of the fluoride ion.

A new hydroxynaphthyl benzothiazole derived fluorescent probe for highly selective and sensitive Cu(2+) detection

A new reactive probe, 1-(benzo[d]thiazol-2-yl)naphthalen-2-yl-picolinate (BTNP), was designed and synthesized. BTNP acts as a highly selective probe to Cu(2+) in DMSO/H2O (7/3, v/v, Tris-HCl 10mM, pH=7.4) solution based on Cu(2+) catalyzed hydrolysis of the picolinate ester moiety in BTNP, which leads to the formation of an ESIPT active product with dual wavelength emission enhancement. The probe also possesses the advantages of simple synthesis, rapid response and high sensitivity. The pseudo-first-order reaction rate constant was calculated to be 0.205min(-1). Moreover, application of BTNP to Cu(2+) detection in living cells and real water samples was also explored.

A real time colorimetric ‘two in one’ kit for tracking ppb levels of uric acid and Hg2+ in live HeLa S3 cells and Hg2+ induced keto–enol tautomerism

A TBET based ‘turn-on’ fluorescent reagent with high Stokes shifts, exhibits selective and colorimetric detection of biologically important uric acid as well as toxic Hg2+.

A thiosemicarbazone based chemo and fluorogenic sensor for Zn2+with CHEF and ESIPT behaviour: computational studies and cell imaging application

A novel diformyl-p-cresol (DFC)–thiosemicarbazide (TS) – based turn-on dual sensor that enables to determine, for the first time, the stepwise formation constants.

An efficient ICT based fluorescent turn-on dyad for selective detection of fluoride and carbon dioxide

A new intramolecular charge transfer based fluorescent turn-on ratiometric probe exhibiting high sensitivity for F⁻ and CO₂.

Spectrometric and kinetics studies involving anionic chromogenic chemodosimeters based on silylated imines in acetonitrile or acetonitrile–water mixtures

The nucleophilic attack of F⁻ or CN⁻ on the silicon center of chemodosimeters, through an S_N2@Si mechanism, released colored phenolates as leaving groups. NMR, PGSE NMR, and UV-vis studies provided evidence on the mechanism of the reactions.

Relay recognition of F−and a nerve-agent mimic diethyl cyano-phosphonate in mixed aqueous media: discrimination of diethyl cyanophosphonate and diethyl chlorophosphate by cyclization induced fluorescence enhancement

F⁻to DCNP detection by relay recognition has been designed and realized for the first time with sequence specificity (F⁻→ DCNP)viaa fluorescence “off–on–on” mechanism.

A new ionophore for chemical sensing of F−, CN− and Co2+ using voltammetric, colorimetric and spectrofluorimetric techniques

TPEI is a novel photometric chemosensor for visual detection of cobalt/fluoride/cyanide ions.

A novel pyrazoline-based fluorescent probe for detecting fluoride ion in water and its application on real samples

We have designed and synthesized a new fluorescent probe, pyrazoline-based probe 1, to detect fluoride ion with high selectivity and sensitivity in aqueous media.

A diaminomaleonitrile based selective colorimetric chemosensor for copper(ii) and fluoride ions

A chemosensor showed colorimetric sensing for copper(ii) and fluoride by changing color from yellow to colorless and to orange.

Phenothiazine based sensor for naked-eye detection and bioimaging of Hg(ii) and F− ions

The design and development of new phenothiazine-based fluorescent probes, which displays selective fluorescence response to Hg²⁺ and F⁻ ions in a reversible manner. The probe is the first example that facilitates the detection of Hg²⁺ at nanomolar concentration.