Synthesis of 3-arylated indolines from dearomatization of indoles

Unbiased C3‐Electrophilic Indoles: Triflic Acid Mediated C3‐Regioselective Hydroarylation of N−H Indoles**

The direct dearomative addition of arenes to the C3 position of unprotected indoles is reported under operationally simple conditions, using triflic acid at room temperature. The present regioselective hydroarylation is a straightforward manner to generate an electrophilic indole at the C3 position from unbiased indoles in sharp contrast to previous strategies. This atom‐economical method delivers biologically relevant 3‐arylindolines and 3,3‐spiroindolines in high yields and regioselectivities from both intra‐ and intermolecular processes. DFT computations suggest the stabilization of cationic or dicationic intermediates with H‐bonded (TfOH)_n clusters.

Ortho-selective C–H arylation of phenols with N-carboxyindoles under Brønsted acid- or Cu(i)-catalysis

Control over chemo- and regioselectivity is a critical issue in the heterobiaryl synthesis via C–H oxidative coupling. To address this challenge, a strategy to invert the normal polarity of indoles in the heterobiaryl coupling was developed. With N-carboxyindoles as umpoled indoles, an exclusively ortho-selective coupling with phenols has been realized, employing a Brønsted acid- or Cu(i)-catalyst (as low as 0.01 mol%). A range of phenols and N-carboxyindoles coupled with exceptional efficiency and selectivity at ambient temperature and the substrates bearing redox-active aryl halides (–Br and –I) smoothly coupled in an orthogonal manner. Notably, preliminary examples of atropselective heterobiaryl coupling have been demonstrated, based on a chiral disulfonimide or a Cu(i)/chiral bisphosphine catalytic system. The reaction was proposed to occur through S_N2′ substitution or a Cu(i)–Cu(iii) cycle, with Brønsted acid or Cu(i) catalysts, respectively.

Control over chemo- and regioselectivity is a critical issue in the heterobiaryl synthesis via C–H oxidative coupling. To address this challenge, a strategy to invert the normal polarity of indoles was developed.

Electrochemistry-controlled dearomative 2,3-difunctionalization of indoles to synthesize oxoindoline derivatives

A general and practical protocol for electrochemisty-controlled dearomative 2,3-difunctionalization of indoles via electrochemically anode-selective oxidative cross coupling has been demonstrated. The reaction runs under metal, oxidant and catalyst free condition,...

Nickel-Catalyzed Dearomative Arylboration of Indoles: Regioselective Synthesis of C2- and C3-Borylated Indolines

Indole dearomatization is an important strategy to access indolines: a motif present in a variety of natural products and biologically active molecules. Herein, a method for transition-metal catalyzed regioselective dearomative arylboration of indoles to generate diverse indolines is presented. The method accomplishes intermolecular dearomatization of simple indoles through a migratory insertion pathway on substrates that lack activating or directing groups on the C2- or C3-positions. Synthetically useful C2- and C3-borylated indolines can be accessed through a simple change in N-protecting group in high regio- and diastereoselectivities (up to >40:1 rr and >40:1 dr) from readily available starting materials. Additionally, the origin of regioselectivity was explored experimentally and computationally to uncover the remarkable interplay between carbonyl orientation of the N-protecting group on indole, electronics of the C2-C3 π-bond, and sterics. The method enabled the first enantioselective synthesis of (-)-azamedicarpin.

Organocatalytic Asymmetric Dearomatization Reaction for the Synthesis of Axial Chiral Allene-Derived Naphthalenones Bearing Quaternary Stereocenters

The highly regio-, diastereo-, and enantioselective dearomatization reaction of 1-substituted 2-naphthols and β,γ-alkynyl-α-imino esters with complete atom economy is disclosed via chiral phosphoric acid catalysis. This protocol provides facile and efficient access to asymmetric construction of a broad range of axially chiral allene-derived naphthalenones bearing quaternary stereocenters in good yields with high diastereoselectivities and enantioselectivities.

Regio- and Stereoselective Cascade of β,γ-Unsaturated Ketones by Dipeptided Phosphonium Salt Catalysis: Stereospecific Construction of Dihydrofuro-Fused [2,3-b] Skeletons

Chiral (dihydro)furo-fused heterocycles are significant structural motifs in numerous natural products, functional materials and pharmaceuticals. Therefore, developing efficient methods for preparing compounds with these privileged scaffolds is an important endeavor in synthetic chemistry. Herein, we develop an effective, modular method by a dipeptide-phosphonium salt-catalyzed regio- and stereoselective cascade reaction of readily available linear β,γ-unsaturated ketones with aromatic alkenes, affording a wide variety of structurally fused heterocyclic molecules in high yields with excellent stereoselectivities. Moreover, mechanistic investigations revealed that the bifunctional phosphonium salt controlled the regio- and stereoselectivities of this cascade reaction, particularly proceeding through the initial ketone α-addition followed by O-participated substitution; and the multiple hydrogen-bonding interactions between Brønsted acid moieties of catalyst and nitro group of aromatic alkene were crucial in asymmetric induction. Given the generality, versatility, and high efficiency of this method, we anticipate that it will have broad synthetic utilities.

Synthesis of indoline-fused eight-membered azaheterocycles through Zn-catalyzed dearomatization of indoles and subsequent base-promoted C-C activation

A cascade reaction involving the Zn-catalyzed dearomatization of indoles, base-promoted ring-expansion and intramolecular S_NAr reaction has been developed. This process realized a novel, atom economical and efficient synthesis of indoline-fused eight-membered azaheterocycles in a one pot manner.

Synthesis of Aza-Eight-Membered Ring-Fused Indolines Initiated by Zn-Catalyzed C2 Alkylation of Indoles and Subsequent Base-Promoted Ring Expansion

A novel and efficient synthesis of aza-eight-membered ring-fused indolines has been developed. This process is realized by zinc-catalyzed C2 alkylation of indoles and subsequent base-promoted ring expansion of the newly formed six-membered ring with alkynes. Easily accessible starting materials, good functional group tolerance, and high atom economy make this procedure attractive.

Direct C3-Selective Arylation of N-Unsubstituted Indoles with Aryl Chlorides, Triflates, and Nonaflates Using a Palladium-Dihydroxyterphenylphosphine Catalyst

A palladium-dihydroxyterphenylphosphine (DHTP) catalyst was successfully applied to the direct C3-arylation of N-unsubstituted indoles with aryl chlorides, triflates, and nonaflates. This catalyst showed C3-selectivity, whereas catalysts with other structurally related ligands exhibited N1-selectivity. Complex formation between the lithium salts of the ligand and the indole is assumed to accelerate the arylation at the C3 position. Reactions using 3-alkylindoles afforded 3,3-disubstituted indolenines, which can be further converted to the corresponding indoline derivatives.

Electrochemical synthesis of 3a-bromofuranoindolines and 3a-bromopyrroloindolines mediated by MgBr2

We report an efficient and environmentally friendly electrochemical approach to perform the bromo cyclization of tryptophol, tryptamine and tryptophan derivatives.

Synthesis of Indolines and Derivatives by Aza-Heck Cyclization

For the first time, an aza-Heck cyclization that allows the preparation of indoline scaffolds is described. Using N-hydroxy anilines as electrophiles, which can be easily accessed from the corresponding nitroarenes, this method provides indolines bearing pendant functionality and complex ring topologies. Synthesis of challenging indolines, such as those bearing fully substituted carbon atoms at C2, is also possible using this method.

Oxidative Coupling of 3-Oxindoles with Indoles and Arenes

A highly efficient method for the oxidative coupling of 2-substituted 3-oxindoles with aromatic compounds to form 2,2-disubstituted indolin-3-ones with broad scope is described. This work utilized oxygen as the terminal oxidant and a base-metal catalyst under mild conditions instead of toxic/precious-metal reagents and higher-molecular-weight oxidants. Quaternary structures were produced in modest-to-excellent yields (up to 96 %) without prefunctionalization.

Stereoselective Cascade Cyclizations with Samarium Diiodide to Tetracyclic Indolines: Precursors of Fluorostrychnines and Brucine

A series of γ-indolylketones with fluorine, cyano or alkoxy substituents at the benzene moiety was prepared and subjected to samarium diiodide-promoted cyclization reactions. The desired dearomatizing ketyl cascade reaction forming two new rings proceeded in all cases with high diastereoselectivity, but with differing product distribution. In most cases, the desired annulated tetracyclic compounds were obtained in moderate to good yields, but as second product tetracyclic spirolactones were isolated in up to 29 % yield. The reaction rate was influenced by the substituents at the benzene moiety of the substrate as expected, with electron-accepting groups accelerating and electron-donating groups decelerating the cyclization process. In case of a difluoro-substituted γ-indolylketone a partial defluorination was observed. The intermediate samarium enolate of the tetracyclic products could be trapped by adding reactive alkylating agents as electrophiles delivering products with quarternary carbons. In the case of a dimethoxy-substituted tetracyclic cyclization product a subsequent reductive amination stereoselectively provided a pentacyclic compound that was subsequently N-protected and subjected to a regioselective elimination. The obtained functionalized pentacyclic product should be convertible into the alkaloid brucine by four well-established steps. Overall, the presented report shows that functionalized tetracyclic compounds with different substituents are rapidly available with the samarium diiodide cascade cyclization as crucial step. Hence, analogues of the landmark alkaloid strychnine, for example, with specific fluorine substitutions, should be easily accessible.

Revisiting Furodiindolines: One-Pot Synthesis of Furodiindolines Using Indole 2,3-Epoxide Surrogates and Their Synthetic Applications

Furodiindolines have emerged as versatile intermediates in various transformations, which are easily obtained from indole 2,3-epoxide surrogates via a one-pot procedure and allowed access to heterocyclic compounds with structural diversity and complexity. Four types of transformations from the furodiindolines have been achieved: (i) dehydrative rearrangement to afford 2,3'-biindoles, (ii) hydrolysis/cyclization to give 3,4-disubstituted quinolines, (iii) ring-opening/cyclization to give pyrroloindolines, and (iv) aminal cleavage to give a 3,3-disubstituted 2-oxindole.

Synthesis of tetracyclic indolin-3-ones through Pd-catalyzed intramolecular deacetylative dearomatization of 3-acetoxy-indoles

An efficient palladium-catalyzed intramolecular deacetylative dearomatization reaction of 3-acetoxyindoles has been developed. A range of tetracyclic indolin-3-ones bearing C2-quaternary stereocenters are achieved in good yields, showing a wide substrate scope for this reaction. A preliminary enantioselective reaction is established to furnish the product in 63% ee by using (R,R,R)-phosphoramide-PE as a chiral ligand.

An efficient palladium-catalyzed intramolecular deacetylative dearomatization reaction of 3-acetoxyindoles is disclosed, affording tetracyclic indolin-3-ones bearing C2-quaternary stereocenters in good yields.

Pd-Catalyzed Dearomative Carboxylation of Indolylmethanol Derivatives

By using a new catalytic system (PdCl₂[P( n-Bu)₃]₂ in combination with ZnEt₂), various 3-indolylmethanol derivatives were successfully carboxylated with CO₂ (1 atm) via dearomatization of the indole nucleus, affording 3-methyleneindoline-2-carboxylates. In contrast, carboxylation of 2-indolylmethanol derivatives afforded unexpected doubly carboxylated products, which are useful synthetic precursors for biologically active compounds.

Biomimetic Oxidative Coupling Cyclization Enabling Rapid Construction of Isochromanoindolenines

Herein, we report a biomimetic oxidative coupling cyclization strategy for the highly efficient functionalization of tetrahydrocarbolines (THCs). This process enables rapid access to complex isochromanoindolenine scaffolds in moderate to excellent yields. The reaction proceeds smoothly and rapidly (complete within minutes) in an open flask. This operationally simple protocol is scalable and compatible with a wide range of functional groups. Late-stage functionalization of a pharmacologically relevant molecule is also demonstrated.

Dearomatization of Indole via Intramolecular [3 + 2] Cycloaddition: Access to the Pentacyclic Skeleton of Strychons Alkaloids

An efficient method to build various multisubstituted polycyclic indoline-annulated normal to medium-size rings through dearomatization of indole via a tandem 1,2-acyloxy migration/intramolecular [3 + 2] cycloaddition process is described. The pentacyclic skeleton of strychnine could be synthesized via this tandem cycloaddition and a further Mannich reaction. This approach would provide a novel strategy to the synthesis of strychons alkaloids.

Access to C5-Alkylated Indolines/Indoles via Michael-Type Friedel-Crafts Alkylation Using Aryl-Nitroolefins

A straightforward synthetic route toward C5-alkylated indolines/indoles has been developed. The strategy is composed of Zn(OTf)₂-catalyzed Friedel-Crafts alkylation of N-benzylindolines with nitroolefins, and a series of diverse indolines was first obtained in up to 99% yield. This reaction provides a direct and practical route to a variety of the C5-alkylated indolines which were also utilized for accessing corresponding indoles. Indoline derivatives with free NH groups could be obtained through an N-deprotection reaction. Moreover, the primary alkyl nitro groups in both indolines and indoles are amenable to further synthetic elaborations, thereby broadening the diversity of the products.

Gold-Catalyzed Synthesis of 2-Sulfenylspiroindolenines via Spirocyclizations

2-Phenylsulfenyl-N-propargyl tryptamines have been prepared by electrophilic sulfuration of the corresponding tryptamines. These compounds undergo gold-catalyzed spirocyclizations to the corresponding 2-phenylthiospiroindolenines in good yields. The compounds were analyzed by NMR experiments, infrared, mass spectra and X-ray diffraction. This method provides a new efficient entry to the synthesis of 2-sulfenyl spiroindolic compounds.

Efficient construction of tetrahydroquinolines via fluorinated alcohol mediated cascade [1,5]-hydride transfer/cyclization

An environmentally benign cascade redox-neutral process was developed for the efficient construction of pharmaceutically important spirocyclic tetrahydroquinolines via a 3-step cascade Knoevenagel condensation/[1,5]-hydride transfer/cyclization.

PhI(OAc)2-mediated dearomative C–N coupling: facile construction of the spiro[indoline-3,2′-pyrrolidine] skeleton

A facile construction of the spiro[indole-3,2′-pyrrolidine] skeleton, through diacetoxyiodobenzene (PIDA) mediated C–N bond-forming dearomatization of C3 sulfonamide linked indole derivatives, has been developed.