Pamam built-on-silicon wafer thin-layer extraction devices for selective metal contamination detection

A Review: Adsorption and Removal of Heavy Metals Based on Polyamide-amines Composites

In recent years, the problem of heavy metal pollution has become increasingly prominent, so it is urgent to develop new heavy metal adsorption materials. Compared with many adsorbents, the polyamide-amine dendrimers (PAMAMs) have attracted extensive attention of researchers due to its advantages of macro-molecular cavity, abundant surface functional groups, non-toxicity, high efficiency and easy modification. But in fact, it is not very suitable as an adsorbent because of its solubility and difficulty in separation, which also limits its application in environmental remediation. Therefore, in order to make up for the shortcomings of this material to a certain extent, the synthesis and development of polymer composite materials based on PAMAMs are increasingly prominent in the direction of solving heavy metal pollution. In this paper, the application of composites based on PAMAMs and inorganic or organic components in the adsorption of heavy metal ions is reviewed. Finally, the prospects and challenges of PAMAMs composites for removal of heavy metal ions in water environment are discussed.

Poly (amidoamine) generation 6 functionalized Fe3O4@SiO2/GPTMS core-shell magnetic NPs as a new adsorbent for Arsenite adsorption: kinetic, isotherm and thermodynamic studies

In this survey a new route has been developed the preparation of poly (amidoamine) generation 6 (PAMAM-G6) dendrimer functionalized Fe3O4/SiO2 nanoparticle and was used for arsenite (As (III)) adsorption. SiO2 was first grafted onto the surface of Fe3O4 to formation a core-shell structure. Then the introduction of epoxy rings were done by hydrolysis of methylsilane groups of 3-Glycidoxypropyltrimethoxysilane (GPTMS) on OH groups of SiO2 and afterwards, PAMAM-G6 reacted with epoxy rings of GPTMS to obtain a multiamino magnetic adsorbent. The as-prepared nanocomposite was characterized by TEM, Zeta potential, FESEM, VSM, FTIR, Raman and XPS techniques. The effects of reaction time from 5 to 50 min, initial As (III) concentration in the range of 1-10 mgL-1, initial adsorbent concentration in the range of 10-50 mgL-1 and initial pH in the range 3-8 were studied. The resulting of kinetic and isotherm models displays high adsorption affinity (233 mg/g) for As (III) and the adsorbent can reach the adsorbent can reach the adsorption equilibrium at a neutral pH (7). The As (III) loaded nanocomposite could be separated readily from aqueous solution by magnetic and regenerated simply via NaOH. The study of the adsorption procedure showed that the pseudo-second order kinetics and Langmuir isotherm well-fitted with the experimental data of As (III) adsorption onto nanocomposite.

Dendrimer-functionalized electrospun nanofibres as dual-action water treatment membranes

This work reports the preparation of composite electrospun membranes combining antimicrobial action with the capacity of retaining low-molecular weight non-polar pollutants. The membranes were electrospun blends of polyvinyl alcohol (PVA) and poly(acrylic acid) (PAA) stabilized using heat curing. The membranes were functionalized by grafting amino-terminated poly(amidoamine) (PAMAM) G3 dendrimers. The antimicrobial effect was assessed using strains of Escherichia coli and Staphylococcus aureus by tracking their capacity to form new colonies and their metabolic impairment upon contact with membranes. The antimicrobial activity was particularly high to the gram-positive bacterium S. aureus with a 3-log reduction in their capacity to colonize dendrimer-functionalized membranes with respect to neat PVA/PAA fibers. The effect to gram-positive bacteria was attributed to the interaction of dendrimers with the negatively charged bacterial membranes and resulted in membranes essentially free of bacterial colonization after 20h in contact with cultures at 36°C. The adsorption of toluene on PAA/PVA fibers and on dendrimer-functionalized membranes was assayed using toluene over a broad concentration range. The host-guest encapsulation of toluene inside dendrimer molecules was computed through docking studies, which allowed calculating a maximum capacity of 14 molecules of toluene per molecule of PAMAM G3. The theoretical prediction was in good agreement with the experimental capacity at the higher concentrations assayed.

New approach for the quantification of metallic species in healthcare products based on optical switching of a Schiff base possessing ONO donor set

A new method is reported for the quantification of some metallic components of healthcare products utilizing a Schiff base chelator derived from 2-hydroxyacetophenone and ethanolamine. The Schiff base chelator recognizes some metallic species such as iron, copper and zinc (important components of some healthcare products), and cadmium (common contaminant in healthcare products) giving colorimetric/fluorimetric response. It coordinates with Fe²⁺/Fe³⁺ and Cu²⁺ ions via ONO donor set and switches the colour to bright red, green and orange, respectively. Similarly, it switches 'ON' a fluorometric response when coordinates with Zn²⁺ and Cd²⁺ ions. In the present approach, detailed studies on the colorimetric and fluorimetric response of ONO Schiff base is investigated in detail. The Job plot for the complexation of ONO switch with various metal ions suggested formation of 1:1 (metal-chelator) complex with Fe²⁺, Fe³⁺, and Cu²⁺ while 1:2 (metal-chelator) for Zn²⁺ and Cd²⁺ ions. The limit of detection, limit of quantification are 6.73, 18.0, 25.0, 0.65, 1.10μM and 27.0, 72.0, 100.0, 2.60 and 4.40μM for Fe²⁺, Fe³⁺, Cu²⁺, Zn²⁺ and Cd²⁺ ions, respectively. Under the optimized conditions, chelator was used for the quantification of important metals present in healthcare products via direct dissolution and furnace treatment during sample preparation. The results were found precise and accurate for both sample preparation techniques using the developed method.