Sexing using single blastomere derived from IVF bovine embryos by fluorescence in situ hybridization (FISH)

Laser assisted blastomere extrusion biopsy of in vitro produced cattle embryos-A potential high throughput, minimally invasive approach for sampling pre-morula and morula stage embryos

Whilst adoption of in vitro production (IVP) of cattle embryos and subsequent biopsy for genetic evaluation is increasing, biopsy techniques primarily used were developed to sample in vivo-produced blastocysts. This study was conducted to develop a laser-assisted blastomere extrusion approach for rapid and minimal-invasive biopsy of IVP cattle embryos at pre-morula to morula stages of development (Day 5 or 6 post-fertilisation). Embryo development into blastocysts was not compromised when ≤3 cells were collected by blastomere extrusion on Day 5 (44.4 ± 4.4 % and 34.3 ± 4.6 %) or Day 6 (58.0 ± 4.3 % and 57.5 ± 5.3 %) post-fertilisation compared with non-biopsied control embryos. Similarly, capacity to withstand cryopreservation was not different between embryos biopsied at Day 5 and 6 post-fertilisation and control-embryos (58.8 ± 6.0 %, 63.5 ± 5.6 %, and 56.0 ± 4.8 %, respectively). When more cells were collected from embryos at Day 6 post-fertilisation (≥8 compared to ≤3 cells), subsequent embryo development was not different (63.6 ± 6.1 % and 73.1 ± 6.2 %, respectively) nor was the capacity to withstand cryopreservation (67.9 ± 9.0 % and 62.5 ± 8.7 %, respectively). For biopsies on Day 6 post-fertilization, 95 % of samples produced a PCR product; however, when compared to the whole embryo PCR results, approximately 11 % of biopsy-samples classified as being from a male embryo were from female embryos (false positive), indicating DNA contamination between samples. In conclusion, results of this study indicate laser-assisted blastomere extrusion is a time efficient and minimally invasive approach to biopsy IVP morula and pre-morula cattle embryos to facilitate genetic analysis.

Generation of Transgenic Cloned Buffalo Embryos Harboring the EGFP Gene in the Y Chromosome Using CRISPR/Cas9-Mediated Targeted Integration

Sex control technology is of great significance in the production of domestic animals, especially for rapidly breeding water buffalo (bubalus bubalis), which served as a research model in the present study. We have confirmed that a fluorescence protein integrated into the Y chromosome is fit for sexing pre-implantation embryos in the mouse. Firstly, we optimized the efficiency of targeted integration of exogenous gene encoding enhanced green fluorescent protein (eGFP) and mCherry in Neuro-2a cells, mouse embryonic stem cells, mouse embryonic cells (NIH3T3), buffalo fetal fibroblast (BFF) cells. The results showed that a homology arm length of 800 bp on both sides of the target is more efficient that 300 bp or 300 bp/800 bp. Homology-directed repair (HDR)-mediated knock-in in BFF cells was also significantly improved when cells were supplemented with pifithrin-μ, which is a small molecule that inhibits the binding of p53 to mitochondria. Three pulses at 250 V resulted in the most efficient electroporation in BFF cells and 1.5 μg/mL puromycin was found to be the optimal concentration for screening. Moreover, Y-Chr-eGFP transgenic BFF cells and cloned buffalo embryos were successfully generated using CRISPR/Cas9-mediated gene editing combined with the somatic cell nuclear transfer (SCNT) technique. At passage numbers 6–8, the growth rate and cell proliferation rate were significantly lower in Y-Chr-eGFP transgenic than in non-transgenic BFF cells; the expression levels of the methylation-related genes DNMT1 and DNMT3a were similar; however, the expression levels of the acetylation-related genes HDAC1, HDAC2, and HDAC3 were significantly higher (p < 0.05) in Y-Chr-eGFP transgenic BFF cells compared with non-transgenic cells. Y-Chr-eGFP transgenic BFFs were used as donors for SCNT, the results showed that eGFP reporter is suitable for the visualization of the sex of embryos. The blastocyst rates of cloned buffalo embryos were similar; however, the cleavage rates of transgenic cloned embryos were significantly lower compared with control. In summary, we optimized the protocol for generating transgenic BFF cells and successfully generated Y-Chr-eGFP transgenic embryos using these cells as donors.

Identification of the Sex of Pre-implantation Mouse Embryos Using a Marked Y Chromosome and CRISPR/Cas9

Although numerous attempts have been made to alter the sex ratio of the progeny of mammals, the limitations of current technologies have prevented their widespread use in farm animals. The presence or absence of a Y chromosome determines whether a mammalian embryo develops as a male or female, and non-invasive genetic reporters such as fluorescence protein markers have been intensively applied in a variety of fields of research. To develop a non-invasive and instantaneous method for advance determination of the sex of embryos, we developed a Y chromosome-linked eGFP mouse line that stably expresses green fluorescent protein under the control of the CAG promoter. The development of the CRISPR/Cas9 system has made it easy to deliver an exogenous gene to a specific locus of a genome, and linking a tracer to the Y chromosome has simplified the process of predicting the sex of embryos collected by mating a Y-Chr-eGFP transgenic male with a wild-type female. XY embryos appeared green, under a fluorescence microscope, and XX embryos did not. Y chromosome-linked genes were amplified by nested PCR to further confirm the accuracy of this method, and the simultaneous transplantation of green and non-green embryos into foster mothers indicated that 100% accuracy was achieved by this method. Thus, the Y-Chr-eGFP mouse line provides an expeditious and accurate approach for sexing pre-implantation embryos and can be efficiently used for the pre-selection of sex.

Determination of Sperm Sex Ratio in Bovine Semen Using Multiplex Real-time Polymerase Chain Reaction

Gender selection is important in livestock industries; for example, female calves are required in the dairy industry. Sex-sorted semen is commonly used for the production of calves of the desired gender. However, assessment of the sex ratio of the sorted semen is tedious and expensive. In this study, a rapid, cost effective and reliable method for determining the sex ratio was developed using a multiplex real-time polymerase chain reaction (PCR) assay. In this assay, the X and Y chromosome-specific markers, i.e., bovine proteolipid protein (PLP) gene and sex-determining region Y (SRY) were simultaneously quantified in a single tube. The multiplex real-time PCR assay was shown to have high amplification efficiencies (97% to 99%) comparable to the separated-tube simplex real-time PCR assay. The results obtained from both assays were not significantly different (p>0.05). The multiplex assay was validated using reference DNA of known X ratio (10%, 50%, and 90%) as templates. The measured %X in semen samples were the same within 95% confidence intervals as the expected values, i.e., >90% in X-sorted semen, <10% in Y-sorted semen and close to 50% in the unsorted semen. The multiplex real-time PCR assay as shown in this study can thus be used to assess purity of sex-sorted semen.

A rapid improved method for sexing embryo of water buffalo

The objective of the experiment of this paper is to develop and improve in the sexing method for preimplantation embryos of water buffalo (Bubalus bubalis) using loop-mediated isothermal amplification (LAMP) reaction. Embryo sexing has been recognized to control effectively the sex of offspring in the embryo transfer industry. A rapid and simple detection system was established by adding ethidium bromide (EB) or 5 μl of CuSO4 (3M) to the product of LAMP reaction. The result of these additions after 2 min was a color change and a precipitate. It could be employed as an alternative method in the detection of the reaction products in place of the time consuming electrophoresis or the turbidity meter. The in vitro produced buffalo embryos were divided into one to eight pieces using a microblade attached to a micromanipulator. The cell number in each piece was counted before sexing. Sexing of DNA samples extracted from one to five biopsies cells was performed by LAMP. After biopsy, the remaining part of the embryos was used to confirm the sex by polymerase chain reaction (PCR). Fifty buffalo embryos were used and the accuracy of sex prediction was 100% when the blastomeres dissociated from a morula exceeds three. In conclusion, the present procedure without turbidity meter and electrophoresis was reliable and applicable for sexing the water buffalo embryos.

Codeposition of dNTPs detection for rapid LAMP-based sexing of bovine embryos

Loop-mediated isothermal amplification (LAMP) is a novel nucleic acid amplification method with high specificity and rapidity under isothermal conditions. According to the LAMP method, a rapid and simple detection system was established for bovine embryo sexing. Two sets of primers were designed by targeting the bovine male-specific sequence and bovine common sequence respectively. The reaction condition of the detection system was optimized within 60 min under isothermal conditions of 65 degrees C by detection of the reaction mixture on agarose gel. Especially, the primers F2 and B2 could replace the F3 and B3 as outer primers, making the primer design simpler and the amplification efficiency higher. Additionally, codeposition of dNTPs was firstly performed to detect the reaction products by addition of 1 microl 0.1 mM CuSO(4), the visible ring-shaped deposit was found in the middle of the reaction tube with negative mixture. It could be employed as an alternative method in the detection of the reaction products in place of the time-consuming electrophoresis or the turbidity meter. Furthermore, the embryo sexing system was carried out in the embryo transfer and achieved 98% of efficiency and 99.5% of accuracy.

The Effects of Blastomere Biopsy and Oxygen Tension on Bovine Embryo Development, Rate of Apoptosis and Interferon-? Secretion

A series of experiments was performed to examine the effects of blastomere biopsies on subsequent development of IVF-derived bovine embryos. The first experiment was designed to assess the optimal time for blastomere removal. One blastomere was removed either 48 or 72 h after IVF. Biopsy at 48 h resulted in 17.2% of embryos proceeding to the blastocyst stage, which was lower than when biopsies were performed at 72 h (37.5%, p < 0.05). In the second experiment, embryos were cultured either under atmospheric or 5% O(2) following blastomere removal. Biopsies had no effect on rate of blastocyst formation with 36% of controls and 33.7% of biopsied embryos proceeding to that stage. However, culture under 5% O(2) significantly increased the number of blastocysts from 29.9% to 40.3% (p < 0.05). This effect was significant in both biopsied and control embryos. In the final experiment, biopsied embryos were again cultured under different oxygen tension. Blastocysts were collected and cultured individually for 48 h in medium droplets in their respective O(2) concentration after which time the medium was assayed for concentration of interferon-tau (IFN-tau). Reduced O(2) concentration again significantly increased blastocyst formation from 24.9% to 41.9% (p < 0.05). IFN-tau secretion was not affected by biopsies, but culture under atmospheric O(2) resulted in significantly increased IFN-tau concentration in medium droplets (12274.0 +/- 2825.9 pM vs 5046.5 +/- 2562.2 pM; p < 0.05).

Effect of ICSI and embryo biopsy on embryo development and apoptosis according to oocyte diameter in prepubertal goats

ICSI and embryo biopsy are routine methods used for assisted reproduction. However, their impact on embryo quality is still poor studied. Moreover, oocyte size is also a crucial factor for blastocyst production. In this study effect of oocyte size, ICSI and embryo biopsy was assessed in terms of incidence of apoptosis and blastocyst development. IVM-oocytes from prepubertal goats were fertilized by ICSI or IVF. Embryos obtained were divided depending on oocyte size, biopsied at day-4 post-insemination/injection and cultured for additional 4-5 days. Apoptotic cell number was assessed by TUNEL staining in day-4 embryos and blastocysts obtained. In each diameter group, ICSI did not affect embryo development, blastocyst cell number and embryo apoptotic grade in comparison to IVF. Embryo biopsy did not affect blastocyst rate and apoptotic cell number, but decreased blastocyst cell number (P=0.0018). Moreover, there was a negative relationship between blastocyst cell number and apoptotic grade (P<0.05). In conclusion, ICSI and embryo biopsy do not have negative effect on embryo quality and development. However, oocyte size has a positive relationship on blastocyst yield and quality.