Differences in boar sperm head shape and dimensions recorded by computer-assisted sperm morphometry are not related to chromatin integrity

Karyotype depends on sperm head morphology in some amniote groups

The karyotype of an organism is the set of gross features that characterize the way the genome is packaged into separate chromosomes. It has been known for decades that different taxonomic groups often have distinct karyotypic features, but whether selective forces act to maintain these differences over evolutionary timescales is an open question. In this paper we analyze a database of karyotype features and sperm head morphology in 103 mammal species with spatulate sperm heads and 90 sauropsid species (birds and non-avian reptiles) with vermiform heads. We find that mammal species with a larger head area have more chromosomes, while sauropsid species with longer heads have a wider range of chromosome lengths. These results remain significant after controlling for genome size, so sperm head morphology is the relevant variable. This suggest that post-copulatory sexual selection, by acting on sperm head shape, can influence genome architecture.

Morphometric assessment of cryopreserved livestock bull spermatozoa in the tropics

The identification of different morphometric patterns of spermatozoa serves as a basis for improving our understanding of the diversity in an ejaculate and to relate them to the potential fertility of males. In this study, we aimed to examine the semen subpopulation structure, following dilution in semen of extenders, using a mathematical approach a possible application to fertility analyses. Ten sexually mature Bos taurus bulls were randomly allotted to one of three groups: (1) Tris-citric acid-egg yolk extender (Tris-EY); (2) commercial egg yolk extender OptiXcell® and (3) commercial egg yolk extender Triladyl®. The results showed significant differences (p < .05) between extenders in terms of values for head size and head shape variables of individual sperm, indicating an influence of extender composition. Sperm head width was found to significantly differ (p < .05) according to the extender, decreasing in the following order: OptiXcell® (4.836 ± 0.017 μm), Triladyl® (4.695 ± 0.012 μm) and Tris-EY (4.638 ± 0.010 μm). Principal component analysis allowed us to identify two subpopulations in OptiXcell®, and three subpopulations were each found in Triladyl® and Tris-EY. Overall, we observed significant differences between sperm subpopulations within each extender (p < .05), with differences in sperm head size and shape between bovine species that can be related to functionality and fertility capabilities.

Feline sperm head morphometry in relation to male pedigree and fertility

Computer-assisted sperm morphometry analysis is an advanced tool which allows to precise measure sperm head parameters like length, width, area, and perimeter. On the basis of these and calculated parameters, morphometric subpopulations of spermatozoa can be distinguished. In many species, the distribution of subpopulation within the ejaculate is related to male fertility. There is no information about such a relation for domestic cats; therefore, the aim of this study was to evaluate whether spermatozoa from non-pedigree and purebred domestic cats differ in morphometric parameters. The second aim was to check if there is a relationship between sperm morphometry and fertility. Urethral semen was collected from 27 tomcats, divided into three study groups: non-pedigree cats of unknown fertility, purebred infertile cats and purebred fertile cats. The morphometric assessment was performed by CASMA, followed by principal component analysis and clustering. The results revealed huge intra- and inter-individual variation in sperm head morphometric parameters and three sperm-head morphometric subpopulations were identified in feline semen. Neither mean values of morphometric parameters nor the distribution of spermatozoa between morphometric subpopulations differ between non-pedigree cats of unknown fertility and purebred infertile and fertile cats. We hypothesize that other factors, especially abnormalities of the midpiece and tail, and overall worse quality of the semen of infertile males could have masked the effect of subtle changes in the sperm head morphometry.

Analysis of changes in the morphological structures of sperm during preservation of liquid boar semen in two different seasons of the year

Animal fertility is the result of a combination of genetic, physiological and environmental factors. Assessment of semen quality plays a key role in determining the reproductive performance of boars. The aim of the study was to determine the effect of two seasons of the year on the morphology, morphometry, cell membrane integrity and mitochondrial activity of sperm during storage of liquid boar semen at 17 °C. The study was carried out using 20 boars. Four ejaculates were collected from each boar in each of two seasons of the year. All tests were carried out five times: at 1, 24, 48, 96 and 168 h during storage. The results showed that sperm in ejaculates collected in summer are more sensitive to storage conditions than those from ejaculates obtained in winter. The percentage of sperm with morphological defects was shown to increase with the storage time of the diluted ejaculates, particularly between 96 and 168 h of preservation. In summer, the percentage of sperm with an intact cell membrane and the percentage with high mitochondrial membrane potential are much lower than in winter, at every hour of semen preservation. In the case of boars used for artificial insemination, it is worth taking into account the season when the semen is collected, especially if it is to be stored in liquid form. Assessment of sperm cell structures during storage of liquid semen should be implemented at insemination stations and should be carried out more often in summer.

Animal board invited review: An update on the methods for semen quality evaluation in swine - from farm to the lab

Pig breeding is mainly conducted through artificial insemination with liquid-stored semen. It is, therefore, crucial to ensure that sperm quality is over the standard thresholds, as reduced sperm motility, morphology or plasma membrane integrity are associated with reduced farrowing rates and litter sizes. This work aims to summarise the methods utilised in farms and research laboratories to evaluate sperm quality in pigs. The conventional spermiogram consists in the assessment of sperm concentration, motility and morphology, which are the most estimated variables in farms. Yet, while the determination of these sperm parameters is enough for farms to prepare seminal doses, other tests, usually carried out in specialised laboratories, may be required when boar studs exhibit a decreased reproductive performance. These methods include the evaluation of functional sperm parameters, such as plasma membrane integrity and fluidity, intracellular levels of calcium and reactive oxygen species, mitochondrial activity, and acrosome integrity, using fluorescent probes and flow cytometry. Furthermore, sperm chromatin condensation and DNA integrity, despite not being routinely assessed, may also help determine the causes of reduced fertilising capacity. Sperm DNA integrity can be evaluated through direct (Comet, transferase deoxynucleotide nick end labelling (TUNEL) and its in situ nick variant) or indirect tests (Sperm Chromatin Structure Assay, Sperm Chromatin Dispersion Test), whereas chromatin condensation can be determined with Chromomycin A3. Considering the high degree of chromatin packaging in pig sperm, which only have protamine 1, growing evidence suggests that complete decondensation of that chromatin is needed before DNA fragmentation through TUNEL or Comet can be examined.

Identification of honey bee sperm structures following the use of various staining techniques

Introduction

Bees are currently artificially inseminated on a large scale for breeding and research purposes. The sperm of bees has a complex and varied structure, and determination of specific morphological defects in it is very difficult. Its comprehensive analysis by inspecting morphology and morphometry is an important tool for improving honey bee lines. The staining technique should interfere with the cells as little as possible while clearly showing the boundaries of the head and other elements. In this study, a comparative analysis of the morphometry of sperm was performed with various techniques for staining drone semen.

Material and Methods

Semen was collected from 150 sexually mature Buckfast bee drones by artificially everting the copulatory organ. The morphology and morphometry of the sperm were assessed on slides prepared by three staining methods according to the protocols described online, using the Sperm Class Analyzer system. The lengths of the acrosome, nucleus, head in total, midpiece, tail without midpiece, tail with midpiece, and entire sperm were measured.

Results

The most details of the drone sperm structure could be seen when stained with the eosin-nigrosin complex. This method made it possible to identify all structures and revealed the uneven distribution of sperm proteins in different parts of the tail. With the Sperm Stain method fewer details of the sperm structure were recognisable, and the fewest were with SpermBlue.

Conclusion

The staining method, and thus the chemical reagents used, affect the dimensions of drone sperm. Given the great research potential of modified spermatozoa of insects, a standard for slide preparation for the evaluation of morphological and morphometric semen parameters should be established, as this would facilitate result comparison between laboratories and increase the value of morphological analysis of sperm for predicting and assessing fertility.

Morphometry of Boar Spermatozoa in Semen Stored at 17 °C—The Influence of the Staining Technique

Simple Summary

To obtain satisfactory results in artificial insemination, it is necessary to use high-quality ejaculates for the production of insemination doses and then maintain the biological value of the sperm during storage. Boar spermatozoa, owing to the specific structure of the cell membrane, are particularly sensitive to temperature changes. For this reason, cryopreservation cannot be used in artificial insemination practice, and there may be limitations to successful storage of semen in a liquid state. The practice of using boar semen for artificial insemination does not include analyses of the effect of storage time of boar semen on sperm dimensions. Therefore, the aim of the study was to analyse the morphometry of sperm during storage of liquid boar semen. An attempt was also made to evaluate the suitability of three staining methods for assessment of boar sperm morphometry. The morphometric dimensions of boar sperm were shown to change during storage of liquid semen. These changes affected the sperm head more than the tail and were due to the staining method used. The analyses are very important as they provide more information about the morphometric dimensions of the sperm during preservation of boar semen. The applied sperm staining techniques allows for a more accurate assessment of male reproductive cells.

Abstract

The aim of the study was to assess the morphometry of sperm during storage of liquid boar semen at 17 °C. An attempt was also made to evaluate the suitability of three staining methods for assessment of boar sperm morphometry. The study was carried out on 20 Landrace boars. Semen was collected from the boars every 5 days by the manual method. Four ejaculates from each boar were analysed (80 ejaculates in total). Analyses were performed five times: at 1 h, 24 h, 48 h, 96 h, and 168 h after semen collection. Blisters with insemination doses were opened immediately before the analyses. From each insemination dose, smears were prepared for morphometric evaluation of sperm, which were stained by three methods (eosin-nigrosin—EN, eosin-gentian—EG, and SpermBlue—SB). Morphometric measurements of 15 randomly selected sperm with normal morphology were performed on each slide. The morphometric measurements included the following parameters: sperm head length, width, area, and perimeter; tail length; and total sperm length. The results of the morphometric measurements were used to calculate the head shape index. The morphometric dimensions of the sperm were shown to change during storage of semen at 17 °C. The extent of these changes, however, depended on the staining method used, as the three methods result in different morphometric dimensions of sperm, in the case of both the head and the tail. In the slides stained by the eosin-nigrosin method, the dimensions of the head and tail were smaller at every time of storage than in the slides stained by the SpermBlue and eosin-gentian methods.

Influence of Fat-Soluble Vitamin Intramuscular Supplementation on Kinematic and Morphometric Sperm Parameters of Boar Ejaculates

Ejaculate quality can be regarded as multifactorial, with nutrition being a factor that could directly influence sperm parameters. The present study aimed to evaluate seminal quality associated with seasonal fat-soluble vitamin supplementation of boars. Seven sexually mature boars were randomly allotted to one of the three groups, and fed one of the three supplementary diets for 32 weeks: (1) control treatment (COD), without supplementation of fat-soluble vitamins, (2) treatment containing 100% fat-soluble vitamin supplementation administered intramuscularly, which was based on fat soluble vitamin supplementation (A, D3, E) (FVD1), and (3) treatment containing 50% of fat-soluble vitamin supplementation (FVD12). Semen was collected at 7-day intervals. Semen samples were analyzed to assess several sperm parameters using the Computer-Assisted Semen Analysis (CASA) ISAS^®v1 system. Results showed that groups receiving FVD1 and FVD12 supplementation had an increased semen volume. The percentages of motile and progressively motile sperm were increased by FVD1 treatment. A statistically significant interaction between treatment and season was found in the percentage of motility and progressive motility (p < 0.05). Sperm concentrations showed significant differences (p < 0.05) between treatments. Velocity variables (VSL, VCL, and VAP) were higher (p < 0.05) in boars that received fat-soluble vitamin supplementation in comparison to controls receiving no supplementation. The FVD1 treatment presented spermatozoa with greater head size and more elongated heads (p < 0.05). Overall, the utilization of dietary fat-soluble vitamin supplementation significantly improved the semen quality of boar ejaculates. This highlights the importance of fat-soluble vitamin supplementation in sexually active boars.

Effects of copper citrate on physiological-biochemical parameters of ejaculate of sire boars

Revealing peculiarities of the course of physiological and biochemical processes in the formation of parameters of ejaculate allows effective correlation of biological completeness of spermatozoids based on the use of chelate compounds of limiting microelements, particularly copper. The study was focused on determining changes in processes of spermatogenesis during correction of mineral nutrition. In the experiment, we used adult boars of the same age, live weight and quality of ejaculates. They consumed copper citrate during the 45 day experiment in doses higher than the norm by 10% (1.5 mg per 1 kg of combined feed) and 20% (3 mg per 1 kg of combined feed) compared with the control. We determined difference in the effects of different doses of copper citrate on the formation of parameters of ejaculates in sire boars. Addition of the mineral additive to the feed in the doses 10% exceeding the norm promoted increase in the parameters of functional activity of spermatozoids – mobility and survival – on day 45 of the intake, which occurred against the background of acceleration of peroxidation processes (increase in the concentration of thiobarbituric acid of active compounds) and activation of the system of antioxidant protection – increase in the activity of superoxide dismutase and decrease in the level of catalase in the sperm. At the same time, we observed increase in the morphometric parameters of spermatozoids – general length, width, length and volume of the head. On day 30, sire boars that had been consuming copper citrate in the amounts 20% above the norm were observed to have increase in concentration of spermatozoids, their mobility and survivability, though a decrease was seen in the morphometric parameters of the gametes. Further intake of this element caused increase in the amount of abnormal forms of spermatozoids. Under the action of this additive, we determined increase in the amount of metabolites of lipid peroxidation – conjugated dienes and thiobarbituric acids of active compounds, and also weakening of the system of antioxidative protection – decrease in the content of reduced glutathione and accumulation of dehydroascorbic acid. Thus, the intake of copper citrate in the amounts of 10% above the norm facilitated morpho-functional parameters of spermatozoids by activating the system of antioxidant protection. It would be promising to conduct further research to determine the effects of copper citrate on the processes of activation and capacitation of spermatozoids and fertilization of oocytes in in vivo and in vitro conditions.

Effects of breed and ejaculate volume on sperm morphology and semen parameters of boars

The aim of the study was to determine the relation between the semen quality, frequency of sperm defects, sperm dimensions and shape, and the ejaculate volume of Large White and Landrace boars. A total of 648 ejaculates collected from 31 Large White and 30 Landrace boars were divided into three groups according to the criterion of the ejaculate volume. In this study Landrace boars produced ejaculates with higher volume, sperm concentration, and total numbers of spermatozoa than Large White boars. Landrace boars also showed a lower frequency of sperm with morphological abnormalities (P < 0.05). Landrace boars sperm had larger heads, which were by 0.15 μm longer, and by a larger perimeter and area (P < 0.05). Landrace boar spermatozoa also had a longer flagellum and were generally larger and by 2.07 μm longer than Large White boar sperm (P < 0.05). Significant differences were also found in the shape of sperm of the two breeds (P < 0.05). Landrace boars sperm had more elongated heads, and the ratio of head size to flagellum length was lower than in Large White boars sperm (P < 0.05). Sperm from ejaculates with low volume had a shorter flagellum and a greater head length/flagellum length ratio than sperm from medium- and high-volume ejaculates (P < 0.05).

Relationship between Fertility Traits and Kinematics in Clusters of Boar Ejaculates

Simple Summary

Swine reproduction efficiency is determined by the fertility potential of the sow and sperm quality. The objective of this study is to compare boar sperm motility and kinematic features to evaluate their relationships with reproductive success after artificial insemination (AI). In this study, the movement patterns of boar ejaculates were analyzed by a computer-assisted semen analysis (CASA)-Mot system, and the kinematic values of ejaculate clusters were assessed. The semen of the Pietrain boars showed more linear trajectory of the spermatozoa, while curvilinear velocity and oscillatory movement characterized the semen of the Duroc × Pietrain boars. The offspring of sows inseminated with Pietrain boars showed significantly lower number of stillbirths. In addition, ejaculate grouping into clusters did not have a predictive capacity on litter size variables. Nevertheless, the kinematic variables of the ejaculate may have a predictive, albeit reduced, capacity regarding litter size variables. The results of this study therefore open up possibilities for future assessments of fertility.

Abstract

The aim was to determine the relationship between kinematic parameters of boar spermatozoa and fertility rates of sow, as well as to assess the effect of sperm clusters on the fertility capacity of the ejaculate. Semen samples were collected from 11 sexually mature boars. Samples were analyzed by an ISAS^®v1 CASA-Mot system for eight kinematic parameters. Ejaculate clusters were characterized using multivariate procedures, such as principal factors (PFs) analysis and clustering methods (the k-means model). Four different ejaculate clusters were identified from two kinematic PFs which involved linear trajectory and velocity. There were differences (p < 0.05) between the sperm kinematic variables by sire line. There was no statistical difference (p > 0.05) between dam lines and ejaculate clusters in fertility variables. The discriminant ability of the different kinematics of sperm variables to predict litter size fertility was analyzed using receiver operating characteristics (ROC) curve analysis. Curvilinear velocity (VCL), average path velocity (VAP), amplitude of lateral head displacement (ALH), and beat-cross frequency (BCF) showed significant, albeit limited, predictive capacity for litter size fertility variables (range: 0.55–0.58 area under curve, AUC). The kinematic analysis of the ejaculates in clusters did not have a predictive capacity for litter size variables.

A Bayesian analysis of boar spermatozoa kinematics and head morphometrics and their relationship with litter size fertility variables

The semen movement and sperm head size patterns of boar ejaculates were analysed using computer-assisted semen analysis (CASA)-Mot and -Morph systems. The aim of the present study was to compare morphometric and kinematics variables from boars and to determine the relationship with sow fertility variables related to litter size. The females were from maternal crossing schemes such as the continuous 3-generation cross between York (Y), Landrace (L), and Pietrain (P) hybrid sows and Pietrain boars. Semen samples were collected from 11 sexually mature boars from two sire lines. Samples were analysed using the ISAS^® v1 system to evaluate eight kinematic variables of sperm velocity, progressiveness and undulations. Four morphometric parameters of sperm head size (length, width, area and perimeter) were analysed. Bayesian analysis revealed relevant differences in four kinematic variables (VSL, LIN, STR and WOB) between sire lines, with a probability of relevance (P_R ) of 0.79-0.91, and Pietrain boars were associated with higher progressive motility compared with Duroc x Pietrain boars. Moreover, there were relevant differences in all morphometric variables (P_R  = 0.82-0.85) between sire lines. The dam line Y-L-50 (½ Y × ½ L) had higher total born per litter and piglets born alive, and YLP-75 (¹ /₈ Y × ¹ /₈ L × ³ /₄ P) was associated with higher values of litter weight at birth (highest posterior density region at 95% = 9.92, 16.41 kg). There are relevant differences in kinematic variables between the assessed sire lines and the differences in morphometric and litter size variables were also relevant. The York-Landrace hybrid sows had higher total born per litter and piglets born alive, and there were relevant differences when compared with YLP-50 (¼ York × ¼ Landrace × ½ Pietrain). Differences in kinematic and morphometric variables between sire and dam lines related to fertility need to be further studied.

Assessment of the Morphometry of Heads of Normal Sperm and Sperm with the Dag Defect in the Semen of Duroc Boars

Introduction

The Dag defect is one of the primary morphological defects in sperm correlating with reduced fertility. This defect is found in the spermatozoa of many livestock species. The aim of the study was to assess the morphometry of the heads of normal sperm and sperm with the Dag defect in the semen of Duroc breeding boars.

Material and Methods

Sperm morphology was examined in ten ejaculates each from 12 Duroc boars. In total, 3,600 morphologically normal sperm and 838 sperm with the Dag defect were evaluated. The area, perimeter, length and width of the sperm head were measured and these basic morphometric parameters were used to calculate four additional shape indices characterising the sperm head, i.e. ellipticity, elongation, roughness and regularity.

Results

Sperm with this defect had markedly smaller heads, 0.32 μm shorter and 0.19 μm narrower than the heads of sperm with normal morphological structure. The heads of sperm with the Dag defect also had a 1.1μm smaller perimeter and a 2.5 μm² smaller surface area than the heads of morphologically normal sperm.

Conclusions

The Dag defect is found in boar sperm irrespective of the age of the individual. It affects the morphology of the sperm head.

Characterization of Bottlenose Dolphin (Tursiops truncatus) Sperm Based on Morphometric Traits

Simple Summary

Dolphins are one of the best adapted aquatic mammalians in captivity. While these animals can reproduce naturally in aquaria, many aspects related to their reproduction are still unknown. Their behavior, sociability with humans and ability to learn make dolphins ideal subjects for investigating their reproduction features for conservation programs aimed at this aquatic species and others. It is known that dolphins use a multi-male mating strategy, in which sperm competition could play a fundamental role. This study aims to characterize the shape and dimensions of dolphin sperm from two mature males and putatively classifies them into subpopulations. Moreover, the influence of sex hormone levels (testosterone) and refrigeration (temperature and storage period) with sperm dimension was evaluated. The results indicated that sperm dimensions and shape differed between the two males studied and that the sperm of both males could be classified into two subpopulations depending on their dimensions. Moreover, both testosterone levels and refrigeration were seen to influence sperm dimensions. This investigation provides new insights into sperm competition in dolphin species, and the results could be extrapolated to other endangered aquatic mammalian species.

Abstract

Bottlenose dolphin (Tursiops truncatus) males follow many reproductive strategies to ensure their paternity. However, little is known about the sperm traits, including morphometric features, that contribute to their reproductive success. Our aim was to study dolphin sperm morphometry (a total of 13 parameters) in two adult males to evaluate (i) presumptive sperm subpopulations, (ii) the correlation of sperm morphometry with testosterone levels and (iii) the effect of refrigerated storage on the sperm morphometry. Sperm populations were classified into four principal components (PCs) based on morphometry (>94% of cumulative variance). The PCs clustered into two different sperm subpopulations, which differed between males. Furthermore, the levels of serum testosterone were positively correlated with the length of the midpiece but negatively correlated with head width and the principal piece, flagellum and total sperm lengths. Most of the sperm morphometric parameters changed during the storage period (day 1 vs. day 7), but only the principal piece length was affected by the storage temperature (5 °C vs. 15 °C). This is the first study to identify dolphin sperm subpopulations based on morphometry and the influence of serum testosterone and refrigeration on sperm morphometry.

Predictive Capacity of Boar Sperm Morphometry and Morphometric Sub-Populations on Reproductive Success after Artificial Insemination

Simple Summary

The efficiency of swine production measured as litter size influences the profitability of the pig industry. Furthermore, sow fertility potential depends in part on the boar semen quality and reproductive efficiency. The objective of this study is to compare boar sperm head size and morphometric features of shape to evaluate their relationships with reproductive success after artificial insemination (AI). A morphometric analysis of boar ejaculate reveals morphometrically separate sub-populations. The differences between sub-populations are displayed for sperm head size. In addition, sperm clustering into sub-populations did not have a predictive capacity on litter size variables. Nevertheless, the morphometric variables of the sperm may have a predictive, albeit reduced, capacity regarding litter size variables. The results of this study therefore open up possibilities for future assessments of fertility.

Abstract

The aim of the study was to compare the morphometric features of sperm head size and shape from the Pietrain line and the Duroc × Pietrain boar crossbred terminal lines, and to evaluate their relationship with reproductive success after artificial insemination of sows produced from crossbreeding the York, Landrace and Pietrain breeds. Semen samples were collected from 11 sexually mature boars. Only ejaculates with greater than 70% motility rate and <15% of abnormal sperm were used for artificial inseminations (AI) and included in the study. Samples were analyzed using an ISAS^®v1 computer-assisted sperm analysis system for eight morphometric parameters of head shape and size (CASA-Morph). Sub-populations of morphometric ejaculates were characterized using multivariate procedures, such as principal component (PC) analysis and clustering methods (k-means model). Four different ejaculate sub-populations were identified from two PCs that involved the head shape and size of the spermatozoa. The discriminant ability of the different morphometric sperm variables to predict sow litter size was analyzed using a receiver operating characteristics (ROC) curve analysis. Sperm head length, ellipticity, elongation, and regularity showed significant predictive capacity on litter size (0.59, 0.59, 0.60, and 0.56 area under curve (AUC), respectively). The morphometric sperm sub-populations were not related to sow litter size.

Evaluation of the Morphometry of Sperm from the Epididymides of Dogs Using Different Staining Methods

Evaluation of sperm morphometry is an important criterion in the diagnosis of a male animal's suitability for breeding. The aim of the study was to evaluate the morphometry of sperm from the epididymides of dogs subjected to routine castration using various staining methods. The study was carried out on semen collected from ten healthy dogs. Gonads were obtained from each dog during routine castration at a veterinary surgery. Then, the epididymides (caput, corpus, cauda) were isolated from the gonads, semen was collected from them and microscope slides were prepared. The slides for evaluation of sperm morphometry were prepared by four methods: DiffQuik, SpermBlue, eosin-nigrosin and eosin-gentian. A total of 2400 sperm were analyzed (240 sperm from the dog). The sperm collected from the caput and corpus of the epididymis were found to have larger heads and tails than those collected from the cauda of the epididymis. The staining method was shown to affect the morphometry of sperm taken from the epididymides of dogs. The staining methods differentiate the dimensions of the head of sperm in different parts of the epididymis but do not affect the length of the sperm tail. The occurrence of differences in the head dimensions of sperm may be linked to the use of different fixatives and chemical reagents in the staining procedure. Sperm stained by the EN method had the smallest head and tail dimensions. The greatest head area was noted in the sperm stained by the EG method. In the slides stained by the SB method, the sperm heads were relatively long but narrow. The methods used are suitable for the evaluation of sperm structure, and the possibility of using all four methods enables a full characterization of sperm collected from the caput, corpus and cauda of the epididymides of dogs.

Evaluation of pentoxifylline and Basal Medium Eagle supplemented to diluent on cryopreserved goat spermatozoa

This study investigated the effect of pentoxifylline (PTX) and Basal Medium Eagle (BME) on frozen-thawed goat spermatozoa. Immediately after initial examination of ejaculated semen, samples were pooled and reexamined for quality. Then, samples were divided into eight equal aliquots and diluted with a basic tris-extender containing PTX (3, 6, 9 mM) and BME (5 mM) to reach a final concentration of 25 × 10⁹ and frozen. After 24 hr, the samples were individually thawed at 37°C for 30 s and evaluated for different characteristics. Obtained post-thaw results from Computer-Assisted Sperm Analysis indicate using of 3 and 6 mM PTX led significantly to an improvement in total motility, progressive motility and velocity characteristics of spermatozoa, except the beat/cross frequency (BCF) which indicated statistically no differences (p > .05) among control and treatments. Diluents prepared with BME (5 mM) and PTX alone (3 and 6 mM) improved significantly the membrane integrity-functionality, acrosome integrity and also hyaluronidase activity. Regarding recovery rate, the results showed significantly (p < .05) higher values for diluents containing 3 and 6 mM PTX compared to other groups. Malondialdehyde concentration exhibited also a significant difference (p < .05) in diluents supplemented with 5 mM BME, 3, 6 and 9 mM PTX, and mixture of 3 mM PTX and 5 mM BME which illustrate a similarity for active mitochondria, apoptotic-like and dead spermatozoa. Finally, the ratio of sperm chromatin dispersion stained spermatozoa presented significant differences (p < .05) among treatments in which the diluents added PTX alone demonstrated significantly lower values than control and extenders containing the mixtures of BME and PTX. In conclusion, the observation in this study indicates using of 3 and 6 mM PTX and BME alone may improve significantly (p < .05) the quality of cryopreserved goat spermatozoa.

Transcriptome profiling of porcine testis tissue reveals genes related to sperm hyperactive motility

BACKGROUND

Sperm hyperactive motility has previously been shown to influence litter size in pigs, but little is known about the underlying biological mechanisms. The aim of this study was to use RNA sequencing to investigate gene expression differences in testis tissue from Landrace and Duroc boars with high and low levels of sperm hyperactive motility. Boars with divergent phenotypes were selected based on their sperm hyperactivity values at the day of ejaculation (day 0) (contrasts (i) and (ii) for Landrace and Duroc, respectively) and on their change in hyperactivity between day 0 and after 96 h liquid storage at 18 °C (contrast (iii)).

RESULTS

RNA sequencing was used to measure gene expression in testis. In Landrace boars, 3219 genes were differentially expressed for contrast (i), whereas 102 genes were differentially expressed for contrast (iii). Forty-one differentially expressed genes were identified in both contrasts, suggesting a functional role of these genes in hyperactivity regardless of storage. Zinc finger DNLZ was the most up-regulated gene in contrasts (i) and (iii), whereas the most significant differentially expressed gene for the two contrasts were ADP ribosylation factor ARFGAP1 and solute carrier SLC40A1, respectively. For Duroc (contrast (ii)), the clustering of boars based on their gene expression data did not reflect their difference in sperm hyperactivity phenotypes. No results were therefore obtained for this breed. A case-control analysis of variants identified in the Landrace RNA sequencing data showed that SNPs in NEU3, CHRDL2 and HMCN1 might be important for sperm hyperactivity.

CONCLUSIONS

Differentially expressed genes were identified in Landrace boars with high and low levels of sperm hyperactivity at the day of ejaculate collection and high and low change in hyperactivity after 96 h of sperm storage. The results point towards important candidate genes, biochemical pathways and sequence variants underlying sperm hyperactivity in pigs.

Microfluidic systems for hydrodynamic trapping of cells and clusters

Microfluidic devices have been widely applied to trapping and isolation of cells and clusters for controllable intercellular environments and high-throughput analysis, triggering numerous advances in disease diagnosis and single-cell analysis. Passive hydrodynamic cell trapping is one of the simple and effective methods that has been gaining attention in recent years. Our aim here is to review the existing passive microfluidic trapping approaches, including microposts, microfiltration, microwells, and trapping chambers, with emphasis on design principles and performance. We summarize the remarkable advances that hydrodynamic trapping methods offer, as well as the existing challenges and prospects for development. Finally, we hope that an improved understanding of hydrodynamic trapping approaches can lead to sophisticated and useful platforms to advance medical and biological research.

Comparison of the structure of chinchilla sperm isolated from semen and from the tail of the epididymis

Sperm cells isolated from the tail of the epididymis and from the semen of the same individuals were analysed. The use of silver nitrate to stain sperm cells isolated from the tail of the epididymis made it possible to identify structures that were not visible in the sperm from semen. Silver nitrate very clearly distinguished the acrosomal and distal parts of the sperm head. Following silver nitrate staining, the sperm isolated from the tail of the epididymis were characterized by dark 'collars' in the distal part of the head. These 'collars' are not visible in the sperm cells isolated from semen. The results of the study indicate differences in the dimensions of sperm isolated from the tail of the epididymis and sperm in semen. Sperm isolated from the tail of the epididymis had smaller heads, despite their longer length, and had longer midpieces and tails than ejaculate sperm. Silver nitrate staining is a simple and fast technique. Silver nitrate makes it possible to identify the acrosome and post-acrosomal region of the sperm head and to clearly identify the midpiece. Therefore, it can be successfully used to supplement routine techniques for evaluating sperm morphology or as an independent technique.

An update on boar semen assessments by flow cytometry and CASA

In the quest for predicting fertility of an individual, enhancing semen handling, dilution and storage protocols, and understanding the impact of environment and, andrologists have changed their approaches to semen analysis. The technologies used today are fast developing and readily implemented in research. Semen is one of a few naturally occurring monocellular suspensions, so sperm function analysis by flow cytometry (FC) and utilization of fluorochromes is an ideal technique for high throughput, objective and accurate analysis. The complementary use of microscopical assessments by Computer-Assisted Semen Analysis (CASA), where sperm cell parameters can be objectively assessed is equally important. The objectivity and repeatability of these techniques have driven research on the function, identification of heterogeneity and fertility of the ejaculate. The wealth of knowledge obtained from the application of these powerful methods has changed our view of the spermatozoon. Although there is some application of these methods in the industry producing boar semen for artificial insemination (AI) and to eliminate sires of sub-standard semen quality, uptake of advanced methods is still slow. Instruments are becoming cheaper and technically more user friendly. Standardization of methodology and optimization of instrument settings is important for full implementation of these systems, including comparison between labs. This review provides an update on two technologies: flow cytometry and CASA for objective analysis of boar semen quality.

Use of the ACP® and BTS extenders for cooling at 15°C white-lipped peccary (Tayassu pecari) semen

ABSTRACT: Knowledge about reproduction of white-lipped peccary is of great importance to assist with the conservation of this species and enable its rational use in captivity. This study aimed to evaluate the effect of ACP-103®, ACP-116® and BTS semen extenders on sperm viability during cooling of Tayassu pecari semen. Five ejaculates from four adult males were chilled. The animals were submitted to the protocols of sedation and anesthesia for semen collection by the electroejaculation method. After collection, the semen was macro- and microscopically assessed and diluted to reach 35x106 spermatozoa/mL in each of the three different extenders tested. The fresh-extended semen was packed in a BotuFLEX® thermal box to keep samples at 15°C for 24 hours. After cooling, the following semen parameters were analyzed: sperm motility, functional and structural integrity of sperm membranes, mitochondrial activity, chromatin condensation, and the thermoresistance test was performed. The parameters sperm motility, structural and functional integrity of sperm membranes, mitochondrial activity, and chromatin condensation were preserved after use of the extenders tested, and were similar to those of in natura semen (p>0.05). Curvilinear velocity (VCL) (p<0.05) was the only parameter with reduced values after cooling regardless of the extender used. The percentage of sperm with normal morphology was greater in samples cooled using the BTS extender (p<0.05). The ACP-103®, ACP-116® and BTS extenders can be used for the cooling and preservation of white-lipped peccary semen at 15°C for 24 hours.

The effect of the staining technique on morphological and morphometric parameters of boar sperm

Sperm morphology and morphometry are important parameters in predicting fertility. Sperm are considered to be normal if the shape and size of the head, midpiece and tail fall within the classification for a given species. It is important to select the appropriate technique for staining the semen of a given species, because, as many authors have pointed out, some methods work well for one species but are not suitable for analysing another. The aim of the study was to assess the morphometric parameters of boar sperm following the use of different staining techniques and to verify the hypothesis that the staining technique affects the morphometric parameters of sperm. The staining method was found to significantly affect the dimensions of the boar sperm head. The semen stained by the SpermBlue technique had the closest morphometric sperm head parameters to those of the unstained sperm, so this technique, rather than the routinely used eosin and gentian complex, should be the leading technique in the evaluation of boar sperm morphometry. Silver nitrate staining reveals the structure of the sperm in the most detail; this method can be considered universal, and can be used independently or to supplement routine diagnostics. As the staining technique should interfere as little as possible with the structure of the sperm, while revealing its morphology in as much detail as possible, it is crucial to establish the natural dimensions of the unstained sperm head before determining the optimal technique and its reference values. The recommended or most commonly-used techniques are not always the best options for the staining and analysis of sperm of a given species.

Dependence of Sperm Morphology and Ejaculate Characteristics on Sperm Concentration in the Ejaculates of Hypor Boars

Introduction

Determination of sperm concentration and morphology in ejaculate is essential in evaluating fertility. Sperm shape and dimensions may depend on their concentration in ejaculate. The aim of the study was to evaluate the dependence of Hypor boar morphological and morphometric sperm characteristics on concentration in ejaculate.

Material and Methods

The study was conducted on 120 ejaculates from 12 Hypor boars. Depending on sperm concentration, they were put into three groups: low, medium, and high. Ejaculate sperm concentration was determined with the photometric method. Slides were prepared from semen samples which were evaluated for the morphology of spermatozoa. The preparations for morphological analyses were by the eosin-gentian staining method.

Results

As the sperm concentration in the ejaculate increased, the length, perimeter, and area of the sperm heads also did. In the ejaculates with higher sperm concentration the sperm heads were rounder. The ratios of head dimensions to tail length or total length were the highest in the sperm from ejaculates with the highest concentrations. The highest percentage of morphologically abnormal sperm was noted in ejaculates with low concentrations.

Conclusion

The dimensions and shape of sperm depend on the sperm concentration in the ejaculate. In ejaculates with the highest concentrations, the sperm have larger dimensions. Sperm concentration affects the frequency of morphological anomalies in the spermatozoa.

The use of two staining methods for identification of spermatozoon structure in roosters

Many of the methods used to stain semen result in very pronounced coloring of the sperm, but unfortunately they do not distinguish their individual structures, which play a key role in the fertilization process. Hence the aim of this study was to identify sperm structures using two staining techniques in the semen of roosters from breeding flocks. The subject of the study was the sperm of roosters from a Ross 308 breeding flock. To capture the differences in the dimensions of sperm subjected to the effect of different chemical substances in dyes, microscope slides were stained by two techniques: with an AgNO3 solution and by a differential method (eosin-nigrosin test). Assessment was made of the degree of coloration and the number of details that could be identified in the morphological structure of the sperm. The use of AgNO3 allowed accurate identification of the acrosome, nucleus, and midpiece, which were visible in the slides stained with eosin-nigrosin, but only in dead spermatozoa. The AGNO3 staining technique used in this study reveals the cell nucleus within the head and can be an alternative method to analysis with a scanning electron microscope. This staining technique can be used to stain sperm structures that cannot be seen in other methods of slide preparation, which means that it can be considered for routine use in assessing the fertility of roosters in breeder flocks.

Relationship between sperm motility characteristics and ATP concentrations, and association with fertility in two different pig breeds

Boar fertility has a major impact on overall pig reproductive efficiency. Using accurate and objective in vitro sperm variables for predicting in vivo fertility from a single ejaculate, however, is challenging. Motility is the most widely used indicator of sperm quality, and a computer assisted sperm analysis (CASA) system is now available for objective assessment of sperm motility characteristics. In this study sperm motility characteristics and semen ATP concentrations were investigated and the effect of both were evaluated on total number of piglets born (TNB) when Norwegian Landrace (NL) and Norwegian Duroc (ND) boar semen was used for AI. In addition, breed differences for semen storage capacity were investigated. The results from CASA analysis indicated there were differences between NL and ND sperm motility variables. The percentage of motile sperm cells decreased in both NL (P = 0.01) and ND (P < 0.0001) during storage. A large proportion of sperm cells with a hyperactive motility pattern were detected in ND semen on the day of collection, with no significant changes as a result of storage. Inconsistent with this finding, there was greater degree of hyper-activation in sperm motility pattern for NL because of semen storage. There was a significant decrease in semen ATP concentration during storage (P < 0.0001) in both breeds. The linearity of sperm movement at the day of collection and the wobble after storage influenced TNB in NL, while the percentage of motile cells, curvilinear velocity and lateral head amplitude on the day of semen collection and linearity after storage influenced TNB in ND.

RNA sequencing reveals candidate genes and polymorphisms related to sperm DNA integrity in testis tissue from boars

Background

Sperm DNA is protected against fragmentation by a high degree of chromatin packaging. It has been demonstrated that proper chromatin packaging is important for boar fertility outcome. However, little is known about the molecular mechanisms underlying differences in sperm DNA fragmentation. Knowledge of sequence variation influencing this sperm parameter could be beneficial in selecting the best artificial insemination (AI) boars for commercial production. The aim of this study was to identify genes differentially expressed in testis tissue of Norwegian Landrace and Duroc boars, with high and low sperm DNA fragmentation index (DFI), using transcriptome sequencing.

Results

Altogether, 308 and 374 genes were found to display significant differences in expression level between high and low DFI in Landrace and Duroc boars, respectively. Of these genes, 71 were differentially expressed in both breeds. Gene ontology analysis revealed that significant terms in common for the two breeds included extracellular matrix, extracellular region and calcium ion binding. Moreover, different metabolic processes were enriched in Landrace and Duroc, whereas immune response terms were common in Landrace only. Variant detection identified putative polymorphisms in some of the differentially expressed genes. Validation showed that predicted high impact variants in RAMP2, GIMAP6 and three uncharacterized genes are particularly interesting for sperm DNA fragmentation in boars.

Conclusions

We identified differentially expressed genes between groups of boars with high and low sperm DFI, and functional annotation of these genes point towards important biochemical pathways. Moreover, variant detection identified putative polymorphisms in the differentially expressed genes. Our results provide valuable insights into the molecular network underlying DFI in pigs.

Electronic supplementary material

The online version of this article (10.1186/s12917-017-1279-x) contains supplementary material, which is available to authorized users.

Ejaculate Traits and Sperm Morphology Depending on Ejaculate Volume in Duroc Boars

Introduction

The aim of this study was to evaluate the dependence between ejaculate traits, sperm morphology, and ejaculate volume in Duroc boars.

Material and Methods

The analysis involved 121 ejaculates collected from 12 Duroc boars kept in three artificial insemination centres located in central Poland. Ejaculates were collected manually at one-month intervals, over a period of 10 months. At least 10 ejaculates were collected from each boar. The material was divided by ejaculate volume and each ejaculate was assigned to one of three volume groups: 160 mL and lower, 161–200 mL, and 201 mL and higher. The ejaculates were assessed to identify the basic physical traits and determine the incidence of morphological abnormalities in the spermatozoa, specifying major and minor abnormalities. Furthermore, the morphological structure indices for the spermatozoa were also calculated.

Results

In large-volume ejaculates, spermatozoa were more elongated in shape, their heads were more elongated and had the largest flagella. With an increase in the ejaculate volume, sperm concentration in the ejaculate decreased. Moreover, while the total number of sperm in the ejaculate increased, the number of insemination doses obtained from a single ejaculate were higher.

Conclusion

The volume of ejaculate has little impact on the occurrence of morphological abnormalities and the size of sperm cells. Ejaculate volume is important for the shape of the sperm cells.

Current status and potential of morphometric sperm analysis

The spermatozoon is the most diverse cell type known and this diversity is considered to reflect differences in sperm function. How the diversity in sperm morphology arose during speciation and what role the different specializations play in sperm function, however, remain incompletely characterized. This work reviews the hypotheses proposed to explain sperm morphological evolution, with a focus on some aspects of sperm morphometric evaluation; the ability of morphometrics to predict sperm cryoresistance and male fertility is also discussed. For this, the evaluation of patterns of change of sperm head morphometry throughout a process, instead of the study of the morphometric characteristics of the sperm head at different stages, allows a better identification of the males with different sperm cryoconservation ability. These new approaches, together with more studies employing a greater number of individuals, are needed to obtain novel results concerning the role of sperm morphometry on sperm function. Future studies should aim at understanding the causes of sperm design diversity and the mechanisms that generate them, giving increased attention to other sperm structures besides the sperm head. The implementation of scientific and technological advances could benefit the simultaneous examination of sperm phenotype and sperm function, demonstrating that sperm morphometry could be a useful tool for sperm assessment.

Importance of sperm morphology during sperm transport and fertilization in mammals

After natural or artificial insemination, the spermatozoon starts a journey from the site of deposition to the place of fertilization. However, only a small subset of the spermatozoa deposited achieves their goal: to reach and fertilize the egg. Factors involved in controlling sperm transport and fertilization include the female reproductive tract environment, cell-cell interactions, gene expression, and phenotypic sperm traits. Some of the significant determinants of fertilization are known (i.e., motility or DNA status), but many sperm traits are still indecipherable. One example is the influence of sperm dimensions and shape upon transport within the female genital tract towards the oocyte. Biophysical associations between sperm size and motility may influence the progression of spermatozoa through the female reproductive tract, but uncertainties remain concerning how sperm morphology influences the fertilization process, and whether only the sperm dimensions per se are involved. Moreover, such explanations do not allow the possibility that the female tract is capable of distinguishing fertile spermatozoa on the basis of their morphology, as seems to be the case with biochemical, molecular, and genetic properties. This review focuses on the influence of sperm size and shape in evolution and their putative role in sperm transport and selection within the uterus and the ability to fertilize the oocyte.

Identification of sperm morphometric subpopulations in cooled-stored canine sperm and its relation with sperm DNA integrity

The aims of this study were to (i) identify different morphometric subpopulations in cooled-stored canine sperm and their patterns of distribution during cool-storage for up to 240 hr and (ii) determine whether or not morphometric sperm subpopulations (sP) are related to sperm DNA integrity. For that purpose, morphometric parameters were analysed by computer-assisted sperm analysis (CASA) and sperm DNA fragmentation (sDFi) using the sperm Halomax test. Four morphometric sperm heads subpopulations were identified: sP1 (large and rounded), sP2 (large and elongated), sP3 (small and rounded) and sP4 (small and elongated). sP1 was the most predominant subpopulation for up to 72 hr and thereafter sP3 increased progressively. sDFi increased after 48 hr of cool-storage. Although sP3 showed a positive correlation with sDFi, and both increased over time, it could not be ensured that only the sperm with fragmented DNA are accumulated in sP3. In conclusion, sP3 and DNA fragmentation increased progressively during cool-storage, becoming possible indicators of sperm damage. However, it cannot be concluded that sP3 only contains sperm with fragmented DNA.

Is intracouple assisted reproductive technology an option for men with large-headed spermatozoa? A literature review and a decision guide proposal

Although the presence of spermatozoa with an abnormally large head is rare, it is associated with low fertility or even total infertility. We reviewed the literature on assisted reproductive technology (ART) strategies and outcomes for men with large-headed spermatozoa. We also discuss additional analyses that can usefully characterize sperm defects and help with the choice between intra-couple ART and insemination with donor sperm. Lastly, we propose a classification for cases of large-headed spermatozoa.

Towards microfluidic sperm refinement: impedance-based analysis and sorting of sperm cells

The use of high quality semen for artificial insemination in the livestock industry is essential for successful outcome. Insemination using semen with a high number of sperm cells containing morphological defects has a negative impact on fertilization outcome. Therefore, semen with a high number of these abnormal cells is discarded in order to maintain high fertilization potential, resulting in the loss of a large number of morphologically normal sperm cells (up to 70-80% of original sample). A commonly occurring morphological sperm anomaly is the cytoplasmic droplet on the sperm flagella. Currently, no techniques are available to extract morphologically normal sperm cells from rejected samples. Therefore, we aim to develop a microfluidic setup which is able to detect and sort morphologically normal sperm cells label-free and non-invasively. In a proof-of-concept experiment, differential impedance measurements were used to detect the presence of cytoplasmic droplets on sperm flagella, which was quantified by calculating the area under the curve (AUC) of the corresponding impedance peaks. A receiver operating characteristic curve of this electrical analysis method showed the good predictive power of this analysis method (AUC value of 0.85). Furthermore, we developed a label-free cell sorting system using LabVIEW, which is capable of sorting sperm cells based on impedance. In a proof-of-concept experiment, sperm cells and 3 μm beads were sorted label-free and non-invasively using impedance detection and dielectrophoresis sorting. These experiments present our first attempt to perform sperm refinement using microfluidic technology.

The effect of selected staining techniques on bull sperm morphometry

Sperm morphometry has some value as an indicator of reproductive capacity in males. In laboratory practice a variety of slide-staining methods are used during morphological evaluation of semen to predict male fertility. The aim of this study was to determine the effect of staining of semen using four different techniques on the morphometry of the bull sperm cell. The material for the study consisted of semen collected from test bulls of the Black-and-White variety of Holstein-Friesians. The results obtained in the study indicate differences in the dimensions of bull sperm heads when different slide staining techniques were used. The most similar results for sperm head dimensions were obtained in the case of SpermBlue(®) and eosin+gentian violet complex, although statistically significant differences were found between all the staining techniques. Extreme values were noted for the other staining techniques - lowest for the Papanicolaou and highest for silver nitrate, which may indicate more interference in the cell by the reagents used in the staining process. However, silver nitrate staining was best at identifying the structures of the sperm cell. Hence it is difficult to determine which of the staining methods most faithfully reveals the dimensions and shape of the bull sperm.

Microfluidic single sperm entrapment and analysis

Selection of healthy spermatozoa is of crucial importance for the success rates of assisted reproduction technologies (ART) such as in vitro fertilization and intra-cytoplasmic sperm injection. Although sperm selection for ART procedures is predominantly based on sperm motility, successful fertilization is not predicted by good motility alone. For example, sperm characteristics such as the acrosome state and DNA integrity have shown significant impact on ART outcome. Although fertilization can be achieved with a single spermatozoon of high quality, current quality assessments are population-based and do not allow investigation of multiple sperm characteristics on a single spermatozoon simultaneously. In order to study sperm cells on the single cell level, we designed and characterized a PDMS microfluidic platform that allows single sperm entrapment. After spatially confining individual sperm cells within microfluidic cell traps, the cell viability, chromosomal content and acrosome state were studied. This platform is suitable for the analysis of individual sperm cells, which could be exploited for (non-invasive) sperm analysis and selection by impedance or Raman spectroscopy.

DNA fragmentation and sperm head morphometry in cat epididymal spermatozoa

Sperm DNA fragmentation is an important parameter to assess sperm quality and can be a putative fertility predictor. Because the sperm head consists almost entirely of DNA, subtle differences in sperm head morphometry might be related to DNA status. Several techniques are available to analyze sperm DNA fragmentation, but they are labor-intensive and require expensive instrumentations. Recently, a kit (Sperm-Halomax) based on the sperm chromatin dispersion test and developed for spermatozoa of different species, but not for cat spermatozoa, became commercially available. The first aim of the present study was to verify the suitability of Sperm-Halomax assay, specifically developed for canine semen, for the evaluation of DNA fragmentation of epididymal cat spermatozoa. For this purpose, DNA fragmentation indexes (DFIs) obtained with Sperm-Halomax and terminal deoxynucleotidyl transferase-mediated nick-end labeling (TUNEL) were compared. The second aim was to investigate whether a correlation between DNA status, sperm head morphology, and morphometry assessed by computer-assisted semen analysis exists in cat epididymal spermatozoa. No differences were observed in DFIs obtained with Sperm-Halomax and TUNEL. This result indicates that Sperm-Halomax assay provides a reliable evaluation of DNA fragmentation of epididymal feline spermatozoa. The DFI seems to be independent from all the measured variables of sperm head morphology and morphometry. Thus, the evaluation of the DNA status of spermatozoa could effectively contribute to the completion of the standard analysis of fresh or frozen semen used in assisted reproductive technologies.

Comparative analysis of Duroc and Pietrain boar sperm morphology

The aim of this study was to compare ejaculates of Duroc and Pietrain boars in terms of sperm morphology characteristics. Analysis was performed on 116 ejaculates collected from 6 Duroc boars and 9 Pietrain boars. The boars selected for examination were young and at the beginning of their reproductive utilization. Ejaculates were collected at monthly intervals over the period of 10 months. Microscopic slides were prepared immediately after collection of ejaculates. The slides were examined to assess the frequency of morphological abnormalities. Moreover, morphometric measurements were taken from 15 randomly selected morphologically normal spermatozoa. Also, conventional evaluation of ejaculates was made following methods used at Polish sow insemination centres. Differences were found in the dimensions and shape between Duroc and Pietrain spermatozoa. Pietrain spermatozoa were characterised by significantly smaller head perimeter compared with Duroc (P ≤ 0.01). Moreover, Pietrain spermatozoa tails were by 0.8 μm longer (P ≤ 0.01), and their total sperm length was greater by 0.5 μm compared to Duroc (P ≤ 0.05) sperm. The volume of Duroc ejaculates was lower but their sperm concentration was greater. The results of the present study contribute to scientific progress as they demonstrate differences in sperm size between boars of different breeds, which may be reflected in different reproductive performances of the boars.

Effect of sperm concentration in an ejaculate on morphometric traits of spermatozoa in Duroc boars

The experimental material consisted of 75 ejaculates collected form 8 Duroc boars. The ejaculates were divided into three groups according to sperm concentration in an ejaculate. An ejaculate was obtained from each boar monthly and it was used to make microscopic preparations to examine spermatozoa morphology. In each preparation morphometric measurements were taken of fifteen randomly selected spermatozoa characterized by normal morphology. The following measurements of spermatozoa were taken: length and width of the spermatozoa head, head area, length of the flagellum, perimeter of the spermatozoon head and total spermatozoon length. The results were used to calculate indicators of spermatozoa morphology. Moreover, assessments were made of frequency of morphological defects to isolate spermatozoa with primary and secondary abnormalities following the Blom classification system. It was found that the concentration of spermatozoa in the ejaculate influenced the morphometric characteristics of spermatozoa. Ejaculates with low sperm concentrations are characterized by larger spermatozoa as compared to ejaculates with high sperm concentrations. However, sperm concentration in the ejaculate does not much influence the shape of spermatozoa.