Nanocell hybrids for green chemistry

Ultrathin silica-tiling on living cells for chemobiotic catalysis

Harnessing the power of cell biocatalysis for sustainable chemical synthesis requires rational integration of living cells with the modern synthetic catalysts. Here, we develop silica-tiling strategy that constructs a hierarchical, inorganic, protocellular confined nanospace around the individual living cell to accommodate molecularly accessible abiotic catalytic sites. This empowers the living microorganisms for new-to-nature chemical synthesis without compromising the cellular regenerative process. Yeast cell, a widely used biocatalyst, is upgraded via highly controlled self-assembly of 2D-bilayer silica-based catalytic modules on cell surfaces, opening the avenues for diverse chemobiotic reactions. For example, combining [AuPt]-catalyzed NADH regeneration, light-induced [Pd]-catalyzed C-C cross-coupling or lipase-catalyzed esterification reactions-with the natural ketoreductase activity inside yeast cell. The conformal silica bilayer provides protection while allowing proximity to catalytic sites and preserving natural cell viability and proliferation. These living nanobiohybrids offer to bridge cell's natural biocatalytic capabilities with customizable heterogeneous metal catalysis, enabling programmable reaction sequences for sustainable chemical synthesis.

Bismuth-Doped Carbon Dots Decorated Escherichia coli for Enhanced Hydrogen Production

Photosynthetic inorganic biohybrid systems (PBSs) combining an inorganic photosensitizer with intact living cells provide an innovative view for solar hydrogen production. However, typical whole-cell biohybrid systems often suffer from sluggish electron transfer kinetics during transmembrane diffusion, which severely limits the efficiency of solar hydrogen production. Here, a unique biohybrid system with a quantum yield of 8.42% was constructed by feeding bismuth-doped carbon dots (Bi@CDS) to Escherichia coli (E. coli). In this biohybrid system, Bi@CDS can enter the cells and transfer the electrons upon light irradiation, greatly reducing the energy loss and shortening the distance of electron transfer. More importantly, the photocatalytic hydrogen production of the E. coli-Bi@CDs biohybrid system reached up to 0.95 mmol within 3 h under light irradiation (420-780 nm, 2000 W m-2), which is 1.36 and 2.38 times higher than that in the E. coli-CDs biohybrid system and the E. coli system, respectively. In addition, the mechanism of enhanced hydrogen production was further explored. It was found that the accelerated decomposition of glucose, the accelerated production of pyruvate, the inhibition of lactic acid, and the increase of formic acid were the reasons for the increase of hydrogen production. This work provides a novel strategy for improving the hydrogen production in photosynthetic inorganic biohybrid systems.

External Electrons Directly Stimulate Escherichia coli for Enhancing Biological Hydrogen Production

External electric field has the potential to influence metabolic processes such as biological hydrogen production in microorganisms. Based on this concept, we designed and constructed an electroactive hybrid system for microbial biohydrogen production under an electric field comprised of polydopamine (PDA)-modified Escherichia coli (E. coli) and Ni foam (NF). In this system, electrons generated from NF directly migrate into E. coli cells to promote highly efficient biocatalytic hydrogen production. Compared to that generated in the absence of electric field stimulation, biohydrogen production by the PDA-modified E. coli-based system is significantly enhanced. This investigation has demonstrated the mechanism for electron transfer in a biohybrid system and gives insight into precise basis for the enhancement of hydrogen production by using the multifield coupling technology.

Fabricating pentaazatetraethylene modified sulfonated polyacrylamide for dye adsorption from aqueous media: isotherms and kinetics models

In this study, pentaazatetraethylene-modified sulfonated polyacrylamide (PAm-SO3-N5) was synthesized and used as a novel efficient adsorbent to remove calmagite from aqueous media. To this end, a central composite design (CCD) was applied to reduce the number of reaction variables (i.e., adsorbent concentration, temperature, initial concentration, and pH) on calmagite removal. The results showed that calmagite was entirely adsorbed by the PAm-SO3-N5 within 30 min. In addition, a pseudo-second-order (PSO) model was prepared as the optimum formula to fit the kinetics information. The modeling results revealed that film diffusion and adsorption are rate-limiting stages to remove the dyes. Using a Langmuir isotherm to fit the equilibrium data, the highest equilibrium adsorption was calculated to be 1732.5 mg/g. In the present study, the ΔH value indicates that the adsorption is of chemical type. Also, the negative sign of ΔS° shows that PAm-SO3-N5 removes calmagite during a relatively stable process with randomness in the system. The increase in ΔG° values with increasing temperature indicates a descending trend in the feasibility degree of calmagite adsorption. Eventually, recycling the adsorbent for 7 cycles to adsorb calmagite dye showed no remarkable activity loss.

A Micrometric Transformer: Compositional Nanoshell Transformation of Fe3+ -Trimesic-Acid Complex with Concomitant Payload Release in Cell-in-Catalytic-Shell Nanobiohybrids

Nanoencapsulation of living cells within artificial shells is a powerful approach for augmenting the inherent capacity of cells and enabling the acquisition of extrinsic functions. However, the current state of the field requires the development of nanoshells that can dynamically sense and adapt to environmental changes by undergoing transformations in form and composition. This paper reports the compositional transformation of an enzyme-embedded nanoshell of Fe3+ -trimesic acid complex to an iron phosphate shell in phosphate-containing media. The cytocompatible transformation allows the nanoshells to release functional molecules without loss of activities and biorecognition, while preserving the initial shell properties, such as cytoprotection. Demonstrations include the lysis and killing of Escherichia coli by lysozyme, and the secretion of interleukin-2 by Jurkat T cells in response to paracrine stimulation by antibodies. This work on micrometric Transformers will benefit the creation of cell-in-shell nanobiohybrids that can interact with their surroundings in active and adaptive ways.

"3-in-1" Hybrid Biocatalysts: Association of Yeast Cells Immobilized in a Sol-Gel Matrix for Determining Sewage Pollution

This study presents a novel ″3-in-1″ hybrid biocatalyst design that combines the individual efficiency of microorganisms while avoiding negative interactions between them. Yeast cells of Ogataea polymorpha VKM Y-2559, Blastobotrys adeninivorans VKM Y-2677, and Debaryomyces hansenii VKM Y-2482 were immobilized in an organosilicon material by using the sol-gel method, resulting in a hybrid biocatalyst. The catalytic activity of the immobilized microorganism mixture was evaluated by employing it as the bioreceptor element of a biosensor. Optical and scanning electron microscopies were used to examine the morphology of the biohybrid material. Elemental distribution analysis confirmed the encapsulation of yeast cells in a matrix composed of methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) (85 and 15 vol %, respectively). The resulting heterogeneous biocatalyst exhibited excellent performance in determining the biochemical oxygen demand (BOD) index in real surface water samples, with a sensitivity coefficient of 50 ± 3 × 10-3·min-1, a concentration range of 0.3-31 mg/L, long-term stability for 25 days, and a relative standard deviation of 3.8%. These findings demonstrate the potential of the developed hybrid biocatalyst for effective pollution monitoring and wastewater treatment applications.

Microalgae-material hybrid for enhanced photosynthetic energy conversion: a promising path towards carbon neutrality

Photosynthetic energy conversion for high-energy chemicals generation is one of the most viable solutions in the quest for sustainable energy towards carbon neutrality. Microalgae are fascinating photosynthetic organisms, which can directly convert solar energy into chemical energy and electrical energy. However, microalgal photosynthetic energy has not yet been applied on a large scale due to the limitation of their own characteristics. Researchers have been inspired to couple microalgae with synthetic materials via biomimetic assembly and the resulting microalgae-material hybrids have become more robust and even perform new functions. In the past decade, great progress has been made in microalgae-material hybrids, such as photosynthetic carbon dioxide fixation, photosynthetic hydrogen production, photoelectrochemical energy conversion and even biochemical energy conversion for biomedical therapy. The microalgae-material hybrid offers opportunities to promote artificially enhanced photosynthesis research and synchronously inspires investigation of biotic-abiotic interface manipulation. This review summarizes current construction methods of microalgae-material hybrids and highlights their implication in energy and health. Moreover, we discuss the current problems and future challenges for microalgae-material hybrids and the outlook for their development and applications. This review will provide inspiration for the rational design of the microalgae-based semi-natural biohybrid and further promote the disciplinary fusion of material science and biological science.

Pt-C interactions in carbon-supported Pt-based electrocatalysts

Carbon-supported Pt-based materials are highly promising electrocatalysts. The carbon support plays an important role in the Pt-based catalysts by remarkably influencing the growth, particle size, morphology, dispersion, electronic structure, physiochemical property and function of Pt. This review summarizes recent progress made in the development of carbon-supported Pt-based catalysts, with special emphasis being given to how activity and stability enhancements are related to Pt-C interactions in various carbon supports, including porous carbon, heteroatom doped carbon, carbon-based binary support, and their corresponding electrocatalytic applications. Finally, the current challenges and future prospects in the development of carbon-supported Pt-based catalysts are discussed.

Physicochemical and Antibacterial Evaluation of TiO2/CNT Mesoporous Nanomaterials Prepared by High-Pressure Hydrothermal Sol-Gel Method under an Ultrasonic Composite Environment

TiO₂ has attracted significant research interest, principally due to its nontoxicity, high stability, and abundance. Carbon-doped TiO₂ can improve light absorption efficiency. In order to prepare high-efficiency photocatalysts, carbon-doped composites were prepared by hydrothermal reaction in a high-pressure reactor, and then TiO₂/CNT mesoporous composites were prepared by the sol-gel method in an ultrasonic environment. Characterized by SEM and TEM, the composite materials contained TiO₂ nanoparticles as well as CNT. After phase analysis, it was the anatase-doped phase. The following infrared light absorption performance and Escherichia coli bactericidal performance tests showed that it had better infrared and visible light absorption performance than pure TiO₂. The TiO₂/CNT mesoporous nanomaterials synthesized in this work are possible for clean industrial productions.

Interfacial design for detection of a few molecules

Major advances in molecular detection are being driven by goals associated with the development of methods that are amenable to miniaturization and automation, and that have high sensitivity and low interference. The new detection methods are confronted by many interfacial issues, which when properly addressed can lead to improved performance. One interfacial property, special wettability, can facilitate precise delivery and local enrichment of molecules to sensing elements. This review summarizes applications of unique features of special wettability in molecular detection including (1) chemical and electrochemical reactions in anchored microdroplets on superwetting surfaces, (2) enrichment of analytes and active materials at low contact areas between droplets and superwetting surfaces, (3) complete opposite affinities of superwetting surfaces toward nonpolar/polar solutes and oil/water phases, and (4) directional droplet transportation on asymmetric superwetting surfaces. The challenges and opportunities that exist in design and applications of special wettability in interfacial delivery and enrichment for detection of a few molecules are also discussed.

A Semiconductor Biohybrid System for Photo-Synergetic Enhancement of Biological Hydrogen Production

CdS nanoparticles were introduced on E. coli cells to construct a hydrogen generating biohybrid system via the biointerface of tannic acid-Fe complex. This hybrid system promotes good biological activity in a high salinity environment. Under light illumination, the as-synthesized biohybrid system achieves a 32.44 % enhancement of hydrogen production in seawater through a synergistic effect.