Three phase partitioning for extraction of oil: A review

Simultaneous Extraction of Oil and Protein from Silkworm (Bombyx mori L.) Pupae (Lueng Parroj var.) and Their In Vitro Skin Moisturization

Oil and protein from silkworm (Bombyx mori var. Leung Pairoj) pupae, by-product from sericulture, were extracted and evaluated for their potential uses as skin biomoisturizer. The silkworm pupae (SWP) oil and protein were simultaneously extracted by using three-phase partitioning (TPP) method and determined for their physicochemical properties including fatty acid and amino acid content, respectively. The highest yields of oil and protein at 8.24 ± 0.21% and 8.41 ± 0.26% w/w, respectively were obtained from 18 h extraction. Fatty acid analysis of SWP oil was rich in linolenic acid (37.81 ± 0.34%), oleic acid (28.97 ± 0.13%), palmitic acid (21.27 ± 0.05%), stearic acid (6.60 ± 0.09%) and linoleic acid (4.73 ± 0.21%). The clear yellow SWP oil possessed saponification value of 191.51 mg/g, iodine value of 119.37 g I2/g and peroxide value of 2.00 mg equivalent O2/kg. The SWP protein composed of 17 amino acids which aspartic acid, glutamic acid, glycine and serine were the major residues. SDS-PAGE analysis revealed that the SWP protein consisted of distinct protein at around 51, 70, 175 and over 175 kDa. Cytotoxicity of the SWP oil and protein was evaluated by using MTT assay and they showed low cytotoxicity toward keratinocyte cell (HaCat cell line). The SWP oil provided moisturizing effect on pig skin comparable to olive oil, while 1% and 2% of SWP protein showed higher moisturizing efficacy than 3% hydrolyzed collagen. The study indicated that the SWP oil and protein could be potential biomoisturizers for cosmetic products.

Integrated strategies for enzyme assisted extraction of bioactive molecules: A review

Conventional methods of extracting bioactive molecules are gradually losing pace due to their numerous disadvantages, such as product degradation, lower efficiency, and toxicity. Thus, in light of the rising demand for these bioactive, enzymes have garnered much attention for their efficiency in extraction. However, enzyme-assisted extraction is also plagued with a high capital cost that cannot justify the extraction yields obtained. In order to mitigate these problems, enzyme-assisted extraction can be consorted with non-conventional methods. This review includes current progress concerning the combined approaches while converging the recent advancements in the field that outperformed conventional extraction processes. It also highlights the design of biocatalyst and key parameters involved in the effective extraction of bioactive molecules. An integrated approach for efficiently extracting polyphenols, essential oils, pigments, and vitamins has been comprehensively reviewed. Furthermore, the different immobilization strategies have been discussed for large-scale implementation of enzymes for extraction. The integration of advanced non-conventional methods with enzyme-assisted extraction will open new avenues to enhance the overall extraction efficiency.

Three-liquid-phase salting-out extraction of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA)-rich oils from Euphausia superba

The TLPSOES parameters were optimized by response surface methodology using Box-Behnken design, which were 16.5% w/w of ammonium citrate, 17.5% w/w of ethanol, and 46% w/w of n-hexane at 70 min of stirring time. Under optimized conditions the extraction efficiency attained was 90.91 ± 0.97% of EPA, 90.02 ± 1.04% of DHA, and 91.85 ± 1.11% of KO in the top n-hexane phase. The highest extraction efficiency of proteins and flavonoids, i.e. 88.34 ± 1.35% and 79.67 ± 1.13%, was recorded in the solid interface and ethanol phase, respectively. The KO extracted by TLPSOES system consisted of lowest fluoride level compared to the conventional method and whole wet krill biomass. The TLPSOES is a potential candidate for nutraceutical industry of KO extraction from wet krill biomass.

Extraction of total antioxidants from Azadirachta indica (neem) using three phase partitioning and its process intensification using ultrasound

The majority of the naturally occurring antioxidants are obtained from plant sources. The antioxidant activity is mostly exhibited by polyphenols present in the plant cells. Azadirachta Indica (Neem) leaves are renowned for their medicinal applications due to their anti-inflammatory, antimalarial, antifungal, antibacterial, antiviral, antioxidant, and anticarcinogenic properties. This work aims to optimize the extraction of Azadirachta Indica (Neem) leaf antioxidants using three-phase partitioning (TPP). The optimized conditions are operating time 15 minutes, slurry ratio 1:30 (g/mL), salt concentration 30% (w/v), aqueous to solvent ratio 1:1.5 (v/v), and stirring speed 400 rpm that infer 74.66% extraction yield. Additionally, ultrasonic pretreatment was also employed to increase the extraction yield up to 86.61%. Sonication pretreatment for 4 min operated at 30 W power, and 75% duty cycle was observed to offer maximum antioxidant extraction about 3.3 mg/g.

Liquid triphasic systems as sustainable downstream processing of Chlorella sp. biorefinery for potential biofuels and feed production

Microalgae are potential sustainable renewable sources of energy but are highly underutilized due to the expensive and time-consuming downstream processing. This study aims at curbing these obstacles by extracting multiple components with a single processing unit. In this work, an ultrasound-assisted liquid triphasic flotation system was incorporated to extract proteins, lipids, and carbohydrates by phase separation. The parameters involved were optimized and the final recovery efficiency of proteins, lipids, and carbohydrates was determined. A control run involving conventional three-phase partitioning and a 15-fold scale-up system with the recycling of phase components were also performed. Gas Chromatograph and Fourier Transform Infrared spectroscopy were used to examine the potential of extracted products as a source of biofuel. This biorefinery approach is crucial in commercializing microalgae for biodiesel and bioethanol generation with a side product of purified proteins as feed.

Biorefinery of Chlorella sorokiniana using ultra sonication assisted liquid triphasic flotation system

The aim of this work was to study the ultrasonication-assisted Liquid Tri-phasic Flotation (LTF) System to obtain lipid and protein from microalgae Chlorella sorokiniana in a single step as a novel process. In the current study, biorefinery of Chlorella sorokiniana was performed using LTF system in a single step. The highest protein recovery of 97.43 ± 1.67% and lipid recovery of 69.50 ± 0.54% were obtained. The corresponding parameters were microalgae biomass loading of 0.5 w/v%, ammonium sulphate concentration of 40 w/v%, volume ratio of 1:1.5 (salt:alcohol), ultrasonication pulse mode of 20 s ON/20 s OFF at 20% amplitude for 5 mins, flotation air flowrate of 100 mL/min. Additionally, recycling of alcohol phase to study the circular nature of proposed biorefinery was investigated. The proposed LTF system for extraction of proteins and lipid reduces the number of operation units required in this biorefinery approach.

Comparative study of ultrasonic pretreatment and ultrasound assisted three phase partitioning for extraction of custard apple seed oil

Custard apple seed oil is a marketable product extracted from custard apple seed which is a potential agriculture waste. The present work aims to elucidate simultaneous extraction of the custard apple seed oil and proteins using three phase partitioning (TPP). The efficient oil extraction was executed by optimization of parameters including time, slurry ratio, salt concentration, and slurry to t-butanol ratio. Additionally, the application of ultrasound as process intensification tool for TPP was studied that reduces the time of conventional TPP and increases the yield by 2.53%. The work also comprises a comparative study of two modes of ultrasound application, namely ultrasound pre-treatment and simultaneous ultrasound assisted TPP. This work proves ultrasonic pre-treatment followed by TPP as a superior mode of ultrasound application that attributes 33.6 ± 0.56% (w/w) oil extraction with optimized pre-treatment time of 150 s, 30 W ultrasound power and 75% duty cycle. Extraction kinetics studied for conventional, Ultrasound assisted Three Phase Partitioning (UTPP), and Ultrasound Pre-treatment assisted Three Phase Partitioning (UPTPP) were observed to fit Peleg's model.

Enzyme-assisted three-phase partitioning: An efficient alternative for oil extraction from Sesame (<em>Sesamum indicum</em> L.)

Three-phase partitioning (TPP) was explored for oil extraction from Sesamum indicum L. seeds. The process parameters, namely the salt concentration, slurry/t-butanol ratio and system pH were standardized. The optimum conditions for maximum oil recovery using TPP were an ammonium sulphate concentration of 40% (w/v), slurry/t-butanol ratio of 1:1 (v/v) and system pH of 5.0. The powdered seeds were subjected to enzyme-assisted three-phase partitioning (EATPP) which was pre-treated with pectinase, protease and a mixture of ɑ-amylase and amylo-glucosidase (1:1 ratio) followed by TPP (as standardized conditions) and its efficacy in recovering oil was compared with TPP and solvent extraction (SE). Out of all the enzymes studied, EATPP with pectinase resulted in the highest oil recovery (86.12%), which was higher than that of TPP (78.24%). The free fatty acids, saponification value and peroxide values were observed to be lower in the case of TPP and EATPP when compared to SE, indicating better oil quality.

Sono-physical and sono-chemical effects of ultrasound: Primary applications in extraction and freezing operations and influence on food components

Ultrasound is an advanced non-thermal food-processing technology that has received increasing amounts of interest as an alternative to, or an adjuvant method for, conventional processing techniques. This review explores the sono-physical and sono-chemical effects of ultrasound on food processing as it reviews two typical food-processing applications that are predominantly driven by sono-physical effects, namely ultrasound-assisted extraction (UAE) and ultrasound-assisted freezing (UAF), and the components modifications to food matrices that can be triggered by sono-chemical effects. Efficiency enhancements and quality improvements in products (and extracts) using ultrasound are discussed in terms of mechanism and principles for a range of food-matrix categories, while efforts to improve existing ultrasound-assist patterns was also seen. Furthermore, the progress of experimental ultrasonic equipments for UAE and UAF as food-processing technologies, the core of the development in food-processing techniques is considered. Moreover, sono-chemical reactions that are usually overlooked, such as degradation, oxidation and other particular chemical modifications that occur in common food components under specific conditions, and the influence on bioactivity, which was also affected by food processing to varying degrees, are also summarised. Further trends as well as some challenges for, and limitations of, ultrasound technology for food processing, with UAE and UAF used as examples herein, are also taken into consideration and possible future recommendations were made.

Comparison of Conventional and Sustainable Lipid Extraction Methods for the Production of Oil and Protein Isolate from Edible Insect Meal

Edible insects represent an interesting alternative source of protein for human consumption but the main hurdle facing the edible insect sector is low consumer acceptance. However, increased acceptance is anticipated when insects are incorporated as a processed ingredient, such as protein-rich powder, rather than presented whole. To produce edible insect fractions with high protein content, a defatting step is necessary. This study investigated the effects of six defatting methods (conventional solvents, three-phase partitioning, and supercritical CO₂) on lipid extraction yield, fatty profiles, and protein extraction and purification of house cricket (Acheta domesticus) and mealworm (Tenebrio molitor) meals. Ethanol increased the lipid extraction yield (22.7%–28.8%), irrespective of the insect meal used or the extraction method applied. Supercritical CO₂ gave similar lipid extraction yields as conventional methods for Tenebrio molitor (T. molitor) (22.1%) but was less efficient for Acheta domesticus (A. domesticus) (11.9%). The protein extraction yield ranged from 12.4% to 38.9% for A.domesticus, and from 11.9% to 39.3% for T. molitor, whereas purification rates ranged from 58.3% to 78.5% for A. domesticus and from 48.7% to 75.4% for T. molitor.

Enhanced isolation of lipids from microalgal biomass with high water content for biodiesel production

In present study, lipids were extracted from unbroken microalga Chlorella vulgaris with high water content (50% microalgal solution) through three-phase partitioning (TPP). The method was found to extract around 15.9% of total lipid transformable to methyl esters (LTMEs) from unbroken microalgal cells which is two times of Bligh and Dyer method. We investigated the effects of various parameters on TPP performance and were optimised through response surface methodology. The results indicated that incubation duration, temperature and extraction time were positively correlated with LTME extraction efficiency. The optimum temperature was 60 °C, incubation duration was 120 min, extraction time was 60 min, ratio of solvent to DKP was 1:1. The FAME yield was calculated as 12.05% and major fatty acids together accounted for 71.33% which indicated the great potential of the proposed lipid extraction procedure for microalga-based biodiesel production.

Impact of the Mode of Extraction on the Lipidomic Profile of Oils Obtained from Selected Amazonian Fruits

Oils and fats are important raw materials in food products, animal feed, cosmetics, and pharmaceuticals among others. The market today is dominated by oils derive, d from African palm, soybean, oilseed and animal fats. Colombia's Amazon region has endemic palms such as Euterpe precatoria (açai), Oenocarpus bataua (patawa), and Mauritia flexuosa (buriti) which grow in abundance and produce a large amount of ethereal extract. However, as these oils have never been used for any economic purpose, little is known about their chemical composition or their potential as natural ingredients for the cosmetics or food industries. In order to fill this gap, we decided to characterize the lipids present in the fruits of these palms. We began by extracting the oils using mechanical and solvent-based approaches. The oils were evaluated by quantifying the quality indices and their lipidomic profiles. The main components of these profiles were triglycerides, followed by diglycerides, fatty acids, acylcarnitine, ceramides, ergosterol, lysophosphatidylcholine, phosphatidyl ethanolamine, and sphingolipids. The results suggest that solvent extraction helped increase the diglyceride concentration in the three analyzed fruits. Unsaturated lipids were predominant in all three fruits and triolein was the most abundant compound. Characterization of the oils provides important insights into the way they might behave as potential ingredients of a range of products. The sustainable use of these oils may have considerable economic potential.

Lipid extraction from wet Nannochloropsis biomass via enzyme-assisted three phase partitioning

A green and efficient enzyme assisted three phase partitioning (EA-TPP) process was firstly developed to extract microalgal lipids using wet Nannochloropsis sp. biomass. In the pretreatment of microalgal biomass by four hydrolytic enzymes, TPP obtained a higher TFAs lipid extraction efficiency by cellulase compared with the resting enzymes. After optimization by EA-TPP of the wet disrupted Nannochloropsis biomass (3 g), the maximum TFAs extraction yield (90.40%) was attained at 20% ammonium sulphate, 6-7 pH, 1:2 slurry/tert-butanol ratio and 70 °C for 2 h incubation time and two extraction cycles. Moreover, results also revealed that the lipidic species compositions of Nannochloropsis sp. biomass were greatly related with the EA-TPP parameters. In the laboratory scale for wet disrupted microalgae biomass, EA-TPP process achieved 88.70% TFAs extraction yield under the optimized conditions. In all, EA-TPP process could be a promising approach to extract microalgae lipids for food application using wet microalgae biomass.