A review: Reverse approach to analyze the impact of starch modification on the inflation and gas holding properties of wheat-based matrices

Heat-moisture treatment can modulate all-purpose wheat flour for short dough biscuit making: Evidences and mechanism

In view of the merits of all-purpose wheat flour (APWF) to soft wheat flour (SWF) in cost and protein supply, the feasibility of heat-moisture treatment (HMT, 19% moisture for 1 h at 60, 80 and 100 °C, respectively) to modify APWF as a substitute SWF in making short dough biscuits was explored. For underlying mechanisms, on the one hand, HMT reduced the hydration capacity of damaged starch particles by coating them with denatured proteins. On the other hand, HMT at 80 °C and 100 °C significantly denatured gluten proteins to form protein aggregates, highly weakening the gluten network in dough. These two aspects jointly conferred APWF dough with higher deformability and therefore significantly improved the qualities of biscuits. Moreover, the qualities of biscuits from APWF upon HMT-100 °C were largely comparable to that from SWF, even higher values were concluded in spread ratio, volume, specific volume and consumer acceptance.

Improvement on wheat bread quality by in situ produced dextran-A comprehensive review from the viewpoint of starch and gluten

Deterioration of bread quality, characterized by the staling of bread crumb, the softening of bread crust and the loss of aroma, has caused a huge food waste and economic loss, which is a bottleneck restriction to the development of the breadmaking industry. Various bread improvers have been widely used to alleviate the issue. However, it is noteworthy that the sourdough technology has emerged as a pivotal factor in this regard. In sourdough, the metabolic breakdown of carbohydrates, proteins, and lipids leads to the production of exopolysaccharides, organic acids, aroma compounds, or prebiotics, which contributes to the preeminent ability of sourdough to enhance bread attributes. Moreover, sourdough exhibits a "green-label" feature, which satisfies the consumers' increasing demand for additive-free food products. In the past two decades, there has been a significant focus on sourdough with in situ produced dextran due to its exceptional performance. In this review, the behaviors of bread crucial compositions (i.e., starch and gluten) during dough mixing, proofing, baking and bread storing, as well as alterations induced by the acidic environment and the presence of dextran are systemically summarized. From the viewpoint of starch and gluten, results obtained confirm the synergistic amelioration on bread quality by the coadministration of acidity and dextran, and also highlight the central role of acidification. This review contributes to establishing a theoretical foundation for more effectively enhancing the quality of wheat breads through the application of in situ produced dextran.

An overview of edible foams in food and modern cuisine: Destabilization and stabilization mechanisms and applications

Foam, as a structured multi-scale colloidal system, is becoming increasingly popular in food because it gives a series of unique textures, structures, and appearances to foods while maintaining clean labels. Recently, developing green and healthy food-grade foaming agents, improving the stability of edible foams, and exploring the application of foam structures and new foaming agents have been the focus of foam systems. This review comprehensively introduces the destabilization mechanisms of foam and summarizes the main mechanisms controlling the foam stability and progress of different food-grade materials (small-molecular surfactants, biopolymers, and edible Pickering particles). Furthermore, the classic foam systems in food and modern cuisine, their applications, developments, and challenges are also underlined. Natural small-molecular surfactants, novel plant/microalgae proteins, and edible colloidal particles are the research hotspots of high-efficiency food-grade foam stabilizers. They have apparent differences in foam stability mechanisms, and each exerts its advantages. However, the development of foam stabilizers remains to be enriched compared with emulsions. Food foams are diverse and widely used, bringing unique enjoyment and benefit to consumers regarding sense, innovation, and health attributes. In addition to industrial inflatable foods, the foam foods in molecular gastronomy are also worthy of exploration. Moreover, edible foams may have greater potential in structured food design, 3D/4D printing, and controlled flavor release in the future. This review will provide a reference for the efficient development of functional inflatable foods and the advancement of foam technologies in modern cuisine.

Sugar Levels Determine Fermentation Dynamics during Yeast Pastry Making and Its Impact on Dough and Product Characteristics

Fermented pastry products are produced by fermenting and baking multi-layered dough. Increasing our knowledge of the impact of the fermentation process during pastry making could offer opportunities for improving the production process or end-product quality, whereas increasing our knowledge on the sugar release and consumption dynamics by yeast could help to design sugar reduction strategies. Therefore, this study investigates the impact of yeast fermentation and different sugar concentrations on pastry dough properties and product quality characteristics. First, yeasted pastry samples were made with 8% yeast and 14% sucrose on a wheat flour dry matter base and compared to non-yeasted samples. Analysis of saccharide concentrations revealed that sucrose was almost entirely degraded by invertase in yeasted samples after mixing. Fructans were also degraded extensively, but more slowly. At least 23.6 ± 2.6% of the released glucose was consumed during fermentation. CO₂ production during fermentation contributed more to product height development than water and ethanol evaporation during baking. Yeast metabolites weakened the gluten network, causing a reduction in dough strength and extensibility. However, fermentation time had a more significant impact on dough rheology parameters than the presence of yeast. In balance, yeast fermentation did not significantly affect the calculated sweetness factor of the pastry product with 14% added sucrose. Increasing the sugar content (21%) led to higher osmotic stress, resulting in reduced sugar consumption, reduced CO₂ and ethanol production and a lower product volume. A darker colour and a higher sweetness factor were obtained. Reducing the sugar content (7%) had the opposite effect. Eliminating sucrose from the recipe (0%) resulted in a shortened productive fermentation time due to sugar depletion. Dough rheology was affected to a limited extent by changes in sucrose addition, although no sucrose addition or a very high sucrose level (21%) reduced the maximum dough strength. Based on the insights obtained in this study, yeast-based strategies can be developed to improve the production and quality of fermented pastry.

Texture design of gluten-free bread by mixing under controlled headspace atmosphere

Gluten-free breads often show a reduced specific bread volume, in comparison to gluten-containing products, caused by non-adapted processing technologies of gluten-free dough. In this investigation, different mixing speeds and durations (600–3000 rpm for 3 min, 5 min or 8 min, respectively) as well as variations in the pressure (prel – 50 to prel + 130 kPa) in the headspace atmosphere during mixing (Stephan mixer) and pressure ratios of overpressure/negative pressure of 8 min mixing (20/80, 50/50, 80/20) were studied to determine their impact on the gas volume fraction of dough and specific volume of breads. A pressure rise of prel 50 kPa, prel 100 kPa or prel 130 kPa increased the gas volume fraction in dough of 60%, 100% or 120%, respectively, and led to a significant higher specific bread volume (7%) and the reduction of crumb hardness (35%) at prel 130 kPa. A linear correlation (R2 = 0.843) between the pressure and specific volume of breads was found. An extended first mixing phase at overpressure resulted in the formation of a very fine pore structure, whereby a short overpressure phase caused the formation of big pores. Thus, the control of the headspace atmosphere during mixing is a suitable parameter to adjust the density of dough and consequently, the pore size distribution for a specific texture design.

Effects of thermal properties and behavior of wheat starch and gluten on their interaction: A review

Starch and gluten, the most important macromolecules in wheat flour, vary in thermal properties. The thermal behavior of starch, gluten and their complexes during the manufacture and quality control of flour products need to be accurately understood. However, the high complexity of starch-gluten systems impedes the accurate description of their interactions. When heated within varying temperature ranges and when water molecules are involved, the behaviors of amylose and amylopectin change, and the properties of the starch are modified. Moreover, important indicators of starch granules such as gelatinization temperature, peak viscosity, and so on, which are encapsulated by the gluten matrix, are altered. Meanwhile, the high-temperature environment induces the opening of the intrachain disulfide bonds of gliadin, leading to an increase in the probability of interchain disulfide bond formation in the gluten network system. These behaviors are notable and may provide insights into this complex interaction. In this review, the relationship between the thermal behavior of wheat starch and gluten and the quality of flour products is analyzed. Several methods used to investigate the thermal characteristics of wheat and its flour products are summarized, and some thermal interaction models of starch and gluten are proposed.