Green and sustainable technologies for the decontamination of fungi and mycotoxins in rice: A review

Recent Advances in Non-Contact Food Decontamination Technologies for Removing Mycotoxins and Fungal Contaminants

Agricultural food commodities are highly susceptible to contamination by fungi and mycotoxins, which cause great economic losses and threaten public health. New technologies such as gamma ray irradiation, ultraviolet radiation, electron beam irradiation, microwave irradiation, pulsed light, pulsed electric fields, plasma, ozone, etc. can solve the problem of fungal and mycotoxin contamination which cannot be effectively solved by traditional food processing methods. This paper summarizes recent advancements in emerging food decontamination technologies used to control various fungi and their associated toxin contamination in food. It discusses the problems and challenges faced by the various methods currently used to control mycotoxins, looks forward to the new trends in the development of mycotoxin degradation methods in the future food industry, and proposes new research directions.

Encapsulation of Apium graveolens essential oil into chitosan nanobiopolymer for protection of stored rice against Fusarium verticillioides and fumonisins contamination

The present investigation entails the encapsulation of Apium graveolens essential oil into chitosan nanobiopolymer (AGEO-Ne) and assessment of its efficacy against Fusarium verticillioides contamination and fumonisins biosynthesis in stored rice (Oryza sativa L.) samples. The AGEO was encapsulated through ionic gelation process and characterized by scanning electron microscopy (SEM), Dynamic light scattering (DLS), X-ray diffractometry (XRD), and Fourier transform infrared spectroscopy (FTIR) analyses. The AGEO exhibited bi-phasic delivery pattern from chitosan matrix. The AGEO caused complete inhibition of F. verticillioides growth at 1.2 μL/mL, while fumonisin B1 (FB1) and B2 (FB2) biosynthesis at 1.2 and 1.0 μL/mL, respectively. On the other hand, nanoencapsulated AGEO (AGEO-Ne) exhibited improved efficacy, caused complete inhibition of fungal growth at 0.8 μL/mL, and FB1 and FB2 production at 0.8 and 0.6 μL/mL, respectively. AGEO-Ne caused 100 % inhibition of ergosterol synthesis at 0.8 μL/mL and exhibited greater efflux of Ca2+, Mg2+, K+ ions (18.99, 21.63, and 25.38 mg/L) as well as 260 and 280 nm absorbing materials from exposed fungal cells. The in silico interaction of granyl acetate and linalyl acetate with FUM 21 protein validated the molecular mechanism for inhibition of FB1 and FB2 biosynthesis. Further, improvement in antioxidant activity of AGEO-Ne was observed after encapsulation with IC50 values of 12.08 and 6.40 μL/mL against DPPH and ABTS radicals, respectively. During in situ investigation, AGEO caused 82.09 and 86.32 % protection of rice against F. verticillioides contamination in inoculated and uninoculated rice samples, respectively, while AGEO-Ne exhibited 100 % protection of fumigated rice samples against F. verticillioides proliferation as well as FB1 and FB2 contamination. The AGEO-Ne also caused better retardation of lipid peroxidation (41.35 and 37.52 μM/g FW malondialdehyde in inoculated and uninoculated treatment) and acceptable organoleptic properties in rice samples, which strengthen its application as plant based novel preservative in food and agricultural industries.

Determination of aflatoxins in rice from Penang, Malaysia by dispersive liquid-liquid micro-extraction and LC-MS/MS

Rice is one of the crops cultivated in Malaysia, and it is the main diet for most of the population. In this study, dispersive liquid-liquid micro-extraction (DLLME) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) were used to develop, optimise and validate a reliable, easy-to-use and quick approach to detect aflatoxin B1 (AFB1), aflatoxin B2 (AFB2), aflatoxin G1 (AFG1) and aflatoxin G2 (AFG2). The extraction recoveries in DLLME were enhanced by the addition of 5% salt, utilising chloroform as the extraction solvent and acetonitrile as the dispersive solvent. The DLLME parameters - the extraction solvent volume, salt concentration and dispersive solvent volume were optimised with Box-Behnken design (BBD) and response surface methodology (RSM). Under optimised experimental conditions, excellent linearity was obtained with a limit of detection (LOD) ranging from 0.125 to 0.25 ng g-1, a limit of quantitation (LOQ) ranging from 0.25 to 0.3 ng g-1 and a correlation value (R2) of 0.990. The matrix effects were between -11.1% and 19.9%, and recoveries ranged from 87.4% to 117.3%. The optimised and validated method was used effectively to assess aflatoxins contamination in 20 commercial rice samples collected from local supermarkets in Penang, Malaysia. AFB1 was detected at 0.41-0.43 ng g-1 in two rice samples, below the regulatory limit.

Mechanism of improving anaerobic fermentation performance of kitchen waste pretreated by ionizing irradiation-part 1: rice

Ionizing irradiation, as a new pretreatment method for the anaerobic fermentation of organic pollutants, is featured with fast reaction speed, good treatment effect, no need to add any chemical reagents, and no secondary pollution. This study explores the mechanism of improving anaerobic fermentation performance of rice samples pretreated by cobalt-60 gamma irradiation through the influence on fermentation substrate, acidogenic phase and methanogenic phase. The results reveal that the soluble chemical oxygen demand of the irradiated rice sample at an absorbed dose of 9.6 kGy increases by 12.4 times due to the dissolution of small molecules of fat-soluble organic matter. The yield of biogas in the acidogenic phase increases by 22.2% with a slight increase in hydrogen gas content. The yield of biogas and methane gas content in the methanogenic phase increases by 27.3% and 15%, respectively. Microbial genome analysis, performed with MiSeq high-throughput sequencing and metagenomic methods, suggests the microbial abundance and metabolic functions in the anaerobic fermentation process change significantly as a result of the pretreatment by gamma irradiation.

Aflatoxin detoxification by thermal cooking treatment and evaluation of in vitro bioaccessibility from white and brown rice

Aflatoxins pose a severe risk to the human health. In this study, the detoxifying capacity of a thermal cooking treatment applied to white and brown rice spiked with aflatoxins B1, B2, G1 and G2 as well as the aflatoxin bioaccessibility in cooked rice after applying an in vitro digestion model was evaluated. The cooking treatment (boiling with water at 100 °C for 12 min) evidenced an important extraction capacity of the boiling water over aflatoxins (25 %-56 %), that was higher for brown rice. Moreover, aflatoxins G1 and G2 were unstable with losses around 35 %. The highest bioaccessibility percentage was obtained for white rice (60 %-83 %) compared to brown rice (28 %-47 %), due to aflatoxin losses from brown rice after the gastric step. These results confirm the potential of this thermal cooking treatment to reduce aflatoxins in rice and suggest the influence of the nutritional composition of each rice on aflatoxin behaviour.

Recent developments in applications of physical fields for microbial decontamination and enhancing nutritional properties of germinated edible seeds and sprouts: a review

Germinated edible seeds and sprouts have attracted consumers because of their nutritional values and health benefits. To ensure the microbial safety of the seed and sprout, emerging processing methods involving physical fields (PFs), having the characteristics of high efficiency and environmental safety, are increasingly proposed as effective decontamination processing technologies. This review summarizes recent progress on the application of PFs to germinating edible seeds, including their impact on microbial decontamination and nutritional quality and the associated influencing mechanisms in germination. The effectiveness, application scope, and limitation of the various physical techniques, including ultrasound, microwave, radio frequency, infrared heating, irradiation, pulsed light, plasma, and high-pressure processing, are symmetrically reviewed. Good application potential for improving seed germination and sprout growth is also described for promoting the accumulation of bioactive compounds in sprouts, and subsequently enhancing the antioxidant capacity under favorable PFs processing conditions. Moreover, the challenges and future directions of PFs in the application to germinated edible seeds are finally proposed. This review also attempts to provide an in-depth understanding of the effects of PFs on microbial safety and changes in nutritional properties of germinating edible seeds and a theoretical reference for the future development of PFs in processing safe sprouted seeds.

Target-Induced AIE Effect Coupled with CRISPR/Cas12a System Dual-Signal Biosensing for the Ultrasensitive Detection of Gliotoxin

Here, a novel rapid and ultrasensitive aptamer biosensor was designed for target-induced activation of AIE effect and followed by the activation of Crispr Cas12a (LbCpf1)-mediated cleavage to achieve dual-signal detection. The prepared DNA building blocks contain the target aptamer, ssDNA-Fc, and Activator1. In this system, the activation mode was divided into two steps. First, when the target interacts with the aptamers, the DNA building blocks would be disintegrated rapidly, releasing a mass of Ac1, generating ETTC-dsDNA aggregated to produce a fluorescence signal by the AIE effect. Second, with the release of Ac2, LbCpf1-crRNA was activated, which greatly improves the ssDNA-Fc cleavage efficiency to render signal amplification and ultrasensitive detection of the target. Satisfactorily, using this approach to detect gliotoxin, optimal conditions for detection was achieved for reducing the detection time to 55 min, achieving a low detection limit of 2.4 fM and a satisfactory linear in the range of 50 fM to 1 nM, which addressed the shortcoming of a weak electrochemical signal in previous sensors. The water-insoluble AIE material was coupled with DNA to obtain water-soluble ETTC-dsDNA and successfully introduced into the sensor system, with a low detection limit of 5.6 fM. Subsequently, the biosensor combined with handheld electrochemical workstation was successfully applied in the detection of gliotoxin in five actual samples, with a detection range of 32.0 to 2.09 × 108 pM. This strategy not only provides a novel and effective detection platform for mycotoxins in complex food matrices but also opens a promising avenue for various molecules detection in imaging and disease diagnosis.

Review: Synthesis of metal organic framework-based composites for application as immunosensors in food safety

Ensuring food safety continues to be one of the major global challenges. For effective food safety monitoring, fast, sensitive, portable, and efficient food safety detection strategies must be devised. Metal organic frameworks (MOFs) are porous crystalline materials that have attracted attention for use in high-performance sensors for food safety detection owing to their advantages such as high porosity, large specific surface area, adjustable structure, and easy surface functional modification. Immunoassay strategies based on antigen-antibody specific binding are one of the important means for accurate and rapid detection of trace contaminants in food. Emerging MOFs and their composites with excellent properties are being synthesized, providing new ideas for immunoassays. This article summarizes the synthesis strategies of MOFs and MOF-based composites and their applications in the immunoassays of food contaminants. The challenges and prospects of the preparation and immunoassay applications of MOF-based composites are also presented. The findings of this study will contribute to the development and application of novel MOF-based composites with excellent properties and provide insights into advanced and efficient strategies for developing immunoassays.

Mycotoxins in Rice Correlate with Other Contaminants? A Pilot Study of the Portuguese Scenario and Human Risk Assessment

Rice is the second most important cereal crop and is vital for the diet of billions of people. However, its consumption can increase human exposure to chemical contaminants, namely mycotoxins and metalloids. Our goal was to evaluate the occurrence and human exposure of aflatoxin B1 (AFB1), ochratoxin A (OTA), zearalenone (ZEN), and inorganic arsenic (InAs) in 36 rice samples produced and commercialized in Portugal and evaluate their correlation. The analysis of mycotoxins involved ELISA, with limits of detection (LODs) of 0.8, 1 and 1.75 μg kg^-1 for OTA, AFB1, and ZEN, respectively. InAs analysis was carried out by inductively coupled plasma mass spectrometry (ICP-MS; LOD = 3.3 μg kg^-1). No sample showed contamination by OTA. AFB1 was present in 2 (4.8%) samples (1.96 and 2.20 μg kg^-1), doubling the European maximum permitted level (MPL). Concerning ZEN, 88.89% of the rice samples presented levels above the LOD up to 14.25 µg kg^-1 (average of 2.75 µg kg^-1). Regarding InAs, every sample presented concentration values above the LOD up to 100.0 µg kg^-1 (average of 35.3 µg kg^-1), although none surpassed the MPL (200 µg kg^-1). No correlation was observed between mycotoxins and InAs contamination. As for human exposure, only AFB1 surpassed the provisional maximum tolerable daily intake. Children were recognized as the most susceptible group.

Fe3O4/ZIFs-based magnetic solid-phase extraction for the effective extraction of two precursors with diverse structures in aflatoxin B1 biosynthetic pathway

The aflatoxin B₁ (AFB₁) early warning technique based on precursors is an effective strategy for the prevention of AFB₁ contamination risk. The determination of precursors is imperative to ensure the efficiency of the early warning technique. Herein, a controllable magnetic adsorbent Fe₃O₄/ZIFs was first introduced for the effective extraction and determination of averantin (AVN) and sterigmatocystin (ST) precursors in cereal by combining magnetic solid-phase extraction (MSPE) and high-performance liquid chromatography (HPLC). Benefiting from the abundant adsorption sites and multifunctional groups matching the analytes, Fe₃O₄/ZIFs effectively and simultaneously extracted AVN and ST with great differences in polarity and structure via multiple interactions. AVN was extracted by Fe₃O₄/ZIFs mainly through π-π and hydrophobic interactions, while ST was extracted predominantly by electrostatic interactions and surface complexation. The limits of detection were 0.08 μg kg^-1 (AVN) and 0.36 μg kg^-1 (ST). The developed method exhibited satisfactory spiked recoveries (79.1%-105.4%) in the determination of AVN and ST in rice. This work provides a novel analytical strategy for further studying AFB₁ early warning technique and the formation and transformation of aflatoxins.

MXene-based aptasensor for the detection of aflatoxin in food and agricultural products

The detection of toxins that contaminate food needs highly sensitive and selective techniques to prevent substantial monitory loss. In this regard, various nanostructured material-enabled biosensors, have recently been developed to improve the detection of food toxins among them aflatoxin is the prevalent one. The biosensor-based detection of aflatoxin is quick, cheaper, and needs less skilled personnel, therefore overcoming the shortcomings of conventional techniques such as LC/MS-MS, HPLC, and ELISA assays. 2D MXenes manifest as an efficient material for biosensing due to their desirable biocompatibility, magnificent mechanical strength, easiness of surface functionalization, and tuneable optical and electronic features. Contrary to this, aptamers as biorecognition elements (BREs) possess high selectivity, sensitivity, and ease of synthesis when compared to conventional BREs. In this review, we explored the most cutting-edge aptamer-based MXene-enabled biosensing technologies for the detection of the most poisonous mycotoxins (i.e., Aflatoxins) in food and environmental matrices. The discussion begins with the synthesis processes and surface functionalization/modification of MXenes. Computational approaches for designing aptasensors and advanced data analysis based on artificial intelligence and machine learning with special emphasis over Internet-of-Thing integrated biosensing devices has been presented. Besides, the advantages of aptasensors over conventional methods along with their limitations have been briefed. Their benefits, drawbacks, and future potential are discussed concerning their analytical performance, utility, and on-site adaptability. Additionally, next-generation MXene-enabled biosensing technologies that provide end users with simple handling and improved sensitivity and selectivity have been emphasized. Owing to massive applicability, economic/commercial potential of MXene in current and future perspective have been highlighted. Finally, the existing difficulties are scrutinized and a roadmap for developing sophisticated biosensing technologies to detect toxins in various samples in the future is projected.

Moisture-Dependent Physical-Mechanical Properties of Maize, Rice, and Soybeans as Related to Handling and Processing

Knowledge of physical and mechanical properties of cereal grains is important for designing handling and processing equipment. However, there is still a lack of knowledge on the influence of moisture content on the physical-mechanical properties as related to machine design. The aim of this study was to investigate and describe the changes in select physical-mechanical properties of maize, rice, and soybeans at various moisture content (10%, 14%, 18%, 22%, 26%; wet basis) and their compression behavior at two loading rates of 1.25 mm/min and 125 mm/min. The measured physical and mechanical properties include size, shape, and breakage force of single kernels. It was found that an increase in moisture content increased the kernel size, altered the kernel shape, and decreased the bulk density. The effects of moisture content and loading rate on breakage force, stress, and energy varied depending on the grain type. Our results indicated that an increase in moisture content changed the mechanical behavior of grain kernels from brittle to viscoelastic. To prevent kernel damage during processing and handling, the measured force and stress during compression can be used as the limit value for designing equipment.

Energy-Dependent Particle Size Distribution Models for Multi-Disc Mill

Comminution is important in the processing of biological materials, such as cereal grains, wood biomass, and food waste. The most popular biomaterial grinders are hammer and roller mills. However, the grinders with great potential in the processing of biomass are mills that use cutting, e.g., disc mills. When it comes to single-disc and multi-disc grinders, there are not many studies describing the relationships between energy, motion, material, and processing or describing the effect of grinding, meaning the size distribution of a product. The relationship between the energy and size reduction ratio of disc-type grinder designs has also not been sufficiently explored. The purpose of this paper was to develop models for the particle size distribution of the ground product in multi-disc mills depending on the variable process parameters, i.e., disc rotational velocity and, consequently, power consumption, and the relationship between the grinding energy and the shape of graining curves, which would help predict the product size reduction ratio for these machines. The experiment was performed using a five-disc mill, assuming the angular velocity of the grinder discs was variable. Power consumption, product particle size, and specific comminution energy were recorded during the tests. The Rosin-Rammler-Sperling-Bennet (RRSB) distribution curves were established for the ground samples, and the relationships between distribution coefficients and the average angular velocity of grinder discs, power consumption, and specific comminution energy were determined. The tests showed that the specific comminution energy increases as the size reduction ratio increases. It was also demonstrated that the RRSB distribution coefficients could be represented by the functions of angular velocities, power consumption, and specific comminution energy. The developed models will be a source of information for numerical modelling of comminution processes.

Comparison of the Effect of Plasma-Activated Water and Artificially Prepared Plasma-Activated Water on Wheat Grain Properties

Recently, much attention has been paid to the use of low-temperature plasmas and plasma-activated water (PAW) in various areas of biological research. In addition to its use in medicine, especially for low-temperature disinfection and sterilization, a number of works using plasma in various fields of agriculture have already appeared. While direct plasma action involves the effects of many highly reactive species with short lifetimes, the use of PAW involves the action of only long-lived particles. A number of articles have shown that the main stable components of PAW are H2O2, O3, HNO2, and HNO3. If so, then it would be faster and much more practical to artificially prepare PAW by directly mixing these chemicals in a given ratio. In this article, we review the literature describing the composition and properties of PAW prepared by various methods. We also draw attention to an otherwise rather neglected fact, that there are no significant differences between the action of PAW and artificially prepared PAW. The effect of PAW on the properties of wheat grains (Triticum aestivum L.) was determined. PAW exposure increased germination, shoot length, and fresh and dry shoot weight. The root length and R/S length, i.e., the ratio between the underground (R) and aboveground (S) length of the wheat seedlings, slightly decreased, while the other parameters changed only irregularly or not at all. Grains artificially inoculated with Escherichia coli were significantly decontaminated after only one hour of exposure to PAW, while Saccharomyces cerevisiae decontamination required soaking for 24 h. The differences between the PAW prepared by plasma treatment and the PAW prepared by artificially mixing the active ingredients, i.e., nitric acid and hydrogen peroxide, proved to be inconsistent and statistically insignificant. Therefore, it may be sufficient for further research to focus only on the effects of artificial PAW.