Environmental and occupational exposure to resorcinol in Finland

Resorcinol as "endocrine disrupting chemical": Are thyroid-related adverse effects adequately documented in reptiles? In vivo experimentation in lizard Podarcis siculus

The endocrine system and particularly thyroid hormones regulate almost all physiological processes in a timely manner in all vertebrates, from fish to reptiles to mammals, so risk assessment of endocrine disrupting chemicals (EDCs) is extremely important given their persistent presence in all environmental matrices. Resorcinol, as well as nonylphenol, octylphenol, and bisphenol A, F, S, are non-Halogenated Phenolic (non-HPCs) Chemicals known as EDCs. Resorcinol is a particular example in that most studies are based exclusively on humans while animal studies are few and often inadequate. The aim of this study was to assess the effects of exposure to different doses of resorcinol on the thyroid gland of the lizard Podarcis siculus during different periods of the thyroid gland activity cycle. Our results showed histopathologic changes in thyroid (follicular cell height increase and colloid area decrease), a thyroid weight increase in combination with serum T4 and T3 decrease, serum TSH, TRH increase in male lizards treated with 0.8,3.9,13.1, and 36.9 mg/kg/d of resorcinol. Besides, we also investigated the impacts of resorcinol treatments on hepatic 5'ORD (type II) deiodinase and hepatic content of T3 and T4. Our findings showed that they are in agreement with in vivo in humans and in rodents data and therefore, resorcinol in reptiles may meet the WHO definition of ECDs.

Facile design of FeCu metal-organic frameworks anchored on layer Ti3C2Tx MXene for high-performance electrochemical sensing of resorcinol

This work reports the rational design of a composite material by growing FeCu-MOF-919 on the surface of layered Ti3C2Tx MXene. The introduction of Ti3C2Tx MXene simultaneously weakens the aggregation of FeCu-MOF-919 and Ti3C2Tx MXene, which increases the electrochemical reaction active site of the composite material and improves the electrochemical activity. Interestingly, the FeCu-MOF-919/Ti3C2Tx based sensors were used to detect resorcinol (RS) with a wide linear range (0.5-152.5 μM), excellent sensitivity (0.23 μA μM-1 cm-2), low limit of detection (LOD = 0.08 μM) and outstanding stability. Meanwhile, the sensor shows high repeatability of 1.07 % RSD, reproducibility of 1.47 % RSD and anti-interference performance. What's more, the sensor can be successfully used to detect RS in tap water with good recoveries (96.25-103.37 %, RSD ≤2.18 %), demonstrating that the FeCu-MOF-919/Ti3C2Tx exhibits significant potential as an advanced sensing apparatus for the surveillance of RS in the natural environment.

Eliminating xenobiotics organic compounds from greywater through green synthetic nanoparticles

Xenobiotic Organic Compounds (XOCs) have been widely considered to be pollutant compounds due to their harmful impacts on aquatic life. However, there have been few rigorous studies of cutting-edge technology used to eradicate XOCs and their presence in bathroom greywater. The present review provides a comprehensive examination of current methodologies used for removing XOCs by photocatalysis of green nanoparticles. It was appeared that zinc oxide nanoparticles (ZnO NPs) have high efficiency (99%) in photocatalysis process. Green synthesis provides proven processes that do not require dangerous chemicals or expensive equipment, making photocatalysis a potential solution for the status quo. XOCs residue was decomposed, and pollutants were eliminated with varied degrees of efficiency using green synthesis ZnO nanoparticles. It is hypothesized that the utilization of photocatalysis can create a greywater treatment system capable of degrading the toxic XOCs in greywater while increasing the pace of production. Hence, this review will be beneficial in improving greywater quality and photocatalysis using green nanoparticles can be an immediate platform in solving the issue regarding the existence of XOCs in greywater in Malaysia. Researchers in the future may benefit from focusing on optimizing photocatalytic degradation using green-synthesis ZnO. It might also help with the creativity and productivity of the next generation of authoritative concerns, notably water conservation.

The Effect of Resorcinol on the Kinetics of Underpotentially Deposited Hydrogen and the Oxygen Evolution Reaction, Studied on Polycrystalline Pt in a 0.5 M H2SO4 Solution

This article reports on the influence of resorcinol (RC) on the kinetics of underpotential deposition of hydrogen (UPD of H) and the oxygen evolution reaction (OER), studied on a polycrystalline Pt electrode in a 0.5 M sulphuric acid supporting solution. It is well known that both PEM fuel cells and water electrolysers’ electrodes often contain significant amounts of nanostructured Pt or other types of noble metal particles. These materials provide the superior catalytic activity of electrochemical reactions such as OER (oxygen evolution reaction), HER (hydrogen evolution reaction) and ORR (oxygen reduction reaction). The trace amounts of phenolic substances contained in air or water could be harmful (when in contact with a fuel cell/water electrolyser’s working environment) to the abovementioned catalytic surfaces. Hence, they could potentially have severe detrimental effects on the kinetics of these processes. The results obtained in this work provided evidence for the detrimental role of Pt surface-adsorbed resorcinol molecules (or their electrodegradation products) on the kinetics of UPD of H and the oxygen evolution reaction. The above was revealed through evaluation of the associated charge-transfer resistance and capacitance parameters, comparatively derived on a platinum electrode, for the initial and the resorcinol-modified H2SO4 electrolyte.

Simultaneous determination of dihydroxybenzene isomers in cosmetics by synthesis of nitrogen-doped nickel carbide spheres and construction of ultrasensitive electrochemical sensor

N-doped nickel carbide spheres (N-NiCSs) were synthesised for the first time by controlling the type of surfactant, surfactant-to-Ni molar ratio, reaction temperature, and reaction time. The morphology, composition, and electrochemical behaviour of the synthesised spheres revealed that the spheres presented a large specific surface area, abundant pores, and good conductivity, with excellent electrocatalytic performance. A glassy carbon electrode-modified with N-NiCSs was used for the simultaneous identification of hydroquinone (HQ), catechol (CC), and resorcinol (RS) utilising differential pulse voltammetry. The oxidation peaks of HQ, CC, and RS were observed at 9.8, 119, and 470 mV, respectively (vs. SCE). Under optimal conditions, the oxidation peak currents of HQ, CC, and RS were linear in the concentration ranges of 0.005-100 μM, 0.05-200 μM, and 5-500 μM, respectively. The detection limits of HQ, CC, and RS were 0.00152 μM, 0.015 μM, and 0.24 μM (S/N = 3), respectively. The sensitivities of HQ, CC, and RS were 4.635, 2.069, and 0.985 μA μM^-1 cm^-2 (S/N = 3), respectively. The fabricated sensor was successfully used to detect HQ, CC, and RS in hair dye, whitening cream, and local tap water samples. Moreover, the sensor presented a good repeatability, reproducibility, and stability during cosmetic testing and a relatively wide linear range, an ultralow detection limit, and an ultrahigh sensitivity.

Freezing Weakens the Barrier Function of Reconstructed Human Epidermis as Evidenced by Raman Spectroscopy and Percutaneous Permeation

The development and characterization of reconstructed human epidermis (RHE) is an active area of R&D. RHE can replace animal tissues in pharmaceutical, toxicological and cosmetic sciences, yielding scientific and ethical advantages. RHEs remain costly, however, due to consumables and time required for their culture and a short shelf-life. Storing, i.e., freezing RHE could help reduce costs but to date, little is known on the effects of freezing on the barrier function of RHE. We studied such effects using commercial EpiSkin™ RHE stored at -20, -80 and -150 °C for 1 and 10 weeks. We acquired intrinsic Raman spectra in the stratum corneum (SC) of the RHEs as well as spectra obtained following topical application of resorcinol in an aqueous solution. In parallel, we quantified the effects of freezing on the permeation kinetics of resorcinol from time-dependent permeation experiments. Principal component analyses discriminated the intrinsic SC spectra and the spectra of resorcinol-containing RHEs, in each case on the basis of the freezing conditions. Permeation of resorcinol through the frozen RHE increased 3- to 6-fold compared to fresh RHE, with the strongest effect obtained from freezing at -20 °C for 10 weeks. Due to the extensive optimization and standardization of EpiSkin™ RHE, the effects observed in our work may be expected to be more pronounced with other RHEs.

Electrodegradation of Resorcinol on Pure and Catalyst-Modified Ni Foam Anodes, Studied under Alkaline and Neutral pH Conditions

This work reports on the kinetics of electrochemical degradation of the resorcinol molecule, examined on nickel foam-based electrodes in contact with 0.1 M NaOH and 0.5 M Na₂SO₄ supporting electrolytes. The electrooxidation of resorcinol was examined on as-received, as well as on Pd-modified, nickel foam catalyst materials, produced via spontaneous deposition of trace amounts of palladium element. Electrochemical (cyclic voltammetry and a.c. impedance) experiments were carried out by means of a three-compartment, pyrex glass electrochemical cell, whereas continuous resorcinol electrooxidation tests were conducted galvanostatically (or potentistatically) with a laboratory-size, single-cell electrolyzer unit. In addition, quantitative determination of resorcinol and its possible electrodegradation products was performed by means of instrumental HPLC: High-Performance Liquid Chromatography/MS: Mass Spectrometry methodology. Also, SEM (Scanning Electron Microscopy) and EDX (Energy Dispersive X-ray spectroscopy) techniques were employed for Ni foam (Pd-modified Ni foam) surface characterizations.