Capillary electrophoresis coupled to mass spectrometry for biospeciation analysis: critical evaluation

Review: Advances in the Accuracy and Traceability of Metalloprotein Measurements Using Isotope Dilution Inductively Coupled Plasma Mass Spectrometry

Advances in inductively coupled plasma mass spectrometry and the methods used to prepare isotopically enriched standards, allow for the high accuracy measurement of metalloproteins by isotope dilution mass spectrometry. This technique has now reached a level of maturity whereby a step change in the accuracy, precision, and traceability of, in particular, clinical, and biomedical measurements is achievable. Current clinical measurements, which require low limits of detection in the presence of complex sample matrices, use indirect methods based on immunochemistry for the study of human disease. However, this approach suffers from poor traceability, requiring comparisons based on provision of matrix-based reference materials, used as analytical standards. This leads to difficulty when changes in the reference material are required, often resulting in a lack of interlaboratory and temporal comparability in clinical results and reference ranges. In this review, we focus on the most important metalloproteins for clinical studies, to illustrate how the attributes of chromatography coupled to inorganic mass spectrometry can be used for the direct measurement of metalloproteins such as hemoglobin, transferrin, and ceruloplasmin. By using this approach, we hope to demonstrate how isotope dilution analysis can be used as a reference method to improve traceability and underpin clinical, biomedical, and other biological measurements.

CE-XRF-initial steps toward a non-invasive elemental sensitive detector for liquid separations

The toxicity, bioavailability, and mobilization of elements within the biosphere is dependent on its species. CE has emerged as a strong separation technique for elemental speciation. Conventionally, CE has been coupled with UV-vis, C⁴ D, PIXE (proton-induced X-ray emission), and ICP-MS. UV-vis and C⁴ D are not elemental sensitive detection methods, PIXE requires the etching of the detection window resulting in a very brittle capillary, and ICP-MS is an expensive large footprint instrument. Here, we aim to develop an elemental specific detector, XRF (X-ray fluorescence spectrometry), for use with CE. A custom-built micro-XRF was tested and static LODs were determined for 19 elements (Ca-U) with both unmodified (20-926 ppm) and modified capillaries (20-291 ppm). A custom-built CE was combined with the micro-XRF and separation of Ca²⁺ and Co²⁺ was obtained. Sr²⁺ coeluted with Ca²⁺ in the mixture, but because of the elemental sensitivity of XRF, the Sr and Ca signals could be separated. After successful testing of the micro-XRF, the feasibility of using a low-cost X-ray source and detector was tested. Even lower LODs were obtained for Ga and Rb, showing the feasibility of a smaller, low-cost XRF unit as an elemental specific detector. However, the buffer selection that can be conveniently used with XRF is currently limited due to capillary corrosion, likely correlated to radiolysis.

Combination of ICP-MS, capillary electrophoresis, and their hyphenation for probing Ru(III) metallodrug-DNA interactions

Determination of the DNA-binding reactivity and affinity is an important part of a successful program for the selection of metallodrug candidates. For such assaying, a range of complementary analytical techniques was proposed and tested here using one of few anticancer metal-based drugs that are currently in clinical trials, indazolium trans-[tetrachloridobis(1H-indazole)ruthenate(III), and a DNA oligonucleotide. A high reactivity of the Ru drug was confirmed in affinity capillary electrophoresis (CE) mode, where adduct formation takes place in situ (i.e., in the capillary filled with an oligonucleotide-containing electrolyte). To further characterize the binding kinetics, a drug–oligonucleotide mixture was incubated for a different period of time, followed by ultrafiltration separation into two different in molecular weight fractions (>3 and <3 kDa). The time-dependent distribution profiles of the Ru drug were then assessed by CE-inductively coupled plasma mass spectrometry (ICP-MS), revealing that at least two DNA adducts exist at equilibrium conditions. Using standalone ICP-MS, dominant equilibrium amount of the bound ruthenium was found to occur in a fraction of 5–10 kDa, which includes the oligonucleotide (ca. 6 kDa). Importantly, in all three assays, the drug was used for the first time in in-vitro studies, not in the intact form but as its active species released from the transferrin adduct at simulated cancer cytosolic conditions. This circumstance makes the established analytical platform promising to provide a detailed view on metallodrug targeting, including other possible biomolecules and ex vivo samples.

Cell-patterned glass spray for direct drug assay using mass spectrometry

In this work, the establishment of a glass spray mass spectrometry (GS-MS) platform for direct cell-based drug assay was described. Cell co-culture, drug-induced cell apoptosis, proliferation analysis and intracellular drug absorption measurement were performed simultaneously on this specifically designed platform. Two groups of co-cultured cells (NIH-3T3/HepG2 and HepG2/MCF-7) were cultivated and they showed high viability within 3 days. The biocompatibility of the platform facilitated the subsequent bioassays, in which, cyclophosphamide (CPA) and genistein were used as the model drugs. The distinctions of cell apoptosis and proliferation between the mono-cultured and co-cultured cells were clearly observed and well explained by in situ GS-MS measurements. A satisfactory linearity of the calibration curve between the relative MS intensity and CPA concentrations was obtained using stable isotope labeling method (y = 0.16545 + 0.0985x, R(2) = 0.9937). The variations in the quantity of absorbed drug were detected and the results were consistent with the concentration-dependence of cell apoptosis. All the results demonstrated that direct cell-based drug assay could be performed on the stable isotope labeling assisted GS-MS platform in a facile and quantitative manner.

Comparison of detection techniques for capillary electrophoresis analysis of gold nanoparticles

As metallic nanoparticles are growing in importance as analytes in CE, increases an interest in appropriate detection methods for their quantification in various samples. For gold nanoparticles (AuNPs), the most common UV detection poses intricacy of inadequate sensitivity that hinders the applicability of CE. With the objective of resolving this challenge, UV detection was compared with C(4) D and ICP-MS as alternative modes of detection for AuNPs. A C(4) D detector, applied under pressure-driven conditions, exhibited better sensitivity than a UV detector. However, C(4) D turned to be unsatisfactory to differentiate the signal of AuNPs at common CE conditions despite varying the nature of BGE and detection conditions. Due to intrinsic sensitivity and low background levels typical to Au, ICP-MS greatly surpasses UV detection. After optimization trials, CE-ICP-MS gained the LOD of AuNPs as low as 2 × 10(-15) M, as well as an excellent performance in terms of signal stability and linearity. Also importantly, the optimized BGE appears to be well matched to explore the behavior of AuNPs in biologically relevant systems. This was demonstrated by probing the interaction between AuNPs and the main blood-transporting protein, HSA.

Analytical methods for the determination of halogens in bioanalytical sciences: a review

Fluorine, chlorine, bromine, and iodine have been studied in biological samples and other related matrices owing to the need to understand the biochemical effects in living organisms. In this review, the works published in last 20 years are covered, and the main topics related to sample preparation methods and analytical techniques commonly used for fluorine, chlorine, bromine, and iodine determination in biological samples, food, drugs, and plants used as food or with medical applications are discussed. The commonest sample preparation methods, as extraction and decomposition using combustion and pyrohydrolysis, are reviewed, as well as spectrometric and electroanalytical techniques, spectrophotometry, total reflection X-ray fluorescence, neutron activation analysis, and separation systems using chromatography and electrophoresis. On this aspect, the main analytical challenges and drawbacks are highlighted. A discussion related to the availability of certified reference materials for evaluation of accuracy is also included, as well as a discussion of the official methods used as references for the determination of halogens in the samples covered in this review.

An online ionic liquid-based microextraction system coupled to electrothermal atomic absorption spectrometry for determination in environmental samples and pharmaceutical formulations

In the present work, an ionic liquid (IL) lighter than water was employed as extraction solvent in a dispersive liquid-liquid microextraction (DLLME) methodology. An original flow injection system for online microextraction and preconcentration of cobalt (Co) based on the use of tetradecyl(trihexyl)phosphonium chloride (CYPHOS® IL 101) was designed. Cobalt was complexed with 4-(2-pyridylazo)-resorcinol (PAR) reagent at pH 4.8 and then, the IL-DLLME procedure was developed by dispersing CYPHOS® IL 101 with acetone in an aqueous solution containing Co-PAR complex. Different pyridylazo dyes were evaluated for Co preconcentration in terms of their molecular structure, stability and acid-base equilibrium. Online extraction of Co-PAR into the IL and separation of the dispersed IL enriched phase were accomplished with a microcolumn containing Florisil material. Cobalt was removed from the microcolumn with a 10% (v/v) HNO3 acidified-acetone solution and finally measured by electrothermal atomic absorption spectrometry (ETAAS). The detection limit achieved after preconcentration of 2 mL of sample solution was 8 ng L-1. The precision for 10 replicate determinations at the 1 µg L-1 Co level was 5.1% relative standard deviation (RSD), calculated from the peak heights obtained. The method was successfully applied to Co determination in water samples as well as ophthalmic and parenteral solutions. For the first time, an IL-based microextraction technique was applied for metal determination in these complex samples, where Co recovery varied between 97.9 and 103%.

Determination of stimulants and narcotics as well as their in vitro metabolites by online CE-ESI-MS

A simple, rapid and sensitive CE-ESI-MS method for the simultaneous analysis of seven stimulants and narcotics (amphetamine, ephedrine, methadone, pethidine, tetracaine, codeine and heroin) was developed. The CE-ESI-MS experimental conditions were optimized as follows: 20 mmol/L ammonium acetate with pH 9.0 as running buffer, the separation voltage of 22 kV and the sheath liquid of isopropanol/water (1:1 v/v) containing 7.5 mmol/L acetic acid with 3.0 μL/min flow rate. Under the optimized conditions, the stimulants and narcotics were well separated within 4.6 min using a 70-cm length fused-silica capillary (50 μm id). The detection limits (S/N=3) of the CE-ESI-MS analysis were in the range of 0.40-1.0 ng/mL. Method repeatability of intra-day and inter-day was satisfactory. The recoveries obtained from the analysis of spiked urine samples were between 84.1 and 108%. The developed method was successfully applied for the simultaneous analysis of methadone, pethidine and codeine and their in vitro metabolites.

Recent advances in CE-MS: Synergy of wet chemistry and instrumentation innovations

CE with MS detection is a hyphenated technique which greatly improves the ability of CE to deal with real samples, especially with those coming from biology and medicine, where the target analytes are present as trace amounts in very complex matrices. CE-MS is now almost a routine technique performed on commercially available instruments. It faces currently a tremendous development of the technique itself as well as of its wide application area. Great interest in CE-MS is reflected in the scientific literature by many original research articles and also by numerous reviews. The review presented here has a general scope and belongs to a series of regularly published reviews on the topic. It covers the literature from the last 2 years, since January 2008 till June 2010. It brings a critical selection of related literature sorted into groups reflecting the main topics of actual scientific interest: (i) innovations in CE-ESI-MS, (ii) use of alternative interfaces, and (iii) ways to enhance sensitivity. Special attention is paid to novel electrolyte systems amenable to CE-MS including nonvolatile BGEs, to advanced CE separation principles such as MEKC, MEEKC, chiral CE, and to the use of preconcentration techniques.

Recent developments in instrumentation for capillary electrophoresis and microchip-capillary electrophoresis

Over the last years, there has been an explosion in the number of developments and applications of CE and microchip-CE. In part, this growth has been the direct consequence of recent developments in instrumentation associated with CE. This review, which is focused on the contributions published in the last 5 years, is intended to complement the articles presented in this special issue dedicated to instrumentation and to provide an overview of the general trends and some of the most remarkable developments published in the areas of high-voltage power supplies, detectors, auxiliary components, and compact systems. It also includes a few examples of alternative uses of and modifications to traditional CE instruments.

Insight in the transport behavior of copper glycinate complexes through the porcine gastrointestinal membrane using an Ussing chamber assisted by mass spectrometry analysis

An Ussing chamber study was conducted in order to investigate the transport behavior of copper glycinate complexes through a porcine gastrointestinal membrane. Organic copper complexes such as copper tri- and tetraglycinates (GGG-Cu(II) and GGGG-Cu(II)) were used as model system. In a novel analytical approach the Ussing chamber was combined with mass spectrometry. Therefore, relevant analytical methods based on MALDI-MS and a coupling of capillary electrophoresis to ICP-MS and ESI-MS were developed for the determination of copper complexes in the mucosal and serosal half-chambers. It was found that 86.1+/-8.5% of copper triglycinate but only 20.8+/-9.9% of copper tetraglycinate penetrated the digestive membrane without modification. Furthermore, inorganic copper species were not detected but a new copper complex (m/z 442) was found to be formed in both compartments of the Ussing chamber.