Understanding the interaction of multi-walled carbon nanotubes with mutagenic organic pollutants using computational modeling and biological experiments

Pyrene-polyethylene glycol-modified multi-walled carbon nanotubes: Genotoxicity in V79-4 fibroblast cells

The genotoxicity of pyrene-polyethylene glycol-modified multi-walled carbon nanotubes (MWCNT-PyPEG), engineered as a nanoplatform for bioapplication, was evaluated. Toxicity was assessed in hamster lung fibroblast cells (V79-4). MTT and Cell Titer Blue methods were used to evaluate cell viability. Genotoxicity was measured by the comet assay and the cytokinesis-block micronucleus cytome (CBMN-Cyt) assay, and fluorescence in situ hybridization (FISH) was used to test induction of structural chromosome aberrations (clastogenic activity) and/or numerical chromosome changes (aneuploidogenic activity). Exogenous metabolic activation enzymes were used in the CBMN-Cyt and FISH tests. Only with metabolic activation, the hybrids caused chromosomal damage, by both clastogenic and aneugenic processes.

Functionalized Multi Walled Carbon Nanotubes-Reinforced Hollow Fiber Solid/Liquid Phase Microextraction and HPLC-DAD for Determination of Phenazopyridine in Urine

Introduction:

A sensitive analytical method based on functionalized multi walled carbon nanotubes reinforced hollow fiber solid/liquid phase microextraction (F-MWCNTs-HF-SLPME) forwarded with HPLC-DAD for analyzing phenazopyridine from urine is presented.

Materials and Methods:

The extraction of phenazopyridine is performed using specially designed FMWCNTs- HF-SLPME device constructed as follows: the functionalized multi walled carbon nanotubes (F-MWCNTs) were immobilized into the pores of 2.5 cm hollow fiber micro-tube using capillary forces and ultrasonication, then, the lumen of the micro-tube was filled with 1-octanol with two ends sealed. Subsequently, the device was placed into 10-mL of urine sample containing the analyte with agitation. After ending extraction, the device was removed, rinsed, sonicated in 250 µL of organic solvent and analyzed directly by the separation system.

Results and Conclusion:

Different parameters affecting the performance of the developed method were optimized. The method showed good linearity with (R2) 0.999 and good repeatability with (RSDs) from 3.7 to 0.9% at analyte concentration ranged from 0.01 to 10 µg L-1 of spiked urine samples. The limit of detection/ quantitation, LODs/LOQs was 0.02/0.09 µg L-1. In comparison with reference methods, the developed method is considered as a promising microextraction technique for determination of trace phenazopyridine in human urine using a common HPLC without further cleanup procedures.

Simultaneous removal of heavy metals and cyanate in a wastewater sample using immobilized cyanate hydratase on magnetic-multiwall carbon nanotubes

Global environmental problems allied with waste management require novel approaches for the simultaneous removal of heavy metals and other associated compounds including cyanate. In this study, iron-oxide filled multi-walled carbon nanotubes (m-MWCNTs) were successfully synthesized and characterized by field emission gun scanning electron microscopy (FEGSEM), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The m-MWCNTs were amino-functionalized for the covalent immobilization of a recombinant cyanate hydratase (rTl-Cyn), and were characterized by fourier transform infrared (FTIR) spectroscopy. The immobilized rTl-Cyn on the m-MWCNTs (m-MWCNT-rTl-Cyn) had long term storage stability and showed great potential towards cyanate biodegradability. We found that m-MWCNT-rTl-Cyn retained >94% of the initial activity even after 10 repeated cycles of bio-catalysis. Strikingly, the m-MWCNT-rTl-Cyn simultaneously reduced the concentration of chromium (Cr), iron (Fe), lead (Pb) and copper (Cu) by 39.31, 35.53, 34.48 and 29.63%, respectively as well as the concentration of cyanate by ≥84%, in a synthetic wastewater sample.

A carefully designed nanoplatform based on multi walled carbon nanotube wrapped with aptamers

The interaction between carbon nanotubes (CNTs) and biological molecules of diagnostic and therapeutic interest, as well as the internalization of the CNTs-biomolecules complexes in different types of cell, has been extensively studied due to the potential use of these nanocomplexes as multifunctional nanoplatforms in a great variety of biomedical applications. The effective use of these nanobiotechnologies requires broad multidisciplinary studies of biocompatibility, regarding, for example, the in vitro and in vivo nanotoxicological assays, the capacity to target specific cells and the evaluation of their biomedical potential. However, the first step to be reached is the careful obtainment of the nanoplatform and the understanding of the actual surface composition and structural integrity of the complex system. In this work, we show the detailed construction of a nanoplatform created by the noncovalent interaction between oxidized multi walled carbon nanotubes (MWCNTs) and a DNA aptamer targeting tumor cells. The excess free aptamer was removed by successive washes, revealing the actual surface of the nanocomplex. The MWCNT-aptamer interaction by π-stacking was evidenced and shown to contribute in obtaining a stable nanocomplex compatible with aqueous media having good cell viability. The nucleotide sequence of the aptamer remained intact after the functionalization, allowing its use in further studies of specificity and binding affinity and for the construction of functional nanoplatforms.

Interactions of oxidized multiwalled carbon nanotube with cadmium on zebrafish cell line: The influence of two co-exposure protocols on in vitro toxicity tests

The widespread production and application of carbon nanotubes (CNT) have raising concerns about their release into the environment and, the joint toxicity of CNT with pre-existing contaminants needs to be assessed. This is the first study that investigated the co-exposure of oxidized multiwalled carbon nanotubes (ox-MWCNT) and cadmium (Cd) using a zebrafish liver cell line (ZFL). Two in vitro co-exposure protocols differing by the order of ox-MWCNT interaction with Cd and fetal bovine serum (FBS) proteins were evaluated. Ox-MWCNT was physical and chemical characterized and its adsorption capacity and colloidal stability in cell culture medium was determined in both protocols. Cytotoxicity was investigated by MTT, neutral red, trypan blue, lactate dehydrogenase assays and the necrosis and apoptosis events were determined using flow cytometer. The Cd presence in medium did not interfere in the protein corona composition of MWCNT but the order of interaction of FBS and Cd interfered in its colloidal stability and metal adsorption rate. The ox-MWCNT increased Cd toxicity at low concentration probably by a "Trojan horse" and/or synergistic effect, and induced apoptosis and necrosis in ZFL cells. Although it was not observed differences of toxicity between protocols, the interaction of ox-MWCNT first with Cd led to its precipitation in cell culture medium and, as a consequence, to a possible false viability result by neutral red assay. Taken together, it was evident that the order of compounds interactions disturbs the colloidal stability and affects the in vitro toxicological assays. Considering that Protocol A showed more ox-MWCNT stability after interaction with Cd, this protocol is recommended to be adopted in future studies.

Carcinogenicity of multi-walled carbon nanotubes: challenging issue on hazard assessment

OBJECTIVES

This report reviews the carcinogenicity of multi-walled carbon nanotubes (MWCNTs) in experimental animals, concentrating on MWNT-7, a straight fibrous MWCNT.

METHODS

MWCNTs were administered to mice and rats by intraperitoneal injection, intrascrotal injection, subcutaneous injection, intratracheal instillation and inhalation.

RESULTS

Intraperitoneal injection of MWNT-7 induced peritoneal mesothelioma in mice and rats. Intrascrotal injection induced peritoneal mesothelioma in rats. Intratracheal instillation of MWCNT-N (another straight fibrous MWCNT) induced both lung carcinoma and pleural mesothelioma in rats. In the whole body inhalation studies, in mice MWNT-7 promoted methylcholanthrene-initiated lung carcinogenesis. In rats, inhalation of MWNT-7 induced lung carcinoma and lung burdens of MWNT-7 increased with increasing concentration of airborne MWNT-7 and increasing duration of exposure.

CONCLUSIONS

Straight, fibrous MWCNTs exerted carcinogenicity in experimental animals. Phagocytosis of MWCNT fibers by macrophages was very likely to be a principle factor in MWCNT lung carcinogenesis. Using no-observed-adverse-effect level-based approach, we calculated that the occupational exposure limit (OEL) of MWNT-7 for cancer protection is 0.15 μg/m3 for a human worker. Further studies on the effects of the shape and size of MWCNT fibers and mode of action on the carcinogenicity are required.

Bioaccumulation of Multiwall Carbon Nanotubes in Tetrahymena thermophila by Direct Feeding or Trophic Transfer

Consumer goods contain multiwall carbon nanotubes (MWCNTs) that could be released during product life cycles into the environment, where their effects are uncertain. Here, we assessed MWCNT bioaccumulation in the protozoan Tetrahymena thermophila via trophic transfer from bacterial prey (Pseudomonas aeruginosa) versus direct uptake from growth media. The experiments were conducted using (14)C-labeled MWCNT ((14)C-MWCNT) doses at or below 1 mg/L, which proved subtoxic since there were no adverse effects on the growth of the test organisms. A novel contribution of this study was the demonstration of the ability to quantify MWCNT bioaccumulation at low (sub μg/kg) concentrations accomplished by employing accelerator mass spectrometry (AMS). After the treatments with MWCNTs at nominal concentrations of 0.01 mg/L and 1 mg/L, P. aeruginosa adsorbed considerable amounts of MWCNTs: (0.18 ± 0.04) μg/mg and (21.9 ± 4.2) μg/mg bacterial dry mass, respectively. At the administered MWCNT dose of 0.3 mg/L, T. thermophila accumulated up to (0.86 ± 0.3) μg/mg and (3.4 ± 1.1) μg/mg dry mass by trophic transfer and direct uptake, respectively. Although MWCNTs did not biomagnify in the microbial food chain, MWCNTs bioaccumulated in the protozoan populations regardless of the feeding regime, which could make MWCNTs bioavailable for organisms at higher trophic levels.

Interaction of engineered nanomaterials with hydrophobic organic pollutants

As nanomaterials become an increasing part of everyday consumer products, it is imperative to monitor their potential release during production, use and disposal, and to assess their impact on the health of humans and the ecosystem. This necessitates research to better understand how the properties of engineered nanomaterials (ENMs) lead to their accumulation and redistribution in the environment, and to assess whether they could become novel pollutants or if they can affect the mobility and bioavailability of other toxins. This study focuses on understanding the influence of nanostructured-TiO2 and the interaction of multi-walled carbon nanotubes with organic pollutants in water. We studied the adsorption and water phase dispersion of model pollutants with relatively small water solubility (i.e., two- and three-ring polyaromatic hydrocarbons and insecticides) with respect to ENMs. The sorption of pollutants was measured based on water phase analysis, and by separating suspended particles from the water phase and analyzing dried samples using integrated thermal-chromatographic-mass spectroscopic (TGA/GC/MS) techniques. Solid phase analysis using a combination of TGA/GC/MS is a novel technique that can provide real-time quantitative analysis and which helps to understand the interaction of hydrophobic organic pollutants and ENMs. The adsorption of these contaminants to nanomaterials increased the concentration of the contaminants in the aqueous phase as compared to the 'real' partitioning due to the octanol-water partitioning. The study showed that ENMs can significantly influence the adsorption and dispersion of hydrophobic/low water soluble contaminants. The type of ENM, the exposure to light, and the water pH have a significant influence on the partitioning of pollutants.