Nanoparticles as stationary and pseudo-station+ary phases in chromatographic and electrochromatographic separations

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Retention performance of alumina porous layer open-tubular column coated with γ-alumina nanoparticles in the highly volatile hydrocarbons separation

An alumina porous layer open-tubular (Al₂O₃ PLOT) column coated with γ-alumina nanoparticles (20 nm) for highly volatile hydrocarbons (C1 to C5) separation was described. Relative to the coating of bulk alumina, this column was easily coated with dynamic method under 0.4 or 0.6 MPa for 0.53 mm or 0.32 mm capillary, respectively. And the thickness of coating layer could be tuned by repeating the coating process after column was dried and activated at 300 °C for 3 h. The effect of deactivation agents on the physicochemical properties of nano γ-alumina was characterized by X-ray diffraction (XRD) measurement and nitrogen adsorption-desorption isotherms. The influences of deactivation agents, film thickness, conditioning and column dimensions on the inertness, polarity, selectivity and elution order of C1 to C5 separation were investigated in detail. The crystallite structure and size of nano alumina were not affected by the deactivation agents and remained constant during the column making processes, whereas specific surface area, pore volume and average half pore width altered significantly. The specific surface area decreased to 125.4 m² g^-1 or 174.0 m² g^-1 and the average half pore size distributions decreased to 1.6-8.4 nm or 2.4-14.3 nm when it was deactivated with potassium chloride or sodium sulfate solution, respectively. The deactivation agents and its concentrations impacted significantly on the retention performance of column. The column deactivated with sodium sulfate solution exhibited stronger polarity and lower selectivity than which deactivated with potassium chloride solution although both columns showed good inertness. The length, internal diameter and film thickness of the column had less influence on the selectivity and resolution for C1 to C5 hydrocarbons separation, whereas the conditioning temperature and time had an obvious influence. The column had distinguished polarity and selectivity which was different from either bulk or commercial alumina columns. Typically, the hydrocarbons were baseline separated with resolutions ranging from 1.65 to 15.33 within 9 min under programmed temperature below 100 °C, and the tailing factors ranging from 1.02 to 1.07.

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Polysaccharide-Based Chiral Stationary Phases on Gold Nanoparticles Modified Silica Beads for Liquid-Phase Separation of Enantiomers

Au nanoparticles (AuNPs) (10−15 nm in size) were prepared and deposited on the surfaces of silica particles functionalized using 3-aminopropyltriethoxysilane as the seeds under mild conditions. Then, Au seeds grew further and formed nanosheets by the method of gold chloride hydrate reduction. 3, 5-dimethylphenyl isocyanate derivative of cellulose as chiral selector was coated on the surfaces of SiO2/Au. The obtained spheres possessed a sandwich structure in which silica bead, the packed Au NPs monolayer and cellulose derivative were the core, the interlayer and the shell, respectively. The resultant packing material was evaluated by high-performance liquid chromatography (HPLC) as chiral stationary phase (CSP). The separations of nine pairs of enantiomers were achieved in the normal-phase liquid chromatography mode. The results showed that the new CSP has sufficient interaction with the analytes due to the existence of AuNPs on silica surfaces compared with coated cellulose-silica column.

Preparation of a thiols β-cyclodextrin/gold nanoparticles-coated open tubular column for capillary electrochromatography enantioseparations

Inspired by the distinct chemical and physical properties of nanoparticles, here a novel open-tubular capillary electrochromatography column was prepared by electrostatic assembly of poly(diallydimethylammonium chloride) onto the inner surface of a fused-silica capillary, followed by self-adsorption of negatively charged SH-β-cyclodextrin/gold nanoparticles. The formation of the SH-β-cyclodextrin/gold nanoparticles coated capillary was confirmed and characterized by scanning electron microscopy and energy dispersive spectrometry. The results of scanning electron microscopy and energy dispersive spectrometry studies indicated that SH-β-cyclodextrin/gold nanoparticles were successfully coated on the inner wall of the capillary column. The performance of the SH-β-cyclodextrin/gold nanoparticles coated capillary was validated by the analysis of six pairs of chiral drugs, namely zopiclone, carvedilol, salbutamol, terbutaline sulfate, phenoxybenzamine hydrochloride, and ibuprofen. Satisfactory enantioseparation results were achieved, confirming the use of gold nanoparticles as the support could enhance the phase ratio of the open-tubular capillary column. Additionally, the stability and reproducibility of the SH-β-cyclodextrin/gold nanoparticles coated capillary column were also investigated. Then, this proposed method was well validated with good linearity (≥0.999), recovery (90.0-93.5%) and repeatability, and was successfully used for enantioseparation of ibuprofen in spiked plasma samples, which indicated the new column's potential usage in biological analysis.

Recent Advances in Capillary Electrochromatography of Proteins and Carbohydrates in the Biopharmaceutical and Biomedical Field

Capillary electrochromatography (CEC) is a powerful hybrid separation technique that combines capillary electrophoresis and capillary chromatography, capable to address the analytical challenges of proteomics and glycomics. The focus of this paper is to review the recent developments in capillary electrochromatography of proteins and carbohydrates. The different column types applied in capillary electrochromatography such as packed bed, open tubular and monoliths are conferred in detail with respective separation examples. A comprehensive comparison is also given listing the mostly utilized coating methods, stationary phase materials and column preparation methods. The choice of porogenic solvent combinations for monolithic column fabrication is thoroughly discussed, paying close attention to the fine tuning options for the separation driving electroosmotic flow. Application examples of CEC in process analytical technology for the biopharmaceutical and biomarker discovery in the biomedical fields are also given.

Recent developments of monolithic and open-tubular capillary electrochromatography (2017-2019)

Capillary electrochromatography, which combined the high selectivity of high-performance liquid chromatography and the high separation efficiency of capillary electrophoresis, is an attractive separation tool. In this review, the developments on monolithic and open tubular capillary electrochromatography during 2017 to August 2019 are summarized. Considering the development of novel stationary phases is the most active research field in capillary electrochromatography, monolithic capillary electrochromatography is classified according to the polymer-based and hybrid monolithic columns, while open-tubular capillary electrochromatography is categorized by cyclodextrin, silica, polymer, nanomaterials, microporous materials, and biomaterials-based open tubular columns.

Recent advances in nanomaterial-based capillary electrophoresis

This review gives a summary of applications of different nanomateials, such as gold nanoparticles (AuNPs), carbon-based nanoparticles, magnetic nanoparticles (MNPs), and nano-sized metal organic frameworks (MOFs), in electrophoretic separations. This review also emphasizes the recent works in which nanoparticles (NPs) are used as pseudostationary phase (PSP) or immobilized on the capillary surface for enhancement of separation in CE, CEC, and microchips electrophoresis.

Recent developments in open tubular capillary electrochromatography from 2016 to 2017

Interest in open-tubular capillary electrochromatography (OT-CEC) continues to thrive because of the inherent advantage of OT-CEC combining the high efficiency of capillary electrophoresis and the high selectivity of high performance liquid chromatography. For the period 2016 to 2017, novel materials have been developed as first-time stationary phases for OT-CEC and are grouped in this review as polymer-based materials, frameworks, nanoparticles, graphene-based materials, and biomaterials. Coating and fabrication methods mostly rely on covalent coating strategies while non-covalent immobilisation strategies like electrostatic assembly are notably still being employed. The concern of overcoming phase ratio challenges in OT-CEC coatings have also generated adoption of combined coating strategies including multi-layering, layer-by-layer self-assembly and methods adapted from nanofilm fabrications like epitaxial growth, liquid phase deposition, or nucleation of crystal growth. The emergence of non-conventional coating characterisation methods such as transmission electron microscopy, X-ray diffraction or X-ray photoelectron spectroscopy is also discussed.

Polymer brush decorated nanoparticles immobilised on polymer monoliths for enhanced biopolymer elution

Polymer monoliths uniformly covered with polymer brush nanoparticles are fabricated and the elution properties investigated with myoglobin and blue dextran.

Recent developments in capillary and microchip electroseparations of peptides (2011-2013)

The review presents a comprehensive survey of recent developments and applications of capillary and microchip electroseparation methods (zone electrophoresis, ITP, IEF, affinity electrophoresis, EKC, and electrochromatography) for analysis, isolation, purification, and physicochemical and biochemical characterization of peptides. Advances in the investigation of electromigration properties of peptides, in the methodology of their analysis, including sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, as well as in detection of peptides, are presented. New developments in particular CE and CEC modes are reported and several types of their applications to peptide analysis are described: conventional qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC techniques to provide relevant physicochemical characteristics of peptides are demonstrated.

Recent advances in preparation and application of hybrid organic-silica monolithic capillary columns

Hybrid organic-silica monolithic columns, regarded as a second generation of silica-based monoliths, have received much interest due to their unique properties over the pure silica-based monoliths. This review mainly focuses on development in the fields of preparation of hybrid monolithic columns in a capillary and their application for CEC and capillary liquid chromatography separation, as well as for sample pretreatment of solid-phase microextraction and immobilized enzyme reactor since July 2010. The preparation approaches are comprehensively summarized with three routes: (i) general sol-gel process using trialkoxysilanes and tetraalkoxysilanes as coprecursors; (ii) "one-pot" process of alkoxysilanes and organic monomers concomitantly proceeding sol-gel chemistry and free radical polymerization; and (iii) other polymerization approaches of organic monomers containing silanes. The modification of hybrid monoliths containing reactive groups to acquire the desired surface functionality is also described.