Green sample-preparation methods using room-temperature ionic liquids for the chromatographic analysis of organic compounds

Selectivity evaluation of extraction systems

Extraction is the most common sample preparation technique prior to chromatographic analysis for samples which are too complex, too dilute, or contain matrix components incompatible with the further use of the separation system or interfere in the detection step. The most important extraction techniques are biphasic systems involving the transfer of target compounds from the sample to a different phase ideally accompanied by no more than a tolerable burden of co-extracted matrix compounds. The solvation parameter model affords a general framework to characterize biphasic extraction systems in terms of their relative capability for solute-phase intermolecular interactions (dispersion, dipole-type, hydrogen bonding) and within phase solvent-solvent interactions for cavity formation (cohesion). The approach is general and allows the comparison of liquid and solid extraction phases using the same terms and is used to explain the features important for the selective enrichment of target compounds by a specific extraction phase using solvent extraction, liquid-liquid extraction, and solid-phase extraction for samples in a gas, liquid, or solid phase. Hierarchical cluster analysis with the system constants of the solvation parameter model as variables facilitates the selection of solvents for extraction, the identification of liquid-liquid distribution systems with non-redundant selectivity, and evaluation of different approaches using liquids and solids for the isolation of target compounds from different matrices.

Advances Brought by Hydrophilic Ionic Liquids in Fields Involving Pharmaceuticals

The negligible volatility and high tunable nature of ionic liquids (ILs) have been the main drivers of their investigation in a wide diversity of fields, among which is their application in areas involving pharmaceuticals. Although most literature dealing with ILs is still majorly devoted to hydrophobic ILs, evidence on the potential of hydrophilic ILs have been increasingly provided in the past decade, viz., ILs with improved therapeutic efficiency and bioavailability, ILs with the ability to increase drugs' aqueous solubility, ILs with enhanced extraction performance for pharmaceuticals when employed in biphasic systems and other techniques, and ILs displaying low eco/cyto/toxicity and beneficial biological activities. Given their relevance, it is here overviewed the applications of hydrophilic ILs in fields involving pharmaceuticals, particularly focusing on achievements and advances witnessed during the last decade. The application of hydrophilic ILs within fields involving pharmaceuticals is here critically discussed according to four categories: (i) to improve pharmaceuticals solubility, envisioning improved bioavailability; (ii) as IL-based drug delivery systems; (iii) as pretreatment techniques to improve analytical methods performance dealing with pharmaceuticals, and (iv) in the recovery and purification of pharmaceuticals using IL-based systems. Key factors in the selection of appropriate ILs are identified. Insights and perspectives to bring renewed and effective solutions involving ILs able to compete with current commercial technologies are finally provided.

Determination of physicochemical properties of ionic liquids by gas chromatography

Over the years room temperature ionic liquids have gained attention as solvents with favorable environmental and technical features. Both chromatographic and conventional methods afford suitable tools for the study of their physicochemical properties. Use of gas chromatography compared to conventional methods for the measurement of physicochemical properties of ionic liquids have several advantages; very low sample concentrations, high accuracy, faster measurements, use of wider temperature range and the possibility to determine physicochemical properties of impure samples. Also, general purpose gas chromatography instruments are widely available in most laboratories thus alleviating the need to purchase more specific instruments for less common physiochemical measurements. Some of the main types of physicochemical properties of ionic liquids accessible using gas chromatography include gas-liquid partition constants, infinite dilution activity coefficients, partial molar quantities, solubility parameters, system constants of the solvation parameter model, thermal stability, transport properties, and catalytic and other surface properties.

Preparative purification of corilagin from Phyllanthus by combining ionic liquid extraction, prep-HPLC, and precipitation

In this study, a green extraction and purification process for the rapid preparation of corilagin from Phyllanthus has been designed using an aqueous ionic liquid coupled with preparative high-performance liquid chromatography (prep-HPLC) and precipitation. The results showed that the optimum extraction process for corilagin involved mixing Phyllanthus tenellus Roxb. with 0.4 M [BMIm]Br at a liquid-solid ratio of 10 : 1 and dispersing the mixture by ultrasonication at 50 °C for 15 min. Macroporous resin D101 and prep-HPLC were employed for [BMIm]Br removal and corilagin separation to yield corilagin of 86.49% purity. Subsequently, corilagin was further purified by water precipitation to achieve 99.12% purity. The results indicated the successful development of a new rapid and green process to prepare corilagin on a large scale from plants using [BMIm]Br. This promising process can be applied for the preparative separation and purification of other active compounds from complex plant systems.

Recent Advances in Applications of Ionic Liquids in Miniaturized Microextraction Techniques

Green sample preparation is one of the most challenging aspects in green analytical chemistry. In this framework, miniaturized microextraction techniques have been developed and are widely performed due to their numerous positive features such as simplicity, limited need for organic solvents, instrumentation of low cost and short time of extraction. Also, ionic liquids (ILs) have unequivocally a “green” character, which they owe to their unique properties including the re-usage, the high reaction efficiency and selectivity in room temperature, the ability to dissolve both organic and inorganic compounds, and thermal stability. In the present review, the recent advances in the application of ionic liquids in miniaturized liquid and solid phase extraction techniques as extractants, intermediate solvents, mediators and desorption solvents are discussed, quoting the advantages and drawbacks of each individual technique. Some of the most important sample preparation techniques covered include solid-phase microextraction (SPME), dispersive liquid-liquid microextraction (DLLME), single-drop microextraction (SDME), stir bar sorptive extraction (SBSE), and stir cake sorptive extraction (SCSE).

Quantification of Meloxicam in Human Plasma Using Ionic Liquid-Based Ultrasound-Assisted In Situ Solvent Formation Microextraction Followed by High-Performance Liquid Chromatography

A robust extraction method against the variations of sample ionic strength viz. ionic liquid-based ultrasound-assisted in situ solvent formation microextraction (IL-UA-ISFME) was coupled for the first time with high-performance liquid chromatography-ultraviolet detection (HPLC-UV), and successfully used as a more sustainable approach for the determination of meloxicam (MEL) in human plasma. Herein, a hydrophobic IL (1-butyl-3-methylimidazolium hexafluorophosphate) was formed by adding a hydrophilic IL (1-butyl-3-methylimidazolium tetrafluoroborate) to aqueous sample solution containing an ion-exchange reagent (sodium hexafluorophosphate). The target analyte was transferred into the IL medium while the extraction solvent was completely dispersed into the sample using ultrasonic irradiation and then, the settled enriched phase was injected to HPLC. Firstly, main factors affecting the microextraction performance were evaluated and optimized. The linearity was in the range of 5-1,500 ng mL-1 with regression coefficient corresponding to 0.997. Limits of detection (LOD; signal-to-noise ratio (S/N) = 3) and quantification (LOQ, S/N = 10) were 1 and 5 ng mL-1, respectively. An acceptable recovery range of 82.1-93.6% and satisfactory intra-assay (3.6-4.8%, n = 6) and inter-assay (3.3-5.1%, n = 9) precision as well as remarkable sample clean up exhibited good efficiency of the method. The freeze-thaw stability study was performed for samples and standard solutions. To study the applicability of the proposed method, it was employed for the determination of MEL in human plasma after oral administration of the drug and some pharmacokinetic data were achieved. The technique proved to be accurate and reliable for the screening intentions.

Ionic liquid-based headspace in-tube liquid-phase microextraction coupled with capillary electrophoresis for sensitive detection of phenols

An ionic liquid-based headspace in-tube liquid-phase microextraction (IL-HS-ITLPME) in-line coupled with capillary electrophoresis (CE) is proposed. The method is capable of quantifying trace amounts of phenols in environmental water samples. In the newly developed method, simply by placing a capillary injected with IL in the HS above the aqueous sample, volatile phenols were extracted into the IL acceptor phase in the capillary. After extraction, electrophoresis of the phenols in the capillary was carried out. Extraction parameters such as the extraction time, extraction temperature, ionic strength, volume of the sample solution and IL types were systematically investigated. Under the optimized conditions, enrichment factors for four phenols were from 1510 to 1985. The proposed method provided a good linearity, low limits of detection (below 5.0 ng mL-1 ), and good repeatability of the extractions (RSDs below 6.7%, n = 6). This method was then utilized to analyze two real environmental samples of Xiaoxi Lake and tap water, obtaining acceptable recoveries and precisions. Compared with the usual HS-ITLPME for CE, IL-HS-ITLPME-CE is a simple, low-cost, fast and environmentally friendly pre-concentration technique. This article is protected by copyright. All rights reserved.

Advances, challenges and opportunities for point-of-need screening of mycotoxins in foods and feeds

Recent advances in analytical methods for mycotoxin screening in foods and feeds are reviewed, focusing on point-of-need detection using integrated devices.

Green Ultrasound versus Conventional Synthesis and Characterization of Specific Task Pyridinium Ionic Liquid Hydrazones Tethering Fluorinated Counter Anions: Novel Inhibitors of Fungal Ergosterol Biosynthesis

A series of specific task ionic liquids (ILs) based on a pyridiniumhydrazone scaffold in combination with hexafluorophosphate (PF₆-), tetrafluoroboron (BF₄-) and/or trifluoroacetate (CF₃COO-) counter anion, were designed and characterized by IR, NMR and mass spectrometry. The reactions were conducted under both conventional and green ultrasound procedures. The antifungal potential of the synthesized compounds 2-25 was investigated against 40 strains of Candida (four standard and 36 clinical isolates). Minimum inhibitory concentrations (MIC90) of the synthesized compounds were in the range of 62.5-2000 μg/mL for both standard and oral Candida isolates. MIC90 results showed that the synthesized 1-(2-(4-chlorophenyl)-2-oxoethyl)-4-(2-(4-fluorobenzylidene)hydrazinecarbonyl)-pyridin-1-ium hexafluorophosphate (11) was found to be most effective, followed by 4-(2-(4-fluorobenzylidene)hydrazinecarbonyl)-1-(2-(4-nitrophenyl)-2-oxoethyl)-pyridin-1-ium hexafluorophosphate (14) and 1-(2-ethoxy-2-oxoethyl)-4-(2-(4-fluorobenzylidene)hydrazinecarbonyl)pyridin-1-ium hexafluorophosphate (8). All the Candida isolates showed marked sensitivity towards the synthesized compounds. Ergosterol content was drastically reduced by more active synthesized compounds, and agreed well with MIC90 values. Confocal scanning laser microscopy (CLSM) results showed that the red colored fluorescent dye enters the test agent treated cells, which confirms cell wall and cell membrane damage. The microscopy results obtained suggested membrane-located targets for the action of these synthesized compounds. It appears that the test compounds might be interacting with ergosterol in the fungal cell membranes, decreasing the membrane ergosterol content and ultimately leading to membrane disruption as visible in confocal results. The present study indicates that these synthesized compounds show significant antifungal activity against Candida which forms the basis to carry out further in vivo experiments before their clinical use.

Recent advances on ionic liquid uses in separation techniques

The molten organic salts with melting point below 100°C, commonly called ionic liquids (ILs) have found numerous uses in separation sciences due to their exceptional properties as non molecular solvents, namely, a negligible vapor pressure, a high thermal stability, and unique solvating properties due to polarity and their ionic character of molten salts. Other properties, such as viscosity, boiling point, water solubility, and electrochemical window, are adjustable playing with which anion is associated with which cation. This review focuses on recent development of the uses of ILs in separation techniques actualizing our 2008 article (same authors, J. Chromatogr. A, 1184 (2008) 6-18) focusing on alkyl methylimidazolium salts. These developments include the use of ILs in nuclear waste reprocessing, highly thermally stable ILs that allowed for the introduction of polar gas chromatography capillary columns able to work at temperature never seen before (passing 300°C), the use of ILs in liquid chromatography and capillary electrophoresis, and the introduction of tailor-made ILs for mass spectrometry detection of trace anions at the few femtogram level. The recently introduced deep eutectic solvents are not exactly ILs, they are related enough so that their properties and uses in countercurrent chromatography are presented.

Ultrasound assisted extraction of Maxilon Red GRL dye from water samples using cobalt ferrite nanoparticles loaded on activated carbon as sorbent: Optimization and modeling

In this research, a selective, simple and rapid ultrasound assisted dispersive solid-phase micro-microextraction (UA-DSPME) was developed using cobalt ferrite nanoparticles loaded on activated carbon (CoFe₂O₄-NPs-AC) as an efficient sorbent for the preconcentration and determination of Maxilon Red GRL (MR-GRL) dye. The properties of sorbent are characterized by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Vibrating sample magnetometers (VSM), Fourier transform infrared spectroscopy (FTIR), Particle size distribution (PSD) and Scanning Electron Microscope (SEM) techniques. The factors affecting on the determination of MR-GRL dye were investigated and optimized by central composite design (CCD) and artificial neural networks based on genetic algorithm (ANN-GA). CCD and ANN-GA were used for optimization. Using ANN-GA, optimum conditions were set at 6.70, 1.2mg, 5.5min and 174μL for pH, sorbent amount, sonication time and volume of eluent, respectively. Under the optimized conditions obtained from ANN-GA, the method exhibited a linear dynamic range of 30-3000ngmL^-1 with a detection limit of 5.70ngmL^-1. The preconcentration factor and enrichment factor were 57.47 and 93.54, respectively with relative standard deviations (RSDs) less than 4.0% (N=6). The interference effect of some ions and dyes was also investigated and the results show a good selectivity for this method. Finally, the method was successfully applied to the preconcentration and determination of Maxilon Red GRL in water and wastewater samples.

A simple method for point-of-need extraction, concentration and rapid multi-mycotoxin immunodetection in feeds using aqueous two-phase systems

The rapid detection of mycotoxins in feed samples is becoming an increasingly relevant challenge for the food production sector, in order to effectively enforce current regulations and assure food and feed safety. To achieve rapid mycotoxin detection, several biosensing strategies have been published, many reaching assay times of the order of a few minutes. However, the vast majority of these rely on sample preparation based on volatile organic solvents, often comprising complex multi-step procedures and devoid of clean-up and/or concentration effects. Here, a novel sample preparation methodology based on a green, non-toxic and inexpensive polyethylene glycol-sodium citrate aqueous two-phase system is reported, providing single-step extraction and concentration of three target mycotoxins within 20min: aflatoxin B1 (AFB1), ochratoxin A (OTA) and deoxynivalenol (DON). With point-of-need applications in mind, the extraction procedure was optimized and validated using a rapid multi-toxin microfluidic competitive immunoassay. The assay was successfully tested with spiked complex solid matrices including corn, soy, chickpea and sunflower-based feeds and limits of detection of 4.6ngg-1±15.8%, 24.1ngg-1±8.1% and 129.7ngg-1±53.1% (±CV) were obtained in corn for AFB1, OTA and DON, respectively. These sensitivities are fit-for-purpose at the required regulatory and recommended limits for animal feed, providing an effective and safe semi-quantitative mycotoxin analysis that can be performed in the field.

Deep eutectic solvent-based liquid phase microextraction for the determination of pharmaceuticals and personal care products in fish oil

The analytical method of PPCPs in fish oil was first developed based on the green solvent DES.