1
|
Marzouk SAM, Abu Namous AJ. Gas Identification by Simultaneous Permeation through Parallel Membranes: Proof of Concept. Anal Chem 2022; 94:11134-11143. [PMID: 35920637 DOI: 10.1021/acs.analchem.2c00801] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
This paper describes an experimental system for simultaneous permeation of a pressurized test gas through different gas permeable membranes and provides a proof of concept for a novel approach for gas identification/fingerprinting for potential construction of electronic noses. The design, construction, and use of a six-channel system which allows simultaneous gas permeation from a single pressurized gas compartment through six different parallel membranes are presented. The permeated gas is accumulated in confined spaces behind the respective membranes. The rate of gas pressure accumulation behind each membrane is recorded and used as a measure of the gas permeation rate through the membrane. The utilized gas permeable membranes include Teflon AF, silicone rubber, track-etch hydrophilic polycarbonate, track-etch hydrophobic polycarbonate, track-etch polyimide, nanoporous anodic aluminum oxide, zeolite ZSM-5, and zeolite NaY. An analogy between the rate of pressure accumulation of the permeating gas behind the membrane and the charging of an electric capacitor in a single series RC circuit is proposed and thoroughly validated. The simultaneous permeation rates through different membranes demonstrated a very promising potential as characteristic fingerprints for 10 test gases, that is, helium, neon, argon, hydrogen, nitrogen, carbon dioxide, methane, ethane, propane, and ethylene, which are selected as representative examples of mono-, di-, tri-, and polyatomic gases and to include some homologous series as well as to allow testing the potential of the proposed system to discriminate between closely related gases such as ethane and ethylene or carbon dioxide and propane which have almost identical molecular masses. Finally, a preliminary investigation of the possibility of applying the developed gas permeation system for semiquantitative analysis of the CO2-N2 binary mixture is also presented.
Collapse
Affiliation(s)
- Sayed A M Marzouk
- Department of Chemistry, UAE University, Al Ain 15551, United Arab Emirates
| | | |
Collapse
|
2
|
Joseph A, Rajendran A, Karthikeyan A, Nair BG. Implantable Microfluidic Device: An Epoch of Technology. Curr Pharm Des 2021; 28:679-689. [PMID: 34525928 DOI: 10.2174/1381612827666210825114403] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Accepted: 05/28/2021] [Indexed: 11/22/2022]
Abstract
Implantable microfluidic devices are milestones in developing devices that can either measure parameters like ocular pressure and blood glucose level or deliver various components for therapeutic needs or behavioral modification. Researchers are currently focusing on the miniaturization of almost all its tools for a better healthcare platform. Implantable microfluidic devices are a combination of various systems including, but not limited to, microfluidic platforms, reservoirs, sensors, and actuators, implanted inside the body of a living entity (in vivo) with the purpose of directly or indirectly helping the entity. It is a multidisciplinary approach with immense potential in the area of the biomedical field. Significant resources are utilizing on for the research and development of these devices for various applications. The induction of an implantable microfluidic device into an animal would enable us to measure the responses without any repeated invasive procedures. Such data would help in the development of a better drug delivery profile. Implantable microfluidic devices with reservoirs deliver specific chemical or biological products to treat situations like cancers and diabetes. They can also deliver fluorophores for specific imaging inside the body. Implantable microfluidic devices help provide a microenvironment for various cell differentiation procedure. These devices know no boundaries, and this article reviews these devices based on their design and applications.
Collapse
Affiliation(s)
- Abey Joseph
- School of Biotechnology, National Institute of Technology, Calicut, Kerala, India; b Institute of Advanced Energy, Kyoto University; c RIKEN, Nanomedical Engineering Laboratory. Japan
| | - Arivazhagan Rajendran
- School of Biotechnology, National Institute of Technology, Calicut, Kerala, India; b Institute of Advanced Energy, Kyoto University; c RIKEN, Nanomedical Engineering Laboratory. Japan
| | - Akash Karthikeyan
- School of Biotechnology, National Institute of Technology, Calicut, Kerala, India; b Institute of Advanced Energy, Kyoto University; c RIKEN, Nanomedical Engineering Laboratory. Japan
| | - Baiju G Nair
- School of Biotechnology, National Institute of Technology, Calicut, Kerala, India; b Institute of Advanced Energy, Kyoto University; c RIKEN, Nanomedical Engineering Laboratory. Japan
| |
Collapse
|
3
|
Correa CBM, Kogawa AC, Chorilli M, Salgado HRN. Miniaturized Microbiological Method to Determine the Potency of Rifaximin in Tablets. J AOAC Int 2021; 104:1049-1054. [PMID: 33512492 DOI: 10.1093/jaoacint/qsab017] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/03/2020] [Revised: 01/21/2021] [Accepted: 01/21/2021] [Indexed: 12/19/2022]
Abstract
BACKGROUND Rifaximin, a semi-synthetic antimicrobial, does not present microbiological method described in official compendia, and there is a lack of literature on this topic. The quality control of antimicrobials is extremely important to evaluate the real potency of pharmaceutical products. OBJECTIVE A miniaturized turbidimetric method for determining the potency of rifaximin in tablets was developed and validated by turbidimetry, according to the international guidelines. METHOD Escherichia coli ATCC 10536 IAL 2393, brain heart infusion (BHI) broth, inoculum at 8%, rifaximin in purified water with 20% ethanol at 5, 10, and 20 μg/mL and 530 nm were used. RESULTS The method was considered selective for rifaximin, as the adjuvants did not show activity; linear with correlation coefficients 0.9998 for standard and 0.9999 for sample; accurate with 99.73% recovery; precise with RSD less than 3%; and robust in the face of small variations in (i) rifaximin volume, (ii) proportion of ethanol, (iii) inoculum volume. CONCLUSIONS The method is considered adequate and safe to evaluate the potency of rifaximin in tablets, contemplating speed, low cost, low waste generation, and ease of operation. HIGHLIGHTS This work usescurrent, sustainable, and green analytical chemistry and can be used in the routine analyses of rifaximin by laboratories and the pharmaceutical industry around the world.
Collapse
Affiliation(s)
- Clara Bersi Motta Correa
- São Paulo State University, School of Pharmaceutical Sciences, Department of Drugs and Medicines, Araraquara, SP, Brazil
| | - Ana Carolina Kogawa
- Universidade Federal de Goiás, Faculdade de Farmácia, Laboratório de Controle de Qualidade, Goiânia, Goiás, Brazil
| | - Marlus Chorilli
- São Paulo State University, School of Pharmaceutical Sciences, Department of Drugs and Medicines, Araraquara, SP, Brazil
| | - Hérida Regina Nunes Salgado
- São Paulo State University, School of Pharmaceutical Sciences, Department of Drugs and Medicines, Araraquara, SP, Brazil
| |
Collapse
|
4
|
Makela M, Gordon P, Tu D, Soliman C, Coté GL, Maitland K, Lin PT. Benzene Derivatives Analysis Using Aluminum Nitride Waveguide Raman Sensors. Anal Chem 2020; 92:8917-8922. [PMID: 32460484 DOI: 10.1021/acs.analchem.0c00809] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Raman spectroscopy using aluminum nitride (AlN) optical waveguides was demonstrated for organic compound analysis. The AlN waveguide device was prepared by reactive sputtering deposition and complementary-metal-oxide semiconductor (CMOS) processes. A fundamental waveguide mode was observed over a broad visible spectrum and the waveguide evanescent wave was used to excite the Raman signals of the test analytes. The performance of the waveguide sensor was characterized by measuring the Raman spectra of the benzene derivative mixtures consisting of benzene, anisole, and toluene. The compositions and concentrations were resolved by correlating the obtained Raman spectrum with the characteristic Raman peaks associated with C-C, C-H, and C-O functional groups. With the advantages of real-time detection and enhanced Raman signal intensity, the AlN waveguides provided a sensor platform for nondestructive and online chemical compound monitoring.
Collapse
|
5
|
Miniaturized technologies for high-throughput drug screening enzymatic assays and diagnostics – A review. Trends Analyt Chem 2020. [DOI: 10.1016/j.trac.2020.115862] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
6
|
Microfluidic-Based Approaches for Foodborne Pathogen Detection. Microorganisms 2019; 7:microorganisms7100381. [PMID: 31547520 PMCID: PMC6843441 DOI: 10.3390/microorganisms7100381] [Citation(s) in RCA: 39] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2019] [Revised: 09/15/2019] [Accepted: 09/16/2019] [Indexed: 12/18/2022] Open
Abstract
Food safety is of obvious importance, but there are frequent problems caused by foodborne pathogens that threaten the safety and health of human beings worldwide. Although the most classic method for detecting bacteria is the plate counting method, it takes almost three to seven days to get the bacterial results for the detection. Additionally, there are many existing technologies for accurate determination of pathogens, such as polymerase chain reaction (PCR), enzyme linked immunosorbent assay (ELISA), or loop-mediated isothermal amplification (LAMP), but they are not suitable for timely and rapid on-site detection due to time-consuming pretreatment, complex operations and false positive results. Therefore, an urgent goal remains to determine how to quickly and effectively prevent and control the occurrence of foodborne diseases that are harmful to humans. As an alternative, microfluidic devices with miniaturization, portability and low cost have been introduced for pathogen detection. In particular, the use of microfluidic technologies is a promising direction of research for this purpose. Herein, this article systematically reviews the use of microfluidic technology for the rapid and sensitive detection of foodborne pathogens. First, microfluidic technology is introduced, including the basic concepts, background, and the pros and cons of different starting materials for specific applications. Next, the applications and problems of microfluidics for the detection of pathogens are discussed. The current status and different applications of microfluidic-based technologies to distinguish and identify foodborne pathogens are described in detail. Finally, future trends of microfluidics in food safety are discussed to provide the necessary foundation for future research efforts.
Collapse
|
7
|
López-Sanz S, Guzmán Bernardo FJ, Rodríguez Martín-Doimeadios RC, Ríos Á. Analytical metrology for nanomaterials: Present achievements and future challenges. Anal Chim Acta 2019; 1059:1-15. [DOI: 10.1016/j.aca.2019.02.009] [Citation(s) in RCA: 22] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2018] [Revised: 02/05/2019] [Accepted: 02/07/2019] [Indexed: 02/01/2023]
|
8
|
Abstract
BACKGROUND Miniaturization has not only driven microelectronics and generated new unforeseen options but has also dramatically changed sensors and analytics. DEVELOPMENTS The Lab on a Chip (LOC) technology enables laboratory processes to run fully automated in canals in the micrometre range. The biggest challenge for LOC is to keep production costs low despite miniaturization and application-specific design. If this is achieved medical laboratory analyses can usually be carried out faster and with less hands on time. This explains why LOCs are already integrated into many laboratory instruments and why point-of-care testing (POCT) can no longer be imagined without it. New markers, such as in liquid biopsies and measurement techniques, such as Raman spectroscopy and mass spectroscopy, create further potentials that will enable faster and more specific laboratory analyses to be made using LOC technology. CONCLUSION The LOC technology has the potential of changing the medical practice especially in cases when the central laboratory is not available or is unable to provide results fast enough.
Collapse
Affiliation(s)
- Klaus S Drese
- ISAT - Institut für Sensor- und Aktortechnik, Hochschule für angewandte Wissenschaften Coburg, Am Hofbräuhaus 1b, 96450, Coburg, Deutschland.
| |
Collapse
|
9
|
A High Aspect Ratio Bifurcated 128-Microchannel Microfluidic Device for Environmental Monitoring of Explosives. SENSORS 2018; 18:s18051568. [PMID: 29762499 PMCID: PMC5982650 DOI: 10.3390/s18051568] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/27/2018] [Revised: 05/09/2018] [Accepted: 05/10/2018] [Indexed: 12/17/2022]
Abstract
Design and evolution of explosives monitoring and detection platforms to address the challenges of trace level chemical identification have led investigations into the use of intricately designed microfluidic devices. Microfluidic devices are unique tools that possess distinct characteristics that, when designed properly and configured with optical and fluidic components, can produce detection platforms with unmatched performance levels. Herein, we report the design, fabrication and integration of a bifurcated high aspect ratio microfluidic device containing 128 microchannels (40 mm × 40 μm × 250 μm; L × W × H) for explosives detection at trace levels. Aspect ratios measuring >6:1 support improved receptor-target molecule interactions, higher throughput and extremely low limits of detection (LOD). In addition to superior assay sensitivity, the bifurcated microfluidic device provides greater durability and versatility for substrate modification. Using the explosive 2,4,6-trinitrotoluene (TNT) as the model compound in a fluorescence-based displacement immunoassay, we report LODs for TNT at 10 parts-per-trillion (pptr) using a neutravidin-coated biotinylated anti-TNT microfluidic device. Solution to wall interactions were also simulated in COMSOL Multiphysics to understand fluid flow characteristics. Reynolds numbers were calculated to be 0.27⁻2.45 with a maximum pressure of 1.2 × 10-2 psi.
Collapse
|
10
|
Class-modelling in food analytical chemistry: Development, sampling, optimisation and validation issues - A tutorial. Anal Chim Acta 2017; 982:9-19. [PMID: 28734370 DOI: 10.1016/j.aca.2017.05.013] [Citation(s) in RCA: 105] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2016] [Revised: 05/11/2017] [Accepted: 05/16/2017] [Indexed: 11/22/2022]
Abstract
Qualitative data modelling is a fundamental branch of pattern recognition, with many applications in analytical chemistry, and embraces two main families: discriminant and class-modelling methods. The first strategy is appropriate when at least two classes are meaningfully defined in the problem under study, while the second strategy is the right choice when the focus is on a single class. For this reason, class-modelling methods are also referred to as one-class classifiers. Although, in the food analytical field, most of the issues would be properly addressed by class-modelling strategies, the use of such techniques is rather limited and, in many cases, discriminant methods are forcedly used for one-class problems, introducing a bias in the outcomes. Key aspects related to the development, optimisation and validation of suitable class models for the characterisation of food products are critically analysed and discussed.
Collapse
|
11
|
Blue LE, Franklin EG, Godinho JM, Grinias JP, Grinias KM, Lunn DB, Moore SM. Recent advances in capillary ultrahigh pressure liquid chromatography. J Chromatogr A 2017; 1523:17-39. [PMID: 28599863 DOI: 10.1016/j.chroma.2017.05.039] [Citation(s) in RCA: 47] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/15/2017] [Revised: 05/12/2017] [Accepted: 05/15/2017] [Indexed: 11/28/2022]
Abstract
In the twenty years since its initial demonstration, capillary ultrahigh pressure liquid chromatography (UHPLC) has proven to be one of most powerful separation techniques for the analysis of complex mixtures. This review focuses on the most recent advances made since 2010 towards increasing the performance of such separations. Improvements in capillary column preparation techniques that have led to columns with unprecedented performance are described. New stationary phases and phase supports that have been reported over the past decade are detailed, with a focus on their use in capillary formats. A discussion on the instrument developments that have been required to ensure that extra-column effects do not diminish the intrinsic efficiency of these columns during analysis is also included. Finally, the impact of these capillary UHPLC topics on the field of proteomics and ways in which capillary UHPLC may continue to be applied to the separation of complex samples are addressed.
Collapse
Affiliation(s)
- Laura E Blue
- Process Development, Amgen Inc., Thousand Oaks, CA 91320, USA
| | - Edward G Franklin
- HPLC Research & Development, Restek Corp., Bellefonte, PA 16823, USA
| | - Justin M Godinho
- Department of Chemistry, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA
| | - James P Grinias
- Department of Chemistry and Biochemistry, Rowan University, Glassboro, NJ 08028, USA.
| | - Kaitlin M Grinias
- Department of Product Development & Supply, GlaxoSmithKline, King of Prussia, PA 19406, USA
| | - Daniel B Lunn
- Department of Chemistry, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA
| | | |
Collapse
|
12
|
Sun AL, Qi QA. Silver-functionalized g-C3N4 nanohybrids as signal-transduction tags for electrochemical immunoassay of human carbohydrate antigen 19-9. Analyst 2016; 141:4366-72. [PMID: 27183220 DOI: 10.1039/c6an00696e] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/30/2023]
Abstract
A simple and feasible electrochemical immunosensing platform was developed for highly efficient screening of a disease-related protein (human carbohydrate antigen 19-9, CA 19-9 used in this case) using silver-functionalized g-C3N4 nanosheets (Ag/g-C3N4) as signal-transduction tags. Initially, Ag/g-C3N4 nanohybrids were synthesized by combining thermal polymerization of the melamine precursor with the photo-assisted reduction method. Thereafter, the as-synthesized Ag/g-C3N4 nanohybrids were utilized for the labeling of the anti-CA 19-9 detection antibody by using a typical carbodiimide coupling method. The assay was carried out on a capture antibody-modified glassy carbon electrode in a sandwich-type detection mode. The detectable signal mainly derived from the voltammetric characteristics of the immobilized nanosilver particles on the g-C3N4 nanosheets within the applied potentials. Under the optimal conditions, the voltammetric peak currents increased with the increasing amount of target CA 19-9, and exhibited a wide linear range from 5.0 mU mL(-1) to 50 U mL(-1) with a detection limit of 1.2 mU mL(-1). Our strategy also displayed good reproducibility, precision and specificity. The results of the analysis of clinical serum specimens were in good accordance with the results obtained by an enzyme-linked immunosorbent assay (ELISA) method. The newly developed immunosensing system is promising for enzyme-free and cost-effective analysis of low-abundance proteins.
Collapse
Affiliation(s)
- Ai-Li Sun
- Department of Chemistry and Chemical Engineering, Xinxiang University, Xinxiang 453000, P.R. China.
| | | |
Collapse
|
13
|
Automation of static and dynamic non-dispersive liquid phase microextraction. Part 1: Approaches based on extractant drop-, plug-, film- and microflow-formation. Anal Chim Acta 2016; 906:22-40. [DOI: 10.1016/j.aca.2015.11.038] [Citation(s) in RCA: 72] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/16/2015] [Revised: 11/29/2015] [Accepted: 11/30/2015] [Indexed: 12/29/2022]
|