High molecular-shape-selective stationary phases for reversed-phase liquid chromatography: A review

Preparation of two amphiphilic dendritic small molecule gelators based on poly (aryl ether) modified silica-based chromatographic stationary phases and molecular shape recognition for shape-restricted isomers

Geometric isomers tend to have similar polarities and differ only in molecular shape. Vigorously developing new stationary phases to meet the requirements for the separation of isomers that have similar physicochemical properties is still an urgent topic in separation science. Poly (arylene ether)-based dendrimers are known for their multifunctional branched peripheral structures and high self-assembly properties. In this paper, two amphiphilic dendritic organic small molecule gelling agents based on poly (aryl ether), PAE-ANT and PAE-PA, were prepared and conjugated to the silica surface. SiO2@PAE-ANT and SiO2@PAE-PA were used as HPLC stationary phases for the separation of non-polar shape-restricted isomers. Both stationary phases have very high molecular shape selectivity for isomers such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), tocopherols and carotenoids. Separation of cis-trans geometric isomers such as diethylstilbestrol and polar compounds such as monosubstituted benzenes and anilines can also be achieved. These two columns offer more flexible selectivity and higher separation performance than commercial C18 and phenyl columns. There is a difference in molecular shape selectivity between the two stationary phases for the same analyte test probes. SiO2@PAE-ANT showed slightly better linear selectivity for non-polar shape-restricted isomers compared to SiO2@PAE-PA with Janus-type PAE-PA bonding phase. This separation behavior may be attributed to the ordered spatial structure formed by the gel factor on the surface of the stationary phase and the combined effect of multiple weak interaction centers (hydrophobic, hydrophilic, hydrogen bonding and π-π interactions). It was also possible to separate nucleoside and nucleobase strongly polar compounds well in the HILIC mode, suggesting that hydrophilic groups in PAE-ANT and PAE-PA are involved in the interactions, reflecting their amphiphilic nature. The results show that the ordered gelation of dendritic organic small molecule gelators on the SiO2 surface, along with multiple carbonyl-π, π-π and other interactions, play a crucial role in the separating shape-restricted isomers. The integrated and ordered functional groups serve as the primary driving force behind the exceptionally high molecular shape selectivity of SiO2@PAE-ANT and SiO2@PAE-PA phases. Alterations in the structure of dendritic organic small molecule gelators can impact both molecular orientation and recognition ability, while changes in the type of functional groups influences the separation mechanism of shape-restricted isomers.

Reversed-Phase Medium-Pressure Liquid Chromatography Purification of Omega-3 Fatty Acid Ethyl Esters Using AQ-C18

Omega-3 fatty acids are in high demand due to their efficacy in treating hypertriglyceridemia and preventing cardiovascular diseases. However, the growth of the industry is hampered by low purity and insufficient productivity. This study aims to develop an efficient RP-MPLC purification method for omega-3 fatty acid ethyl esters with high purity and capacity. The results indicate that the AQ-C18 featuring polar end-capped silanol groups outperformed C18 and others in retention time and impurity separation. By injecting pure fish oil esters with a volume equivalent to a 1.25% bed volume on an AQ-C18 MPLC column using a binary isocratic methanol-water (90:10, v:v) mobile phase at 30 mL/min, optimal omega-3 fatty acid ethyl esters were obtained, with the notable purity of 90.34% and a recovery rate of 74.30%. The total content of EPA and DHA produced increased from 67.91% to 85.27%, meeting the acceptance criteria of no less than 84% set by the 2020 edition of the Pharmacopoeia of the People's Republic of China. In contrast, RP-MPLC significantly enhanced the production efficiency per unit output compared to RP-HPLC. This study demonstrates a pioneering approach to producing omega-3 fatty acid ethyl esters with high purity and of greater quantity using AQ-C18 RP-MPLC, showing this method's significant potential for use in industrial-scale manufacturing.

Core-shell silica@pyridyl conjugated microporous polymer as a stationary phase for high performance liquid chromatography

BACKGROUND

Because of the advantages of good selectivity, high sensitivity, and fast analysis, high performance liquid chromatography (HPLC) has become one of the modern analytical techniques in wide application range, such as biological analysis, environmental detection, pharmaceutical and food inspection, agriculture and other fields. The stationary phase greatly decides the chromatographic separation performance, so the development of novel stationary phase is most important for HPLC.

RESULTS

Pyridyl conjugated microporous polymers (P-CMP) with one to four layers were modified on the surface of amino silica to obtain a novel core-shell material (SiO2@P-CMP) by the layer-by-layer assembly strategy and Chichibabin reaction. The relationship between the structure of SiO2@P-CMP and chromatographic performance was carefully investigated, and the retention mechanism was revealed. The interactions including π-π stacking, hydrophobic effect and hydrogen bond gradually enhanced with the increase of P-CMP layers on the silica surface. Compared with C18 column, SiO2@P-CMP columns displayed better separation selectivity for polycyclic aromatic hydrocarbons (PAHs). According to the relative retention values (α), the separation performance of SiO2@P-CMP columns (α = 1.144-1.884) for PAH isomers and other analytes was obviously better than that of C18 column (α = 0.998-1.487). Furthermore, the SiO2@P-CMP column with four layers was selected to separate different types of analytes (eight PAHs, four bisphenols, four estrogens and nine phthalates), and the peak order of analytes was different from that on the C18 column due to the influence of hydrogen-bonding and π-π interactions. The relative standard deviations (n = 10) of retention time and peak area on SiO2@P-CMP column were between 0.28 % and 1.98 %.

SIGNIFICANCE AND NOVELTY

Pyridyl conjugated microporous polymer was introduced as the stationary phase for the first time in HPLC. The proposed column displayed better separation characteristics compared to Zorbax SB-C18 column. It provided a new idea for the separation of small molecules and the development of chromatographic packing or extraction material.

A C4-modified bipyridinium multi-mode stationary phase for reversed phase, hydrophilic interaction and ion exchange chromatography

A novel C4-modified bipyridinium stationary phase (Sil-DPC4) was prepared and characterized by elemental analysis (EA) and Fourier transform infrared spectrometry (FT-IR) and further investigated for multi-mode liquid chromatography. The chromatographic performances of Sil-DPC4 were evaluated by reversed-phase chromatography using polycyclic aromatic hydrocarbons (PAHs), phenylamines and phenols, hydrophilic interaction chromatography using nucleosides and nucleobases, and ion exchange chromatography using inorganic ions and organic ions. The effects of the acetonitrile content, salt concentration and pH value of the mobile phase on the retention of Sil-DPC4 were also investigated. Sil-DPC4 showed multiple retention mechanisms including π-π, hydrophobic and electrostatic interactions for PAHs, phenylamines and phenols compared with a dipyridine modified silica stationary phase (Sil-DP) and C18 in RPLC, faster separation for nucleosides and nucleobases compared with Sil-DP, and higher hydrophilicity than HILIC in HILIC, and stronger retention and better separation ability for inorganic ions and organic ions in comparison to Sil-DP in IEC. Besides, Sil-DPC4 was used successfully to detect iodide in artificial seawater and had the potential to analyze radionuclide iodine-131 in seawater. In conclusion, multiple retention mechanisms of Sil-DPC4 could make it have potential applications in complex samples.

Preparation, characterization, and separation mechanism of a dehydroabietic-acid-based shape-selective chromatographic stationary phase1

Chromatographic stationary phases with molecular-shape selectivity are advantageous for the separation and analysis of geometric isomers. Herein, dehydroabietic acid is bonded on the surface of silica microspheres via 3-glycidoxypropyltrimethoxysilane to form a monolayer dehydroabietic-acid stationary phase (Si-DOMM) with a racket-shaped structure. Various characterization techniques indicate that Si-DOMM is successfully prepared, and the separation performance of a Si-DOMM column is evaluated. The stationary phase has a low silanol activity and metal contamination and a high hydrophobicity and shape selectivity. The resolutions of lycopene, lutein, and capsaicin on the Si-DOMM column confirm that the stationary phase exhibits high shape selectivity. The elution order of n-alkyl benzene on the Si-DOMM column indicates its high hydrophobic selectivity and suggests that the separation is an enthalpy-driven process. Repeatability experiments reveal highly stable preparation processes of the stationary phase and column and indicate that the relative standard deviations of retention time, peak height, and peak area are less than 0.26%, 3.54%, and 3.48%, respectively. Density functional theory calculations using n-alkylbenzenes, polycyclic aromatic hydrocarbons, amines, and phenols as model solutes provide an intuitive and quantitative description of the multiple retention mechanisms. The Si-DOMM stationary phase exhibits superior retention and high selectivity for these compounds via multiple interactions. The bonding phase of the monolayer dehydroabietic acid stationary phase with a racket-shaped structure has a unique affinity for benzene, strong shape selectivity, and good separation performance for geometrical isomers with different molecular shapes.

Particle Size Regulation of Single-Crystalline Covalent Organic Frameworks for High Performance of Gas Chromatography

Although polycrystalline covalent organic frameworks (PCOFs) have already shown great potential as stationary phases for chromatography, irregular shape and size distribution of PCOFs make regulation of particle size of PCOFs for high separation performance impossible, which is accessible by the application of single-crystalline COFs (SCOFs). Herein, we showed preparation of three-dimensional SCOF (SCOF-303) bonded capillaries (SCOF-303-capillary) with different particle sizes (about 0.4-1.6 μm) and further investigated gas chromatographic separation ability of these SCOF-303-capillaries for isomers of xylene, dichlorobenzene, and pinene. It was found resolution and column efficiency of SCOF-303-capillaries for isomers decreased with the increase in particle size, mainly resulting from the weaker size-exclusion effect and higher mass transfer resistance of the larger particle size of flexible SCOF-303. The obtained SCOF-303-capillary (particle size of ∼0.4 μm) offered baseline separation of xylene isomers with the high resolution of 2.26-3.52, great efficiency of 7879 plates m^-1 for p-xylene, better than PCOF-303-capillary, and commercial DB-5 and HP-FFAP capillary columns as well as many reported capillaries. This work not only shows the great potential of SCOFs for gas chromatography but also provides the theoretical direction for the design of the efficient COF based stationary phase by adjusting the particle sizes.

Grafting of Tetraphenylethylene on Silica Surface, Characterizations, and Their Chromatographic Performance as Reversed-Phase Stationary Phases

Surface modification is an effective way to functionalize the materials so as to get some special properties. Tetraphenylethylene (TPE) has been widely investigated as a well-known reagent which has the nature of aggregation-induced emission (AIE), but has never been reported in the liquid chromatography stationary phase. In this work, TPE-grafted silica (Sil-TPE) was obtained successfully using the derivative of 1-(4-hydroxyphenyl)-1,2,2-triphenylethylene as a ligand, and then characterized by elemental analysis, Fourier transform infrared spectra, thermogravimetric analysis, and so forth. Laser scanning confocal microscopy images reflected the AIE phenomenon of grafted TPE because the internal vibration and rotation of TPE molecules were restrained in the confined silica space. The contact angle test showed superhydrophobic properties of Sil-TPE. In order to understand thoroughly the mechanism of chromatographic performance and retention behavior for Sil-TPE, Tanaka test mixture, alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs), and phenols were separated. This reveals that Sil-TPE has strong aromaticity and certain shape selectivity, especially, has excellent separation performance for PAHs and phenols. The thermodynamic properties and repeatability of Sil-TPE were further studied, which showed the stability of Sil-TPE. This work shows that TPE can be successfully grafted on silica surface and it has the potential to be a new kind of promising stationary phases in the future.

Effect of phenyl numbers in polyphenyl ligand on retention properties of aromatic stationary phases

Aromatic phase, as one type of reversed-phase stationary phases, shows complementary selectivity to the n-alkyl counterparts especially for certain challenging separation tasks. However, effect of phenyl numbers in aromatic ligands on retention behaviors has rarely been addressed compared with the alkyl stationary phases. To illustrate the issue, a series of polyphenyl stationary phases were facially prepared via the coupling chemistry of isocyanate with amine, including aniline (π¹), 4-aminobiphenyl (π²), 4-amino-p-terphenyl (π³) and [1,1':4',1'':4'',1'''-quaterphenyl]-4-amine (π⁴), respectively. The chromatographic behaviors of the new stationary phases as well as the traditional C18 were systematically compared in terms of retention mode, hydrophobic and aromatic selectivity, shape selectivity and π-π interaction by various analytes, including alkylbenzenes, polycyclic aromatic hydrocarbons congeners and substituted benzenes with electron-withdrawing groups. Due to the homologous structure of four polyphenyl ligands, the hydrophobic selectivity, aromatic selectivity and shape selectivity of stationary phases increase with phenyl numbers in the bonded polyphenyl ligands, whereas the increment becomes insignificant from U-π³ to U-π⁴. This phenomenon is explained by the insertion degree of analytes in the polyphenyl ligand brushes. Compared with the homemade C18, the polyphenyl phases indicate insignificant changes of shape selectivity with temperature. Notably, the new polyphenyl phases demonstrate the great selective separation towards the electron-deficient compounds through the π-π interaction. These findings make up for the understanding of the retention behavior of aromatic stationary phases.

Progress in surface-modified silicas for Cr(VI) adsorption: A review

Various toxic chemicals are discharging to the environment due to rapid industrialization and polluting soil, water, and air causing numerous diseases including life-threatening cancer. Among these pollutants, Cr(VI) or hexavalent chromium is one of the most carcinogenic and toxic contaminants hostile to human health and other living things. Therefore, along with other contaminants, the removal of Cr(VI) efficiently is very crucial to keep our environment neat and clean. On the other hand, silica has a lot of room to modify its surfaces as it is available with various sizes, shapes, pore sizes, surface areas etc. and the surface silanol groups are susceptible to design and prepare adsorbents for Cr(VI). This review emphases on the progress in the development of different types of silica-based adsorbents by modifying the surfaces of silica and their application for the removal of Cr(VI) from wastewater. Toxicity of Cr(VI), different silica surface modification processes, and removal techniques are also highlighted. The adsorption capacities of the surface-modified silica materials with other parameters are discussed extensively to understand how to select the best condition, silica and modifiers to achieve optimum removal performance. The adsorption mechanisms of various adsorbents are also discussed. Finally, future prospects are summarized and some suggestions are given to enhance the adsorption capacities of the surface-modified silica materials.

Characterization of stationary phases in supercritical fluid chromatography including exploration of shape selectivity

Achiral packed column supercritical fluid chromatography (SFC) has shown an important regain of interest in academic and industrial laboratories in the recent years. In relation to this increased concern, major instrument manufacturers have designed some stationary phases specifically for SFC use. SFC stationary phases have been widely examined over the last two decades, based on the use of linear solvation energy relationships (LSER), which relate analyte retention to its properties and to the interaction capabilities of the chromatographic system. The method provides some understanding on retention mechanisms (normal phase, reversed phase or mixed-mode) and the possibility to compare stationary phases on a rational basis, especially through a spider diagram providing a visual classification. The latter can be used as a primary tool to select complementary stationary phases to be screened for any separation at early stages of method development, before optimization steps. In this context, the characterization of the 14 columns from the Shim-pack UC series (Shimadzu Corporation, Kyoto, Japan), which are dedicated to SFC and more broadly to unified chromatography (UC), was performed, using the LSER methodology. As in previous works, seven descriptors, including five Abraham descriptors (E, S, A, B, V) and two descriptors describing positive and negative charges (D^- and D⁺) were first employed to describe interactions with neutral and charged analytes. Secondly, two more descriptors were introduced, which were previously employed solely for the characterization of enantioselective systems and expressing shape features of the analytes (flexibility F and globularity G). They brought additional insight into the retention mechanisms, showing how spatial insertion of the analytes in some stationary phases is contributing to shape separation capabilities and how folding possibilities in flexible molecules is unfavorable to retention in other stationary phases.

Nanoparticle-based polyacrylonitrile monolithic column for highly efficient micro solid-phase extraction of carotenoids and vitamins in human serum

In this work, a biocompatible monolithic column based micro-solid-phase extraction (µ-SPE) method was developed for biological fluid analysis. A novel nanoparticle-based polyacrylonitrile monolithic column (C30 NP-PMC) was fabricated by incorporating triacontyl (C30) modified silica nanoparticles (NPs) into the polyacrylonitrile monolithic matrix through thermally induced phase separation. With efficient mass transfer and sorption capacity, C30 NP-PMC exhibited outstanding performance for the extraction of carotenoids and fat-soluble vitamins (FSVs) from human serum samples, superior to commercial C18 cartridges as well as liquid-liquid extraction (LLE) method. Under optimal conditions, the proposed µ-SPE method coupled with high-performance liquid chromatography-diode array detection (HPLC-DAD) achieved satisfactory limits of detection (LODs) (1.5-75.0 ng/mL) and good recoveries (85.0-106.5 %) with relative standard deviations (RSDs) of less than 12.1% by consuming lower sorbent (35.0 mg) and organic solvent (0.8 mL). Successful application of the developed method demonstrated the great potential of such monolithic sorbents for efficient isolation and preconcentration of trace analytes from blood samples.

A phenylenediamine-based carbon dot-modified silica stationary phase for hydrophilic interaction chromatography

Red emitting carbon dots derived from p-phenylenediamine were successfully grafted onto the surface of porous silica spheres which served as a new stationary phase for hydrophilic interaction chromatography with enhanced selectivity.

Controlled Fabrication of Silica@Covalent Triazine Polymer Core-Shell Spheres as a Reversed-Phase/Hydrophilic Interaction Mixed-Mode Chromatographic Stationary Phase

The unique properties of covalent triazine-based organic framework/polymers, including large surface area, hydrophilic-lipophilic-balanced adsorption, and economical preparation, make it a promising candidate as a stationary phase for high-performance liquid chromatography. However, irregular shapes and wide size distributions of such particles hinder column packing, resulting in a low column efficiency or a high back pressure. Herein, we describe the fabrication of SiO₂@ covalent triazine-based organic polymer (CTP) core-shell microspheres with a distinct sphere-coating-sphere appearance using aminosilica as the supporting substrate to grow the CTP shell. By adjusting the amount of reactants, the thickness of the CTP shell, which consists of triazine and 1,3,5-triphenylbenzene monomers, was easily controlled. The developed core-shell microspheres were characterized via scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, solid-state ¹³C nuclear magnetic resonance analysis, and N₂ adsorption experiments. The synergism of the triazine and aromatic moieties on CTP provides the new stationary phase with multiple retention mechanisms, including hydrophobic, π-π, electron donor-acceptor, hydrogen-bonding interactions, and so forth. On the basis of these interactions, successful separation and higher shape selectivity were achieved among several analytes that vary in polarity under both reversed-phase and hydrophilic interaction liquid chromatography conditions. Therefore, SiO₂@CTP microspheres combine the advantages of good column packing properties of the uniform monodisperse silica microspheres and the recognition performance of CTP, generating flexible selectivity and application prospect for both hydrophilic and hydrophobic analytes.

Characterization of triacontyl (C-30) liquid chromatographic columns

Differences in the characteristics of seventeen commercial C-30 liquid chromatographic columns were studied for the separation of carotenoid isomers. A mixture consisting of nine xanthophyll and hydrocarbon carotenoids were separated under conditions carefully chosen to reveal changes in selectivity. The influence of the mobile phase composition, column temperature, and mobile phase flow rate were evaluated. Shape selectivity was characterized with Standard Reference Material (SRM) 869b Column Selectivity Test Mixture, for correlation with carotenoid retention behavior. Regular changes were observed across a broad spectrum of shape selectivity characteristics as indicated by SRM 869b. Better separations of carotenoid isomers were achieved with C-30 columns than were possible with C-18 columns, even after optimization of separation conditions.