Cr speciation in foodstuffs, biological and environmental samples: Methodological approaches and analytical challenges – A critical review

Update on chromium speciation analysis in foods: a review of advances in analytical methods and dietary exposure assessment

Chromium occurs naturally in different oxidation states. Amongst them, hexavalent chromium is classified as both genotoxic and carcinogenic while trivalent chromium can be considered as an essential element. Therefore, speciation analysis is essential when conducting dietary exposure assessment. Several critical reviews have been published on chromium speciation analysis in foodstuffs in the last decade. However, a method that can account for species interconversion during the extraction procedure has not been reported in the reviews. In recent years, an online method using species-specific isotope dilution mass spectrometry has been developed for the simultaneous determination of trivalent and hexavalent chromium in foodstuffs. Apart from that, new methods based on offline analytical techniques, to analyse trivalent and hexavalent chromium separately, are still under development. Therefore, one of the objectives of this paper is to review these recently published analytical methods and assess whether they are fit for chromium speciation analysis in foodstuffs. Additionally, an objective is also to assess whether their limits of detection are sufficiently low for dietary exposure assessment with respect to the neoplastic effects of hexavalent chromium. Moreover, possible future research gaps are identified based on the current knowledge and existing literature.

Essential trace element levels in multiple sclerosis: Bridging demographic and clinical gaps, assessing the need for supplementation

BACKGROUND

Multiple sclerosis (MS) is a chronic demyelinating disorder intricately linked to perturbations in trace element levels. While previous studies have explored circulating trace elements in a limited sample, understanding the impact of demographic and clinical variables on the elemental profile within a larger cohort remains elusive.

METHODS

This study aimed to evaluate essential trace elements (Cr, Mn, Co, Cu, Zn, and Se) in the sera of 215 MS patients compared to a meticulously matched control group of 100 individuals with similar gender and age. Our main objective was to identify potential variations in elemental profiles based on demographic and clinical parameters among MS patients, elucidating the prospective relevance of supplementing specific essential trace elements.

RESULTS

Data indicated a significant decrease in serum levels of Mn, Co, Zn, and Se, and an increase in Cr in MS patients compared to controls. These trace elements not only discriminated between MS patients and controls but also exhibited distinctive capabilities among demographic subgroups. Gender, smoking habits, and age strata (20-40 years and 41-60 years) revealed discernible variations in elemental profiles between MS patients and their control counterparts. Se demonstrated the singular ability to stratify cases of extreme MS severity, mild relapsing-remitting MS (RRMS) and highly severe secondary progressive MS (SPMS). In contrast, Co significantly differentiated RRMS from primary progressive MS (PPMS), while Cu significantly differentiated SPMS from PPMS. Additionally, Cu showed a negative correlation with MSSS, while Mn and Zn showed a positive correlation with EDSS.

CONCLUSION

These findings underscore a substantive deficiency in Mn, Co, Zn, and Se in the MS cohort, supporting targeted supplementation with these trace elements. This study provides a comprehensive understanding of the intricate relationship between essential trace elements and MS, paving the way for further research into personalized nutritional interventions for this complex neurological disorder.

Development of a Fast Method Using Inductively Coupled Plasma Mass Spectrometry Coupled with High-Performance Liquid Chromatography and Exploration of the Reduction Mechanism of Cr(VI) in Foods

Hexavalent chromium (Cr(VI)) is known as the most hazardous species of chromium. Speciation analysis of Cr in foods is of a great significance for assessing its influences on human health. In this study, a fast HPLC-ICP-MS method for the determination of Cr(VI) was developed for determining the content of Cr(VI) and also investigating its transformation in foods. The developed method employs an alkali extraction and weak anion-exchange column separation for distinguishing the Cr species, facilitating accurate Cr(VI) quantification within 1.5 min. This technique was applied to determine the Cr(VI) levels in a range of food products, including yoghurt, milk powder, rice flour, orange juice, green tea, white vinegar, and whole wheat bread. The results showed that no Cr(VI) was detected in these food products. Spiking experiments revealed that the recovery rate of Cr(VI) decreased with the increase in its contact time with food products. A further exploration of Cr(VI) in various food components such as vitamin C, tea polyphenols, whey proteins, gelatin, fructose, and cellulose indicated the conversion of Cr(VI) to organic Cr(III) over a period from 20 min to 60 h. It was found that high temperatures and acidic conditions accelerated the rate of Cr(VI) conversion to organic Cr(III) in the six food components mentioned above. This evidence suggests that natural reducing substances in foods probably prevent the occurrence of Cr(VI).

Composting of recovered rock wool from hydroponics for the production of soil amendment

Due to its fibrous structure and high water holding capacity, rock mineral wool (RMW) has boosted the development of hydroponics. Consequently, the amount of waste RMW has also increased tremendously, which has stimulated the research and development of RMW reuse options. In this study, composting and degradability of RMW from hydroponics (gRMW) were tested in combination with different ratios of biowaste compost, including physical and chemical properties of the starting and final materials, and potential ecological hazards of the final product. gRMW had high water holding capacity and low organic matter content, which was easily degradable. Limits of toxic elements according to EU regulation were not exceeded. Degraded gRMW mixtures with compost did not exhibit toxicity to plants or aquatic bacteria and showed intermediate or limited habitat function for earthworms, which preferred the sole gRMW not mixed with compost. Overall, degraded gRMW exhibited parameters of safe soil amendment.

Liquid-Phase Cyclic Chemiluminescence for the Identification of Cobalt Speciation

Accurate discrimination of metal species is a significant analytical challenge. Herein, we propose a novel methodology based on liquid-phase cyclic chemiluminescence (CCL) for the identification of cobalt speciation. The CCL multistage signals (In) of the luminol-H2O2 reaction catalyzed by different cobalt species have different decay coefficients k. Thereby, we can facilely identify various cobalt species according to the distinguishable k values, including the complicated and structurally similar cobalt complexes, such as analogues of [Co(NH3)5X]n+ (X = Cl-, H2O, and NH3), Co(II) porphyrins, and bis(2,4-pentanedione) cobalt(II) derivatives. Especially, the number of substituent atoms also influences the k value greatly, which allows excellent discrimination between complexes that only have a subtle difference in the substituent group. In addition, linear discriminant analysis based on In provides a complementary solution to improve the differentiating ability. We performed density functional theory calculations to investigate the interaction mode of H2O2 over cobalt species. A close negative correlation between the adsorption energy and the k value is observed. Moreover, the calculation of energy evolutions of H2O2 decomposition into a double hydroxide radical shows that a high level of consistency exists between the activation energy barrier and the k value. The results further demonstrate that the decay coefficient of the CCL multistage signal is associated with the catalytic reactivity of the cobalt species. Our work not only broadens the application of chemiluminescence but also provides a complementary technology for speciation analysis.

Beneficial and adverse effects of dam construction in canal tannery wastewater effluent with a high content of chromium in Hazaribagh, Bangladesh

BACKGROUND

Blockage to divide downstream canals into upstream canals, into which tannery wastewater including a high concentration of trivalent chromium [Cr(III)] is directly discharged, has been constructed in Hazaribagh, a tannery built-up area in Bangladesh. However, there has been no study to verify the environmental significance of blockage construction for water pollution of Cr in nature.

METHODS

Consecutive fixed area monitoring for a total of 164 water samples collected outside and inside Hazaribagh from 2014 to 2023 was carried out to clarify the effects of stagnant and flowable canal water in the presence or absence of blockage on Cr(III) and hexavalent Cr [Cr(VI)] concentrations.

RESULTS

Since pollution of Cr(III) and Cr(VI) in Buriganga River (outside Hazaribagh) was not serious, this study then focused on their pollution in canal water (inside Hazaribagh) in the nonblockage period, blockage construction period and blockage destruction period. As expected, the mean Cr(III) concentration in downstream canal water samples in the blockage construction period was more than 98% lower than that in the upstream canal water samples in the same period, while the concentrations were comparable in downstream and upstream canal water samples in the nonblockage period and blockage destruction period. Unexpectedly, the mean concentration of Cr(VI) in the upstream canal water samples in the blockage construction period was 38.6-fold and 3.3-fold higher than that in the downstream canal water samples and the Cr(VI) guideline value by the US-EPA, respectively.

CONCLUSION

This study demonstrated for the first time not only a merit of decreased Cr(III) pollution but also a demerit of increased Cr(VI) pollution in stagnant water derived from blockage construction in natural environments. This bitter lesson obtained by the enclosure of Cr(III)-polluted water is globally applicable for water pollution of Cr(III), which is used in various industries including the leather industry.

Improvement in the Chromium(VI)-Diphenylcarbazide Determination Using Cloud Point Microextraction; Speciation of Chromium at Low Levels in Water Samples

A reliable, rapid, and low-cost procedure for determining very low concentrations of hexavalent chromium (Cr) in water is discussed. The procedure is based in the classical reaction of Cr6+ with diphenylcarbazide. Once this reaction has taken place, sodium dodecylsulfate is added to obtain an ion-pair, and Triton X-114 is incorporated. Next, the heating of the mixture allows two phases that can be separated by centrifugation to be obtained in a cloud point microextraction (CPE) process. The coacervate contains all the Cr6+ originally present in the water sample, so that the measurement by molecular absorption spectrophotometry allows the concentration of the metal to be calculated. No harmful organic solvents are required. The discrimination of hexavalent and trivalent forms is achieved by including an oxidation stage with Ce4+. To take full advantage of the pre-concentration effect inherent to the coacervation process, as well as to minimize reagent consumption and waste generation, a portable mini-spectrophotometer which is compatible with microvolumes of liquid samples is used. The preconcentration factor is 415 and a chromium concentration as low as 0.02 µg L-1 can be detected. The procedure shows a good reproducibility (relative standard deviation close to 3%).

A novel separation and preconcentration methodology based on direct immersion dual-drop microextraction for speciation of inorganic chromium in environmental water samples

In this study, for the first time, a novel separation and preconcentration method of direct immersion dual-drop microextraction (DIDDME) was proposed for the species of inorganic chromium (Cr(III) and Cr(VI)) followed by graphite furnace atomic absorption spectrometry detection. The methodology is based on that two organic drops hold on the needle tips of microsyringes were concurrently immersed in a stirred sample solution. Each drop contains a chelating reagent, which can react with a specific species under the same pH value. Therefore, Cr(III) and Cr(VI) can be selectively extracted into different drops. This procedure did not require tedious and complicated pre-oxidation/pre-reduction and centrifugation/filtration operations, which may lead to the risk of sample contamination and analysis errors. Main parameters influencing separation, preconcentration and identification of the target species were investigated. An enrichment factor of 400-fold was obtained for Cr(III) and Cr(VI). Under the optimized conditions, detection limits for this method were 1.1 ng L^-1 and 1.4 ng L^-1 for Cr(III) and Cr(VI) with relative standard deviations of 5.1 and 6.3%, respectively. This procedure was applied for the separation, preconcentration and determination of Cr(III) and Cr(VI) in environmental water samples and certified reference materials with satisfactory results. Recoveries of spiked experiments ranged from 86.0 to 112%.

Chromium Speciation by HPLC-DAD/ICP-MS: Simultaneous Hyphenation of Analytical Techniques for Studies of Biomolecules

The first element legislated adopting chemical speciation was chromium (Cr) for differentiation between the highly toxic Cr(VI) from the micronutrient Cr(III). Therefore, this work aimed to develop a new analytical method through the coupling of High-Performance Liquid Chromatography with Diode-Array Detection (HPLC-DAD) with inductively coupled plasma mass spectrometry (ICP-MS) to obtain molecular and elemental information simultaneously from a single sample injection. In the first step, a low-cost flow split made of acrylic was developed aiming at optimally directing the sample to the detectors, enabling the HPLC-DAD/ICP-MS coupling. After the extraction of Certified Reference Materials (CRM of natural water NIST1640a and sugar cane leaf agro FC_012017), the recoveries determined by ICP-MS were 99.7% and 85.4%, respectively. Then, the method of HPLC-DAD/ICP-MS was applied for real samples of the CRMs. The presence of possible biomolecules associated with Cr(III) and Cr(VI) species was evaluated, with the simultaneous response detection of molecular (DAD) and elementary (ICP-MS) detectors. Potential biomolecules were observed during the monitoring of Cr(VI) and Cr(III) in sugar cane leaves, water samples and a supplement of Cr picolinate. Finally, the article also discusses the potential of the technique applied to biomolecules containing other associated elements and the need of more bioanalytical methods to understand the presence of trace elements in biomolecules.

Detailed insight into chromium species released from failed CoCrMo implants: Ex vivo periprosthetic tissues study

This unique study provides information on Cr species and their distribution in periprosthetic tissues of patients with metal-on-polyethylene joint implants. Co-Cr-Mo alloy has been widely used in joint replacement and represents a source of metal derived species. In the case of chromium, previous studies on periprosthetic tissues revealed mainly Cr(III) distribution, whereas the potential release of carcinogenic Cr(VI) species has been still a subject of debate. Here, an analytical approach utilizing speciation and fractionation was developed to analyze periprosthetic tissue samples collected from wide range of patients with failed total hip or knee replacements. The results reveal that Cr(III) is mainly released in the form of insoluble CrPO₄ and Cr₂ O₃ particles. The highest Cr contents were found in periprosthetic tissues of patients suffering from aseptic loosening and having more Cr-based implants in the body. Cr species penetrated tissue layers, but their levels decreased with the distance from an implant. The detailed speciation/fractionation study carried out using the set of consecutive periprosthetic tissues of a patient with extensive metallosis showed the presence of trace amounts of free Cr(III), nanoparticles, and metal-protein complexes, but the majority of Cr still occurred in CrPO₄ form. Carcinogenic Cr(VI) species were not detected. Up to date, there is no published human tissue study focused on the detailed speciation of both soluble and insoluble Cr-based species in the context of failing total hip and knee replacements.

Reduction of hexavalent chromium using bacterial isolates and a microbial community enriched from tannery effluent

We investigated microbial growth in increasing concentrations of hexavalent chromium (Cr(VI)) and its reduction by a microbial community enriched from tannery effluent and by the bacterial strains isolated from the enriched community. The bacterial growth was monitored by measuring the optical cell density (OD₆₅₀), while the Cr(VI) concentration in the samples was determined using spectrophotometry and liquid chromatography hyphenated to inductively coupled plasma mass spectrometry (HPLC-ICP-MS). At a Cr(VI) concentration of 100 mg/L, the isolates affiliated with Pseudomonas aeruginosa (P. aeruginosa) reached higher optical cell densities, but were in general less effective for Cr(VI) reduction than the isolates affiliated with Mammaliicoccus sciuri (M. sciuri). All three M. sciuri isolates and only one of the seven P. aeruginosa isolates were able to reduce 50% of the Cr(VI) with an initial concentration of 100 mg/L within 24 h (pH 7.1), while the six isolates affiliated with P. aeruginosa were less effective. Compared to the isolated, individual bacterial strains, the enriched microbial community was better adapted to the elevated Cr(VI) concentrations, but needed a longer time (48 h) to reduce the Cr(VI) with the same efficacy as the most efficient individual isolates. The ability of the enriched microbial community and the isolated bacterial strains to reduce the Cr(VI) highlights their potential for use in the rapid bioremediation of wastewaters contaminated with Cr(VI).

[Magnetic ion imprinting techniques for the separation and analysis of elemental speciation]

Metal and metalloid elements have various possible isotopic compositions and oxidation states and often form coordination or covalent compounds with inorganic and organic small molecules or biological macromolecules, resulting in complex elemental speciation. Different species of the same element often have different properties, which dictate their behavior. Thus, elemental speciation analysis is vital for comprehensively and accurately assessing an element's environmental and biological effects and the corresponding risks. Because elemental speciation determines the behavior of an element in different environmental and biological processes, the analysis of elemental species has, in recent years, been important in various subjects, including analytical chemistry, environmental chemistry, geochemistry, ecology, agronomy, and biomedicine. The complexity of environmental and biological sample matrices, as well as the multiformity, low levels, and lability of chemical forms pose severe challenges in elemental speciation analysis. Therefore, the highly selective identification and efficient separation of native species is necessary for conducting the identification, quantification, ecotoxicity evaluation, and physiological function study of elemental speciation. Sample pretreatment by solid-phase extraction is an effective solution to the aforementioned problems, but the existing methods do not meet the requirements of current research. The transition of the target species from pre-processing to the detection device includes both on- and off-line arrangements. Compared with the on-line approach, the off-line approach requires more manual participation, increasing the analysis workload. However, the off-line approach can improve the analysis efficiency through high-throughput pretreatment when large batches of samples are encountered, meaning the off-line approach is still an effective model. Ion imprinting technology has been developed based on existing molecular imprinting technology, with four main steps present in the synthesis of ion imprinted polymers. First, ion imprinting technology uses metal ions as templates. Then, these templates are combined with the functional monomers through coordination, electrostatic or hydrogen bonding. The functional monomers simultaneously surround and fix the templates, after which the cross-linkers and functional monomers polymerize to prepare ion-imprinted polymers with a specific structure and composition. Finally, the imprinted holes are created in the polymers by eluting the template ions. Therefore, the template molecules, functional monomers, and cross-linkers are three precursors necessary for synthesizing ion-imprinted polymers. These polymers can specifically bind to the imprinted metal ions with accuracy, sensitivity, and reliability. In recent years, they have been widely used in separating, enriching, analyzing, and detecting elemental species. During solid-phase extraction, the non-magnetic adsorbent materials dispersed in the sample solution need to be separated by centrifugation or filtration, which is time-consuming and laborious. Because an external magnetic field can be used for rapid magnetic solid-phase extraction, it has become a potential method for separating and enriching elemental species. This review systematically summarizes the latest progress in ion-imprinting technology, including its principle and the preparation methods of ion-imprinted polymers. The challenges faced by ion imprinting technology are analyzed in the context of the development of ion-imprinting magnetic solid-phase extraction in elemental speciation analysis. Finally, the direction of future development and the strategies of ion imprinting technology in elemental speciation analysis are proposed. It is important to exploit novel organic-inorganic hybrid polymerization-based multifunctional ion-imprinted magnetic nanocomposites for the magnetic solid-phase extraction and separation of elemental species. By establishing the pretreatment protocols with high recognition selectivity, strong separation ability, large adsorption capacity, and good speciation stability, we expect to achieve the research objectives of simultaneously separating and enriching the multiple-species of typical metal/metalloid elements in environmental and biological samples.

Speciation and Bio-Imaging of Chromium in Taraxacum officinale Using HPLC Post-column ID-ICP-MS, High Resolution MS and Laser Ablation ICP-MS Techniques

A new analytical procedure for the speciation of chromium (Cr) in plants by high performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC-ICP-MS) was developed using a strong anion-exchange Mono Q column for the separation of the Cr species. To optimize the analytical procedure, Cr complexes were first synthesized from Cr-nitrate with the addition of an excess of ligand (90°C). Cr-oxalate, Cr-malate, Cr-citrate, Cr-aconitate and Cr-quinate complexes and Cr-nitrate (pH 6.5) were chromatographically separated from Cr(VI) by applying linear gradient elution from 100% water to 100% NH4Cl at a flow rate of 1.5 ml min−1 in 10 min. The column recoveries ranged from 100 to 104%. The exception was Cr-aconitate (column recovery 33%), where a quantitative synthesis was not possible. Good repeatability of the measurements (relative standard deviations better than ± 3%) and low limits of detection (below 0.37 ng ml−1 Cr) were achieved for the individual Cr species. The developed analytical procedure was applied to Cr speciation for dandelions (Taraxacum officinale) grown in soil with a high Cr content and a study of the uptake and metabolism of Cr species in dandelions grown in soil with a low Cr content treated with solutions of Cr(VI) or Cr-nitrate (5000 ng ml−1 Cr, pH 6.5) for 48 h. The separated Cr species were quantified by post-column isotope dilution ICP-MS, while the identification was based on retention times and was also supported by mass spectra obtained with high resolution mass spectrometry (HR-MS). The data indicate that for dandelions grown in Cr-rich soil and that treated with Cr-nitrate (pH 6.5), the Cr was mainly accumulated in the roots, while in plants treated with Cr(VI) (pH 6.5), the Cr was evenly distributed between the roots and the leaves. The Cr species found in dandelion roots and leaves were Cr-aconitate, Cr-malate, and Cr-quinate. The results revealed that Cr(VI) was completely reduced and metabolized to Cr(III) complexes. LA-ICP-MS data showed that the Cr in a leaf of dandelion grown in Cr-rich soil was localized mainly at the apex of the leaf.

Interlaboratory Comparison Investigations (ICIs) for human biomonitoring of chromium as part of the quality assurance programme under HBM4EU

BACKGROUND

The pan-European human biomonitoring initiative HBM4EU targets the harmonization of human biomonitoring (HBM) procedures and data for both environmental and occupational exposure, including chromium. The determination of chromium in urine (U-Cr), plasma (P-Cr) and whole blood (WB-Cr) is a common HBM application in employees occupationally exposed to chromium (VI) compounds.

METHODS

European laboratories which have registered as candidate laboratories for chromium analysis within HBM4EU were invited to participate in a quality assurance/qualitycontrol (QA/QC) programme comprising interlaboratory comparison investigations (ICI) for the parameters U-Cr, P-Cr and WB-Cr. Participating laboratories received two samples of different concentrations in each of four rounds and were asked to analyse the samples using their standard analytical procedure. The data were evaluated by the Z-score approach and were reported to the participants after each round.

RESULTS

The majority of the 29 participating laboratories obtained satisfactory results, although low limits of quantification were required to quantify chromium concentrations in some of the ICI materials. The robust relative standard deviation of the participants' results (study RSD_R) obtained from all ICI runs ranged from 6 to 16 % for U-Cr, 7-18 % for P-Cr and 4-47 % for WB-Cr. The application of both inductively coupled plasma mass spectrometry (ICP-MS) and electrothermal atomic absorption spectrometry (EAAS) appeared appropriate for the determination of chromium in urine, plasma and whole blood with regard to occupational exposure levels.

CONCLUSION

This QA/QC programme succeeded in establishing a network of laboratories with high analytical comparability and accuracy for the analysis of chromium across Europe.

LC/ICP-MS AND COMPLEMENTARY TECHNIQUES IN BESPOKE AND NONTARGETED SPECIATION ANALYSIS OF ELEMENTS IN FOOD SAMPLES

Chemical elements speciation analysis of food samples has been among the most important scientific topics over the last decades. Food samples are comprised of high variety of chemical compounds, from which many can interact with metals and metalloids, forming complex elemental species with various influence on the human body. It is particularly important not only to determine the amount of certain chemical element in food sample but also to identify the form in which given element occurs in given sample. Employment of bespoke and nontargeted speciation methods, with the use of liquid chromatography inductively coupled plasma mass spectrometry (LC/ICP-MS) and complementary techniques, provides more complete picture on the metals and metalloids speciation in food. This review discusses issues concerning speciation analysis of metals and metalloids in food samples with the use of LC/ICP-MS as a leading technique in elemental speciation nowadays and a complimentary technique intended for their identification. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

Elemental Speciation Analysis in Environmental Studies: Latest Trends and Ecological Impact

Speciation analysis is a key aspect of modern analytical chemistry, as the toxicity, environmental mobility, and bioavailability of elemental analytes are known to depend strongly on an element’s chemical species. Henceforth, great efforts have been made in recent years to develop methods that allow not only the determination of elements as a whole, but also each of its separate species. Environmental analytical chemistry has not ignored this trend, and this review aims to summarize the latest methods and techniques developed with this purpose. From the perspective of each relevant element and highlighting the importance of their speciation analysis, different sample treatment methods are introduced and described, with the spotlight on the use of modern nanomaterials and novel solvents in solid phase and liquid-liquid microextractions. In addition, an in-depth discussion of instrumental techniques aimed both at the separation and quantification of metal and metalloid species is presented, ranging from chromatographic separations to electro-chemical speciation analysis. Special emphasis is made throughout this work on the greenness of these developments, considering their alignment with the precepts of the Green Chemistry concept and critically reviewing their environmental impact.

Ultra-trace speciation analysis of Cr(III) and Cr(VI) in rice using species-specific isotope dilution and HPLC-ICP-MS

The study aims to clarify the current controversy related to conflicting reports on whether presence of Cr(VI) in rice is possible or not. For this purpose, a method was employed for the single run speciation analysis of Cr(III) and Cr(VI) in rice samples using species-specific isotope dilution (SS-ID) and high performance liquid chromatography coupled to inductively coupled mass-spectrometry (HPLC-ICP-MS) and selective single run species complexation/derivatisation. The quantification limits (LOQs) were 0.014 μg kg^-1 for Cr(III) and 0.047 μg kg^-1 for Cr(VI), while the detection limits (LODs) were 0.004 and 0.014 μg kg^-1 for Cr(III) and Cr(VI), respectively. A total of 10 rice samples of different origin and colour (depending on the type of industrial processing) were analysed in this study. The content of Cr(VI) was below the limit of quantification in all of the rice samples analysed, while the Cr(III) levels ranged between 0.59 (whole grain rice) up to 104 µg kg^-1 (brown rice). All samples were also analysed for their total Cr (Cr_total) content by ICP-MS solely and the results were in all cases comparable with the Cr(III) levels determined in the same samples. To assess the stability of Cr(III) and Cr(VI) in rice, one sample was spiked with Cr(III) and Cr(VI) (individually) at different levels (5.0, 10, 15 and 20 μg kg^-1), held for 2 h, and then analysed by SS-ID HPLC-ICP-MS. The results showed a complete reduction of Cr(VI) to Cr(III), while Cr(III) remained stable at all spiking levels. These findings support the general statement from the European Food Safety Authority related to the complete absence of Cr(VI) in foods and confirms that Cr in rice is found solely as Cr(III) species.

An Analysis for Adulteration and Contamination of Over-the-Counter Weight-Loss Products

Six Australian and five overseas complementary medicines (CM) and meal replacement shake products were analysed for potential adulteration with two common active pharmaceutical ingredients, caffeine and sibutramine, using thin-layer chromatography and mass spectrometry. The declared amount of caffeine in each product was also reviewed. Finally, the products were examined for heavy metal contamination using inductively coupled plasma-mass spectrometry. The results showed that there was no detected adulteration of either caffeine (for those products that did not list caffeine as an ingredient) or sibutramine in the 11 products; however, based on the product labels, one Australian and one overseas (two in total) CM product contained more than the maximum daily safety limit (400 mg) of caffeine. Potentially excessive lead and/or chromium was detected in six products, including four Australian products and two products purchased online. One Australian CM product appeared to contain these heavy metals at concentrations at, or exceeding, the safety limits specified in the United States Pharmacopeia or set by the World Health Organization. The overconsumption of caffeine and heavy metals has the potential of causing significant health effects in consumers.

The Double Face of Metals: The Intriguing Case of Chromium

Chromium (Cr) is a common element in the Earth’s crust. It may exist in different oxidation states, Cr(0), Cr(III) and Cr(VI), with Cr(III) and Cr(VI) being relatively stable and largely predominant. Chromium’s peculiarity is that its behavior relies on its valence state. Cr(III) is a trace element in humans and plays a major role in glucose and fat metabolism. The beneficial effects of Cr(III) in obesity and types 2 diabetes are known. It has been long considered an essential element, but now it has been reclassified as a nutritional supplement. On the other hand, Cr(VI) is a human carcinogen and exposure to it occurs both in occupational and environmental contexts. It induces also epigenetic effects on DNA, histone tails and microRNA; its toxicity seems to be related to its higher mobility in soil and swifter penetration through cell membranes than Cr(III). The microorganisms Acinetobacter sp. Cr1 and Pseudomonas sp. Cr13 have been suggested as a promising agent for bioremediation of Cr(VI). This review intends to underline the important role of Cr(III) for human health and the dangerousness of Cr(VI) as a toxic element. The dual and opposing roles of this metal make it particularly interesting. An overview of the recent literature is reported in support.

A Stable 2D Zr(IV)-Based Metal-Organic Framework (USTS-7) for Selective Sensing of Cr2O72- in Aqueous Solution

A novel 2D porous Zr(IV)-based metal-organic framework (USTS-7) was assembled from 2,5-bis[2-(methylthio)ethylthio]terephthalic acid and ZrCl₄. USTS-7 retains its stability in water, strong acid, and base; moreover, it is highly luminescent and displays a remarkable selective sensing property toward Cr₂O₇^2- in aqueous solution with a very low detection limit.

Recent Advances in Electrochemical Monitoring of Chromium

The extensive use of chromium by several industries conducts to the discharge of an immense quantity of its various forms in the environment which affects drastically the ecological and biological lives especially in the case of hexavalent chromium. Electrochemical sensors and biosensors are useful devices for chromium determination. In the last five years, several sensors based on the modification of electrode surface by different nanomaterials (fluorine tin oxide, titanium dioxide, carbon nanomaterials, metallic nanoparticles and nanocomposite) and biosensors with different biorecognition elements (microbial fuel cell, bacteria, enzyme, DNA) were employed for chromium monitoring. Herein, recent advances related to the use of electrochemical approaches for measurement of trivalent and hexavalent chromium from 2015 to 2020 are reported. A discussion of both chromium species detections and speciation studies is provided.