Opportunities and challenges of liquid chromatography coupled to supercritical fluid chromatography

Structural elucidation of complex polyesters polyols from bio-lubricant using off-line liquid chromatography x supercritical fluid chromatography coupled with Orbitrap mass spectrometry

Synthetic complex esters and polyol esters are incorporated as partially bio-based and biodegradable alternatives to petroleum base oils in lubricant formulations, to provide specific properties or performance and to help reducing their carbon footprint in certain cases. A sample can contain over 400 molecules of high chemical similarity including numerous isomers. To resolve such complexity, a separation technique with large peak capacity coupled to high-resolution mass spectrometry (HRMS) is essential. In this study, comprehensive off-line LCxSFC hyphenated with an Orbitrap analyzer was used for the structural elucidation of a synthetic bio-lubricant composed of a polyol reacted with fatty acids of varying length or with repetitive units of polyesters of ricinoleic acid. Retention in the LC first dimension was mostly due to the degree of oligomerization of ricinoleic acid within the polyester and to the chain length of the fatty acid. The SFC second dimension highlighted the esterification degree of the polyalcohol and the number and positions of fatty acids double bonds. The combination of both dimensions permitted the separation of isomers. The coupling of SFC with Orbitrap analyzer allowed an accurate assignment of molecular formulas. Finally, the fragmentation in the ionization source confirmed the attributed structures. By introducing a clear distribution of the chemical structures in the retention space, LCxSFC-HRMS provided a powerful analytical method for the comprehensive molecular characterization of the complex polyester polyols sample.

Development of a Two-Dimensional Supercritical Fluid Chromatography System in Multiple Heart-Cutting Modes

In this study, we present the development of a loop-based two-dimensional supercritical fluid system in multiple heart-cutting modes (mSFC-SFC), with diode-array and mass spectrometric detection. The instrument design was developed to be as simple as possible, based on a single SFC instrument, with the sole addition of three external 2-port 6-position valves. The objective was to achieve the most complete transfer of a peak from the first to the second dimension, whatever the composition of the mobile phase, i.e., whatever the proportion of carbon dioxide and methanol cosolvent along a wide gradient elution. Thanks to fine adjustment of the valve switching times, the first-dimension peaks were parked in 50 μL or 100 μL loops and later discharged to the second dimension. The interest of this instrument was then demonstrated with a sample application on a natural product: an extract of Citrus aurantium L. bark was analyzed, with a particular focus on chiral flavonoids, neohesperidin, and naringin. In this system, the first dimension was an achiral separation of the flavonoids, based on a polar diethylamine-bonded silica stationary phase (ACQUITY Torus DEA), while the second dimension used a stereoselective polysaccharide stationary phase (CHIRALPAK IB-3) to resolve flavonoid diastereomers. Excellent repeatability was demonstrated, with relative standard deviation values on retention times and peak areas all below 2%, together with excellent peak capacity and peak shapes (no distortion observed), making it possible to quantify diastereomers in the second-dimension separation. This good repeatability was also shown for the transfer rate between the two dimensions, which reached a value of 83%. Finally, transferring a compressible sample from the first to the second dimension is demonstrated to yield excellent performance, despite the large loop volume.

A powerful two-dimensional chromatography method for the non-target analysis of depolymerised lignin

BACKGROUND

Lignin is an abundant natural polymer obtained as a by-product from the fractionation of lignocellulosic biomass. In the name of a circular economy, lignin should be valorised into valuable chemicals or biomaterials and utilised instead of petrochemicals. For the development of efficient valorisation processes, the structural characterisation of lignin can be highly beneficial. However, this is an arduous task, as the isolated (and sometimes processed) lignin mainly consists of various neutral monomers but also oligomers. In addition, the material contains isomers, which can be especially problematic to separate and identify.

RESULTS

We present a powerful off-line comprehensive two-dimensional (2D) chromatography method combining liquid chromatography (LC), supercritical fluid chromatography (SFC), and high-resolution mass spectrometry for the non-target analysis of depolymerised lignin. The implementation of a 1-aminoanthracene column in the second dimension enabled a class separation of potential lignin monomers, dimers, trimers, and tetramers with an additional separation based on the number of hydroxyl groups and steric effects. The pentafluorophenyl column in the first dimension additionally improved the separation based on hydrophobicity. The comparison of off-line 2D LC × SFC to 1D SFC showed that besides the overall improved performance, the first method is also superior for the separation of isomers. Advanced data analysis methods (MS-DIAL, SIRIUS, and Feature-Based Molecular Network) were integrated into the non-target workflow to rapidly visualise and study the detected compounds, which proved to be especially beneficial for the characterisation of the separated isomers.

SIGNIFICANCE

The method yielded the first 2D LC plot demonstrating a classification of lignin compounds, which can be applied to compare various lignin sources and processing methods. In addition, the technique demonstrated improved separation of compounds, including isomers, which was especially beneficial as 77 % of the detected compounds had at least one isomer in the same lignin sample.

A multiple signal amplification photoelectrochemical biosensor based on biotin-avidin system for kanamycin sensing in fish and milk via synergism of g-C3N4 and Ru@SiO2

BACKGROUND

The residues of kanamycin can accumulate in the human body for a long time and pose serious health risks, including hearing loss, kidney poisoning, and drug allergic reactions. Therefore, it is crucial to develop a rapid, highly sensitive, and low-cost method for detecting kanamycin residues in foods. However, the current methods have limitations such as low sensitivity, expensive instruments, and multiple steps, which make them impractical for use in resource-limited environments and emergencies. In this study, the creation of a multiple-signal amplification photoelectrochemical biosensor to address these aforementioned issues is discussed.

RESULTS

Herein, we proposed a multiple signal amplification photoelectrochemical (PEC) biosensor based on carboxylated g-C3N4 and avidin functionalized Ru@SiO2 for the ultrasensitive detection of kanamycin. The carboxylated g-C3N4 was a highly efficient photoactive substance for amplifying photoelectric signals and a substrate for aptamer immobilization. The DOS and PDOS of g-C3N4 were studied by simulation, and the sensing mechanism of the probe at the molecular level was revealed. Meanwhile, using Ru@SiO2 as a signal amplifying unit, through the cooperative work between Ru@SiO2 and g-C3N4, the photoelectric signal could be double amplified to produce an excellent photocurrent response. Under optimized conditions, the photocurrent response of the PEC biosensor to kanamycin was obtained at concentrations from 0.1 nM to 1000 nM with a lower detection limit of 4.1052 × 10-11 mol L-1. This protocol demonstrates high sensitivity, brilliant specific recognition ability, excellent reproducibility, and acceptable stability.

SIGNIFICANCE

The first combination of g-C3N4 and avidin-Ru@SiO2 as photocurrent materials greatly enhanced the sensitivity of the PEC biosensors. Moreover, the specificity and sensitivity of the PEC biosensor were further improved through the specific interaction between kanamycin and aptamer. The photoelectric conversion mechanism based on g-C3N4 and two pathways for enhancing the photocurrent by Ru(byp)32+ were proposed. Through simulations of the DOS and PDOS of g-C3N4, the sensing mechanism of the probe at the molecular level was revealed. Under the optimum conditions, the PEC biosensor exhibited a wide linear concentration range and a low detection limit.

Two-dimensional chromatography for the analysis of valorisable biowaste: A review

Various everyday areas such as agriculture, wood industry, and wastewater treatment yield residual biowastes in large amounts that can be utilised for the purpose of sustainability and circular economy. Depending on the type of biowaste, they can be used to extract valuable chemicals or converted into alternative fuels. However, for efficient valorisation, these processes need to be monitored, for which thorough chemical characterisation can be highly beneficial. For this aim, two-dimensional (2D) chromatography can be favourable, as it has a higher peak capacity and sensitivity than one-dimensional (1D) chromatography. Therefore, here we review the studies published since 2010 involving gas chromatography (GC) or liquid chromatography (LC) as one of the dimensions. For the first time, we present the 2D chromatographic characterisation of various biowastes valorised for different purposes (chemical, fuels), together with future prospects and challenges. The aspects related to the 2D chromatographic analysis of polar, poorly volatile, and thermally unstable compounds are highlighted. In addition, it is demonstrated how different 2D setups can be applied for monitoring the biowaste conversion processes.

Controlling the elution order of insulin and its analogs in sub-/supercritical fluid chromatography using methanesulfonic acid and 18-crown-6 as mobile phase additives

The purity analysis of therapeutic peptides can often be challenging, demanding the application of more than a single analytical technique. Supercritical fluid chromatography nowadays is a promising alternative to reversed-phase liquid chromatography, providing orthogonal and complementary information. This study investigated its applicability for the separation of human insulin, its analogs and degradation products. A previously published method development protocol for peptides up to 2000 Da was successfully applied to the higher molecular weight insulins (6 kDa). A single gradient method was optimized for all insulins using a Torus DEA column (100 × 3.0 mm, 1.7 μm), carbon dioxide and a modifier consisting of methanol/acetonitrile/water/methanesulfonic acid (65:35:2:0.1, v/v/v/v). Consecutively, the crown ether 18-crown-6, which is well known to complex charged lysine sidechains and other amino functionalities, was added to the modifier to evaluate its impact on selectivity. A decreased retention and a shift in the elution order for the insulins were observed. An inverse effect on retention was found when combined with a neutral stationary phase chemistry (Viridis BEH).

Two-dimensional reversed phase-normal phase liquid chromatography for simultaneous achiral-chiral analysis to support high-throughput experimentation

Typical chromatographic analysis of chiral compounds requires the use of achiral methods to evaluate impurities or related substances along with separate methods to evaluate chiral purity. The use of two-dimensional liquid chromatography (2D-LC) to support simultaneous achiral-chiral analysis has become increasingly advantageous in the field of high-throughput experimentation where low reaction yields or side reactions can lead to challenging direct chiral analysis. Advancements in multi-dimensional chromatography have led to the development of robust 2D-LC instrumentation with reversed phase solvent systems (RPLC-RPLC) enabling this simultaneous analysis, eliminating the need to purify crude reaction mixtures to determine stereoselectivity. However, when chiral RPLC cannot separate a chiral impurity from the desired product, there are few viable commercial options. The coupling of NPLC to RPLC (RPLC-NPLC) continues to remain elusive due to solvent immiscibility between the two solvent systems. This solvent incompatibility leads to lack of retention, band broadening, poor resolution, poor peak shapes, and baseline issues in the second dimension. A study was conducted to understand the effect of various water-containing injections on NPLC and applied to the development of robust RPLC-NPLC methods. Following thoughtful consideration and modifications to the design of a 2D-LC system in regards to mobile phase selection, sample loop sizing, targeted mixing, and solvent compatibility, proof of concept has been demonstrated with the development of reproducible RPLC-NPLC 2D-LC methods to perform simultaneous achiral-chiral analysis. Second dimension NPLC method performance proved comparable to corresponding 1D-NPLC methods with excellent percent difference in enantiomeric excess results ≤ 1.09% and adequate limits of quantitation down to 0.0025 mg/mL for injection volumes of 2 µL, or 5 ng on-column.

Growth of AgI semiconductors on tailored 3D porous Ti3C2 MXene/graphene oxide aerogel to develop sensitive and selective "signal-on" photoelectrochemical sensor for H2S determination

Long term exposure to hydrogen sulfide (H₂S) even in low concentration poses a serious threat to human health and the ecosystem, pointing to the significance for its effective supervision. In this study, we report a sensitive and selective "signal-on" photoelectrochemical (PEC) sensor for the determination of toxic H₂S in aqueous solution by in situ growth of AgI semiconductors on tailored three-dimensional (3D) porous Ti₃C₂ MXene/graphene oxide aerogel (MGA). Our research demonstrated that the resultant MGA with the starting feeding mass ratio of MXene and graphene oxide (GO) of 1:8 (MGA_1:8) possessed the most excellent PEC performance after the growth of AgI semiconductors than their monomers (Ti₃C₂ MXene and GO) and the MGAs with other starting feeding mass ratio. Such designed PEC sensor based on MGA_1:8/AgI heterojunction showed dramatically strengthened PEC responses with increasing concentrations of S^2-. Correspondingly, a wide linear range of 5 nM-200 μM, a low limit of detection of 1.54 nM (S/N = 3), and exclusively unique selectivity have been achieved. Our research illustrates that the PEC sensor designed with tailored MGA constitutes is an effective pathway to enhance the overall sensing performance, which will envision to boost more efforts for advanced 3D porous aerogel using in PEC sensors.

Off-line two-dimensional separation involving supercritical fluid chromatography for the characterization of the wastewater from algae hydrothermal liquefaction

An off-line multidimensional method involving liquid chromatography combined with supercritical fluid chromatography was developed for the characterization of the wastewater of hydrothermal liquefaction of microalgae Chlorella sorokiniana. The first dimension consisted of a phenyl hexyl column operated in reversed-phase mode, whereas the second dimension was performed on a diol stationary phase. Optimization of the kinetic parameters of the first and second dimensions were performed, taking into account the fraction collection system. The beneficial effect of working at high flow rate in both dimensions, as well as the need to work with short columns (50 mm) in the second dimension was evidenced. Injection volume was also optimized in both dimensions. The first dimension benefited from on-column focusing, while in the second dimension, untreated water-rich fractions could be injected without peak deformation. The performances of offline LCxSFC were compared to LC-HRMS, SFC-HRMS and LCxLC-HRMS for the analysis of the wastewater. Despite a long analysis time of 3.3h, the off-line separation coupled to high-resolution mass spectrometry exhibited a very large orthogonality with 75 % occupation rate of the separation space, reaching an effective peak capacity of 1050. While other evaluated techniques were faster, one-dimensional techniques failed to separate the numerous isomers while LCxLC exhibited lower orthogonality (45% occupation rate).

Progress and prediction of multicomponent quantification in complex systems with practical LC-UV methods

Complex systems exist widely, including medicines from natural products, functional foods, and biological samples. The biological activity of complex systems is often the result of the synergistic effect of multiple components. In the quality evaluation of complex samples, multicomponent quantitative analysis (MCQA) is usually needed. To overcome the difficulty in obtaining standard products, scholars have proposed achieving MCQA through the "single standard to determine multiple components (SSDMC)" approach. This method has been used in the determination of multicomponent content in natural source drugs and the analysis of impurities in chemical drugs and has been included in the Chinese Pharmacopoeia. Depending on a convenient (ultra) high-performance liquid chromatography method, how can the repeatability and robustness of the MCQA method be improved? How can the chromatography conditions be optimized to improve the number of quantitative components? How can computer software technology be introduced to improve the efficiency of multicomponent analysis (MCA)? These are the key problems that remain to be solved in practical MCQA. First, this review article summarizes the calculation methods of relative correction factors in the SSDMC approach in the past five years, as well as the method robustness and accuracy evaluation. Second, it also summarizes methods to improve peak capacity and quantitative accuracy in MCA, including column selection and two-dimensional chromatographic analysis technology. Finally, computer software technologies for predicting chromatographic conditions and analytical parameters are introduced, which provides an idea for intelligent method development in MCA. This paper aims to provide methodological ideas for the improvement of complex system analysis, especially MCQA.

First proof-of-concept of UC/HILIC for extending the versatility of the current art of supercritical fluid separation

Supercritical Fluid Chromatography (SFC), a high-throughput separation technique, has been widely applied as a promising routine method in pharmaceutical, pesticides, and metabolome analysis in the same way as conventional liquid chromatography and gas chromatography. Unified chromatography (UC), an advanced version of SFC, which applied gradient elution with mobile phase changing continuously from supercritical to subcritical and to liquid states, can further extend the SFC applications. UC mostly applying the popular mobile phase of 95%:5%/Methanol:Water with additives allows to analyze many hydrophilic compounds. However, many of phosphorylated metabolites or multi carboxylic acids show very poor peak shapes or even can't be eluted under UC conditions, thus hampering the UC's metabolome coverage. In this study, we proposed the first proof-of-concept of UC/HILIC, a novel strategy to extend the current UC metabolome coverage by employing an aqueous gradient right after the UC gradient on a single packed column in a single measurement. The proposed method showed significant improvement regarding the chromatographic performance and metabolome coverage, while still maintaining the precision and high throughput in comparison with conventional UC methods.

Two-dimensional chromatography in screening of bioactive components from natural products

INTRODUCTION

Screening and analysis of bioactive components from natural products is a fundamental part of new drug development and innovation. Two-dimensional (2D) chromatography has been demonstrated to be an effective method for screening and preparation of specific bioactive components from complex natural products.

OBJECTIVE

To collect details of application of 2D chromatography in screening of natural product bioactive components and to outline the research progress of different separation mechanisms and strategies.

METHODOLOGY

Three screening strategies based on 2D chromatography are reviewed, including traditional separation-based screening, bioactivity-guided screening and affinity chromatography-based screening. Meanwhile, in order to cover these aspects, selections of different separation mechanisms and modes are also presented.

RESULTS

Compared with traditional one-dimensional (1D) chromatography, 2D chromatography has unique advantages in terms of peak capacity and resolution, and it is more effective for screening and identifying bioactive components of complex natural products.

CONCLUSION

Screening of natural bioactive components using 2D chromatography helps separation and analysis of complex samples with greater targeting and relevance, which is very important for development of innovative drug leads.

Application of peptide biomarkers in life analysis based on liquid chromatography-mass spectrometry technology

Biomedicine is developing rapidly in the 21st century. Among them, the qualitative and quantitative analysis of peptide biomarkers is of considerable importance for the diagnosis and therapy of diseases and the quality evaluation of drugs and food. The identification and quantitative analysis of peptides have been going on for decades. Traditionally, immunoassays or biological assays are generally used to quantify peptides in biological matrices. However, the selectivity and sensitivity of these methods cannot meet the requirements of the application. The separation and analysis technique of liquid chromatography-mass spectrometry (LC-MS) supplies a reliable alternative. In contrast to immunoassays, LC-MS methods are capable of providing the analytical prowess necessary to satisfy the demands of peptide biomarker research in the life sciences arena. This review article provides a historical account of the in-roads made by LC-MS technology for the detection of peptide biomarkers in the past 10 years, with the focus on the qualification/quantification developments and their applications.

Advanced Development of Supercritical Fluid Chromatography in Herbal Medicine Analysis

The greatest challenge in the analysis of herbal components lies in their variety and complexity. Therefore, efficient analytical tools for the separation and qualitative and quantitative analysis of multi-components are essential. In recent years, various emerging analytical techniques have offered significant support for complicated component analysis, with breakthroughs in selectivity, sensitivity, and rapid analysis. Among these techniques, supercritical fluid chromatography (SFC) has attracted much attention because of its high column efficiency and environmental protection. SFC can be used to analyze a wide range of compounds, including non-polar and polar compounds, making it a prominent analytical platform. The applicability of SFC for the separation and determination of natural products in herbal medicines is overviewed in this article. The range of applications was expanded through the selection and optimization of stationary phases and mobile phases. We also focus on the two-dimensional SFC analysis. This paper provides new insight into SFC method development for herbal medicine analysis.