Green synthesis and characterization of carbon-based materials for sensitive detection of heavy metal ions

Flexible electronics for heavy metal ion detection in water: a comprehensive review

Flexible electronics offer a versatile, rapid, cost-effective and portable solution to monitor water contamination, which poses serious threat to the environment and human health. This review paper presents a comprehensive exploration of the versatile platforms of flexible electronics in the context of heavy metal ion detection in water systems. The review overviews of the fundamental principles of heavy metal ion detection, surveys the state-of-the-art materials and fabrication techniques for flexible sensors, analyses key performance metrics and limitations, and discusses future opportunities and challenges. By highlighting recent advances in nanomaterials, polymers, wireless integration, and sustainability, this review aims to serve as an essential resource for researchers, engineers, and policy makers seeking to address the critical challenge of heavy metal contamination in water resources. The versatile promise of flexible electronics is thoroughly elucidated to inspire continued innovation in this emerging technology arena.

A new thiacalix[4]arene-based metal-organic framework as an efficient electrochemical sensor for trace detection of Cd2+ and Pb2

Heavy metal ions (HMIs) can lead to serious harm to human health and ecological environment. Thus, developing an efficient detection method for HMIs is extremely necessary. Herein, a new thiacalix[4]arene-based metal-organic framework (MOF) [Co2(L1)(TPA)2]·DMA·3CH3OH·H2O (Co-LTPA) (L1 = thiacalix[4]arene-based ligand and H2TPA = terephthalic acid) was successfully synthesized. The electrochemical detection platform (Co-LTPA/GCE) was acquired, and Co-LTPA/GCE featured ultrasensitive detection of HMIs with greatly low limits of detection (LODs) of 0.119 nM for Cd2+ and 0.279 nM for Pb2+ as well as wide linear ranges of 0.08-5.8 μM for Cd2+ and 0.01-6.0 μM for Pb2+. More importantly, the Co-LTPA/GCE sensor was employed to detect foods (milk, honey and orange juice) and water samples (tap water, lake water and drinking water) with satisfactory recoveries, proving the sensor reliability in practical applications. This work provided an example that the functional electrochemical Co-LTPA/GCE sensor was employed for Cd2+ and Pb2+ detection.

Two-mode sensing strategies based on tunable cobalt metal organic framework active sites to detect Hg2

Heavy metal pollution poses a major threat to human health, and developing a user-deliverable heavy metal detection strategy remains a major challenge. In this work, two-mode Hg2+ sensing platforms based on the tunable cobalt metal-organic framework (Co-MOF) active site strategy are constructed, including a colorimetric, and an electrochemical assay using a personal glucose meter (PGM) as the terminal device. Specifically, thymine (T), a single, adaptable nucleotide, is chosen to replace typical T-rich DNA aptamers. The catalytic sites of Co-MOF are tuned competitively by the specific binding of T-Hg2+-T, and different signal output platforms are developed based on the different enzyme-like activities of Co-MOF. DFT calculations are utilized to analyze the interaction mechanism between T and Co-MOF with defect structure. Notably, the two-mode sensing platforms exhibit outstanding detection performance, with LOD values as low as 0.5 nM (colorimetric) and 3.69 nM (PGM), respectively, superior to recently reported nanozyme-based Hg2+ sensors. In real samples of tap water and lake water, this approach demonstrates an effective recovery rate and outstanding selectivity. Surprisingly, the method is potentially versatile and, by exchanging out T-Hg2+-T, can also detect Ag+. This simple, portable, and user-friendly Hg2+ detection approach shows plenty of promise for application in the future.

An innovative fluorescent probe based on dicyanoisoflurone derivatives for differential detection of Hg2+ and Cu2+ and its applications in bacteria, cell imaging and food analysis

BACKGROUND

Heavy metal pollution has become one of the world's most important environmental pollution, especially Hg2+ is enriched, it is easy to enter the human body through the food chain, bind to the sulfhydryl group in the protein, cause mercury poisoning. Traditional methods for detecting Hg2+ have obvious drawbacks, such as poor selectivity and long detection time. Fluorescence detection has attracted attention because of its good sensitivity and specificity detection ability. In previously reported probes for detecting Hg2+, Cu2+ often interferes. Therefore, it is of great practical significance to synthesize a fluorescent probe that can distinguish between Hg2+ and Cu2+.

RESULTS

We have successfully synthesized the probe DFS, a fluorescent probe that can differentially detect Hg2+ and Cu2+, and the probe DFS has good selectivity and anti-interference ability for Hg2+ and Cu2+. The fluorescence intensity at 530 nm increased rapidly when Hg2+ was detected; during the Cu2+ detection, the fluorescence intensity at 636 nm gradually decreased, fluorescence quenching occurred, and the detection limits of Hg2+ and Cu2+ were 7.29 × 10-9 M and 2.13 × 10-9 M, respectively. Through biological experiments, it was found that probe DFS can complete the fluorescence imaging of Hg2+ and Cu2+ in Staphylococcus aureus and HUVEC cells, which has certain research value in the field of environmental monitoring and microbiology, and the probe DFS has low cytotoxicity, so it also has broad application prospects in the field of biological imaging. In addition, the probe DFS also has good applicability for Hg2+ and Cu2+ detection in actual samples.

SIGNIFICANCE AND NOVELTY

This is a fluorescent probe that can distinguish between Hg2+ and Cu2+, the fluorescence emission peak appears at 530 nm when Hg2+ is detected; when detecting Cu2+, fluorescence quenching occurs at 636 nm, the fluorescence emission peak distance between Hg2+ and Cu2+ differs by 106 nm. This reduces mutual interference between Hg2+ and Cu2+ during detection, it provides a new idea for the detection of Hg2+ and Cu2+.

Green catalyst for clean fuel production via hydrodeoxygenation

The development of new fuel sources to replace nonrenewable fossil fuels has received substantial attention due to the ongoing demand for fossil fuels. Biomass and raw waste materials are crucial sources to produce suitable alternative fuels instead of nonrenewable fuels and offer a greener approach. Therefore, improving the fuel properties of biooils produced from the thermochemical conversion of biomass and raw waste materials is critical as it is used as an alternative to nonrenewable fuel. Developing an economical and eco-friendly method to produce sustainable and renewable oil by improving biooil containing large amounts of phenolic compounds has become imperative. One of the most intriguing and promising technologies for refining biooil to produce renewable fuels of comparable quality to conventional fossil fuels is the hydrodeoxygenation (HDO)-based process for converting biooil to renewable fuels. This method is almost one of the best improving methods described in the literature. At this point, it is of great importance that the HDO process is carried out catalytically. Carbon materials are preferred for both designing catalysts for HDO and supporting metal nanoparticles by providing chemically inert surfaces and tunable functional groups, high surface area and active sites. The HDO of biomass and raw waste materials has significantly advanced thanks to carbon-based catalysts. In this review, the effect of the surface character and catalytic ability of the carbon support, especially prepared by the green synthesis technique, on the HDO reaction during biooil improvement is discussed. Moreover, HDO reaction parameters and recent studies have been investigated in depth. Thus, green carbon catalysts' role in clean fuel production via the HDO process has been clarified.

Sensitive Silver-Enhanced Microplate Apta-Enzyme Assay of Sb3+ Ions in Drinking and Natural Waters

The toxic effects of antimony pose risks to human health. Therefore, simple analytical techniques for its widescale monitoring in water sources are in demand. In this study, a sensitive microplate apta-enzyme assay for Sb3+ detection was developed. The biotinylated aptamer A10 was hybridized with its complementary biotinylated oligonucleotide T10 and then immobilized on the surface of polysterene microplate wells. Streptavidin labeled with horseradish peroxidase (HRP) bound to the biotin of a complementary complex and transformed the 3,3',5,5'-tetramethylbenzidine substrate, generating an optical signal. Sb3+ presenting in the sample bounded to an A10 aptamer, thus releasing T10, preventing streptavidin-HRP binding and, as a result, reducing the optical signal. This effect allowed for the detection of Sb3+ with a working range from 0.09 to 2.3 µg/mL and detection limit of 42 ng/mL. It was established that the presence of Ag+ at the stage of A10/T10 complex formation promoted dehybridization of the aptamer A10 and the formation of the A10/Sb3+ complex. The working range of the Ag+-enhanced microplate apta-enzyme assay for Sb3+ was determined to be 8-135 ng/mL, with a detection limit of 1.9 ng/mL. The proposed enhanced approach demonstrated excellent selectivity against other cations/anions, and its practical applicability was confirmed through an analysis of drinking and spring water samples with recoveries of Sb3+ in the range of 109.0-126.2% and 99.6-106.1%, respectively.

Bi-MOF-Derived Carbon Wrapped Bi Nanoparticles Assembly on Flexible Graphene Paper Electrode for Electrochemical Sensing of Multiple Heavy Metal Ions

The development of nanohybrid with high electrocatalytic activity is of great significance for electrochemical sensing applications. In this work, we develop a novel and facile method to prepare a high-performance flexible nanohybrid paper electrode, based on nitrogen-doped carbon (NC) wrapped Bi nanoparticles (Bi-NPs) assembly derived from Bi-MOF, which are decorated on a flexible and freestanding graphene paper (GP) electrode. The as-obtained Bi-NPs encapsulated by an NC layer are uniform, and the active sites are increased by introducing a nitrogen source while preparing Bi-MOF. Owing to the synergistic effect between the high conductivity of GP electrode and the highly efficient electrocatalytic activity of Bi-NPs, the NC wrapped Bi-NPs (Bi-NPs@NC) modified GP (Bi-NPs@NC/GP) electrode possesses high electrochemically active area, rapid electron-transfer capability, and good electrochemical stability. To demonstrate its outstanding functionality, the Bi-NPs@NC/GP electrode has been integrated into a handheld electrochemical sensor for detecting heavy metal ions. The result shows that Zn²⁺, Cd²⁺, and Pb²⁺ can be detected with extremely low detection limits, wide linear range, high sensitivity, as well as good selectivity. Furthermore, it demonstrates outstanding electrochemical sensing performance in the simultaneous detection of Zn²⁺, Cd²⁺, and Pb²⁺. Finally, the proposed electrochemical sensor has achieved excellent repeatability, reproducibility, stability, and reliability in measuring real water samples, which will have great potential in advanced applications in environmental systems.

Amino-Functionalized Hierarchical Porous Carbon Derived from Zeolitic Imidazolate Frameworks for Ultrasensitive Electrochemical Sensing of Heavy Metals in Water

Electrochemical sensing provides a feasible avenue to monitor heavy metal ions (HMIs) in water, whereas the construction of highly sensitive and selective sensors remains challenging. Herein, we fabricated a novel amino-functionalized hierarchical porous carbon by the template-engaged method using ZIF-8 as the precursor and polystyrene sphere as the template, followed by carbonization and controllable chemical grafting of amino groups for efficient electrochemical detection of HMIs in water. The amino-functionalized hierarchical porous carbon features an ultrathin carbon framework with a high graphitization degree, excellent conductivity, unique macro-, meso-, and microporous architecture, and rich amino groups. As a result, the sensor exhibits prominent electrochemical performance with significantly low limits of detection for individual HMIs (i.e., 0.93 nM for Pb²⁺, 2.9 nM for Cu²⁺, and 1.2 nM for Hg²⁺) and simultaneous detection of HMIs (i.e., 0.62 nM for Pb²⁺, 1.8 nM for Cu²⁺, and 0.85 nM for Hg²⁺), which are superior to most reported sensors in the literature. Moreover, the sensor displays excellent anti-interference ability, repeatability, and stability for HMI detection in actual water samples.

Monitoring Cd2+ in oily wastewater using an aptamer-graphene field-effect transistor with a selective wetting surface

The discharge of oily industrial wastewater containing heavy metal ions with the development of industry severely threatens the environment and human health. Therefore, it is of great significance to monitor the concentration of heavy metal ions in oily wastewater quickly and effectively. Here, an integrated Cd²⁺ monitoring system consisting of an aptamer-graphene field-effect transistor (A-GFET), oleophobic/hydrophilic surface and monitoring-alarm circuits was presented for monitoring the Cd²⁺ concentration in oily wastewater. In the system, oil and other impurities in wastewater are isolated by an oleophobic/hydrophilic membrane before detection. The concentration of Cd²⁺ is then detected by a graphene field-effect transistor with a Cd²⁺ aptamer modifying the graphene channel. Finally, the detected signal is collected and processed by signal processing circuits to judge whether the Cd²⁺ concentration exceeds the standard. Experimental results demonstrated that the separation efficiency of the oleophobic/hydrophilic membrane to an oil/water mixture was up to 99.9%, exhibiting a high oil/water separation ability. The A-GFET detecting platform could respond to changes in the Cd²⁺ concentration within 10 min with a limit of detection (LOD) of 0.125 pM. The sensitivity of this detection platform to Cd²⁺ near 1 nM was 7.643 × 10^-2 nM^-1. Compared with control ions (Cr³⁺, Pb²⁺, Mg²⁺, Fe³⁺), this detection platform exhibited a high specificity to Cd²⁺. Moreover, the system could send out a photoacoustic alarm signal when the Cd²⁺ concentration in the monitoring solution exceeds the preset value. Therefore, the system is practical for monitoring the concentration of heavy metal ions in oily wastewater.

Magnetic Fe3O4 nanoparticles decorated phosphorus-doped biochar-attapulgite/bismuth film electrode for smartphone-operated wireless portable sensing of ultra-trace multiple heavy metal ions

Pollution caused by both forestry wastes and heavy metals has increasingly drawn attention owing to environmental safety concerns. After essential oil is extracted from Cinnamomum camphoras (L.), the branches are used as forestry wastes to prepare a phosphorus-doped biochar-attapulgite/bismuth film electrode decorated with magnetic Fe₃O₄ nanoparticles (MBA-BiFE). The smartphone-operated wireless portable sensor is employed for the simultaneous ultratrace voltammetric detection of multiple heavy metal ions (Cd²⁺, Pb²⁺, and Hg²⁺). Cd²⁺, Pb²⁺, and Hg²⁺ exhibit excellent electrochemical responses in linear ranges of 0.1 nM-5 μM, 0.01 nM-7 μM, and 0.1 nM-3 μM with limits of detection equal to 0.036, 0.003, and 0.011 nM, respectively. The recoveries of MBA-BiFE for Cd²⁺, Pb²⁺, and Hg²⁺ are 93.6-109.9%, 86.0-107.5%, and 94.8-104.6%, respectively, and the RSD values for repeated measurements of Cd²⁺, Pb²⁺, and Hg²⁺ are 4.2%, 2.8%, and 3.3%, respectively. A machine learning model based on an artificial neural network algorithm is constructed to enable a smart determination of ultratrace hazardous multiple metal ions. The portable sensor based on the screen-printed integrated three-electrode sensor modified using MBA-BiFE demonstrates advantages and practicability in outdoor detection, compared with conventional sensors based on MBA-BiFE. This study provides a smartphone-operated wireless portable sensing technique for high-potential applications in environmetallomics or agrometallomics using forestry waste-derived biochar as substrate for electrode preparation. HIGHLIGHTS: • Fe₃O₄ decorated phosphorus-doped biochar-attapulgite/bismuth film electrode. • A smartphone-operated sensor for analysis of multiple heavy metal ions. • An Artificial neural network model for smart analysis of Cd²⁺, Pb²⁺, and Hg²⁺.

New outlook on hazardous pollutants in the wastewater environment: Occurrence, risk assessment and elimination by electrodeionization technologies

Over the decades, water contamination has increased substantially and has become a severe global issue. Degradation of natural resources is taking place at an alarming rate as a result of the use of chemicals like dyes, heavy metals, fertilizers, pesticides, and many more, necessitating the development of long-term pollution remediation methods/technologies. As a new development in the field of environmental engineering, electrodeionization incorporates both traditional ion exchange and electrodialysis. This communication provides an overview of hazardous contaminants such as dyes, heavy metals, fertilizers, and pesticides, as well as their converted forms, which are present in water. It highlights the risks of water pollutants to public health and the environment. Various electrochemical methods with a focus on electrodeionization for the treatment of wastewater and removal of hazardous contaminants are outlined in this review. Additionally, this review discusses the challenges and the future outlook for the development in this field of research.

Development of a push-π-pull phenothiazine-vinyl-isophorone fluorophore: a novel solvatochromic and pH indicator

Knoevenagel condensation of phenothiazine-3,7-dicarbaldehyde with an isophorone yielded a new phenothiazine derivative (PTZ-c) fluorophore. The solvatochromic and pH-sensing abilities of PTZ-c, an asymmetric fluorophore with a single isophorone molecule, were shown to be exceptional. PTZ-c produced very delicate absorbance and emission spectra. When the polarity of the solvent was increased, the PTZ-c emission spectra showed greater sensitivity than the absorption spectra. Multiple spectroscopic techniques, including Fourier transform infrared spectroscopy, nuclear magnetic resonance, and mass spectrometry, were used to characterize the manufactured PTZ-c sensor. To demonstrate the beneficial solvatochromic behaviour associated with intramolecular charge transfer, the absorption spectra of the synthesized DA PTZ-c dye were analyzed in different solvents of varying polarity. Band intensity and the wavelength of PTZ-c emission were also found to be highly solvent dependent. It was observed that when solvent polarity was increased to a maximum of 4122 cm^-1 , Stokes' shift also increased. To analyze the Stokes' shift that depended on the solvent, a linear correlation between solvation and energy was used. An investigation of PTZ-c quantum yield (ф) was also conducted. Both the absorbance and fluorescence spectra of the sensor in dimethylformamide as a function of pH were studied. A fluorescence peak was seen at 562 nm, whereas the greatest absorption wavelengths were found at 403 and 317 nm. It was shown that the pH-sensing mechanism depended on protons removed from the PTZ-c chromophore, which caused a colour shift and variation in both emission and colorimetric properties.

Carbon-polymer dot-based UV absorption and fluorescence performances for heavy metal ion detection

In previous reports, carbon dots (CDs) were customarily used as fluorescent probes to detect heavy metal ions. However, scientists neglected to take advantage of the excellent UV absorption properties of CDs to detect heavy metal ions. Herein, we synthesized nitrogen-containing carbon polymer dots (N-CPDs) for the determination of Co²⁺ ions in water samples by a one-step hydrothermal method using l-histidine and ethylene imine polymer as raw materials. The N-CPDs were characterized by ultraviolet-visible spectrum (UV-vis), infrared spectrum (FT-IR), X-ray photoelectron spectrum (XPS) and transmission electron microscopy (TEM) techniques. They possess superior full-band UV absorption performance and the surface is rich in multifunctional groups such as -COOH, -CN-, -OH, etc. When Co²⁺ was added to N-CPDs solution, the color of the solution rapidly changed from colorless to yellow-brown, which was visible to the naked eye. The UV absorption intensity of N-CPDs changed, and the fluorescence was instantly quenched, due to the formation of chelate between Co²⁺ and N-CPDs, and the FRET process occurred. The detection of Co²⁺ showed good linearity for both fluorescence and UV absorption spectroscopy modes in the range of 0-200 μM, and the limit of detection were 1.0023 μM and 0.75 μM, respectively. These two methods have the advantages of simple operation, remarkable selectivity and small sample size, which can be applied to the field detection of Co²⁺ in water samples. It is possible to develop the UV absorption properties of CDs to detect the ions.

Sensitive, Selective and Reliable Detection of Fe3+ in Lake Water via Carbon Dots-Based Fluorescence Assay

In this study, C-dots were facilely synthesized via microwave irradiation using citric acid and ethylenediamine as carbon precursors. The fluorescence emissions of the C-dots could be selectively quenched by Fe³⁺, and the degree of quenching was linearly related to the concentrations of Fe³⁺ presented. This phenomenon was utilized to develop a sensitive fluorescence assay for Fe³⁺ detection with broad linear range (0–250, 250–1200 μmol/L) and low detection limit (1.68 μmol/L). Most importantly, the assay demonstrated high reliability towards samples in deionized water, tap water and lake water, which should find potential applications for Fe³⁺ monitoring in complicated environments.

Efficient and selective removal of Pb2+ from aqueous solution by using an O- functionalized metal-organic framework

Lead (Pb) is one of the most widespread and highly toxic heavy metals in the environment. The design and synthesis of adsorbent materials for the selective and efficient removal of Pb²⁺ from aqueous solution has received much attention. Herein, the ligand 4,4'-azoxydibenzoic acid with the O^- group was elaborately selected to construct a novel Pr-based MOF for Pb²⁺ removal. The as-prepared MOF adsorbents with high stability exhibited ultra-high selectivity for Pb²⁺, even in the presence of various highly concentrated competitive ions (with the ratios from 1 : 5 to 1 : 50). Also, a high uptake capacity (560.26 mg g^-1) can be achieved for the MOF material, due to the availability of sufficient adsorption sites. The strong electrostatic attraction and coordination interaction between the numerous active O^- sites on MOF adsorbents and Pb²⁺ can account for the good adsorption performance for Pb²⁺, which was systematically verified by zeta potential, FT-IR and XPS studies.

An Electroanalytical Solution for the Determination of Pb2+ in Progressive Hair Dyes Using the Cork-Graphite Sensor

Lead is one of the most toxic metals for living organisms: once absorbed by soft tissues, it is capable of triggering various pathologies, subsequently bioaccumulating in the bones. In consideration of this, its detection and quantification in products for human consumption and use is of great interest, especially if the procedure can be carried out in an easy, reproducible and economical way. This work presents the results of the electroanalytical determination of lead in three different commercial products used as progressive hair dyes. Analyses were performed by cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV) using a composite cork–graphite sensor in 0.5M H₂SO₄ solution or 0.1M acetate buffer (pH 4.5), in the presence and absence of hair dye samples. The H₂SO₄ solution gave better results in terms of analyte sensitivity than the acetate buffer electrolyte. In both cases, well-defined signals for lead were obtained by DPSV analyses, enabling the calibration curve and figures of merit to be determined. The limits of detection (LOD) were found to be approximately 1.06 µM and 1.26 µM in H₂SO₄ and acetate buffer, respectively. The DPSV standard addition method was successfully applied to quantify the lead in hair dye samples, yielding values below 0.45% in Pb. All three analyzed samples were shown to comply with the limit set by the Brazilian Health Regulatory Agency, i.e., 0.6% lead in this type of product. The comparison of the electroanalytical results with those obtained by the reference method, based on the use of inductively coupled plasma optical emission spectrometry (ICP–OES), confirmed that the electroanalytical detection approach is potentially applicable as a strategy for quality control.